diff options
Diffstat (limited to 'doc/device-tree-bindings')
| -rw-r--r-- | doc/device-tree-bindings/gpio/intel,apl-gpio.txt | 55 | ||||
| -rw-r--r-- | doc/device-tree-bindings/pci/x86-pci.txt | 24 | ||||
| -rw-r--r-- | doc/device-tree-bindings/pinctrl/intel,apl-pinctrl.txt | 39 |
3 files changed, 118 insertions, 0 deletions
diff --git a/doc/device-tree-bindings/gpio/intel,apl-gpio.txt b/doc/device-tree-bindings/gpio/intel,apl-gpio.txt new file mode 100644 index 0000000000..e27a40b437 --- /dev/null +++ b/doc/device-tree-bindings/gpio/intel,apl-gpio.txt @@ -0,0 +1,55 @@ +Intel Apollo Lake GPIO controller + +The Apollo Lake (APL) GPIO controller is used to control GPIO functions of +the pins. + +Required properties: +- compatible: "intel,apl-gpio" +- #gpio-cells: Should be 2. The syntax of the gpio specifier used by client + nodes should be the following with values derived from the SoC user manual. + <[phandle of the gpio controller node] + [pin number within the gpio controller] + [flags]> + + Values for gpio specifier: + - Pin number: is a GPIO pin number between 0 and 244 + - Flags: GPIO_ACTIVE_HIGH or GPIO_ACTIVE_LOW + +- gpio-controller: Specifies that the node is a gpio controller. + +Example: + +... +{ + p2sb: p2sb@d,0 { + reg = <0x02006810 0 0 0 0>; + compatible = "intel,apl-p2sb"; + early-regs = <IOMAP_P2SB_BAR 0x100000>; + + north { + compatible = "intel,apl-pinctrl"; + intel,p2sb-port-id = <PID_GPIO_N>; + gpio_n: gpio-n { + compatible = "intel,gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; + + i2c_2: i2c2@16,2 { + compatible = "intel,apl-i2c", "snps,designware-i2c-pci"; + reg = <0x0200b210 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + clock-frequency = <400000>; + tpm@50 { + reg = <0x50>; + compatible = "google,cr50"; + u-boot,i2c-offset-len = <0>; + ready-gpio = <&gpio_n GPIO_28 GPIO_ACTIVE_LOW>; + }; + }; + +}; +... diff --git a/doc/device-tree-bindings/pci/x86-pci.txt b/doc/device-tree-bindings/pci/x86-pci.txt new file mode 100644 index 0000000000..3aa5bd9a46 --- /dev/null +++ b/doc/device-tree-bindings/pci/x86-pci.txt @@ -0,0 +1,24 @@ +x86 PCI DT details: +=================== + +Some options are available to affect how PCI operates on x86. + +Optional properties: +- u-boot,skip-auto-config-until-reloc : Don't set up PCI configuration until + after U-Boot has relocated. Normally if PCI is used before relocation, + this happens before relocation also. Some platforms set up static + configuration in TPL/SPL to reduce code size and boot time, since these + phases only know about a small subset of PCI devices. + +Example: + +pci { + compatible = "pci-x86"; + #address-cells = <3>; + #size-cells = <2>; + u-boot,dm-pre-reloc; + ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0 0x10000000 + 0x42000000 0x0 0xb0000000 0xb0000000 0 0x10000000 + 0x01000000 0x0 0x1000 0x1000 0 0xefff>; + u-boot,skip-auto-config-until-reloc; +}; diff --git a/doc/device-tree-bindings/pinctrl/intel,apl-pinctrl.txt b/doc/device-tree-bindings/pinctrl/intel,apl-pinctrl.txt new file mode 100644 index 0000000000..cd7f8a0ca3 --- /dev/null +++ b/doc/device-tree-bindings/pinctrl/intel,apl-pinctrl.txt @@ -0,0 +1,39 @@ +* Intel Apollo Lake pin controller + +The Apollo Lake (APL) pin controller is used to select the function of a pin +and to configure it. + +Required properties: +- compatible: "intel,apl-pinctrl" +- intel,p2sb-port-id: Port ID number within the parent P2SB +- reg: PCI address of the controller + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices. + +Optional subnodes: + +GPIO nodes may be added as children of the pinctrl nodes. See intel,apl-gpio +for the binding. + + +Example: + +... +{ + p2sb: p2sb@d,0 { + reg = <0x02006810 0 0 0 0>; + compatible = "intel,apl-p2sb"; + early-regs = <IOMAP_P2SB_BAR 0x100000>; + + n { + compatible = "intel,apl-pinctrl"; + intel,p2sb-port-id = <PID_GPIO_N>; + gpio_n: gpio-n { + compatible = "intel,apl-gpio"; + #gpio-cells = <2>; + }; + }; + }; +}; +... |