diff options
Diffstat (limited to 'drivers/clk/rockchip/clk_rk3288.c')
| -rw-r--r-- | drivers/clk/rockchip/clk_rk3288.c | 108 |
1 files changed, 100 insertions, 8 deletions
diff --git a/drivers/clk/rockchip/clk_rk3288.c b/drivers/clk/rockchip/clk_rk3288.c index b64c1071c1..552a71a82f 100644 --- a/drivers/clk/rockchip/clk_rk3288.c +++ b/drivers/clk/rockchip/clk_rk3288.c @@ -295,15 +295,42 @@ static int pll_para_config(ulong freq_hz, struct pll_div *div, uint *ext_div) return 0; } -static int rockchip_mac_set_clk(struct rk3288_cru *cru, - int periph, uint freq) +static int rockchip_mac_set_clk(struct rk3288_cru *cru, uint freq) { - /* Assuming mac_clk is fed by an external clock */ - rk_clrsetreg(&cru->cru_clksel_con[21], - RMII_EXTCLK_MASK, - RMII_EXTCLK_SELECT_EXT_CLK << RMII_EXTCLK_SHIFT); + ulong ret; + + /* + * The gmac clock can be derived either from an external clock + * or can be generated from internally by a divider from SCLK_MAC. + */ + if (readl(&cru->cru_clksel_con[21]) & RMII_EXTCLK_MASK) { + /* An external clock will always generate the right rate... */ + ret = freq; + } else { + u32 con = readl(&cru->cru_clksel_con[21]); + ulong pll_rate; + u8 div; + + if (((con >> EMAC_PLL_SHIFT) & EMAC_PLL_MASK) == + EMAC_PLL_SELECT_GENERAL) + pll_rate = GPLL_HZ; + else if (((con >> EMAC_PLL_SHIFT) & EMAC_PLL_MASK) == + EMAC_PLL_SELECT_CODEC) + pll_rate = CPLL_HZ; + else + pll_rate = NPLL_HZ; + + div = DIV_ROUND_UP(pll_rate, freq) - 1; + if (div <= 0x1f) + rk_clrsetreg(&cru->cru_clksel_con[21], MAC_DIV_CON_MASK, + div << MAC_DIV_CON_SHIFT); + else + debug("Unsupported div for gmac:%d\n", div); + + return DIV_TO_RATE(pll_rate, div); + } - return 0; + return ret; } static int rockchip_vop_set_clk(struct rk3288_cru *cru, struct rk3288_grf *grf, @@ -744,7 +771,7 @@ static ulong rk3288_clk_set_rate(struct clk *clk, ulong rate) break; #ifndef CONFIG_SPL_BUILD case SCLK_MAC: - new_rate = rockchip_mac_set_clk(priv->cru, clk->id, rate); + new_rate = rockchip_mac_set_clk(priv->cru, rate); break; case DCLK_VOP0: case DCLK_VOP1: @@ -797,6 +824,17 @@ static ulong rk3288_clk_set_rate(struct clk *clk, ulong rate) case SCLK_SARADC: new_rate = rockchip_saradc_set_clk(priv->cru, rate); break; + case PLL_GPLL: + case PLL_CPLL: + case PLL_NPLL: + case ACLK_CPU: + case HCLK_CPU: + case PCLK_CPU: + case ACLK_PERI: + case HCLK_PERI: + case PCLK_PERI: + case SCLK_UART0: + return 0; default: return -ENOENT; } @@ -804,9 +842,63 @@ static ulong rk3288_clk_set_rate(struct clk *clk, ulong rate) return new_rate; } +static int __maybe_unused rk3288_gmac_set_parent(struct clk *clk, struct clk *parent) +{ + struct rk3288_clk_priv *priv = dev_get_priv(clk->dev); + struct rk3288_cru *cru = priv->cru; + const char *clock_output_name; + int ret; + + /* + * If the requested parent is in the same clock-controller and + * the id is SCLK_MAC_PLL ("mac_pll_src"), switch to the internal + * clock. + */ + if ((parent->dev == clk->dev) && (parent->id == SCLK_MAC_PLL)) { + debug("%s: switching GAMC to SCLK_MAC_PLL\n", __func__); + rk_clrsetreg(&cru->cru_clksel_con[21], RMII_EXTCLK_MASK, 0); + return 0; + } + + /* + * Otherwise, we need to check the clock-output-names of the + * requested parent to see if the requested id is "ext_gmac". + */ + ret = dev_read_string_index(parent->dev, "clock-output-names", + parent->id, &clock_output_name); + if (ret < 0) + return -ENODATA; + + /* If this is "ext_gmac", switch to the external clock input */ + if (!strcmp(clock_output_name, "ext_gmac")) { + debug("%s: switching GMAC to external clock\n", __func__); + rk_clrsetreg(&cru->cru_clksel_con[21], RMII_EXTCLK_MASK, + RMII_EXTCLK_SELECT_EXT_CLK << RMII_EXTCLK_SHIFT); + return 0; + } + + return -EINVAL; +} + +static int __maybe_unused rk3288_clk_set_parent(struct clk *clk, struct clk *parent) +{ + switch (clk->id) { + case SCLK_MAC: + return rk3288_gmac_set_parent(clk, parent); + case SCLK_USBPHY480M_SRC: + return 0; + } + + debug("%s: unsupported clk %ld\n", __func__, clk->id); + return -ENOENT; +} + static struct clk_ops rk3288_clk_ops = { .get_rate = rk3288_clk_get_rate, .set_rate = rk3288_clk_set_rate, +#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) + .set_parent = rk3288_clk_set_parent, +#endif }; static int rk3288_clk_ofdata_to_platdata(struct udevice *dev) |