summaryrefslogtreecommitdiff
path: root/drivers/ddr/fsl/mpc85xx_ddr_gen3.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ddr/fsl/mpc85xx_ddr_gen3.c')
-rw-r--r--drivers/ddr/fsl/mpc85xx_ddr_gen3.c54
1 files changed, 53 insertions, 1 deletions
diff --git a/drivers/ddr/fsl/mpc85xx_ddr_gen3.c b/drivers/ddr/fsl/mpc85xx_ddr_gen3.c
index ab8d2deaf9..1ed4d50cc7 100644
--- a/drivers/ddr/fsl/mpc85xx_ddr_gen3.c
+++ b/drivers/ddr/fsl/mpc85xx_ddr_gen3.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright 2008-2012 Freescale Semiconductor, Inc.
+ * Copyright 2008-2020 Freescale Semiconductor, Inc.
*/
#include <common.h>
@@ -40,6 +40,15 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
#ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003
u32 save1, save2;
#endif
+#if defined(CONFIG_SYS_FSL_ERRATUM_A009942) || \
+ (defined(CONFIG_SYS_FSL_ERRATUM_A008378) && \
+ defined(CONFIG_SYS_FSL_DDRC_GEN4)) || \
+ defined(CONFIG_SYS_FSL_ERRATUM_A008109)
+ u32 val32;
+#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009942
+ unsigned int ddr_freq;
+#endif
switch (ctrl_num) {
case 0:
@@ -338,6 +347,49 @@ step2:
}
#endif
+
+#if defined(CONFIG_SYS_FSL_ERRATUM_A008378) && defined(CONFIG_SYS_FSL_DDRC_GEN4)
+ /* Erratum applies when accumulated ECC is used, or DBI is enabled */
+#define IS_ACC_ECC_EN(v) ((v) & 0x4)
+#define IS_DBI(v) ((((v) >> 12) & 0x3) == 0x2)
+ if (has_erratum_a008378()) {
+ if (IS_ACC_ECC_EN(regs->ddr_sdram_cfg) ||
+ IS_DBI(regs->ddr_sdram_cfg_3)) {
+ val32 = ddr_in32(&ddr->debug[28]);
+ val32 |= (0x9 << 20);
+ ddr_out32(&ddr->debug[28], val32);
+ }
+ debug("Applied errata CONFIG_SYS_FSL_ERRATUM_A008378\n");
+ }
+#endif
+
+#if defined(CONFIG_SYS_FSL_ERRATUM_A008109)
+ val32 = in_be32(&ddr->sdram_cfg_2) | 0x800; /* DDR_SLOW */
+ out_be32(&ddr->sdram_cfg_2, val32);
+
+ val32 = in_be32(&ddr->debug[18]) | 0x2;
+ out_be32(&ddr->debug[18], val32);
+
+ out_be32(&ddr->debug[28], 0x30000000);
+ debug("Applied errta CONFIG_SYS_FSL_ERRATUM_A008109\n");
+#endif
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A009942
+ ddr_freq = get_ddr_freq(ctrl_num) / 1000000;
+ val32 = in_be32(&ddr->debug[28]);
+ val32 &= 0xff0fff00;
+ if (ddr_freq <= 1333)
+ val32 |= 0x0080006a;
+ else if (ddr_freq <= 1600)
+ val32 |= 0x0070006f;
+ else if (ddr_freq <= 1867)
+ val32 |= 0x00700076;
+ else if (ddr_freq <= 2133)
+ val32 |= 0x0060007b;
+
+ out_be32(&ddr->debug[28], val32);
+ debug("Applied errata CONFIG_SYS_FSL_ERRATUM_A009942\n");
+#endif
/*
* For 8572 DDR1 erratum - DDR controller may enter illegal state
* when operatiing in 32-bit bus mode with 4-beat bursts,