diff options
Diffstat (limited to 'drivers/ddr/marvell/axp/ddr3_init.c')
| -rw-r--r-- | drivers/ddr/marvell/axp/ddr3_init.c | 1219 |
1 files changed, 1219 insertions, 0 deletions
diff --git a/drivers/ddr/marvell/axp/ddr3_init.c b/drivers/ddr/marvell/axp/ddr3_init.c new file mode 100644 index 0000000000..11b85916b7 --- /dev/null +++ b/drivers/ddr/marvell/axp/ddr3_init.c @@ -0,0 +1,1219 @@ +/* + * Copyright (C) Marvell International Ltd. and its affiliates + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include <common.h> +#include <i2c.h> +#include <spl.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/soc.h> + +#include "ddr3_init.h" + +#if defined(MV88F78X60) +#include "ddr3_axp_vars.h" +#elif defined(MV88F67XX) +#include "ddr3_a370_vars.h" +#elif defined(MV88F672X) +#include "ddr3_a375_vars.h" +#endif + +#ifdef STATIC_TRAINING +static void ddr3_static_training_init(void); +#endif +#ifdef DUNIT_STATIC +static void ddr3_static_mc_init(void); +#endif +#if defined(DUNIT_STATIC) || defined(STATIC_TRAINING) +MV_DRAM_MODES *ddr3_get_static_ddr_mode(void); +#endif +#if defined(MV88F672X) +void get_target_freq(u32 freq_mode, u32 *ddr_freq, u32 *hclk_ps); +#endif +u32 mv_board_id_get(void); +extern void ddr3_set_sw_wl_rl_debug(u32); +extern void ddr3_set_pbs(u32); +extern void ddr3_set_log_level(u32 val); + +static u32 log_level = DDR3_LOG_LEVEL; + +static u32 ddr3_init_main(void); + +/* + * Name: ddr3_set_log_level + * Desc: This routine initialize the log_level acording to nLogLevel + * which getting from user + * Args: nLogLevel + * Notes: + * Returns: None. + */ +void ddr3_set_log_level(u32 val) +{ + log_level = val; +} + +/* + * Name: ddr3_get_log_level + * Desc: This routine returns the log level + * Args: none + * Notes: + * Returns: log level. + */ +u32 ddr3_get_log_level(void) +{ + return log_level; +} + +static void debug_print_reg(u32 reg) +{ + printf("0x%08x = 0x%08x\n", reg, reg_read(reg)); +} + +static void print_dunit_setup(void) +{ + puts("\n########### LOG LEVEL 1 (D-UNIT SETUP)###########\n"); + +#ifdef DUNIT_STATIC + puts("\nStatic D-UNIT Setup:\n"); +#endif +#ifdef DUNIT_SPD + puts("\nDynamic(using SPD) D-UNIT Setup:\n"); +#endif + debug_print_reg(REG_SDRAM_CONFIG_ADDR); + debug_print_reg(REG_DUNIT_CTRL_LOW_ADDR); + debug_print_reg(REG_SDRAM_TIMING_LOW_ADDR); + debug_print_reg(REG_SDRAM_TIMING_HIGH_ADDR); + debug_print_reg(REG_SDRAM_ADDRESS_CTRL_ADDR); + debug_print_reg(REG_SDRAM_OPEN_PAGES_ADDR); + debug_print_reg(REG_SDRAM_OPERATION_ADDR); + debug_print_reg(REG_SDRAM_MODE_ADDR); + debug_print_reg(REG_SDRAM_EXT_MODE_ADDR); + debug_print_reg(REG_DDR_CONT_HIGH_ADDR); + debug_print_reg(REG_ODT_TIME_LOW_ADDR); + debug_print_reg(REG_SDRAM_ERROR_ADDR); + debug_print_reg(REG_SDRAM_AUTO_PWR_SAVE_ADDR); + debug_print_reg(REG_OUDDR3_TIMING_ADDR); + debug_print_reg(REG_ODT_TIME_HIGH_ADDR); + debug_print_reg(REG_SDRAM_ODT_CTRL_LOW_ADDR); + debug_print_reg(REG_SDRAM_ODT_CTRL_HIGH_ADDR); + debug_print_reg(REG_DUNIT_ODT_CTRL_ADDR); +#ifndef MV88F67XX + debug_print_reg(REG_DRAM_FIFO_CTRL_ADDR); + debug_print_reg(REG_DRAM_AXI_CTRL_ADDR); + debug_print_reg(REG_DRAM_ADDR_CTRL_DRIVE_STRENGTH_ADDR); + debug_print_reg(REG_DRAM_DATA_DQS_DRIVE_STRENGTH_ADDR); + debug_print_reg(REG_DRAM_VER_CAL_MACHINE_CTRL_ADDR); + debug_print_reg(REG_DRAM_MAIN_PADS_CAL_ADDR); + debug_print_reg(REG_DRAM_HOR_CAL_MACHINE_CTRL_ADDR); + debug_print_reg(REG_CS_SIZE_SCRATCH_ADDR); + debug_print_reg(REG_DYNAMIC_POWER_SAVE_ADDR); + debug_print_reg(REG_READ_DATA_SAMPLE_DELAYS_ADDR); + debug_print_reg(REG_READ_DATA_READY_DELAYS_ADDR); + debug_print_reg(REG_DDR3_MR0_ADDR); + debug_print_reg(REG_DDR3_MR1_ADDR); + debug_print_reg(REG_DDR3_MR2_ADDR); + debug_print_reg(REG_DDR3_MR3_ADDR); + debug_print_reg(REG_DDR3_RANK_CTRL_ADDR); + debug_print_reg(REG_DRAM_PHY_CONFIG_ADDR); + debug_print_reg(REG_STATIC_DRAM_DLB_CONTROL); + debug_print_reg(DLB_BUS_OPTIMIZATION_WEIGHTS_REG); + debug_print_reg(DLB_AGING_REGISTER); + debug_print_reg(DLB_EVICTION_CONTROL_REG); + debug_print_reg(DLB_EVICTION_TIMERS_REGISTER_REG); +#if defined(MV88F672X) + debug_print_reg(REG_FASTPATH_WIN_CTRL_ADDR(0)); + debug_print_reg(REG_FASTPATH_WIN_BASE_ADDR(0)); + debug_print_reg(REG_FASTPATH_WIN_CTRL_ADDR(1)); + debug_print_reg(REG_FASTPATH_WIN_BASE_ADDR(1)); +#else + debug_print_reg(REG_FASTPATH_WIN_0_CTRL_ADDR); +#endif + debug_print_reg(REG_CDI_CONFIG_ADDR); +#endif +} + +#if !defined(STATIC_TRAINING) +static void ddr3_restore_and_set_final_windows(u32 *win_backup) +{ + u32 ui, reg, cs; + u32 win_ctrl_reg, num_of_win_regs; + u32 cs_ena = ddr3_get_cs_ena_from_reg(); + +#if defined(MV88F672X) + if (DDR3_FAST_PATH_EN == 0) + return; +#endif + +#if defined(MV88F672X) + win_ctrl_reg = REG_XBAR_WIN_16_CTRL_ADDR; + num_of_win_regs = 8; +#else + win_ctrl_reg = REG_XBAR_WIN_4_CTRL_ADDR; + num_of_win_regs = 16; +#endif + + /* Return XBAR windows 4-7 or 16-19 init configuration */ + for (ui = 0; ui < num_of_win_regs; ui++) + reg_write((win_ctrl_reg + 0x4 * ui), win_backup[ui]); + + DEBUG_INIT_FULL_S("DDR3 Training Sequence - Switching XBAR Window to FastPath Window\n"); + +#if defined(MV88F672X) + /* Set L2 filtering to 1G */ + reg_write(0x8c04, 0x40000000); + + /* Open fast path windows */ + for (cs = 0; cs < MAX_CS; cs++) { + if (cs_ena & (1 << cs)) { + /* set fast path window control for the cs */ + reg = 0x1FFFFFE1; + reg |= (cs << 2); + reg |= (SDRAM_CS_SIZE & 0xFFFF0000); + /* Open fast path Window */ + reg_write(REG_FASTPATH_WIN_CTRL_ADDR(cs), reg); + /* set fast path window base address for the cs */ + reg = (((SDRAM_CS_SIZE + 1) * cs) & 0xFFFF0000); + /* Set base address */ + reg_write(REG_FASTPATH_WIN_BASE_ADDR(cs), reg); + } + } +#else + reg = 0x1FFFFFE1; + for (cs = 0; cs < MAX_CS; cs++) { + if (cs_ena & (1 << cs)) { + reg |= (cs << 2); + break; + } + } + + /* Open fast path Window to - 0.5G */ + reg_write(REG_FASTPATH_WIN_0_CTRL_ADDR, reg); +#endif +} + +static void ddr3_save_and_set_training_windows(u32 *win_backup) +{ + u32 cs_ena = ddr3_get_cs_ena_from_reg(); + u32 reg, tmp_count, cs, ui; + u32 win_ctrl_reg, win_base_reg, win_remap_reg; + u32 num_of_win_regs, win_jump_index; + +#if defined(MV88F672X) + /* Disable L2 filtering */ + reg_write(0x8c04, 0); + + win_ctrl_reg = REG_XBAR_WIN_16_CTRL_ADDR; + win_base_reg = REG_XBAR_WIN_16_BASE_ADDR; + win_remap_reg = REG_XBAR_WIN_16_REMAP_ADDR; + win_jump_index = 0x8; + num_of_win_regs = 8; +#else + win_ctrl_reg = REG_XBAR_WIN_4_CTRL_ADDR; + win_base_reg = REG_XBAR_WIN_4_BASE_ADDR; + win_remap_reg = REG_XBAR_WIN_4_REMAP_ADDR; + win_jump_index = 0x10; + num_of_win_regs = 16; +#endif + + /* Close XBAR Window 19 - Not needed */ + /* {0x000200e8} - Open Mbus Window - 2G */ + reg_write(REG_XBAR_WIN_19_CTRL_ADDR, 0); + + /* Save XBAR Windows 4-19 init configurations */ + for (ui = 0; ui < num_of_win_regs; ui++) + win_backup[ui] = reg_read(win_ctrl_reg + 0x4 * ui); + + /* Open XBAR Windows 4-7 or 16-19 for other CS */ + reg = 0; + tmp_count = 0; + for (cs = 0; cs < MAX_CS; cs++) { + if (cs_ena & (1 << cs)) { + switch (cs) { + case 0: + reg = 0x0E00; + break; + case 1: + reg = 0x0D00; + break; + case 2: + reg = 0x0B00; + break; + case 3: + reg = 0x0700; + break; + } + reg |= (1 << 0); + reg |= (SDRAM_CS_SIZE & 0xFFFF0000); + + reg_write(win_ctrl_reg + win_jump_index * tmp_count, + reg); + reg = ((SDRAM_CS_SIZE + 1) * (tmp_count)) & 0xFFFF0000; + reg_write(win_base_reg + win_jump_index * tmp_count, + reg); + + if (win_remap_reg <= REG_XBAR_WIN_7_REMAP_ADDR) { + reg_write(win_remap_reg + + win_jump_index * tmp_count, 0); + } + + tmp_count++; + } + } +} +#endif /* !defined(STATIC_TRAINING) */ + +/* + * Name: ddr3_init - Main DDR3 Init function + * Desc: This routine initialize the DDR3 MC and runs HW training. + * Args: None. + * Notes: + * Returns: None. + */ +int ddr3_init(void) +{ + unsigned int status; + + ddr3_set_pbs(DDR3_PBS); + ddr3_set_sw_wl_rl_debug(DDR3_RUN_SW_WHEN_HW_FAIL); + + status = ddr3_init_main(); + if (status == MV_DDR3_TRAINING_ERR_BAD_SAR) + DEBUG_INIT_S("DDR3 Training Error: Bad sample at reset"); + if (status == MV_DDR3_TRAINING_ERR_BAD_DIMM_SETUP) + DEBUG_INIT_S("DDR3 Training Error: Bad DIMM setup"); + if (status == MV_DDR3_TRAINING_ERR_MAX_CS_LIMIT) + DEBUG_INIT_S("DDR3 Training Error: Max CS limit"); + if (status == MV_DDR3_TRAINING_ERR_MAX_ENA_CS_LIMIT) + DEBUG_INIT_S("DDR3 Training Error: Max enable CS limit"); + if (status == MV_DDR3_TRAINING_ERR_BAD_R_DIMM_SETUP) + DEBUG_INIT_S("DDR3 Training Error: Bad R-DIMM setup"); + if (status == MV_DDR3_TRAINING_ERR_TWSI_FAIL) + DEBUG_INIT_S("DDR3 Training Error: TWSI failure"); + if (status == MV_DDR3_TRAINING_ERR_DIMM_TYPE_NO_MATCH) + DEBUG_INIT_S("DDR3 Training Error: DIMM type no match"); + if (status == MV_DDR3_TRAINING_ERR_TWSI_BAD_TYPE) + DEBUG_INIT_S("DDR3 Training Error: TWSI bad type"); + if (status == MV_DDR3_TRAINING_ERR_BUS_WIDTH_NOT_MATCH) + DEBUG_INIT_S("DDR3 Training Error: bus width no match"); + if (status > MV_DDR3_TRAINING_ERR_HW_FAIL_BASE) + DEBUG_INIT_C("DDR3 Training Error: HW Failure 0x", status, 8); + + return status; +} + +static void print_ddr_target_freq(u32 cpu_freq, u32 fab_opt) +{ + puts("\nDDR3 Training Sequence - Run DDR3 at "); + + switch (cpu_freq) { +#if defined(MV88F672X) + case 21: + puts("533 Mhz\n"); + break; +#else + case 1: + puts("533 Mhz\n"); + break; + case 2: + if (fab_opt == 5) + puts("600 Mhz\n"); + if (fab_opt == 9) + puts("400 Mhz\n"); + break; + case 3: + puts("667 Mhz\n"); + break; + case 4: + if (fab_opt == 5) + puts("750 Mhz\n"); + if (fab_opt == 9) + puts("500 Mhz\n"); + break; + case 0xa: + puts("400 Mhz\n"); + break; + case 0xb: + if (fab_opt == 5) + puts("800 Mhz\n"); + if (fab_opt == 9) + puts("553 Mhz\n"); + if (fab_opt == 0xA) + puts("640 Mhz\n"); + break; +#endif + default: + puts("NOT DEFINED FREQ\n"); + } +} + +static u32 ddr3_init_main(void) +{ + u32 target_freq; + u32 reg = 0; + u32 cpu_freq, fab_opt, hclk_time_ps, soc_num; + __maybe_unused u32 ecc = DRAM_ECC; + __maybe_unused int dqs_clk_aligned = 0; + __maybe_unused u32 scrub_offs, scrub_size; + __maybe_unused u32 ddr_width = BUS_WIDTH; + __maybe_unused int status; + __maybe_unused u32 win_backup[16]; + + /* SoC/Board special Initializtions */ + fab_opt = ddr3_get_fab_opt(); + +#ifdef CONFIG_SPD_EEPROM + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); +#endif + + ddr3_print_version(); + DEBUG_INIT_S("4\n"); + /* Lib version 5.5.4 */ + + fab_opt = ddr3_get_fab_opt(); + + /* Switching CPU to MRVL ID */ + soc_num = (reg_read(REG_SAMPLE_RESET_HIGH_ADDR) & SAR1_CPU_CORE_MASK) >> + SAR1_CPU_CORE_OFFSET; + switch (soc_num) { + case 0x3: + reg_bit_set(CPU_CONFIGURATION_REG(3), CPU_MRVL_ID_OFFSET); + reg_bit_set(CPU_CONFIGURATION_REG(2), CPU_MRVL_ID_OFFSET); + case 0x1: + reg_bit_set(CPU_CONFIGURATION_REG(1), CPU_MRVL_ID_OFFSET); + case 0x0: + reg_bit_set(CPU_CONFIGURATION_REG(0), CPU_MRVL_ID_OFFSET); + default: + break; + } + + /* Power down deskew PLL */ +#if !defined(MV88F672X) + /* 0x18780 [25] */ + reg = (reg_read(REG_DDRPHY_APLL_CTRL_ADDR) & ~(1 << 25)); + reg_write(REG_DDRPHY_APLL_CTRL_ADDR, reg); +#endif + + /* + * Stage 0 - Set board configuration + */ + cpu_freq = ddr3_get_cpu_freq(); + if (fab_opt > FAB_OPT) + fab_opt = FAB_OPT - 1; + + if (ddr3_get_log_level() > 0) + print_ddr_target_freq(cpu_freq, fab_opt); + +#if defined(MV88F672X) + get_target_freq(cpu_freq, &target_freq, &hclk_time_ps); +#else + target_freq = cpu_ddr_ratios[fab_opt][cpu_freq]; + hclk_time_ps = cpu_fab_clk_to_hclk[fab_opt][cpu_freq]; +#endif + if ((target_freq == 0) || (hclk_time_ps == 0)) { + DEBUG_INIT_S("DDR3 Training Sequence - FAILED - Wrong Sample at Reset Configurations\n"); + if (target_freq == 0) { + DEBUG_INIT_C("target_freq", target_freq, 2); + DEBUG_INIT_C("fab_opt", fab_opt, 2); + DEBUG_INIT_C("cpu_freq", cpu_freq, 2); + } else if (hclk_time_ps == 0) { + DEBUG_INIT_C("hclk_time_ps", hclk_time_ps, 2); + DEBUG_INIT_C("fab_opt", fab_opt, 2); + DEBUG_INIT_C("cpu_freq", cpu_freq, 2); + } + + return MV_DDR3_TRAINING_ERR_BAD_SAR; + } + +#if defined(ECC_SUPPORT) + scrub_offs = U_BOOT_START_ADDR; + scrub_size = U_BOOT_SCRUB_SIZE; +#else + scrub_offs = 0; + scrub_size = 0; +#endif + +#if defined(ECC_SUPPORT) && defined(AUTO_DETECTION_SUPPORT) + ecc = DRAM_ECC; +#endif + +#if defined(ECC_SUPPORT) && defined(AUTO_DETECTION_SUPPORT) + ecc = 0; + if (ddr3_check_config(BUS_WIDTH_ECC_TWSI_ADDR, CONFIG_ECC)) + ecc = 1; +#endif + +#ifdef DQS_CLK_ALIGNED + dqs_clk_aligned = 1; +#endif + + /* Check if DRAM is already initialized */ + if (reg_read(REG_BOOTROM_ROUTINE_ADDR) & + (1 << REG_BOOTROM_ROUTINE_DRAM_INIT_OFFS)) { + DEBUG_INIT_S("DDR3 Training Sequence - 2nd boot - Skip\n"); + return MV_OK; + } + + /* + * Stage 1 - Dunit Setup + */ + +#ifdef DUNIT_STATIC + /* + * For Static D-Unit Setup use must set the correct static values + * at the ddr3_*soc*_vars.h file + */ + DEBUG_INIT_FULL_S("DDR3 Training Sequence - Static MC Init\n"); + ddr3_static_mc_init(); + +#ifdef ECC_SUPPORT + ecc = DRAM_ECC; + if (ecc) { + reg = reg_read(REG_SDRAM_CONFIG_ADDR); + reg |= (1 << REG_SDRAM_CONFIG_ECC_OFFS); + reg_write(REG_SDRAM_CONFIG_ADDR, reg); + } +#endif +#endif + +#if defined(MV88F78X60) || defined(MV88F672X) +#if defined(AUTO_DETECTION_SUPPORT) + /* + * Configurations for both static and dynamic MC setups + * + * Dynamically Set 32Bit and ECC for AXP (Relevant only for + * Marvell DB boards) + */ + if (ddr3_check_config(BUS_WIDTH_ECC_TWSI_ADDR, CONFIG_BUS_WIDTH)) { + ddr_width = 32; + DEBUG_INIT_S("DDR3 Training Sequence - DRAM bus width 32Bit\n"); + } +#endif + +#if defined(MV88F672X) + reg = reg_read(REG_SDRAM_CONFIG_ADDR); + if ((reg >> 15) & 1) + ddr_width = 32; + else + ddr_width = 16; +#endif +#endif + +#ifdef DUNIT_SPD + status = ddr3_dunit_setup(ecc, hclk_time_ps, &ddr_width); + if (MV_OK != status) { + DEBUG_INIT_S("DDR3 Training Sequence - FAILED (ddr3 Dunit Setup)\n"); + return status; + } +#endif + + /* Fix read ready phases for all SOC in reg 0x15C8 */ + reg = reg_read(REG_TRAINING_DEBUG_3_ADDR); + reg &= ~(REG_TRAINING_DEBUG_3_MASK); + reg |= 0x4; /* Phase 0 */ + reg &= ~(REG_TRAINING_DEBUG_3_MASK << REG_TRAINING_DEBUG_3_OFFS); + reg |= (0x4 << (1 * REG_TRAINING_DEBUG_3_OFFS)); /* Phase 1 */ + reg &= ~(REG_TRAINING_DEBUG_3_MASK << (3 * REG_TRAINING_DEBUG_3_OFFS)); + reg |= (0x6 << (3 * REG_TRAINING_DEBUG_3_OFFS)); /* Phase 3 */ + reg &= ~(REG_TRAINING_DEBUG_3_MASK << (4 * REG_TRAINING_DEBUG_3_OFFS)); + reg |= (0x6 << (4 * REG_TRAINING_DEBUG_3_OFFS)); + reg &= ~(REG_TRAINING_DEBUG_3_MASK << (5 * REG_TRAINING_DEBUG_3_OFFS)); + reg |= (0x6 << (5 * REG_TRAINING_DEBUG_3_OFFS)); + reg_write(REG_TRAINING_DEBUG_3_ADDR, reg); + +#if defined(MV88F672X) + /* + * AxiBrespMode[8] = Compliant, + * AxiAddrDecodeCntrl[11] = Internal, + * AxiDataBusWidth[0] = 128bit + */ + /* 0x14A8 - AXI Control Register */ + reg_write(REG_DRAM_AXI_CTRL_ADDR, 0); +#else + /* 0x14A8 - AXI Control Register */ + reg_write(REG_DRAM_AXI_CTRL_ADDR, 0x00000100); + reg_write(REG_CDI_CONFIG_ADDR, 0x00000006); + + if ((ddr_width == 64) && (reg_read(REG_DDR_IO_ADDR) & + (1 << REG_DDR_IO_CLK_RATIO_OFFS))) { + /* 0x14A8 - AXI Control Register */ + reg_write(REG_DRAM_AXI_CTRL_ADDR, 0x00000101); + reg_write(REG_CDI_CONFIG_ADDR, 0x00000007); + } +#endif + +#if !defined(MV88F67XX) + /* + * ARMADA-370 activate DLB later at the u-boot, + * Armada38x - No DLB activation at this time + */ + reg_write(DLB_BUS_OPTIMIZATION_WEIGHTS_REG, 0x18C01E); + +#if defined(MV88F78X60) + /* WA according to eratta GL-8672902*/ + if (mv_ctrl_rev_get() == MV_78XX0_B0_REV) + reg_write(DLB_BUS_OPTIMIZATION_WEIGHTS_REG, 0xc19e); +#endif + + reg_write(DLB_AGING_REGISTER, 0x0f7f007f); + reg_write(DLB_EVICTION_CONTROL_REG, 0x0); + reg_write(DLB_EVICTION_TIMERS_REGISTER_REG, 0x00FF3C1F); + + reg_write(MBUS_UNITS_PRIORITY_CONTROL_REG, 0x55555555); + reg_write(FABRIC_UNITS_PRIORITY_CONTROL_REG, 0xAA); + reg_write(MBUS_UNITS_PREFETCH_CONTROL_REG, 0xffff); + reg_write(FABRIC_UNITS_PREFETCH_CONTROL_REG, 0xf0f); + +#if defined(MV88F78X60) + /* WA according to eratta GL-8672902 */ + if (mv_ctrl_rev_get() == MV_78XX0_B0_REV) { + reg = reg_read(REG_STATIC_DRAM_DLB_CONTROL); + reg |= DLB_ENABLE; + reg_write(REG_STATIC_DRAM_DLB_CONTROL, reg); + } +#endif /* end defined(MV88F78X60) */ +#endif /* end !defined(MV88F67XX) */ + + if (ddr3_get_log_level() >= MV_LOG_LEVEL_1) + print_dunit_setup(); + + /* + * Stage 2 - Training Values Setup + */ +#ifdef STATIC_TRAINING + /* + * DRAM Init - After all the D-unit values are set, its time to init + * the D-unit + */ + /* Wait for '0' */ + reg_write(REG_SDRAM_INIT_CTRL_ADDR, 0x1); + do { + reg = (reg_read(REG_SDRAM_INIT_CTRL_ADDR)) & + (1 << REG_SDRAM_INIT_CTRL_OFFS); + } while (reg); + + /* ddr3 init using static parameters - HW training is disabled */ + DEBUG_INIT_FULL_S("DDR3 Training Sequence - Static Training Parameters\n"); + ddr3_static_training_init(); + +#if defined(MV88F78X60) + /* + * If ECC is enabled, need to scrub the U-Boot area memory region - + * Run training function with Xor bypass just to scrub the memory + */ + status = ddr3_hw_training(target_freq, ddr_width, + 1, scrub_offs, scrub_size, + dqs_clk_aligned, DDR3_TRAINING_DEBUG, + REG_DIMM_SKIP_WL); + if (MV_OK != status) { + DEBUG_INIT_FULL_S("DDR3 Training Sequence - FAILED\n"); + return status; + } +#endif +#else + /* Set X-BAR windows for the training sequence */ + ddr3_save_and_set_training_windows(win_backup); + + /* Run DDR3 Training Sequence */ + /* DRAM Init */ + reg_write(REG_SDRAM_INIT_CTRL_ADDR, 0x1); + do { + reg = (reg_read(REG_SDRAM_INIT_CTRL_ADDR)) & + (1 << REG_SDRAM_INIT_CTRL_OFFS); + } while (reg); /* Wait for '0' */ + + /* ddr3 init using DDR3 HW training procedure */ + DEBUG_INIT_FULL_S("DDR3 Training Sequence - HW Training Procedure\n"); + status = ddr3_hw_training(target_freq, ddr_width, + 0, scrub_offs, scrub_size, + dqs_clk_aligned, DDR3_TRAINING_DEBUG, + REG_DIMM_SKIP_WL); + if (MV_OK != status) { + DEBUG_INIT_FULL_S("DDR3 Training Sequence - FAILED\n"); + return status; + } +#endif + + /* + * Stage 3 - Finish + */ +#if defined(MV88F78X60) || defined(MV88F672X) + /* Disable ECC Ignore bit */ + reg = reg_read(REG_SDRAM_CONFIG_ADDR) & + ~(1 << REG_SDRAM_CONFIG_IERR_OFFS); + reg_write(REG_SDRAM_CONFIG_ADDR, reg); +#endif + +#if !defined(STATIC_TRAINING) + /* Restore and set windows */ + ddr3_restore_and_set_final_windows(win_backup); +#endif + + /* Update DRAM init indication in bootROM register */ + reg = reg_read(REG_BOOTROM_ROUTINE_ADDR); + reg_write(REG_BOOTROM_ROUTINE_ADDR, + reg | (1 << REG_BOOTROM_ROUTINE_DRAM_INIT_OFFS)); + +#if !defined(MV88F67XX) +#if defined(MV88F78X60) + if (mv_ctrl_rev_get() == MV_78XX0_B0_REV) { + reg = reg_read(REG_SDRAM_CONFIG_ADDR); + if (ecc == 0) + reg_write(REG_SDRAM_CONFIG_ADDR, reg | (1 << 19)); + } +#endif /* end defined(MV88F78X60) */ + + reg_write(DLB_EVICTION_CONTROL_REG, 0x9); + + reg = reg_read(REG_STATIC_DRAM_DLB_CONTROL); + reg |= (DLB_ENABLE | DLB_WRITE_COALESING | DLB_AXI_PREFETCH_EN | + DLB_MBUS_PREFETCH_EN | PREFETCH_NLNSZTR); + reg_write(REG_STATIC_DRAM_DLB_CONTROL, reg); +#endif /* end !defined(MV88F67XX) */ + +#ifdef STATIC_TRAINING + DEBUG_INIT_S("DDR3 Training Sequence - Ended Successfully (S)\n"); +#else + DEBUG_INIT_S("DDR3 Training Sequence - Ended Successfully\n"); +#endif + + return MV_OK; +} + +/* + * Name: ddr3_get_cpu_freq + * Desc: read S@R and return CPU frequency + * Args: + * Notes: + * Returns: required value + */ + +u32 ddr3_get_cpu_freq(void) +{ + u32 reg, cpu_freq; + +#if defined(MV88F672X) + /* Read sample at reset setting */ + reg = reg_read(REG_SAMPLE_RESET_HIGH_ADDR); /* 0xE8200 */ + cpu_freq = (reg & REG_SAMPLE_RESET_CPU_FREQ_MASK) >> + REG_SAMPLE_RESET_CPU_FREQ_OFFS; +#else + /* Read sample at reset setting */ + reg = reg_read(REG_SAMPLE_RESET_LOW_ADDR); /* 0x18230 [23:21] */ +#if defined(MV88F78X60) + cpu_freq = (reg & REG_SAMPLE_RESET_CPU_FREQ_MASK) >> + REG_SAMPLE_RESET_CPU_FREQ_OFFS; + reg = reg_read(REG_SAMPLE_RESET_HIGH_ADDR); /* 0x18234 [20] */ + cpu_freq |= (((reg >> REG_SAMPLE_RESET_HIGH_CPU_FREQ_OFFS) & 0x1) << 3); +#elif defined(MV88F67XX) + cpu_freq = (reg & REG_SAMPLE_RESET_CPU_FREQ_MASK) >> + REG_SAMPLE_RESET_CPU_FREQ_OFFS; +#endif +#endif + + return cpu_freq; +} + +/* + * Name: ddr3_get_fab_opt + * Desc: read S@R and return CPU frequency + * Args: + * Notes: + * Returns: required value + */ +u32 ddr3_get_fab_opt(void) +{ + __maybe_unused u32 reg, fab_opt; + +#if defined(MV88F672X) + return 0; /* No fabric */ +#else + /* Read sample at reset setting */ + reg = reg_read(REG_SAMPLE_RESET_LOW_ADDR); + fab_opt = (reg & REG_SAMPLE_RESET_FAB_MASK) >> + REG_SAMPLE_RESET_FAB_OFFS; + +#if defined(MV88F78X60) + reg = reg_read(REG_SAMPLE_RESET_HIGH_ADDR); + fab_opt |= (((reg >> 19) & 0x1) << 4); +#endif + + return fab_opt; +#endif +} + +/* + * Name: ddr3_get_vco_freq + * Desc: read S@R and return VCO frequency + * Args: + * Notes: + * Returns: required value + */ +u32 ddr3_get_vco_freq(void) +{ + u32 fab, cpu_freq, ui_vco_freq; + + fab = ddr3_get_fab_opt(); + cpu_freq = ddr3_get_cpu_freq(); + + if (fab == 2 || fab == 3 || fab == 7 || fab == 8 || fab == 10 || + fab == 15 || fab == 17 || fab == 20) + ui_vco_freq = cpu_freq + CLK_CPU; + else + ui_vco_freq = cpu_freq; + + return ui_vco_freq; +} + +#ifdef STATIC_TRAINING +/* + * Name: ddr3_static_training_init - Init DDR3 Training with + * static parameters + * Desc: Use this routine to init the controller without the HW training + * procedure + * User must provide compatible header file with registers data. + * Args: None. + * Notes: + * Returns: None. + */ +void ddr3_static_training_init(void) +{ + MV_DRAM_MODES *ddr_mode; + u32 reg; + int j; + + ddr_mode = ddr3_get_static_ddr_mode(); + + j = 0; + while (ddr_mode->vals[j].reg_addr != 0) { + udelay(10); /* haim want to delay each write */ + reg_write(ddr_mode->vals[j].reg_addr, + ddr_mode->vals[j].reg_value); + + if (ddr_mode->vals[j].reg_addr == + REG_PHY_REGISTRY_FILE_ACCESS_ADDR) + do { + reg = reg_read(REG_PHY_REGISTRY_FILE_ACCESS_ADDR) & + REG_PHY_REGISTRY_FILE_ACCESS_OP_DONE; + } while (reg); + j++; + } +} +#endif + +/* + * Name: ddr3_get_static_mc_value - Init Memory controller with static + * parameters + * Desc: Use this routine to init the controller without the HW training + * procedure + * User must provide compatible header file with registers data. + * Args: None. + * Notes: + * Returns: None. + */ +u32 ddr3_get_static_mc_value(u32 reg_addr, u32 offset1, u32 mask1, u32 offset2, + u32 mask2) +{ + u32 reg, tmp; + + reg = reg_read(reg_addr); + + tmp = (reg >> offset1) & mask1; + if (mask2) + tmp |= (reg >> offset2) & mask2; + + return tmp; +} + +/* + * Name: ddr3_get_static_ddr_mode - Init Memory controller with static + * parameters + * Desc: Use this routine to init the controller without the HW training + * procedure + * User must provide compatible header file with registers data. + * Args: None. + * Notes: + * Returns: None. + */ +__weak MV_DRAM_MODES *ddr3_get_static_ddr_mode(void) +{ + u32 chip_board_rev, i; + u32 size; + + /* Do not modify this code. relevant only for marvell Boards */ +#if defined(DB_78X60_PCAC) + chip_board_rev = Z1_PCAC; +#elif defined(DB_78X60_AMC) + chip_board_rev = A0_AMC; +#elif defined(DB_88F6710_PCAC) + chip_board_rev = A0_PCAC; +#elif defined(RD_88F6710) + chip_board_rev = A0_RD; +#elif defined(MV88F672X) + chip_board_rev = mv_board_id_get(); +#else + chip_board_rev = A0; +#endif + + size = sizeof(ddr_modes) / sizeof(MV_DRAM_MODES); + for (i = 0; i < size; i++) { + if ((ddr3_get_cpu_freq() == ddr_modes[i].cpu_freq) && + (ddr3_get_fab_opt() == ddr_modes[i].fab_freq) && + (chip_board_rev == ddr_modes[i].chip_board_rev)) + return &ddr_modes[i]; + } + + return &ddr_modes[0]; +} + +#ifdef DUNIT_STATIC +/* + * Name: ddr3_static_mc_init - Init Memory controller with static parameters + * Desc: Use this routine to init the controller without the HW training + * procedure + * User must provide compatible header file with registers data. + * Args: None. + * Notes: + * Returns: None. + */ +void ddr3_static_mc_init(void) +{ + MV_DRAM_MODES *ddr_mode; + u32 reg; + int j; + + ddr_mode = ddr3_get_static_ddr_mode(); + j = 0; + while (ddr_mode->regs[j].reg_addr != 0) { + reg_write(ddr_mode->regs[j].reg_addr, + ddr_mode->regs[j].reg_value); + if (ddr_mode->regs[j].reg_addr == + REG_PHY_REGISTRY_FILE_ACCESS_ADDR) + do { + reg = reg_read(REG_PHY_REGISTRY_FILE_ACCESS_ADDR) & + REG_PHY_REGISTRY_FILE_ACCESS_OP_DONE; + } while (reg); + j++; + } +} +#endif + +/* + * Name: ddr3_check_config - Check user configurations: ECC/MultiCS + * Desc: + * Args: twsi Address + * Notes: Only Available for ArmadaXP/Armada 370 DB boards + * Returns: None. + */ +int ddr3_check_config(u32 twsi_addr, MV_CONFIG_TYPE config_type) +{ +#ifdef AUTO_DETECTION_SUPPORT + u8 data = 0; + int ret; + int offset; + + if ((config_type == CONFIG_ECC) || (config_type == CONFIG_BUS_WIDTH)) + offset = 1; + else + offset = 0; + + ret = i2c_read(twsi_addr, offset, 1, (u8 *)&data, 1); + if (!ret) { + switch (config_type) { + case CONFIG_ECC: + if (data & 0x2) + return 1; + break; + case CONFIG_BUS_WIDTH: + if (data & 0x1) + return 1; + break; +#ifdef DB_88F6710 + case CONFIG_MULTI_CS: + if (CFG_MULTI_CS_MODE(data)) + return 1; + break; +#else + case CONFIG_MULTI_CS: + break; +#endif + } + } +#endif + + return 0; +} + +#if defined(DB_88F78X60_REV2) +/* + * Name: ddr3_get_eprom_fabric - Get Fabric configuration from EPROM + * Desc: + * Args: twsi Address + * Notes: Only Available for ArmadaXP DB Rev2 boards + * Returns: None. + */ +u8 ddr3_get_eprom_fabric(void) +{ +#ifdef AUTO_DETECTION_SUPPORT + u8 data = 0; + int ret; + + ret = i2c_read(NEW_FABRIC_TWSI_ADDR, 1, 1, (u8 *)&data, 1); + if (!ret) + return data & 0x1F; +#endif + + return 0; +} + +#endif + +/* + * Name: ddr3_cl_to_valid_cl - this return register matching CL value + * Desc: + * Args: clValue - the value + + * Notes: + * Returns: required CL value + */ +u32 ddr3_cl_to_valid_cl(u32 cl) +{ + switch (cl) { + case 5: + return 2; + break; + case 6: + return 4; + break; + case 7: + return 6; + break; + case 8: + return 8; + break; + case 9: + return 10; + break; + case 10: + return 12; + break; + case 11: + return 14; + break; + case 12: + return 1; + break; + case 13: + return 3; + break; + case 14: + return 5; + break; + default: + return 2; + } +} + +/* + * Name: ddr3_cl_to_valid_cl - this return register matching CL value + * Desc: + * Args: clValue - the value + * Notes: + * Returns: required CL value + */ +u32 ddr3_valid_cl_to_cl(u32 ui_valid_cl) +{ + switch (ui_valid_cl) { + case 1: + return 12; + break; + case 2: + return 5; + break; + case 3: + return 13; + break; + case 4: + return 6; + break; + case 5: + return 14; + break; + case 6: + return 7; + break; + case 8: + return 8; + break; + case 10: + return 9; + break; + case 12: + return 10; + break; + case 14: + return 11; + break; + default: + return 0; + } +} + +/* + * Name: ddr3_get_cs_num_from_reg + * Desc: + * Args: + * Notes: + * Returns: + */ +u32 ddr3_get_cs_num_from_reg(void) +{ + u32 cs_ena = ddr3_get_cs_ena_from_reg(); + u32 cs_count = 0; + u32 cs; + + for (cs = 0; cs < MAX_CS; cs++) { + if (cs_ena & (1 << cs)) + cs_count++; + } + + return cs_count; +} + +/* + * Name: ddr3_get_cs_ena_from_reg + * Desc: + * Args: + * Notes: + * Returns: + */ +u32 ddr3_get_cs_ena_from_reg(void) +{ + return reg_read(REG_DDR3_RANK_CTRL_ADDR) & + REG_DDR3_RANK_CTRL_CS_ENA_MASK; +} + +/* + * mv_ctrl_rev_get - Get Marvell controller device revision number + * + * DESCRIPTION: + * This function returns 8bit describing the device revision as defined + * in PCI Express Class Code and Revision ID Register. + * + * INPUT: + * None. + * + * OUTPUT: + * None. + * + * RETURN: + * 8bit desscribing Marvell controller revision number + * + */ +#if !defined(MV88F672X) +u8 mv_ctrl_rev_get(void) +{ + u8 rev_num; + +#if defined(MV_INCLUDE_CLK_PWR_CNTRL) + /* Check pex power state */ + u32 pex_power; + pex_power = mv_ctrl_pwr_clck_get(PEX_UNIT_ID, 0); + if (pex_power == 0) + mv_ctrl_pwr_clck_set(PEX_UNIT_ID, 0, 1); +#endif + rev_num = (u8)reg_read(PEX_CFG_DIRECT_ACCESS(0, + PCI_CLASS_CODE_AND_REVISION_ID)); + +#if defined(MV_INCLUDE_CLK_PWR_CNTRL) + /* Return to power off state */ + if (pex_power == 0) + mv_ctrl_pwr_clck_set(PEX_UNIT_ID, 0, 0); +#endif + + return (rev_num & PCCRIR_REVID_MASK) >> PCCRIR_REVID_OFFS; +} + +#endif + +#if defined(MV88F672X) +void get_target_freq(u32 freq_mode, u32 *ddr_freq, u32 *hclk_ps) +{ + u32 tmp, hclk; + + switch (freq_mode) { + case CPU_333MHz_DDR_167MHz_L2_167MHz: + hclk = 84; + tmp = DDR_100; + break; + case CPU_266MHz_DDR_266MHz_L2_133MHz: + case CPU_333MHz_DDR_222MHz_L2_167MHz: + case CPU_400MHz_DDR_200MHz_L2_200MHz: + case CPU_400MHz_DDR_267MHz_L2_200MHz: + case CPU_533MHz_DDR_267MHz_L2_267MHz: + case CPU_500MHz_DDR_250MHz_L2_250MHz: + case CPU_600MHz_DDR_300MHz_L2_300MHz: + case CPU_800MHz_DDR_267MHz_L2_400MHz: + case CPU_900MHz_DDR_300MHz_L2_450MHz: + tmp = DDR_300; + hclk = 150; + break; + case CPU_333MHz_DDR_333MHz_L2_167MHz: + case CPU_500MHz_DDR_334MHz_L2_250MHz: + case CPU_666MHz_DDR_333MHz_L2_333MHz: + tmp = DDR_333; + hclk = 165; + break; + case CPU_533MHz_DDR_356MHz_L2_267MHz: + tmp = DDR_360; + hclk = 180; + break; + case CPU_400MHz_DDR_400MHz_L2_200MHz: + case CPU_600MHz_DDR_400MHz_L2_300MHz: + case CPU_800MHz_DDR_400MHz_L2_400MHz: + case CPU_400MHz_DDR_400MHz_L2_400MHz: + tmp = DDR_400; + hclk = 200; + break; + case CPU_666MHz_DDR_444MHz_L2_333MHz: + case CPU_900MHz_DDR_450MHz_L2_450MHz: + tmp = DDR_444; + hclk = 222; + break; + case CPU_500MHz_DDR_500MHz_L2_250MHz: + case CPU_1000MHz_DDR_500MHz_L2_500MHz: + case CPU_1000MHz_DDR_500MHz_L2_333MHz: + tmp = DDR_500; + hclk = 250; + break; + case CPU_533MHz_DDR_533MHz_L2_267MHz: + case CPU_800MHz_DDR_534MHz_L2_400MHz: + case CPU_1100MHz_DDR_550MHz_L2_550MHz: + tmp = DDR_533; + hclk = 267; + break; + case CPU_600MHz_DDR_600MHz_L2_300MHz: + case CPU_900MHz_DDR_600MHz_L2_450MHz: + case CPU_1200MHz_DDR_600MHz_L2_600MHz: + tmp = DDR_600; + hclk = 300; + break; + case CPU_666MHz_DDR_666MHz_L2_333MHz: + case CPU_1000MHz_DDR_667MHz_L2_500MHz: + tmp = DDR_666; + hclk = 333; + break; + default: + *ddr_freq = 0; + *hclk_ps = 0; + break; + } + + *ddr_freq = tmp; /* DDR freq define */ + *hclk_ps = 1000000 / hclk; /* values are 1/HCLK in ps */ + + return; +} +#endif |