diff options
Diffstat (limited to 'drivers/fpga/fpga.c')
| -rw-r--r-- | drivers/fpga/fpga.c | 335 |
1 files changed, 335 insertions, 0 deletions
diff --git a/drivers/fpga/fpga.c b/drivers/fpga/fpga.c new file mode 100644 index 0000000000..67a6c300c7 --- /dev/null +++ b/drivers/fpga/fpga.c @@ -0,0 +1,335 @@ +/* + * (C) Copyright 2002 + * Rich Ireland, Enterasys Networks, rireland@enterasys.com. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +/* + * Generic FPGA support + */ +#include <common.h> /* core U-Boot definitions */ +#include <xilinx.h> /* xilinx specific definitions */ +#include <altera.h> /* altera specific definitions */ + +#if 0 +#define FPGA_DEBUG /* define FPGA_DEBUG to get debug messages */ +#endif + +/* Local definitions */ +#ifndef CONFIG_MAX_FPGA_DEVICES +#define CONFIG_MAX_FPGA_DEVICES 5 +#endif + +/* Enable/Disable debug console messages */ +#ifdef FPGA_DEBUG +#define PRINTF(fmt,args...) printf (fmt ,##args) +#else +#define PRINTF(fmt,args...) +#endif + +/* Local static data */ +static ulong relocation_offset = 0; +static int next_desc = FPGA_INVALID_DEVICE; +static fpga_desc desc_table[CONFIG_MAX_FPGA_DEVICES]; + +/* Local static functions */ +static __attribute__((__const__)) fpga_desc * __attribute__((__const__)) fpga_get_desc( int devnum ); +static __attribute__((__const__)) fpga_desc * __attribute__((__const__)) fpga_validate( int devnum, void *buf, + size_t bsize, char *fn ); +static int fpga_dev_info( int devnum ); + + +/* ------------------------------------------------------------------------- */ + +/* fpga_no_sup + * 'no support' message function + */ +static void fpga_no_sup( char *fn, char *msg ) +{ + if ( fn && msg ) { + printf( "%s: No support for %s.\n", fn, msg); + } else if ( msg ) { + printf( "No support for %s.\n", msg); + } else { + printf( "No FPGA suport!\n"); + } +} + + +/* fpga_get_desc + * map a device number to a descriptor + */ +static __attribute__((__const__)) fpga_desc * __attribute__((__const__)) fpga_get_desc( int devnum ) +{ + fpga_desc *desc = (fpga_desc * )NULL; + + if (( devnum >= 0 ) && (devnum < next_desc )) { + desc = &desc_table[devnum]; + PRINTF( "%s: found fpga descriptor #%d @ 0x%p\n", + __FUNCTION__, devnum, desc ); + } + + return desc; +} + + +/* fpga_validate + * generic parameter checking code + */ +static __attribute__((__const__)) fpga_desc * __attribute__((__const__)) fpga_validate( int devnum, void *buf, + size_t bsize, char *fn ) +{ + fpga_desc * desc = fpga_get_desc( devnum ); + + if ( !desc ) { + printf( "%s: Invalid device number %d\n", fn, devnum ); + } + + if ( !buf ) { + printf( "%s: Null buffer.\n", fn ); + return (fpga_desc * const)NULL; + } + return desc; +} + + +/* fpga_dev_info + * generic multiplexing code + */ +static int fpga_dev_info( int devnum ) +{ + int ret_val = FPGA_FAIL; /* assume failure */ + const fpga_desc * const desc = fpga_get_desc( devnum ); + + if ( desc ) { + PRINTF( "%s: Device Descriptor @ 0x%p\n", + __FUNCTION__, desc->devdesc ); + + switch ( desc->devtype ) { + case fpga_xilinx: +#if defined(CONFIG_FPGA_XILINX) + printf( "Xilinx Device\nDescriptor @ 0x%p\n", desc ); + ret_val = xilinx_info( desc->devdesc ); +#else + fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" ); +#endif + break; + case fpga_altera: +#if defined(CONFIG_FPGA_ALTERA) + printf( "Altera Device\nDescriptor @ 0x%p\n", desc ); + ret_val = altera_info( desc->devdesc ); +#else + fpga_no_sup( (char *)__FUNCTION__, "Altera devices" ); +#endif + break; + default: + printf( "%s: Invalid or unsupported device type %d\n", + __FUNCTION__, desc->devtype ); + } + } else { + printf( "%s: Invalid device number %d\n", + __FUNCTION__, devnum ); + } + + return ret_val; +} + + +/* fpga_reloc + * generic multiplexing code + */ +int fpga_reloc( fpga_type devtype, void *desc, ulong reloc_off ) +{ + int ret_val = FPGA_FAIL; + + PRINTF( "%s: Relocating Device of type %d @ 0x%p with offset %lx\n", + __FUNCTION__, devtype, desc, reloc_off ); + + switch ( devtype ) { + case fpga_xilinx: +#if defined(CONFIG_FPGA_XILINX) + ret_val = xilinx_reloc( desc, reloc_off ); +#else + fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" ); +#endif + break; + case fpga_altera: +#if defined(CONFIG_FPGA_ALTERA) + ret_val = altera_reloc( desc, reloc_off ); +#else + fpga_no_sup( (char *)__FUNCTION__, "Altera devices" ); +#endif + break; + default: + printf( "%s: Invalid or unsupported device type %d\n", + __FUNCTION__, devtype ); + } + + return ret_val; +} + +/* ------------------------------------------------------------------------- */ +/* fgpa_init is usually called from misc_init_r() and MUST be called + * before any of the other fpga functions are used. + */ +void fpga_init( ulong reloc_off ) +{ + relocation_offset = reloc_off; + next_desc = 0; + memset( desc_table, 0, sizeof(desc_table)); + + PRINTF( "%s: CONFIG_FPGA = 0x%x\n", __FUNCTION__, CONFIG_FPGA ); +} + +/* fpga_count + * Basic interface function to get the current number of devices available. + */ +int fpga_count( void ) +{ + return next_desc; +} + +/* fpga_add + * Attempts to relocate the device/board specific interface code + * to the proper RAM locations and adds the device descriptor to + * the device table. + */ +int fpga_add( fpga_type devtype, void *desc ) +{ + int devnum = FPGA_INVALID_DEVICE; + + if ( next_desc < 0 ) { + printf( "%s: FPGA support not initialized!\n", __FUNCTION__ ); + } else if (( devtype > fpga_min_type ) && ( devtype < fpga_undefined )) { + if ( desc ) { + if ( next_desc < CONFIG_MAX_FPGA_DEVICES ) { + if ( fpga_reloc( devtype, desc, relocation_offset ) + == FPGA_SUCCESS ) { + devnum = next_desc; + desc_table[next_desc].devtype = devtype; + desc_table[next_desc++].devdesc = desc; + } else { + printf( "%s: Unable to relocate device interface table!\n", + __FUNCTION__ ); + } + } else { + printf( "%s: Exceeded Max FPGA device count\n", __FUNCTION__ ); + } + } else { + printf( "%s: NULL device descriptor\n", __FUNCTION__ ); + } + } else { + printf( "%s: Unsupported FPGA type %d\n", __FUNCTION__, devtype ); + } + + return devnum; +} + +/* + * Generic multiplexing code + */ +int fpga_load( int devnum, void *buf, size_t bsize ) +{ + int ret_val = FPGA_FAIL; /* assume failure */ + fpga_desc * desc = fpga_validate( devnum, buf, bsize, (char *)__FUNCTION__ ); + + if ( desc ) { + switch ( desc->devtype ) { + case fpga_xilinx: +#if defined(CONFIG_FPGA_XILINX) + ret_val = xilinx_load( desc->devdesc, buf, bsize ); +#else + fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" ); +#endif + break; + case fpga_altera: +#if defined(CONFIG_FPGA_ALTERA) + ret_val = altera_load( desc->devdesc, buf, bsize ); +#else + fpga_no_sup( (char *)__FUNCTION__, "Altera devices" ); +#endif + break; + default: + printf( "%s: Invalid or unsupported device type %d\n", + __FUNCTION__, desc->devtype ); + } + } + + return ret_val; +} + +/* fpga_dump + * generic multiplexing code + */ +int fpga_dump( int devnum, void *buf, size_t bsize ) +{ + int ret_val = FPGA_FAIL; /* assume failure */ + fpga_desc * desc = fpga_validate( devnum, buf, bsize, (char *)__FUNCTION__ ); + + if ( desc ) { + switch ( desc->devtype ) { + case fpga_xilinx: +#if defined(CONFIG_FPGA_XILINX) + ret_val = xilinx_dump( desc->devdesc, buf, bsize ); +#else + fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" ); +#endif + break; + case fpga_altera: +#if defined(CONFIG_FPGA_ALTERA) + ret_val = altera_dump( desc->devdesc, buf, bsize ); +#else + fpga_no_sup( (char *)__FUNCTION__, "Altera devices" ); +#endif + break; + default: + printf( "%s: Invalid or unsupported device type %d\n", + __FUNCTION__, desc->devtype ); + } + } + + return ret_val; +} + + +/* fpga_info + * front end to fpga_dev_info. If devnum is invalid, report on all + * available devices. + */ +int fpga_info( int devnum ) +{ + if ( devnum == FPGA_INVALID_DEVICE ) { + if ( next_desc > 0 ) { + int dev; + + for ( dev = 0; dev < next_desc; dev++ ) { + fpga_dev_info( dev ); + } + return FPGA_SUCCESS; + } else { + printf( "%s: No FPGA devices available.\n", __FUNCTION__ ); + return FPGA_FAIL; + } + } + else return fpga_dev_info( devnum ); +} + +/* ------------------------------------------------------------------------- */ |