diff options
Diffstat (limited to 'drivers/mmc/fsl_esdhc_imx.c')
| -rw-r--r-- | drivers/mmc/fsl_esdhc_imx.c | 22 |
1 files changed, 12 insertions, 10 deletions
diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c index f42e018434..5b61eeb214 100644 --- a/drivers/mmc/fsl_esdhc_imx.c +++ b/drivers/mmc/fsl_esdhc_imx.c @@ -907,19 +907,9 @@ static int fsl_esdhc_execute_tuning(struct udevice *dev, uint32_t opcode) ctrl = readl(®s->autoc12err); if ((!(ctrl & MIX_CTRL_EXE_TUNE)) && (ctrl & MIX_CTRL_SMPCLK_SEL)) { - /* - * need to wait some time, make sure sd/mmc fininsh - * send out tuning data, otherwise, the sd/mmc can't - * response to any command when the card still out - * put the tuning data. - */ - mdelay(1); ret = 0; break; } - - /* Add 1ms delay for SD and eMMC */ - mdelay(1); } writel(irqstaten, ®s->irqstaten); @@ -1267,6 +1257,18 @@ static int fsl_esdhc_init(struct fsl_esdhc_priv *priv, val |= priv->tuning_start_tap; val &= ~ESDHC_TUNING_STEP_MASK; val |= (priv->tuning_step) << ESDHC_TUNING_STEP_SHIFT; + + /* Disable the CMD CRC check for tuning, if not, need to + * add some delay after every tuning command, because + * hardware standard tuning logic will directly go to next + * step once it detect the CMD CRC error, will not wait for + * the card side to finally send out the tuning data, trigger + * the buffer read ready interrupt immediately. If usdhc send + * the next tuning command some eMMC card will stuck, can't + * response, block the tuning procedure or the first command + * after the whole tuning procedure always can't get any response. + */ + val |= ESDHC_TUNING_CMD_CRC_CHECK_DISABLE; writel(val, ®s->tuning_ctrl); } } |