diff options
Diffstat (limited to 'drivers/mmc/gen_atmel_mci.c')
-rw-r--r-- | drivers/mmc/gen_atmel_mci.c | 42 |
1 files changed, 20 insertions, 22 deletions
diff --git a/drivers/mmc/gen_atmel_mci.c b/drivers/mmc/gen_atmel_mci.c index 22154d13d7..1c108b5470 100644 --- a/drivers/mmc/gen_atmel_mci.c +++ b/drivers/mmc/gen_atmel_mci.c @@ -74,6 +74,20 @@ static void dump_cmd(u32 cmdr, u32 arg, u32 status, const char* msg) cmdr, cmdr & 0x3F, arg, status, msg); } +static inline void mci_set_blklen(atmel_mci_t *mci, int blklen) +{ + unsigned int version = atmel_mci_get_version(mci); + + blklen &= 0xfffc; + + /* MCI IP version >= 0x200 has blkr */ + if (version >= 0x200) + writel(MMCI_BFINS(BLKLEN, blklen, readl(&mci->blkr)), + &mci->blkr); + else + writel(MMCI_BFINS(BLKLEN, blklen, readl(&mci->mr)), &mci->mr); +} + /* Setup for MCI Clock and Block Size */ #ifdef CONFIG_DM_MMC static void mci_set_mode(struct udevice *dev, u32 hz, u32 blklen) @@ -124,7 +138,6 @@ static void mci_set_mode(struct mmc *mmc, u32 hz, u32 blklen) priv->curr_clk = bus_hz / (clkdiv * 2 + clkodd + 2); else priv->curr_clk = (bus_hz / (clkdiv + 1)) / 2; - blklen &= 0xfffc; mr = MMCI_BF(CLKDIV, clkdiv); @@ -138,14 +151,10 @@ static void mci_set_mode(struct mmc *mmc, u32 hz, u32 blklen) */ if (version >= 0x500) mr |= MMCI_BF(CLKODD, clkodd); - else - mr |= MMCI_BF(BLKLEN, blklen); writel(mr, &mci->mr); - /* MCI IP version >= 0x200 has blkr */ - if (version >= 0x200) - writel(MMCI_BF(BLKLEN, blklen), &mci->blkr); + mci_set_blklen(mci, blklen); if (mmc->card_caps & mmc->cfg->host_caps & MMC_MODE_HS) writel(MMCI_BIT(HSMODE), &mci->cfg); @@ -236,7 +245,6 @@ static int atmel_mci_send_cmd(struct udevice *dev, struct mmc_cmd *cmd, { struct atmel_mci_plat *plat = dev_get_platdata(dev); struct atmel_mci_priv *priv = dev_get_priv(dev); - struct mmc *mmc = mmc_get_mmc_dev(dev); atmel_mci_t *mci = plat->mci; #else static int @@ -257,11 +265,13 @@ mci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) /* Figure out the transfer arguments */ cmdr = mci_encode_cmd(cmd, data, &error_flags); + mci_set_blklen(mci, data->blocksize); + /* For multi blocks read/write, set the block register */ if ((cmd->cmdidx == MMC_CMD_READ_MULTIPLE_BLOCK) || (cmd->cmdidx == MMC_CMD_WRITE_MULTIPLE_BLOCK)) - writel(data->blocks | MMCI_BF(BLKLEN, mmc->read_bl_len), - &mci->blkr); + writel(data->blocks | MMCI_BF(BLKLEN, data->blocksize), + &mci->blkr); /* Send the command */ writel(cmd->cmdarg, &mci->argr); @@ -295,17 +305,15 @@ mci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) if (data) { u32 word_count, block_count; u32* ioptr; - u32 sys_blocksize, dummy, i; + u32 i; u32 (*mci_data_op) (atmel_mci_t *mci, u32* data, u32 error_flags); if (data->flags & MMC_DATA_READ) { mci_data_op = mci_data_read; - sys_blocksize = mmc->read_bl_len; ioptr = (u32*)data->dest; } else { mci_data_op = mci_data_write; - sys_blocksize = mmc->write_bl_len; ioptr = (u32*)data->src; } @@ -328,16 +336,6 @@ mci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) 1, cnt, 0); } #endif -#ifdef DEBUG - if (!status && word_count < (sys_blocksize / 4)) - printf("filling rest of block...\n"); -#endif - /* fill the rest of a full block */ - while (!status && word_count < (sys_blocksize / 4)) { - status = mci_data_op(mci, &dummy, - error_flags); - word_count++; - } if (status) { dump_cmd(cmdr, cmd->cmdarg, status, "Data Transfer Failed"); |