summaryrefslogtreecommitdiff
path: root/drivers/net/fm/memac_phy.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/fm/memac_phy.c')
-rw-r--r--drivers/net/fm/memac_phy.c62
1 files changed, 41 insertions, 21 deletions
diff --git a/drivers/net/fm/memac_phy.c b/drivers/net/fm/memac_phy.c
index a155d8930b..4ab78e6c25 100644
--- a/drivers/net/fm/memac_phy.c
+++ b/drivers/net/fm/memac_phy.c
@@ -10,9 +10,28 @@
#include <miiphy.h>
#include <phy.h>
#include <asm/io.h>
-#include <asm/fsl_memac.h>
+#include <fsl_memac.h>
#include <fm_eth.h>
+#ifdef CONFIG_SYS_MEMAC_LITTLE_ENDIAN
+#define memac_out_32(a, v) out_le32(a, v)
+#define memac_clrbits_32(a, v) clrbits_le32(a, v)
+#define memac_setbits_32(a, v) setbits_le32(a, v)
+#else
+#define memac_out_32(a, v) out_be32(a, v)
+#define memac_clrbits_32(a, v) clrbits_be32(a, v)
+#define memac_setbits_32(a, v) setbits_be32(a, v)
+#endif
+
+static u32 memac_in_32(u32 *reg)
+{
+#ifdef CONFIG_SYS_MEMAC_LITTLE_ENDIAN
+ return in_le32(reg);
+#else
+ return in_be32(reg);
+#endif
+}
+
/*
* Write value to the PHY for this device to the register at regnum, waiting
* until the write is done before it returns. All PHY configuration has to be
@@ -28,31 +47,31 @@ int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
if (dev_addr == MDIO_DEVAD_NONE) {
c45 = 0; /* clause 22 */
dev_addr = regnum & 0x1f;
- clrbits_be32(&regs->mdio_stat, MDIO_STAT_ENC);
+ memac_clrbits_32(&regs->mdio_stat, MDIO_STAT_ENC);
} else
- setbits_be32(&regs->mdio_stat, MDIO_STAT_ENC);
+ memac_setbits_32(&regs->mdio_stat, MDIO_STAT_ENC);
/* Wait till the bus is free */
- while ((in_be32(&regs->mdio_stat)) & MDIO_STAT_BSY)
+ while ((memac_in_32(&regs->mdio_stat)) & MDIO_STAT_BSY)
;
/* Set the port and dev addr */
mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr);
- out_be32(&regs->mdio_ctl, mdio_ctl);
+ memac_out_32(&regs->mdio_ctl, mdio_ctl);
/* Set the register address */
if (c45)
- out_be32(&regs->mdio_addr, regnum & 0xffff);
+ memac_out_32(&regs->mdio_addr, regnum & 0xffff);
/* Wait till the bus is free */
- while ((in_be32(&regs->mdio_stat)) & MDIO_STAT_BSY)
+ while ((memac_in_32(&regs->mdio_stat)) & MDIO_STAT_BSY)
;
/* Write the value to the register */
- out_be32(&regs->mdio_data, MDIO_DATA(value));
+ memac_out_32(&regs->mdio_data, MDIO_DATA(value));
/* Wait till the MDIO write is complete */
- while ((in_be32(&regs->mdio_data)) & MDIO_DATA_BSY)
+ while ((memac_in_32(&regs->mdio_data)) & MDIO_DATA_BSY)
;
return 0;
@@ -75,39 +94,39 @@ int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr,
return 0xffff;
c45 = 0; /* clause 22 */
dev_addr = regnum & 0x1f;
- clrbits_be32(&regs->mdio_stat, MDIO_STAT_ENC);
+ memac_clrbits_32(&regs->mdio_stat, MDIO_STAT_ENC);
} else
- setbits_be32(&regs->mdio_stat, MDIO_STAT_ENC);
+ memac_setbits_32(&regs->mdio_stat, MDIO_STAT_ENC);
/* Wait till the bus is free */
- while ((in_be32(&regs->mdio_stat)) & MDIO_STAT_BSY)
+ while ((memac_in_32(&regs->mdio_stat)) & MDIO_STAT_BSY)
;
/* Set the Port and Device Addrs */
mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr);
- out_be32(&regs->mdio_ctl, mdio_ctl);
+ memac_out_32(&regs->mdio_ctl, mdio_ctl);
/* Set the register address */
if (c45)
- out_be32(&regs->mdio_addr, regnum & 0xffff);
+ memac_out_32(&regs->mdio_addr, regnum & 0xffff);
/* Wait till the bus is free */
- while ((in_be32(&regs->mdio_stat)) & MDIO_STAT_BSY)
+ while ((memac_in_32(&regs->mdio_stat)) & MDIO_STAT_BSY)
;
/* Initiate the read */
mdio_ctl |= MDIO_CTL_READ;
- out_be32(&regs->mdio_ctl, mdio_ctl);
+ memac_out_32(&regs->mdio_ctl, mdio_ctl);
/* Wait till the MDIO write is complete */
- while ((in_be32(&regs->mdio_data)) & MDIO_DATA_BSY)
+ while ((memac_in_32(&regs->mdio_data)) & MDIO_DATA_BSY)
;
/* Return all Fs if nothing was there */
- if (in_be32(&regs->mdio_stat) & MDIO_STAT_RD_ER)
+ if (memac_in_32(&regs->mdio_stat) & MDIO_STAT_RD_ER)
return 0xffff;
- return in_be32(&regs->mdio_data) & 0xffff;
+ return memac_in_32(&regs->mdio_data) & 0xffff;
}
int memac_mdio_reset(struct mii_dev *bus)
@@ -143,8 +162,9 @@ int fm_memac_mdio_init(bd_t *bis, struct memac_mdio_info *info)
* like T2080QDS, this bit default is '0', which leads to MDIO failure
* on XAUI PHY, so set this bit definitely.
*/
- setbits_be32(&((struct memac_mdio_controller *)info->regs)->mdio_stat,
- MDIO_STAT_CLKDIV(258) | MDIO_STAT_NEG);
+ memac_setbits_32(
+ &((struct memac_mdio_controller *)info->regs)->mdio_stat,
+ MDIO_STAT_CLKDIV(258) | MDIO_STAT_NEG);
return mdio_register(bus);
}