diff options
Diffstat (limited to 'drivers/net/sk98lin/h')
23 files changed, 10884 insertions, 0 deletions
diff --git a/drivers/net/sk98lin/h/lm80.h b/drivers/net/sk98lin/h/lm80.h new file mode 100644 index 0000000000..981a4cab02 --- /dev/null +++ b/drivers/net/sk98lin/h/lm80.h @@ -0,0 +1,197 @@ +/****************************************************************************** + * + * Name: lm80.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.4 $ + * Date: $Date: 2002/04/25 11:04:10 $ + * Purpose: Contains all defines for the LM80 Chip + * (National Semiconductor). + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * History: + * $Log: lm80.h,v $ + * Revision 1.4 2002/04/25 11:04:10 rschmidt + * Editorial changes + * + * Revision 1.3 1999/11/22 13:41:19 cgoos + * Changed license header to GPL. + * + * Revision 1.2 1999/03/12 13:26:51 malthoff + * remove __STDC__. + * + * Revision 1.1 1998/06/19 09:28:31 malthoff + * created. + * + * + ******************************************************************************/ + +#ifndef __INC_LM80_H +#define __INC_LM80_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* defines ********************************************************************/ + +/* + * LM80 register definition + * + * All registers are 8 bit wide + */ +#define LM80_CFG 0x00 /* Configuration Register */ +#define LM80_ISRC_1 0x01 /* Interrupt Status Register 1 */ +#define LM80_ISRC_2 0x02 /* Interrupt Status Register 2 */ +#define LM80_IMSK_1 0x03 /* Interrupt Mask Register 1 */ +#define LM80_IMSK_2 0x04 /* Interrupt Mask Register 2 */ +#define LM80_FAN_CTRL 0x05 /* Fan Devisor/RST#/OS# Register */ +#define LM80_TEMP_CTRL 0x06 /* OS# Config, Temp Res. Reg */ + /* 0x07 - 0x1f reserved */ + /* current values */ +#define LM80_VT0_IN 0x20 /* current Voltage 0 value */ +#define LM80_VT1_IN 0x21 /* current Voltage 1 value */ +#define LM80_VT2_IN 0x22 /* current Voltage 2 value */ +#define LM80_VT3_IN 0x23 /* current Voltage 3 value */ +#define LM80_VT4_IN 0x24 /* current Voltage 4 value */ +#define LM80_VT5_IN 0x25 /* current Voltage 5 value */ +#define LM80_VT6_IN 0x26 /* current Voltage 6 value */ +#define LM80_TEMP_IN 0x27 /* current Temperature value */ +#define LM80_FAN1_IN 0x28 /* current Fan 1 count */ +#define LM80_FAN2_IN 0x29 /* current Fan 2 count */ + /* limit values */ +#define LM80_VT0_HIGH_LIM 0x2a /* high limit val for Voltage 0 */ +#define LM80_VT0_LOW_LIM 0x2b /* low limit val for Voltage 0 */ +#define LM80_VT1_HIGH_LIM 0x2c /* high limit val for Voltage 1 */ +#define LM80_VT1_LOW_LIM 0x2d /* low limit val for Voltage 1 */ +#define LM80_VT2_HIGH_LIM 0x2e /* high limit val for Voltage 2 */ +#define LM80_VT2_LOW_LIM 0x2f /* low limit val for Voltage 2 */ +#define LM80_VT3_HIGH_LIM 0x30 /* high limit val for Voltage 3 */ +#define LM80_VT3_LOW_LIM 0x31 /* low limit val for Voltage 3 */ +#define LM80_VT4_HIGH_LIM 0x32 /* high limit val for Voltage 4 */ +#define LM80_VT4_LOW_LIM 0x33 /* low limit val for Voltage 4 */ +#define LM80_VT5_HIGH_LIM 0x34 /* high limit val for Voltage 5 */ +#define LM80_VT5_LOW_LIM 0x35 /* low limit val for Voltage 5 */ +#define LM80_VT6_HIGH_LIM 0x36 /* high limit val for Voltage 6 */ +#define LM80_VT6_LOW_LIM 0x37 /* low limit val for Voltage 6 */ +#define LM80_THOT_LIM_UP 0x38 /* hot temperature limit (high) */ +#define LM80_THOT_LIM_LO 0x39 /* hot temperature limit (low) */ +#define LM80_TOS_LIM_UP 0x3a /* OS temperature limit (high) */ +#define LM80_TOS_LIM_LO 0x3b /* OS temperature limit (low) */ +#define LM80_FAN1_COUNT_LIM 0x3c /* Fan 1 count limit (high) */ +#define LM80_FAN2_COUNT_LIM 0x3d /* Fan 2 count limit (low) */ + /* 0x3e - 0x3f reserved */ + +/* + * LM80 bit definitions + */ + +/* LM80_CFG Configuration Register */ +#define LM80_CFG_START (1<<0) /* start monitoring operation */ +#define LM80_CFG_INT_ENA (1<<1) /* enables the INT# Interrupt output */ +#define LM80_CFG_INT_POL (1<<2) /* INT# pol: 0 act low, 1 act high */ +#define LM80_CFG_INT_CLR (1<<3) /* disables INT#/RST_OUT#/OS# outputs */ +#define LM80_CFG_RESET (1<<4) /* signals a reset */ +#define LM80_CFG_CHASS_CLR (1<<5) /* clears Chassis Intrusion (CI) pin */ +#define LM80_CFG_GPO (1<<6) /* drives the GPO# pin */ +#define LM80_CFG_INIT (1<<7) /* restore power on defaults */ + +/* LM80_ISRC_1 Interrupt Status Register 1 */ +/* LM80_IMSK_1 Interrupt Mask Register 1 */ +#define LM80_IS_VT0 (1<<0) /* limit exceeded for Voltage 0 */ +#define LM80_IS_VT1 (1<<1) /* limit exceeded for Voltage 1 */ +#define LM80_IS_VT2 (1<<2) /* limit exceeded for Voltage 2 */ +#define LM80_IS_VT3 (1<<3) /* limit exceeded for Voltage 3 */ +#define LM80_IS_VT4 (1<<4) /* limit exceeded for Voltage 4 */ +#define LM80_IS_VT5 (1<<5) /* limit exceeded for Voltage 5 */ +#define LM80_IS_VT6 (1<<6) /* limit exceeded for Voltage 6 */ +#define LM80_IS_INT_IN (1<<7) /* state of INT_IN# */ + +/* LM80_ISRC_2 Interrupt Status Register 2 */ +/* LM80_IMSK_2 Interrupt Mask Register 2 */ +#define LM80_IS_TEMP (1<<0) /* HOT temperature limit exceeded */ +#define LM80_IS_BTI (1<<1) /* state of BTI# pin */ +#define LM80_IS_FAN1 (1<<2) /* count limit exceeded for Fan 1 */ +#define LM80_IS_FAN2 (1<<3) /* count limit exceeded for Fan 2 */ +#define LM80_IS_CI (1<<4) /* Chassis Intrusion occured */ +#define LM80_IS_OS (1<<5) /* OS temperature limit exceeded */ + /* bit 6 and 7 are reserved in LM80_ISRC_2 */ +#define LM80_IS_HT_IRQ_MD (1<<6) /* Hot temperature interrupt mode */ +#define LM80_IS_OT_IRQ_MD (1<<7) /* OS temperature interrupt mode */ + +/* LM80_FAN_CTRL Fan Devisor/RST#/OS# Register */ +#define LM80_FAN1_MD_SEL (1<<0) /* Fan 1 mode select */ +#define LM80_FAN2_MD_SEL (1<<1) /* Fan 2 mode select */ +#define LM80_FAN1_PRM_CTL (3<<2) /* Fan 1 speed control */ +#define LM80_FAN2_PRM_CTL (3<<4) /* Fan 2 speed control */ +#define LM80_FAN_OS_ENA (1<<6) /* enable OS mode on RST_OUT#/OS# pins*/ +#define LM80_FAN_RST_ENA (1<<7) /* sets RST_OUT#/OS# pins in RST mode */ + +/* LM80_TEMP_CTRL OS# Config, Temp Res. Reg */ +#define LM80_TEMP_OS_STAT (1<<0) /* mirrors the state of RST_OUT#/OS# */ +#define LM80_TEMP_OS_POL (1<<1) /* select OS# polarity */ +#define LM80_TEMP_OS_MODE (1<<2) /* selects Interrupt mode */ +#define LM80_TEMP_RES (1<<3) /* selects 9 or 11 bit temp resulution*/ +#define LM80_TEMP_LSB (0xf<<4)/* 4 LSBs of 11 bit temp data */ +#define LM80_TEMP_LSB_9 (1<<7) /* LSB of 9 bit temperature data */ + + /* 0x07 - 0x1f reserved */ +/* LM80_VT0_IN current Voltage 0 value */ +/* LM80_VT1_IN current Voltage 1 value */ +/* LM80_VT2_IN current Voltage 2 value */ +/* LM80_VT3_IN current Voltage 3 value */ +/* LM80_VT4_IN current Voltage 4 value */ +/* LM80_VT5_IN current Voltage 5 value */ +/* LM80_VT6_IN current Voltage 6 value */ +/* LM80_TEMP_IN current temperature value */ +/* LM80_FAN1_IN current Fan 1 count */ +/* LM80_FAN2_IN current Fan 2 count */ +/* LM80_VT0_HIGH_LIM high limit val for Voltage 0 */ +/* LM80_VT0_LOW_LIM low limit val for Voltage 0 */ +/* LM80_VT1_HIGH_LIM high limit val for Voltage 1 */ +/* LM80_VT1_LOW_LIM low limit val for Voltage 1 */ +/* LM80_VT2_HIGH_LIM high limit val for Voltage 2 */ +/* LM80_VT2_LOW_LIM low limit val for Voltage 2 */ +/* LM80_VT3_HIGH_LIM high limit val for Voltage 3 */ +/* LM80_VT3_LOW_LIM low limit val for Voltage 3 */ +/* LM80_VT4_HIGH_LIM high limit val for Voltage 4 */ +/* LM80_VT4_LOW_LIM low limit val for Voltage 4 */ +/* LM80_VT5_HIGH_LIM high limit val for Voltage 5 */ +/* LM80_VT5_LOW_LIM low limit val for Voltage 5 */ +/* LM80_VT6_HIGH_LIM high limit val for Voltage 6 */ +/* LM80_VT6_LOW_LIM low limit val for Voltage 6 */ +/* LM80_THOT_LIM_UP hot temperature limit (high) */ +/* LM80_THOT_LIM_LO hot temperature limit (low) */ +/* LM80_TOS_LIM_UP OS temperature limit (high) */ +/* LM80_TOS_LIM_LO OS temperature limit (low) */ +/* LM80_FAN1_COUNT_LIM Fan 1 count limit (high) */ +/* LM80_FAN2_COUNT_LIM Fan 2 count limit (low) */ + /* 0x3e - 0x3f reserved */ + +#define LM80_ADDR 0x28 /* LM80 default addr */ + +/* typedefs *******************************************************************/ + + +/* function prototypes ********************************************************/ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __INC_LM80_H */ diff --git a/drivers/net/sk98lin/h/skaddr.h b/drivers/net/sk98lin/h/skaddr.h new file mode 100644 index 0000000000..711f873e7f --- /dev/null +++ b/drivers/net/sk98lin/h/skaddr.h @@ -0,0 +1,425 @@ +/****************************************************************************** + * + * Name: skaddr.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.26 $ + * Date: $Date: 2002/11/15 07:24:42 $ + * Purpose: Header file for Address Management (MC, UC, Prom). + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2001 SysKonnect GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * History: + * + * $Log: skaddr.h,v $ + * Revision 1.26 2002/11/15 07:24:42 tschilli + * SK_ADDR_EQUAL macro fixed. + * + * Revision 1.25 2002/06/10 13:55:18 tschilli + * Changes for handling YUKON. + * All changes are internally and not visible to the programmer + * using this module. + * + * Revision 1.24 2001/01/22 13:41:34 rassmann + * Supporting two nets on dual-port adapters. + * + * Revision 1.23 2000/08/10 11:27:50 rassmann + * Editorial changes. + * Preserving 32-bit alignment in structs for the adapter context. + * + * Revision 1.22 2000/08/07 11:10:40 rassmann + * Editorial changes. + * + * Revision 1.21 2000/05/04 09:39:59 rassmann + * Editorial changes. + * Corrected multicast address hashing. + * + * Revision 1.20 1999/11/22 13:46:14 cgoos + * Changed license header to GPL. + * Allowing overwrite for SK_ADDR_EQUAL. + * + * Revision 1.19 1999/05/28 10:56:07 rassmann + * Editorial changes. + * + * Revision 1.18 1999/04/06 17:22:04 rassmann + * Added private "ActivePort". + * + * Revision 1.17 1999/01/14 16:18:19 rassmann + * Corrected multicast initialization. + * + * Revision 1.16 1999/01/04 10:30:36 rassmann + * SkAddrOverride only possible after SK_INIT_IO phase. + * + * Revision 1.15 1998/12/29 13:13:11 rassmann + * An address override is now preserved in the SK_INIT_IO phase. + * All functions return an int now. + * Extended parameter checking. + * + * Revision 1.14 1998/11/24 12:39:45 rassmann + * Reserved multicast entry for BPDU address. + * 13 multicast entries left for protocol. + * + * Revision 1.13 1998/11/13 17:24:32 rassmann + * Changed return value of SkAddrOverride to int. + * + * Revision 1.12 1998/11/13 16:56:19 rassmann + * Added macro SK_ADDR_COMPARE. + * Changed return type of SkAddrOverride to SK_BOOL. + * + * Revision 1.11 1998/10/28 18:16:35 rassmann + * Avoiding I/Os before SK_INIT_RUN level. + * Aligning InexactFilter. + * + * Revision 1.10 1998/10/22 11:39:10 rassmann + * Corrected signed/unsigned mismatches. + * + * Revision 1.9 1998/10/15 15:15:49 rassmann + * Changed Flags Parameters from SK_U8 to int. + * Checked with lint. + * + * Revision 1.8 1998/09/24 19:15:12 rassmann + * Code cleanup. + * + * Revision 1.7 1998/09/18 20:22:13 rassmann + * Added HW access. + * + * Revision 1.6 1998/09/04 19:40:20 rassmann + * Interface enhancements. + * + * Revision 1.5 1998/09/04 12:40:57 rassmann + * Interface cleanup. + * + * Revision 1.4 1998/09/04 12:14:13 rassmann + * Interface cleanup. + * + * Revision 1.3 1998/09/02 16:56:40 rassmann + * Updated interface. + * + * Revision 1.2 1998/08/27 14:26:09 rassmann + * Updated interface. + * + * Revision 1.1 1998/08/21 08:31:08 rassmann + * First public version. + * + ******************************************************************************/ + +/****************************************************************************** + * + * Description: + * + * This module is intended to manage multicast addresses and promiscuous mode + * on GEnesis adapters. + * + * Include File Hierarchy: + * + * "skdrv1st.h" + * ... + * "sktypes.h" + * "skqueue.h" + * "skaddr.h" + * ... + * "skdrv2nd.h" + * + ******************************************************************************/ + +#ifndef __INC_SKADDR_H +#define __INC_SKADDR_H + +#ifdef __cplusplus +#error C++ is not yet supported. +extern "C" { +#endif /* cplusplus */ + +/* defines ********************************************************************/ + +#define SK_MAC_ADDR_LEN 6 /* Length of MAC address. */ +#define SK_MAX_ADDRS 14 /* #Addrs for exact match. */ + +/* ----- Common return values ----- */ + +#define SK_ADDR_SUCCESS 0 /* Function returned successfully. */ +#define SK_ADDR_ILLEGAL_PORT 100 /* Port number too high. */ +#define SK_ADDR_TOO_EARLY 101 /* Function called too early. */ + +/* ----- Clear/Add flag bits ----- */ + +#define SK_ADDR_PERMANENT 1 /* RLMT Address */ + +/* ----- Additional Clear flag bits ----- */ + +#define SK_MC_SW_ONLY 2 /* Do not update HW when clearing. */ + +/* ----- Override flag bits ----- */ + +#define SK_ADDR_LOGICAL_ADDRESS 0 +#define SK_ADDR_VIRTUAL_ADDRESS (SK_ADDR_LOGICAL_ADDRESS) /* old */ +#define SK_ADDR_PHYSICAL_ADDRESS 1 +#define SK_ADDR_CLEAR_LOGICAL 2 +#define SK_ADDR_SET_LOGICAL 4 + +/* ----- Override return values ----- */ + +#define SK_ADDR_OVERRIDE_SUCCESS (SK_ADDR_SUCCESS) +#define SK_ADDR_DUPLICATE_ADDRESS 1 +#define SK_ADDR_MULTICAST_ADDRESS 2 + +/* ----- Partitioning of excact match table ----- */ + +#define SK_ADDR_EXACT_MATCHES 16 /* #Exact match entries. */ + +#define SK_ADDR_FIRST_MATCH_RLMT 1 +#define SK_ADDR_LAST_MATCH_RLMT 2 +#define SK_ADDR_FIRST_MATCH_DRV 3 +#define SK_ADDR_LAST_MATCH_DRV (SK_ADDR_EXACT_MATCHES - 1) + +/* ----- SkAddrMcAdd/SkAddrMcUpdate return values ----- */ + +#define SK_MC_FILTERING_EXACT 0 /* Exact filtering. */ +#define SK_MC_FILTERING_INEXACT 1 /* Inexact filtering. */ + +/* ----- Additional SkAddrMcAdd return values ----- */ + +#define SK_MC_ILLEGAL_ADDRESS 2 /* Illegal address. */ +#define SK_MC_ILLEGAL_PORT 3 /* Illegal port (not the active one). */ +#define SK_MC_RLMT_OVERFLOW 4 /* Too many RLMT mc addresses. */ + +/* Promiscuous mode bits ----- */ + +#define SK_PROM_MODE_NONE 0 /* Normal receive. */ +#define SK_PROM_MODE_LLC 1 /* Receive all LLC frames. */ +#define SK_PROM_MODE_ALL_MC 2 /* Receive all multicast frames. */ +/* #define SK_PROM_MODE_NON_LLC 4 */ /* Receive all non-LLC frames. */ + +/* Macros */ + +#if 0 +#ifndef SK_ADDR_EQUAL +/* + * "&" instead of "&&" allows better optimization on IA-64. + * The replacement is safe here, as all bytes exist. + */ +#ifndef SK_ADDR_DWORD_COMPARE +#define SK_ADDR_EQUAL(A1,A2) ( \ + (((SK_U8 *)(A1))[5] == ((SK_U8 *)(A2))[5]) & \ + (((SK_U8 *)(A1))[4] == ((SK_U8 *)(A2))[4]) & \ + (((SK_U8 *)(A1))[3] == ((SK_U8 *)(A2))[3]) & \ + (((SK_U8 *)(A1))[2] == ((SK_U8 *)(A2))[2]) & \ + (((SK_U8 *)(A1))[1] == ((SK_U8 *)(A2))[1]) & \ + (((SK_U8 *)(A1))[0] == ((SK_U8 *)(A2))[0])) +#else /* SK_ADDR_DWORD_COMPARE */ +#define SK_ADDR_EQUAL(A1,A2) ( \ + (*(SK_U32 *)&(((SK_U8 *)(A1))[2]) == *(SK_U32 *)&(((SK_U8 *)(A2))[2])) & \ + (*(SK_U32 *)&(((SK_U8 *)(A1))[0]) == *(SK_U32 *)&(((SK_U8 *)(A2))[0]))) +#endif /* SK_ADDR_DWORD_COMPARE */ +#endif /* SK_ADDR_EQUAL */ +#endif /* 0 */ + +#ifndef SK_ADDR_EQUAL +#ifndef SK_ADDR_DWORD_COMPARE +#define SK_ADDR_EQUAL(A1,A2) ( \ + (((SK_U8 *)(A1))[5] == ((SK_U8 *)(A2))[5]) & \ + (((SK_U8 *)(A1))[4] == ((SK_U8 *)(A2))[4]) & \ + (((SK_U8 *)(A1))[3] == ((SK_U8 *)(A2))[3]) & \ + (((SK_U8 *)(A1))[2] == ((SK_U8 *)(A2))[2]) & \ + (((SK_U8 *)(A1))[1] == ((SK_U8 *)(A2))[1]) & \ + (((SK_U8 *)(A1))[0] == ((SK_U8 *)(A2))[0])) +#else /* SK_ADDR_DWORD_COMPARE */ +#define SK_ADDR_EQUAL(A1,A2) ( \ + (*(SK_U16 *)&(((SK_U8 *)(A1))[4]) == *(SK_U16 *)&(((SK_U8 *)(A2))[4])) && \ + (*(SK_U32 *)&(((SK_U8 *)(A1))[0]) == *(SK_U32 *)&(((SK_U8 *)(A2))[0]))) +#endif /* SK_ADDR_DWORD_COMPARE */ +#endif /* SK_ADDR_EQUAL */ + +/* typedefs *******************************************************************/ + +typedef struct s_MacAddr { + SK_U8 a[SK_MAC_ADDR_LEN]; +} SK_MAC_ADDR; + + +/* SK_FILTER is used to ensure alignment of the filter. */ +typedef union s_InexactFilter { + SK_U8 Bytes[8]; + SK_U64 Val; /* Dummy entry for alignment only. */ +} SK_FILTER64; + + +typedef struct s_AddrNet SK_ADDR_NET; + + +typedef struct s_AddrPort { + +/* ----- Public part (read-only) ----- */ + + SK_MAC_ADDR CurrentMacAddress; /* Current physical MAC Address. */ + SK_MAC_ADDR PermanentMacAddress; /* Permanent physical MAC Address. */ + int PromMode; /* Promiscuous Mode. */ + +/* ----- Private part ----- */ + + SK_MAC_ADDR PreviousMacAddress; /* Prev. phys. MAC Address. */ + SK_BOOL CurrentMacAddressSet; /* CurrentMacAddress is set. */ + SK_U8 Align01; + + SK_U32 FirstExactMatchRlmt; + SK_U32 NextExactMatchRlmt; + SK_U32 FirstExactMatchDrv; + SK_U32 NextExactMatchDrv; + SK_MAC_ADDR Exact[SK_ADDR_EXACT_MATCHES]; + SK_FILTER64 InexactFilter; /* For 64-bit hash register. */ + SK_FILTER64 InexactRlmtFilter; /* For 64-bit hash register. */ + SK_FILTER64 InexactDrvFilter; /* For 64-bit hash register. */ +} SK_ADDR_PORT; + + +struct s_AddrNet { +/* ----- Public part (read-only) ----- */ + + SK_MAC_ADDR CurrentMacAddress; /* Logical MAC Address. */ + SK_MAC_ADDR PermanentMacAddress; /* Logical MAC Address. */ + +/* ----- Private part ----- */ + + SK_U32 ActivePort; /* View of module ADDR. */ + SK_BOOL CurrentMacAddressSet; /* CurrentMacAddress is set. */ + SK_U8 Align01; + SK_U16 Align02; +}; + + +typedef struct s_Addr { + +/* ----- Public part (read-only) ----- */ + + SK_ADDR_NET Net[SK_MAX_NETS]; + SK_ADDR_PORT Port[SK_MAX_MACS]; + +/* ----- Private part ----- */ +} SK_ADDR; + +/* function prototypes ********************************************************/ + +#ifndef SK_KR_PROTO + +/* Functions provided by SkAddr */ + +/* ANSI/C++ compliant function prototypes */ + +extern int SkAddrInit( + SK_AC *pAC, + SK_IOC IoC, + int Level); + +extern int SkAddrMcClear( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 PortNumber, + int Flags); + +extern int SkAddrXmacMcClear( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 PortNumber, + int Flags); + +extern int SkAddrGmacMcClear( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 PortNumber, + int Flags); + +extern int SkAddrMcAdd( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 PortNumber, + SK_MAC_ADDR *pMc, + int Flags); + +extern int SkAddrXmacMcAdd( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 PortNumber, + SK_MAC_ADDR *pMc, + int Flags); + +extern int SkAddrGmacMcAdd( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 PortNumber, + SK_MAC_ADDR *pMc, + int Flags); + +extern int SkAddrMcUpdate( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 PortNumber); + +extern int SkAddrXmacMcUpdate( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 PortNumber); + +extern int SkAddrGmacMcUpdate( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 PortNumber); + +extern int SkAddrOverride( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 PortNumber, + SK_MAC_ADDR *pNewAddr, + int Flags); + +extern int SkAddrPromiscuousChange( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 PortNumber, + int NewPromMode); + +extern int SkAddrXmacPromiscuousChange( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 PortNumber, + int NewPromMode); + +extern int SkAddrGmacPromiscuousChange( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 PortNumber, + int NewPromMode); + +extern int SkAddrSwap( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 FromPortNumber, + SK_U32 ToPortNumber); + +#else /* defined(SK_KR_PROTO)) */ + +/* Non-ANSI/C++ compliant function prototypes */ + +#error KR-style prototypes are not yet provided. + +#endif /* defined(SK_KR_PROTO)) */ + + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __INC_SKADDR_H */ diff --git a/drivers/net/sk98lin/h/skcsum.h b/drivers/net/sk98lin/h/skcsum.h new file mode 100644 index 0000000000..2acae329e3 --- /dev/null +++ b/drivers/net/sk98lin/h/skcsum.h @@ -0,0 +1,261 @@ +/****************************************************************************** + * + * Name: skcsum.h + * Project: GEnesis - SysKonnect SK-NET Gigabit Ethernet (SK-98xx) + * Version: $Revision: 1.9 $ + * Date: $Date: 2001/02/06 11:21:39 $ + * Purpose: Store/verify Internet checksum in send/receive packets. + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2001 SysKonnect GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * History: + * + * $Log: skcsum.h,v $ + * Revision 1.9 2001/02/06 11:21:39 rassmann + * Editorial changes. + * + * Revision 1.8 2001/02/06 11:15:36 rassmann + * Supporting two nets on dual-port adapters. + * + * Revision 1.7 2000/06/29 13:17:05 rassmann + * Corrected reception of a packet with UDP checksum == 0 (which means there + * is no UDP checksum). + * + * Revision 1.6 2000/02/28 12:33:44 cgoos + * Changed C++ style comments to C style. + * + * Revision 1.5 2000/02/21 12:10:05 cgoos + * Fixed license comment. + * + * Revision 1.4 2000/02/21 11:08:37 cgoos + * Merged changes back into common source. + * + * Revision 1.1 1999/07/26 14:47:49 mkarl + * changed from common source to windows specific source + * added return SKCS_STATUS_IP_CSUM_ERROR_UDP and + * SKCS_STATUS_IP_CSUM_ERROR_TCP to pass the NidsTester + * changes for Tx csum offload + * + * Revision 1.2 1998/09/04 12:16:34 mhaveman + * Checked in for Stephan to allow compilation. + * -Added definition SK_CSUM_EVENT_CLEAR_PROTO_STATS to clear statistic + * -Added prototype for SkCsEvent() + * + * Revision 1.1 1998/09/01 15:36:53 swolf + * initial revision + * + * 01-Sep-1998 sw Created. + * + ******************************************************************************/ + +/****************************************************************************** + * + * Description: + * + * Public header file for the "GEnesis" common module "CSUM". + * + * "GEnesis" is an abbreviation of "Gigabit Ethernet Network System in Silicon" + * and is the code name of this SysKonnect project. + * + * Compilation Options: + * + * SK_USE_CSUM - Define if CSUM is to be used. Otherwise, CSUM will be an + * empty module. + * + * SKCS_OVERWRITE_PROTO - Define to overwrite the default protocol id + * definitions. In this case, all SKCS_PROTO_xxx definitions must be made + * external. + * + * SKCS_OVERWRITE_STATUS - Define to overwrite the default return status + * definitions. In this case, all SKCS_STATUS_xxx definitions must be made + * external. + * + * Include File Hierarchy: + * + * "h/skcsum.h" + * "h/sktypes.h" + * "h/skqueue.h" + * + ******************************************************************************/ + +#ifndef __INC_SKCSUM_H +#define __INC_SKCSUM_H + +#include "h/sktypes.h" +#include "h/skqueue.h" + +/* defines ********************************************************************/ + +/* + * Define the default bit flags for 'SKCS_PACKET_INFO.ProtocolFlags' if no user + * overwrite. + */ +#ifndef SKCS_OVERWRITE_PROTO /* User overwrite? */ +#define SKCS_PROTO_IP 0x1 /* IP (Internet Protocol version 4) */ +#define SKCS_PROTO_TCP 0x2 /* TCP (Transmission Control Protocol) */ +#define SKCS_PROTO_UDP 0x4 /* UDP (User Datagram Protocol) */ + +/* Indices for protocol statistics. */ +#define SKCS_PROTO_STATS_IP 0 +#define SKCS_PROTO_STATS_UDP 1 +#define SKCS_PROTO_STATS_TCP 2 +#define SKCS_NUM_PROTOCOLS 3 /* Number of supported protocols. */ +#endif /* !SKCS_OVERWRITE_PROTO */ + +/* + * Define the default SKCS_STATUS type and values if no user overwrite. + * + * SKCS_STATUS_UNKNOWN_IP_VERSION - Not an IP v4 frame. + * SKCS_STATUS_IP_CSUM_ERROR - IP checksum error. + * SKCS_STATUS_IP_CSUM_ERROR_TCP - IP checksum error in TCP frame. + * SKCS_STATUS_IP_CSUM_ERROR_UDP - IP checksum error in UDP frame + * SKCS_STATUS_IP_FRAGMENT - IP fragment (IP checksum ok). + * SKCS_STATUS_IP_CSUM_OK - IP checksum ok (not a TCP or UDP frame). + * SKCS_STATUS_TCP_CSUM_ERROR - TCP checksum error (IP checksum ok). + * SKCS_STATUS_UDP_CSUM_ERROR - UDP checksum error (IP checksum ok). + * SKCS_STATUS_TCP_CSUM_OK - IP and TCP checksum ok. + * SKCS_STATUS_UDP_CSUM_OK - IP and UDP checksum ok. + * SKCS_STATUS_IP_CSUM_OK_NO_UDP - IP checksum OK and no UDP checksum. + */ +#ifndef SKCS_OVERWRITE_STATUS /* User overwrite? */ +#define SKCS_STATUS int /* Define status type. */ + +#define SKCS_STATUS_UNKNOWN_IP_VERSION 1 +#define SKCS_STATUS_IP_CSUM_ERROR 2 +#define SKCS_STATUS_IP_FRAGMENT 3 +#define SKCS_STATUS_IP_CSUM_OK 4 +#define SKCS_STATUS_TCP_CSUM_ERROR 5 +#define SKCS_STATUS_UDP_CSUM_ERROR 6 +#define SKCS_STATUS_TCP_CSUM_OK 7 +#define SKCS_STATUS_UDP_CSUM_OK 8 +/* needed for Microsoft */ +#define SKCS_STATUS_IP_CSUM_ERROR_UDP 9 +#define SKCS_STATUS_IP_CSUM_ERROR_TCP 10 +/* UDP checksum may be omitted */ +#define SKCS_STATUS_IP_CSUM_OK_NO_UDP 11 +#endif /* !SKCS_OVERWRITE_STATUS */ + +/* Clear protocol statistics event. */ +#define SK_CSUM_EVENT_CLEAR_PROTO_STATS 1 + +/* + * Add two values in one's complement. + * + * Note: One of the two input values may be "longer" than 16-bit, but then the + * resulting sum may be 17 bits long. In this case, add zero to the result using + * SKCS_OC_ADD() again. + * + * Result = Value1 + Value2 + */ +#define SKCS_OC_ADD(Result, Value1, Value2) { \ + unsigned long Sum; \ + \ + Sum = (unsigned long) (Value1) + (unsigned long) (Value2); \ + /* Add-in any carry. */ \ + (Result) = (Sum & 0xffff) + (Sum >> 16); \ +} + +/* + * Subtract two values in one's complement. + * + * Result = Value1 - Value2 + */ +#define SKCS_OC_SUB(Result, Value1, Value2) \ + SKCS_OC_ADD((Result), (Value1), ~(Value2) & 0xffff) + +/* typedefs *******************************************************************/ + +/* + * SKCS_PROTO_STATS - The CSUM protocol statistics structure. + * + * There is one instance of this structure for each protocol supported. + */ +typedef struct s_CsProtocolStatistics { + SK_U64 RxOkCts; /* Receive checksum ok. */ + SK_U64 RxUnableCts; /* Unable to verify receive checksum. */ + SK_U64 RxErrCts; /* Receive checksum error. */ + SK_U64 TxOkCts; /* Transmit checksum ok. */ + SK_U64 TxUnableCts; /* Unable to calculate checksum in hw. */ +} SKCS_PROTO_STATS; + +/* + * s_Csum - The CSUM module context structure. + */ +typedef struct s_Csum { + /* Enabled receive SK_PROTO_XXX bit flags. */ + unsigned ReceiveFlags[SK_MAX_NETS]; +#ifdef TX_CSUM + unsigned TransmitFlags[SK_MAX_NETS]; +#endif /* TX_CSUM */ + + /* The protocol statistics structure; one per supported protocol. */ + SKCS_PROTO_STATS ProtoStats[SK_MAX_NETS][SKCS_NUM_PROTOCOLS]; +} SK_CSUM; + +/* + * SKCS_PACKET_INFO - The packet information structure. + */ +typedef struct s_CsPacketInfo { + /* Bit field specifiying the desired/found protocols. */ + unsigned ProtocolFlags; + + /* Length of complete IP header, including any option fields. */ + unsigned IpHeaderLength; + + /* IP header checksum. */ + unsigned IpHeaderChecksum; + + /* TCP/UDP pseudo header checksum. */ + unsigned PseudoHeaderChecksum; +} SKCS_PACKET_INFO; + +/* function prototypes ********************************************************/ + +#ifndef SkCsCalculateChecksum +extern unsigned SkCsCalculateChecksum( + void *pData, + unsigned Length); +#endif + +extern int SkCsEvent( + SK_AC *pAc, + SK_IOC Ioc, + SK_U32 Event, + SK_EVPARA Param); + +extern SKCS_STATUS SkCsGetReceiveInfo( + SK_AC *pAc, + void *pIpHeader, + unsigned Checksum1, + unsigned Checksum2, + int NetNumber); + +extern void SkCsGetSendInfo( + SK_AC *pAc, + void *pIpHeader, + SKCS_PACKET_INFO *pPacketInfo, + int NetNumber); + +extern void SkCsSetReceiveFlags( + SK_AC *pAc, + unsigned ReceiveFlags, + unsigned *pChecksum1Offset, + unsigned *pChecksum2Offset, + int NetNumber); + +#endif /* __INC_SKCSUM_H */ diff --git a/drivers/net/sk98lin/h/skdebug.h b/drivers/net/sk98lin/h/skdebug.h new file mode 100644 index 0000000000..cf5b5ad332 --- /dev/null +++ b/drivers/net/sk98lin/h/skdebug.h @@ -0,0 +1,119 @@ +/****************************************************************************** + * + * Name: skdebug.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.12 $ + * Date: $Date: 2002/07/15 15:37:13 $ + * Purpose: SK specific DEBUG support + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * History: + * $Log: skdebug.h,v $ + * Revision 1.12 2002/07/15 15:37:13 rschmidt + * Power Management support + * Editorial changes + * + * Revision 1.11 2002/04/25 11:04:39 rschmidt + * Editorial changes + * + * Revision 1.10 1999/11/22 13:47:40 cgoos + * Changed license header to GPL. + * + * Revision 1.9 1999/09/14 14:02:43 rwahl + * Added SK_DBGMOD_PECP. + * + * Revision 1.8 1998/11/25 08:31:54 gklug + * fix: no C++ comments allowed in common sources + * + * Revision 1.7 1998/11/24 16:47:24 swolf + * Driver may now define its own SK_DBG_MSG() (eg. in "h/skdrv1st.h"). + * + * Revision 1.6 1998/10/28 10:23:55 rassmann + * ADDED SK_DBGMOD_ADDR. + * + * Revision 1.5 1998/10/22 09:43:55 gklug + * add: CSUM module + * + * Revision 1.4 1998/10/01 07:54:44 gklug + * add: PNMI debug module + * + * Revision 1.3 1998/09/18 08:32:34 afischer + * Macros changed according ssr-spec.: + * SK_DBG_MODCHK -> SK_DBG_CHKMOD + * SK_DBG_CATCHK -> SK_DBG_CHKCAT + * + * Revision 1.2 1998/07/03 14:38:25 malthoff + * Add category SK_DBGCAT_FATAL. + * + * Revision 1.1 1998/06/19 13:39:01 malthoff + * created. + * + * + ******************************************************************************/ + +#ifndef __INC_SKDEBUG_H +#define __INC_SKDEBUG_H + +#ifdef DEBUG +#ifndef SK_DBG_MSG +#define SK_DBG_MSG(pAC,comp,cat,arg) \ + if ( ((comp) & SK_DBG_CHKMOD(pAC)) && \ + ((cat) & SK_DBG_CHKCAT(pAC)) ) { \ + SK_DBG_PRINTF arg ; \ + } +#endif +#else +#define SK_DBG_MSG(pAC,comp,lev,arg) +#endif + +/* PLS NOTE: + * ========= + * Due to any restrictions of kernel printf routines do not use other + * format identifiers as: %x %d %c %s . + * Never use any combined format identifiers such as: %lx %ld in your + * printf - argument (arg) because some OS specific kernel printfs may + * only support some basic identifiers. + */ + +/* Debug modules */ + +#define SK_DBGMOD_MERR 0x00000001L /* general module error indication */ +#define SK_DBGMOD_HWM 0x00000002L /* Hardware init module */ +#define SK_DBGMOD_RLMT 0x00000004L /* RLMT module */ +#define SK_DBGMOD_VPD 0x00000008L /* VPD module */ +#define SK_DBGMOD_I2C 0x00000010L /* I2C module */ +#define SK_DBGMOD_PNMI 0x00000020L /* PNMI module */ +#define SK_DBGMOD_CSUM 0x00000040L /* CSUM module */ +#define SK_DBGMOD_ADDR 0x00000080L /* ADDR module */ +#define SK_DBGMOD_PECP 0x00000100L /* PECP module */ +#define SK_DBGMOD_POWM 0x00000200L /* Power Management module */ + +/* Debug events */ + +#define SK_DBGCAT_INIT 0x00000001L /* module/driver initialization */ +#define SK_DBGCAT_CTRL 0x00000002L /* controlling devices */ +#define SK_DBGCAT_ERR 0x00000004L /* error handling paths */ +#define SK_DBGCAT_TX 0x00000008L /* transmit path */ +#define SK_DBGCAT_RX 0x00000010L /* receive path */ +#define SK_DBGCAT_IRQ 0x00000020L /* general IRQ handling */ +#define SK_DBGCAT_QUEUE 0x00000040L /* any queue management */ +#define SK_DBGCAT_DUMP 0x00000080L /* large data output e.g. hex dump */ +#define SK_DBGCAT_FATAL 0x00000100L /* fatal error */ + +#endif /* __INC_SKDEBUG_H */ diff --git a/drivers/net/sk98lin/h/skdrv1st.h b/drivers/net/sk98lin/h/skdrv1st.h new file mode 100644 index 0000000000..af34d7b96f --- /dev/null +++ b/drivers/net/sk98lin/h/skdrv1st.h @@ -0,0 +1,264 @@ +/****************************************************************************** + * + * Name: skdrv1st.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.11 $ + * Date: $Date: 2003/02/25 14:16:40 $ + * Purpose: First header file for driver and all other modules + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2003 SysKonnect GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * History: + * + * $Log: skdrv1st.h,v $ + * Revision 1.11 2003/02/25 14:16:40 mlindner + * Fix: Copyright statement + * + * Revision 1.10 2002/10/02 12:46:02 mlindner + * Add: Support for Yukon + * + * Revision 1.9.2.2 2001/12/07 12:06:42 mlindner + * Fix: malloc -> slab changes + * + * Revision 1.9.2.1 2001/03/12 16:50:59 mlindner + * chg: kernel 2.4 adaption + * + * Revision 1.9 2001/01/22 14:16:04 mlindner + * added ProcFs functionality + * Dual Net functionality integrated + * Rlmt networks added + * + * Revision 1.8 2000/02/21 12:19:18 cgoos + * Added default for SK_DEBUG_CHKMOD/_CHKCAT + * + * Revision 1.7 1999/11/22 13:50:00 cgoos + * Changed license header to GPL. + * Added overwrite for several functions. + * Removed linux 2.0.x definitions. + * Removed PCI vendor ID definition (now in kernel). + * + * Revision 1.6 1999/07/27 08:03:33 cgoos + * Changed SK_IN/OUT macros to readX/writeX instead of memory + * accesses (necessary for ALPHA). + * + * Revision 1.5 1999/07/23 12:10:21 cgoos + * Removed SK_RLMT_SLOW_LOOKAHEAD define. + * + * Revision 1.4 1999/07/14 12:31:13 cgoos + * Added SK_RLMT_SLOW_LOOKAHEAD define. + * + * Revision 1.3 1999/04/07 10:12:54 cgoos + * Added check for KERNEL and OPTIMIZATION defines. + * + * Revision 1.2 1999/03/01 08:51:47 cgoos + * Fixed pcibios_read/write definitions. + * + * Revision 1.1 1999/02/16 07:40:49 cgoos + * First version. + * + * + * + ******************************************************************************/ + +/****************************************************************************** + * + * Description: + * + * This is the first include file of the driver, which includes all + * neccessary system header files and some of the GEnesis header files. + * It also defines some basic items. + * + * Include File Hierarchy: + * + * see skge.c + * + ******************************************************************************/ + +#ifndef __INC_SKDRV1ST_H +#define __INC_SKDRV1ST_H + +#if 0 +/* Check kernel version */ +#include <linux/version.h> +#if (LINUX_VERSION_CODE > 0x020300) +#endif +#endif + +typedef struct s_AC SK_AC; + +/* override some default functions with optimized linux functions */ + +#define SK_PNMI_STORE_U16(p,v) memcpy((char*)(p),(char*)&(v),2) +#define SK_PNMI_STORE_U32(p,v) memcpy((char*)(p),(char*)&(v),4) +#define SK_PNMI_STORE_U64(p,v) memcpy((char*)(p),(char*)&(v),8) +#define SK_PNMI_READ_U16(p,v) memcpy((char*)&(v),(char*)(p),2) +#define SK_PNMI_READ_U32(p,v) memcpy((char*)&(v),(char*)(p),2) +#define SK_PNMI_READ_U64(p,v) memcpy((char*)&(v),(char*)(p),2) + +#define SkCsCalculateChecksum(p,l) ((~ip_compute_csum(p, l)) & 0xffff) + +#define SK_ADDR_EQUAL(a1,a2) (!memcmp(a1,a2,6)) + + +#if !defined(__OPTIMIZE__) || !defined(__KERNEL__) +#warning You must compile this file with the correct options! +#warning See the last lines of the source file. +#error You must compile this driver with "-O". +#endif + +#if 0 +#include <linux/version.h> +#endif +#include <linux/types.h> +#if 0 +#include <linux/kernel.h> +#endif +#include <linux/string.h> +#if 0 +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#endif +#include <asm/byteorder.h> +#include <asm/bitops.h> +#include <asm/io.h> +#if 0 +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> + +#include <linux/init.h> +#include <asm/uaccess.h> +#include <net/checksum.h> +#endif + +#include "h/sktypes.h" +#include "h/skerror.h" +#include "h/skdebug.h" +#include "h/lm80.h" +#include "h/xmac_ii.h" + +#include "u-boot_compat.h" + +#ifdef __LITTLE_ENDIAN +#define SK_LITTLE_ENDIAN +#else +#define SK_BIG_ENDIAN +#endif + +#if 0 +#define SK_NET_DEVICE net_device +#else +#define SK_NET_DEVICE eth_device +#endif + + +/* we use gethrtime(), return unit: nanoseconds */ +#if 0 +#define SK_TICKS_PER_SEC HZ +#else +#define SK_TICKS_PER_SEC CFG_HZ +#endif + +#define SK_MEM_MAPPED_IO + +/* #define SK_RLMT_SLOW_LOOKAHEAD */ + +#define SK_MAX_MACS 2 +#define SK_MAX_NETS 2 + +#define SK_IOC char* + +typedef struct s_DrvRlmtMbuf SK_MBUF; + +#define SK_CONST64 INT64_C +#define SK_CONSTU64 UINT64_C + +#define SK_MEMCPY(dest,src,size) memcpy(dest,src,size) +#define SK_MEMCMP(s1,s2,size) memcmp(s1,s2,size) +#define SK_MEMSET(dest,val,size) memset(dest,val,size) +#define SK_STRLEN(pStr) strlen((char*)(pStr)) +#define SK_STRNCPY(pDest,pSrc,size) strncpy((char*)(pDest),(char*)(pSrc),size) +#define SK_STRCMP(pStr1,pStr2) strcmp((char*)(pStr1),(char*)(pStr2)) + +/* macros to access the adapter */ +#define SK_OUT8(b,a,v) writeb((v), ((b)+(a))) +#define SK_OUT16(b,a,v) writew((v), ((b)+(a))) +#define SK_OUT32(b,a,v) writel((v), ((b)+(a))) +#define SK_IN8(b,a,pv) (*(pv) = readb((b)+(a))) +#define SK_IN16(b,a,pv) (*(pv) = readw((b)+(a))) +#define SK_IN32(b,a,pv) (*(pv) = readl((b)+(a))) + +#define int8_t char +#define int16_t short +#define int32_t long +#define int64_t long long +#define uint8_t u_char +#define uint16_t u_short +#define uint32_t u_long +#define uint64_t unsigned long long +#define t_scalar_t int +#define t_uscalar_t unsigned int +#define uintptr_t unsigned long + +#define __CONCAT__(A,B) A##B + +#define INT32_C(a) __CONCAT__(a,L) +#define INT64_C(a) __CONCAT__(a,LL) +#define UINT32_C(a) __CONCAT__(a,UL) +#define UINT64_C(a) __CONCAT__(a,ULL) + +#ifdef DEBUG +#define SK_DBG_PRINTF printk +#ifndef SK_DEBUG_CHKMOD +#define SK_DEBUG_CHKMOD 0 +#endif +#ifndef SK_DEBUG_CHKCAT +#define SK_DEBUG_CHKCAT 0 +#endif +/* those come from the makefile */ +#define SK_DBG_CHKMOD(pAC) (SK_DEBUG_CHKMOD) +#define SK_DBG_CHKCAT(pAC) (SK_DEBUG_CHKCAT) + +extern void SkDbgPrintf(const char *format,...); + +#define SK_DBGMOD_DRV 0x00010000 + +/**** possible driver debug categories ********************************/ +#define SK_DBGCAT_DRV_ENTRY 0x00010000 +#define SK_DBGCAT_DRV_SAP 0x00020000 +#define SK_DBGCAT_DRV_MCA 0x00040000 +#define SK_DBGCAT_DRV_TX_PROGRESS 0x00080000 +#define SK_DBGCAT_DRV_RX_PROGRESS 0x00100000 +#define SK_DBGCAT_DRV_PROGRESS 0x00200000 +#define SK_DBGCAT_DRV_MSG 0x00400000 +#define SK_DBGCAT_DRV_PROM 0x00800000 +#define SK_DBGCAT_DRV_TX_FRAME 0x01000000 +#define SK_DBGCAT_DRV_ERROR 0x02000000 +#define SK_DBGCAT_DRV_INT_SRC 0x04000000 +#define SK_DBGCAT_DRV_EVENT 0x08000000 + +#endif + +#define SK_ERR_LOG SkErrorLog + +extern void SkErrorLog(SK_AC*, int, int, char*); + +#endif diff --git a/drivers/net/sk98lin/h/skdrv2nd.h b/drivers/net/sk98lin/h/skdrv2nd.h new file mode 100644 index 0000000000..a311827aa7 --- /dev/null +++ b/drivers/net/sk98lin/h/skdrv2nd.h @@ -0,0 +1,561 @@ +/****************************************************************************** + * + * Name: skdrv2nd.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.15 $ + * Date: $Date: 2003/02/25 14:16:40 $ + * Purpose: Second header file for driver and all other modules + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2003 SysKonnect GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * History: + * + * $Log: skdrv2nd.h,v $ + * Revision 1.15 2003/02/25 14:16:40 mlindner + * Fix: Copyright statement + * + * Revision 1.14 2003/02/25 13:26:26 mlindner + * Add: Support for various vendors + * + * Revision 1.13 2002/10/02 12:46:02 mlindner + * Add: Support for Yukon + * + * Revision 1.12.2.2 2001/09/05 12:14:50 mlindner + * add: New hardware revision int + * + * Revision 1.12.2.1 2001/03/12 16:50:59 mlindner + * chg: kernel 2.4 adaption + * + * Revision 1.12 2001/03/01 12:52:15 mlindner + * Fixed ring size + * + * Revision 1.11 2001/02/19 13:28:02 mlindner + * Changed PNMI parameter values + * + * Revision 1.10 2001/01/22 14:16:04 mlindner + * added ProcFs functionality + * Dual Net functionality integrated + * Rlmt networks added + * + * Revision 1.1 2000/10/05 19:46:50 phargrov + * Add directory src/vipk_devs_nonlbl/vipk_sk98lin/ + * This is the SysKonnect SK-98xx Gigabit Ethernet driver, + * contributed by SysKonnect. + * + * Revision 1.9 2000/02/21 10:39:55 cgoos + * Added flag for jumbo support usage. + * + * Revision 1.8 1999/11/22 13:50:44 cgoos + * Changed license header to GPL. + * Fixed two comments. + * + * Revision 1.7 1999/09/28 12:38:21 cgoos + * Added CheckQueue to SK_AC. + * + * Revision 1.6 1999/07/27 08:04:05 cgoos + * Added checksumming variables to SK_AC. + * + * Revision 1.5 1999/03/29 12:33:26 cgoos + * Rreversed to fine lock granularity. + * + * Revision 1.4 1999/03/15 12:14:02 cgoos + * Added DriverLock to SK_AC. + * Removed other locks. + * + * Revision 1.3 1999/03/01 08:52:27 cgoos + * Changed pAC->PciDev declaration. + * + * Revision 1.2 1999/02/18 10:57:14 cgoos + * Removed SkDrvTimeStamp prototype. + * Fixed SkGeOsGetTime prototype. + * + * Revision 1.1 1999/02/16 07:41:01 cgoos + * First version. + * + * + * + ******************************************************************************/ + +/****************************************************************************** + * + * Description: + * + * This is the second include file of the driver, which includes all other + * neccessary files and defines all structures and constants used by the + * driver and the common modules. + * + * Include File Hierarchy: + * + * see skge.c + * + ******************************************************************************/ + +#ifndef __INC_SKDRV2ND_H +#define __INC_SKDRV2ND_H + +#include "h/skqueue.h" +#include "h/skgehwt.h" +#include "h/sktimer.h" +#include "h/ski2c.h" +#include "h/skgepnmi.h" +#include "h/skvpd.h" +#include "h/skgehw.h" +#include "h/skgeinit.h" +#include "h/skaddr.h" +#include "h/skgesirq.h" +#include "h/skcsum.h" +#include "h/skrlmt.h" +#include "h/skgedrv.h" + +#define SK_PCI_ISCOMPLIANT(result, pdev) { \ + result = SK_FALSE; /* default */ \ + /* 3Com (0x10b7) */ \ + if (pdev->vendor == 0x10b7) { \ + /* Gigabit Ethernet Adapter (0x1700) */ \ + if ((pdev->device == 0x1700)) { \ + result = SK_TRUE; \ + } \ + /* SysKonnect (0x1148) */ \ + } else if (pdev->vendor == 0x1148) { \ + /* SK-98xx Gigabit Ethernet Server Adapter (0x4300) */ \ + /* SK-98xx V2 Gigabit Ethernet Adapter (0x4320) */ \ + if ((pdev->device == 0x4300) || \ + (pdev->device == 0x4320)) { \ + result = SK_TRUE; \ + } \ + /* D-Link (0x1186) */ \ + } else if (pdev->vendor == 0x1186) { \ + /* Gigabit Ethernet Adapter (0x4c00) */ \ + if ((pdev->device == 0x4c00)) { \ + result = SK_TRUE; \ + } \ + /* CNet (0x1371) */ \ + } else if (pdev->vendor == 0x1371) { \ + /* GigaCard Network Adapter (0x434e) */ \ + if ((pdev->device == 0x434e)) { \ + result = SK_TRUE; \ + } \ + /* Linksys (0x1737) */ \ + } else if (pdev->vendor == 0x1737) { \ + /* Gigabit Network Adapter (0x1032) */ \ + /* Gigabit Network Adapter (0x1064) */ \ + if ((pdev->device == 0x1032) || \ + (pdev->device == 0x1064)) { \ + result = SK_TRUE; \ + } \ + } else { \ + result = SK_FALSE; \ + } \ +} + + +extern SK_MBUF *SkDrvAllocRlmtMbuf(SK_AC*, SK_IOC, unsigned); +extern void SkDrvFreeRlmtMbuf(SK_AC*, SK_IOC, SK_MBUF*); +extern SK_U64 SkOsGetTime(SK_AC*); +extern int SkPciReadCfgDWord(SK_AC*, int, SK_U32*); +extern int SkPciReadCfgWord(SK_AC*, int, SK_U16*); +extern int SkPciReadCfgByte(SK_AC*, int, SK_U8*); +extern int SkPciWriteCfgDWord(SK_AC*, int, SK_U32); +extern int SkPciWriteCfgWord(SK_AC*, int, SK_U16); +extern int SkPciWriteCfgByte(SK_AC*, int, SK_U8); +extern int SkDrvEvent(SK_AC*, SK_IOC IoC, SK_U32, SK_EVPARA); + +struct s_DrvRlmtMbuf { + SK_MBUF *pNext; /* Pointer to next RLMT Mbuf. */ + SK_U8 *pData; /* Data buffer (virtually contig.). */ + unsigned Size; /* Data buffer size. */ + unsigned Length; /* Length of packet (<= Size). */ + SK_U32 PortIdx; /* Receiving/transmitting port. */ +#ifdef SK_RLMT_MBUF_PRIVATE + SK_RLMT_MBUF Rlmt; /* Private part for RLMT. */ +#endif /* SK_RLMT_MBUF_PRIVATE */ + struct sk_buff *pOs; /* Pointer to message block */ +}; + + +/* + * ioctl definitions + */ +#define SK_IOCTL_BASE (SIOCDEVPRIVATE) +#define SK_IOCTL_GETMIB (SK_IOCTL_BASE + 0) +#define SK_IOCTL_SETMIB (SK_IOCTL_BASE + 1) +#define SK_IOCTL_PRESETMIB (SK_IOCTL_BASE + 2) + +typedef struct s_IOCTL SK_GE_IOCTL; + +struct s_IOCTL { + char* pData; + unsigned int Len; +}; + + +/* + * define sizes of descriptor rings in bytes + */ + +#if 0 +#define TX_RING_SIZE (8*1024) +#define RX_RING_SIZE (24*1024) +#else +#define TX_RING_SIZE (10 * 40) +#define RX_RING_SIZE (10 * 40) +#endif + +/* + * Buffer size for ethernet packets + */ +#define ETH_BUF_SIZE 1540 +#define ETH_MAX_MTU 1514 +#define ETH_MIN_MTU 60 +#define ETH_MULTICAST_BIT 0x01 +#define SK_JUMBO_MTU 9000 + +/* + * transmit priority selects the queue: LOW=asynchron, HIGH=synchron + */ +#define TX_PRIO_LOW 0 +#define TX_PRIO_HIGH 1 + +/* + * alignment of rx/tx descriptors + */ +#define DESCR_ALIGN 8 + +/* + * definitions for pnmi. TODO + */ +#define SK_DRIVER_RESET(pAC, IoC) 0 +#define SK_DRIVER_SENDEVENT(pAC, IoC) 0 +#define SK_DRIVER_SELFTEST(pAC, IoC) 0 +/* For get mtu you must add an own function */ +#define SK_DRIVER_GET_MTU(pAc,IoC,i) 0 +#define SK_DRIVER_SET_MTU(pAc,IoC,i,v) 0 +#define SK_DRIVER_PRESET_MTU(pAc,IoC,i,v) 0 + + +/* TX and RX descriptors *****************************************************/ + +typedef struct s_RxD RXD; /* the receive descriptor */ + +struct s_RxD { + volatile SK_U32 RBControl; /* Receive Buffer Control */ + SK_U32 VNextRxd; /* Next receive descriptor,low dword */ + SK_U32 VDataLow; /* Receive buffer Addr, low dword */ + SK_U32 VDataHigh; /* Receive buffer Addr, high dword */ + SK_U32 FrameStat; /* Receive Frame Status word */ + SK_U32 TimeStamp; /* Time stamp from XMAC */ + SK_U32 TcpSums; /* TCP Sum 2 / TCP Sum 1 */ + SK_U32 TcpSumStarts; /* TCP Sum Start 2 / TCP Sum Start 1 */ + RXD *pNextRxd; /* Pointer to next Rxd */ + struct sk_buff *pMBuf; /* Pointer to Linux' socket buffer */ +}; + +typedef struct s_TxD TXD; /* the transmit descriptor */ + +struct s_TxD { + volatile SK_U32 TBControl; /* Transmit Buffer Control */ + SK_U32 VNextTxd; /* Next transmit descriptor,low dword */ + SK_U32 VDataLow; /* Transmit Buffer Addr, low dword */ + SK_U32 VDataHigh; /* Transmit Buffer Addr, high dword */ + SK_U32 FrameStat; /* Transmit Frame Status Word */ + SK_U32 TcpSumOfs; /* Reserved / TCP Sum Offset */ + SK_U16 TcpSumSt; /* TCP Sum Start */ + SK_U16 TcpSumWr; /* TCP Sum Write */ + SK_U32 TcpReserved; /* not used */ + TXD *pNextTxd; /* Pointer to next Txd */ + struct sk_buff *pMBuf; /* Pointer to Linux' socket buffer */ +}; + + +/* definition of flags in descriptor control field */ +#define RX_CTRL_OWN_BMU UINT32_C(0x80000000) +#define RX_CTRL_STF UINT32_C(0x40000000) +#define RX_CTRL_EOF UINT32_C(0x20000000) +#define RX_CTRL_EOB_IRQ UINT32_C(0x10000000) +#define RX_CTRL_EOF_IRQ UINT32_C(0x08000000) +#define RX_CTRL_DEV_NULL UINT32_C(0x04000000) +#define RX_CTRL_STAT_VALID UINT32_C(0x02000000) +#define RX_CTRL_TIME_VALID UINT32_C(0x01000000) +#define RX_CTRL_CHECK_DEFAULT UINT32_C(0x00550000) +#define RX_CTRL_CHECK_CSUM UINT32_C(0x00560000) +#define RX_CTRL_LEN_MASK UINT32_C(0x0000FFFF) + +#define TX_CTRL_OWN_BMU UINT32_C(0x80000000) +#define TX_CTRL_STF UINT32_C(0x40000000) +#define TX_CTRL_EOF UINT32_C(0x20000000) +#define TX_CTRL_EOB_IRQ UINT32_C(0x10000000) +#define TX_CTRL_EOF_IRQ UINT32_C(0x08000000) +#define TX_CTRL_ST_FWD UINT32_C(0x04000000) +#define TX_CTRL_DISAB_CRC UINT32_C(0x02000000) +#define TX_CTRL_SOFTWARE UINT32_C(0x01000000) +#define TX_CTRL_CHECK_DEFAULT UINT32_C(0x00550000) +#define TX_CTRL_CHECK_CSUM UINT32_C(0x00560000) +#define TX_CTRL_LEN_MASK UINT32_C(0x0000FFFF) + + +/* The offsets of registers in the TX and RX queue control io area ***********/ + +#define RX_Q_BUF_CTRL_CNT 0x00 +#define RX_Q_NEXT_DESCR_LOW 0x04 +#define RX_Q_BUF_ADDR_LOW 0x08 +#define RX_Q_BUF_ADDR_HIGH 0x0c +#define RX_Q_FRAME_STAT 0x10 +#define RX_Q_TIME_STAMP 0x14 +#define RX_Q_CSUM_1_2 0x18 +#define RX_Q_CSUM_START_1_2 0x1c +#define RX_Q_CUR_DESCR_LOW 0x20 +#define RX_Q_DESCR_HIGH 0x24 +#define RX_Q_CUR_ADDR_LOW 0x28 +#define RX_Q_CUR_ADDR_HIGH 0x2c +#define RX_Q_CUR_BYTE_CNT 0x30 +#define RX_Q_CTRL 0x34 +#define RX_Q_FLAG 0x38 +#define RX_Q_TEST1 0x3c +#define RX_Q_TEST2 0x40 +#define RX_Q_TEST3 0x44 + +#define TX_Q_BUF_CTRL_CNT 0x00 +#define TX_Q_NEXT_DESCR_LOW 0x04 +#define TX_Q_BUF_ADDR_LOW 0x08 +#define TX_Q_BUF_ADDR_HIGH 0x0c +#define TX_Q_FRAME_STAT 0x10 +#define TX_Q_CSUM_START 0x14 +#define TX_Q_CSUM_START_POS 0x18 +#define TX_Q_RESERVED 0x1c +#define TX_Q_CUR_DESCR_LOW 0x20 +#define TX_Q_DESCR_HIGH 0x24 +#define TX_Q_CUR_ADDR_LOW 0x28 +#define TX_Q_CUR_ADDR_HIGH 0x2c +#define TX_Q_CUR_BYTE_CNT 0x30 +#define TX_Q_CTRL 0x34 +#define TX_Q_FLAG 0x38 +#define TX_Q_TEST1 0x3c +#define TX_Q_TEST2 0x40 +#define TX_Q_TEST3 0x44 + +/* definition of flags in the queue control field */ +#define RX_Q_CTRL_POLL_ON 0x00000080 +#define RX_Q_CTRL_POLL_OFF 0x00000040 +#define RX_Q_CTRL_STOP 0x00000020 +#define RX_Q_CTRL_START 0x00000010 +#define RX_Q_CTRL_CLR_I_PAR 0x00000008 +#define RX_Q_CTRL_CLR_I_EOB 0x00000004 +#define RX_Q_CTRL_CLR_I_EOF 0x00000002 +#define RX_Q_CTRL_CLR_I_ERR 0x00000001 + +#define TX_Q_CTRL_POLL_ON 0x00000080 +#define TX_Q_CTRL_POLL_OFF 0x00000040 +#define TX_Q_CTRL_STOP 0x00000020 +#define TX_Q_CTRL_START 0x00000010 +#define TX_Q_CTRL_CLR_I_EOB 0x00000004 +#define TX_Q_CTRL_CLR_I_EOF 0x00000002 +#define TX_Q_CTRL_CLR_I_ERR 0x00000001 + + +/* Interrupt bits in the interrupts source register **************************/ +#define IRQ_HW_ERROR 0x80000000 +#define IRQ_RESERVED 0x40000000 +#define IRQ_PKT_TOUT_RX1 0x20000000 +#define IRQ_PKT_TOUT_RX2 0x10000000 +#define IRQ_PKT_TOUT_TX1 0x08000000 +#define IRQ_PKT_TOUT_TX2 0x04000000 +#define IRQ_I2C_READY 0x02000000 +#define IRQ_SW 0x01000000 +#define IRQ_EXTERNAL_REG 0x00800000 +#define IRQ_TIMER 0x00400000 +#define IRQ_MAC1 0x00200000 +#define IRQ_LINK_SYNC_C_M1 0x00100000 +#define IRQ_MAC2 0x00080000 +#define IRQ_LINK_SYNC_C_M2 0x00040000 +#define IRQ_EOB_RX1 0x00020000 +#define IRQ_EOF_RX1 0x00010000 +#define IRQ_CHK_RX1 0x00008000 +#define IRQ_EOB_RX2 0x00004000 +#define IRQ_EOF_RX2 0x00002000 +#define IRQ_CHK_RX2 0x00001000 +#define IRQ_EOB_SY_TX1 0x00000800 +#define IRQ_EOF_SY_TX1 0x00000400 +#define IRQ_CHK_SY_TX1 0x00000200 +#define IRQ_EOB_AS_TX1 0x00000100 +#define IRQ_EOF_AS_TX1 0x00000080 +#define IRQ_CHK_AS_TX1 0x00000040 +#define IRQ_EOB_SY_TX2 0x00000020 +#define IRQ_EOF_SY_TX2 0x00000010 +#define IRQ_CHK_SY_TX2 0x00000008 +#define IRQ_EOB_AS_TX2 0x00000004 +#define IRQ_EOF_AS_TX2 0x00000002 +#define IRQ_CHK_AS_TX2 0x00000001 + +#define DRIVER_IRQS (IRQ_SW | IRQ_EOF_RX1 | IRQ_EOF_RX2 | \ + IRQ_EOF_SY_TX1 | IRQ_EOF_AS_TX1 | \ + IRQ_EOF_SY_TX2 | IRQ_EOF_AS_TX2) + +#define SPECIAL_IRQS (IRQ_HW_ERROR | IRQ_PKT_TOUT_RX1 | IRQ_PKT_TOUT_RX2 | \ + IRQ_PKT_TOUT_TX1 | IRQ_PKT_TOUT_TX2 | \ + IRQ_I2C_READY | IRQ_EXTERNAL_REG | IRQ_TIMER | \ + IRQ_MAC1 | IRQ_LINK_SYNC_C_M1 | \ + IRQ_MAC2 | IRQ_LINK_SYNC_C_M2 | \ + IRQ_CHK_RX1 | IRQ_CHK_RX2 | \ + IRQ_CHK_SY_TX1 | IRQ_CHK_AS_TX1 | \ + IRQ_CHK_SY_TX2 | IRQ_CHK_AS_TX2) + +#define IRQ_MASK (IRQ_SW | IRQ_EOB_RX1 | IRQ_EOF_RX1 | \ + IRQ_EOB_RX2 | IRQ_EOF_RX2 | \ + IRQ_EOB_SY_TX1 | IRQ_EOF_SY_TX1 | \ + IRQ_EOB_AS_TX1 | IRQ_EOF_AS_TX1 | \ + IRQ_EOB_SY_TX2 | IRQ_EOF_SY_TX2 | \ + IRQ_EOB_AS_TX2 | IRQ_EOF_AS_TX2 | \ + IRQ_HW_ERROR | IRQ_PKT_TOUT_RX1 | IRQ_PKT_TOUT_RX2 | \ + IRQ_PKT_TOUT_TX1 | IRQ_PKT_TOUT_TX2 | \ + IRQ_I2C_READY | IRQ_EXTERNAL_REG | IRQ_TIMER | \ + IRQ_MAC1 | \ + IRQ_MAC2 | \ + IRQ_CHK_RX1 | IRQ_CHK_RX2 | \ + IRQ_CHK_SY_TX1 | IRQ_CHK_AS_TX1 | \ + IRQ_CHK_SY_TX2 | IRQ_CHK_AS_TX2) + +#define IRQ_HWE_MASK 0x00000FFF /* enable all HW irqs */ + +typedef struct s_DevNet DEV_NET; + +struct s_DevNet { + int PortNr; + int NetNr; + int Mtu; + int Up; + SK_AC *pAC; +}; + +typedef struct s_TxPort TX_PORT; + +struct s_TxPort { + /* the transmit descriptor rings */ + caddr_t pTxDescrRing; /* descriptor area memory */ + SK_U64 VTxDescrRing; /* descr. area bus virt. addr. */ + TXD *pTxdRingHead; /* Head of Tx rings */ + TXD *pTxdRingTail; /* Tail of Tx rings */ + TXD *pTxdRingPrev; /* descriptor sent previously */ + int TxdRingFree; /* # of free entrys */ +#if 0 + spinlock_t TxDesRingLock; /* serialize descriptor accesses */ +#endif + caddr_t HwAddr; /* bmu registers address */ + int PortIndex; /* index number of port (0 or 1) */ +}; + +typedef struct s_RxPort RX_PORT; + +struct s_RxPort { + /* the receive descriptor rings */ + caddr_t pRxDescrRing; /* descriptor area memory */ + SK_U64 VRxDescrRing; /* descr. area bus virt. addr. */ + RXD *pRxdRingHead; /* Head of Rx rings */ + RXD *pRxdRingTail; /* Tail of Rx rings */ + RXD *pRxdRingPrev; /* descriptor given to BMU previously */ + int RxdRingFree; /* # of free entrys */ +#if 0 + spinlock_t RxDesRingLock; /* serialize descriptor accesses */ +#endif + int RxFillLimit; /* limit for buffers in ring */ + caddr_t HwAddr; /* bmu registers address */ + int PortIndex; /* index number of port (0 or 1) */ +}; + +typedef struct s_PerStrm PER_STRM; + +#define SK_ALLOC_IRQ 0x00000001 + +/**************************************************************************** + * Per board structure / Adapter Context structure: + * Allocated within attach(9e) and freed within detach(9e). + * Contains all 'per device' necessary handles, flags, locks etc.: + */ +struct s_AC { + SK_GEINIT GIni; /* GE init struct */ + SK_PNMI Pnmi; /* PNMI data struct */ + SK_VPD vpd; /* vpd data struct */ + SK_QUEUE Event; /* Event queue */ + SK_HWT Hwt; /* Hardware Timer control struct */ + SK_TIMCTRL Tim; /* Software Timer control struct */ + SK_I2C I2c; /* I2C relevant data structure */ + SK_ADDR Addr; /* for Address module */ + SK_CSUM Csum; /* for checksum module */ + SK_RLMT Rlmt; /* for rlmt module */ +#if 0 + spinlock_t SlowPathLock; /* Normal IRQ lock */ +#endif + SK_PNMI_STRUCT_DATA PnmiStruct; /* structure to get all Pnmi-Data */ + int RlmtMode; /* link check mode to set */ + int RlmtNets; /* Number of nets */ + + SK_IOC IoBase; /* register set of adapter */ + int BoardLevel; /* level of active hw init (0-2) */ + char DeviceStr[80]; /* adapter string from vpd */ + SK_U32 AllocFlag; /* flag allocation of resources */ +#if 0 + struct pci_dev *PciDev; /* for access to pci config space */ + SK_U32 PciDevId; /* pci device id */ +#else + int PciDev; +#endif + struct SK_NET_DEVICE *dev[2]; /* pointer to device struct */ + char Name[30]; /* driver name */ + struct SK_NET_DEVICE *Next; /* link all devices (for clearing) */ + int RxBufSize; /* length of receive buffers */ +#if 0 + struct net_device_stats stats; /* linux 'netstat -i' statistics */ +#endif + int Index; /* internal board index number */ + + /* adapter RAM sizes for queues of active port */ + int RxQueueSize; /* memory used for receive queue */ + int TxSQueueSize; /* memory used for sync. tx queue */ + int TxAQueueSize; /* memory used for async. tx queue */ + + int PromiscCount; /* promiscuous mode counter */ + int AllMultiCount; /* allmulticast mode counter */ + int MulticCount; /* number of different MC */ + /* addresses for this board */ + /* (may be more than HW can)*/ + + int HWRevision; /* Hardware revision */ + int ActivePort; /* the active XMAC port */ + int MaxPorts; /* number of activated ports */ + int TxDescrPerRing; /* # of descriptors per tx ring */ + int RxDescrPerRing; /* # of descriptors per rx ring */ + + caddr_t pDescrMem; /* Pointer to the descriptor area */ + dma_addr_t pDescrMemDMA; /* PCI DMA address of area */ + + /* the port structures with descriptor rings */ + TX_PORT TxPort[SK_MAX_MACS][2]; + RX_PORT RxPort[SK_MAX_MACS]; + + unsigned int CsOfs1; /* for checksum calculation */ + unsigned int CsOfs2; /* for checksum calculation */ + SK_U32 CsOfs; /* for checksum calculation */ + + SK_BOOL CheckQueue; /* check event queue soon */ + + /* Only for tests */ + int PortUp; + int PortDown; + +}; + +#endif /* __INC_SKDRV2ND_H */ diff --git a/drivers/net/sk98lin/h/skerror.h b/drivers/net/sk98lin/h/skerror.h new file mode 100644 index 0000000000..a454d9daa9 --- /dev/null +++ b/drivers/net/sk98lin/h/skerror.h @@ -0,0 +1,80 @@ +/****************************************************************************** + * + * Name: skerror.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.5 $ + * Date: $Date: 2002/04/25 11:05:10 $ + * Purpose: SK specific Error log support + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * History: + * $Log: skerror.h,v $ + * Revision 1.5 2002/04/25 11:05:10 rschmidt + * Editorial changes + * + * Revision 1.4 1999/11/22 13:51:59 cgoos + * Changed license header to GPL. + * + * Revision 1.3 1999/09/14 14:04:42 rwahl + * Added error base SK_ERRBASE_PECP. + * Changed error base for driver. + * + * Revision 1.2 1998/08/11 11:15:41 gklug + * chg: comments + * + * Revision 1.1 1998/08/11 11:09:38 gklug + * add: error bases + * add: error Classes + * first version + * + * + * + ******************************************************************************/ + +#ifndef _INC_SKERROR_H_ +#define _INC_SKERROR_H_ + +/* + * Define Error Classes + */ +#define SK_ERRCL_OTHER (0) /* Other error */ +#define SK_ERRCL_CONFIG (1L<<0) /* Configuration error */ +#define SK_ERRCL_INIT (1L<<1) /* Initialization error */ +#define SK_ERRCL_NORES (1L<<2) /* Out of Resources error */ +#define SK_ERRCL_SW (1L<<3) /* Internal Software error */ +#define SK_ERRCL_HW (1L<<4) /* Hardware Failure */ +#define SK_ERRCL_COMM (1L<<5) /* Communication error */ + + +/* + * Define Error Code Bases + */ +#define SK_ERRBASE_RLMT 100 /* Base Error number for RLMT */ +#define SK_ERRBASE_HWINIT 200 /* Base Error number for HWInit */ +#define SK_ERRBASE_VPD 300 /* Base Error number for VPD */ +#define SK_ERRBASE_PNMI 400 /* Base Error number for PNMI */ +#define SK_ERRBASE_CSUM 500 /* Base Error number for Checksum */ +#define SK_ERRBASE_SIRQ 600 /* Base Error number for Special IRQ */ +#define SK_ERRBASE_I2C 700 /* Base Error number for I2C module */ +#define SK_ERRBASE_QUEUE 800 /* Base Error number for Scheduler */ +#define SK_ERRBASE_ADDR 900 /* Base Error number for Address module */ +#define SK_ERRBASE_PECP 1000 /* Base Error number for PECP */ +#define SK_ERRBASE_DRV 1100 /* Base Error number for Driver */ + +#endif /* _INC_SKERROR_H_ */ diff --git a/drivers/net/sk98lin/h/skgedrv.h b/drivers/net/sk98lin/h/skgedrv.h new file mode 100644 index 0000000000..72ba9ce198 --- /dev/null +++ b/drivers/net/sk98lin/h/skgedrv.h @@ -0,0 +1,72 @@ +/****************************************************************************** + * + * Name: skgedrv.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.6 $ + * Date: $Date: 2002/07/15 15:38:01 $ + * Purpose: Interface with the driver + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * History: + * + * $Log: skgedrv.h,v $ + * Revision 1.6 2002/07/15 15:38:01 rschmidt + * Power Management support + * Editorial changes + * + * Revision 1.5 2002/04/25 11:05:47 rschmidt + * Editorial changes + * + * Revision 1.4 1999/11/22 13:52:46 cgoos + * Changed license header to GPL. + * + * Revision 1.3 1998/12/01 13:31:39 cgoos + * SWITCH INTERN Event added. + * + * Revision 1.2 1998/11/25 08:28:38 gklug + * rmv: PORT SWITCH Event + * + * Revision 1.1 1998/09/29 06:14:07 gklug + * add: driver events (initial version) + * + * + ******************************************************************************/ + +#ifndef __INC_SKGEDRV_H_ +#define __INC_SKGEDRV_H_ + +/* defines ********************************************************************/ + +/* + * Define the driver events. + * Usually the events are defined by the destination module. + * In case of the driver we put the definition of the events here. + */ +#define SK_DRV_PORT_RESET 1 /* The port needs to be reset */ +#define SK_DRV_NET_UP 2 /* The net is operational */ +#define SK_DRV_NET_DOWN 3 /* The net is down */ +#define SK_DRV_SWITCH_SOFT 4 /* Ports switch with both links connected */ +#define SK_DRV_SWITCH_HARD 5 /* Port switch due to link failure */ +#define SK_DRV_RLMT_SEND 6 /* Send a RLMT packet */ +#define SK_DRV_ADAP_FAIL 7 /* The whole adapter fails */ +#define SK_DRV_PORT_FAIL 8 /* One port fails */ +#define SK_DRV_SWITCH_INTERN 9 /* Port switch by the driver itself */ +#define SK_DRV_POWER_DOWN 10 /* Power down mode */ + +#endif /* __INC_SKGEDRV_H_ */ diff --git a/drivers/net/sk98lin/h/skgehw.h b/drivers/net/sk98lin/h/skgehw.h new file mode 100644 index 0000000000..2c98427675 --- /dev/null +++ b/drivers/net/sk98lin/h/skgehw.h @@ -0,0 +1,2336 @@ +/****************************************************************************** + * + * Name: skgehw.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.49 $ + * Date: $Date: 2003/01/28 09:43:49 $ + * Purpose: Defines and Macros for the Gigabit Ethernet Adapter Product Family + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2003 SysKonnect GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * History: + * $Log: skgehw.h,v $ + * Revision 1.49 2003/01/28 09:43:49 rschmidt + * Added defines for PCI-Spec. 2.3 IRQ + * Added defines for CLK_RUN (YUKON-Lite) + * Editorial changes + * + * Revision 1.48 2002/12/05 10:25:11 rschmidt + * Added defines for Half Duplex Burst Mode On/Off + * Added defines for Rx GMAC FIFO Flush feature + * Editorial changes + * + * Revision 1.47 2002/11/12 17:01:31 rschmidt + * Added defines for WOL_CTL_DEFAULT + * Editorial changes + * + * Revision 1.46 2002/10/14 14:47:57 rschmidt + * Corrected bit mask for HW self test results + * Added defines for WOL Registers + * Editorial changes + * + * Revision 1.45 2002/10/11 09:25:22 mkarl + * Added bit mask for HW self test results. + * + * Revision 1.44 2002/08/16 14:44:36 rschmidt + * Added define GPC_HWCFG_GMII_FIB for YUKON Fiber + * + * Revision 1.43 2002/08/12 13:31:50 rschmidt + * Corrected macros for GMAC Address Registers: GM_INADDR(), + * GM_OUTADDR(), GM_INHASH, GM_OUTHASH. + * Editorial changes + * + * Revision 1.42 2002/08/08 15:37:56 rschmidt + * Added defines for Power Management Capabilities + * Editorial changes + * + * Revision 1.41 2002/07/23 16:02:25 rschmidt + * Added macro WOL_REG() to access WOL reg. (HW-Bug in YUKON 1st rev.) + * + * Revision 1.40 2002/07/15 15:41:37 rschmidt + * Added new defines for Power Management Cap. & Control + * Editorial changes + * + * Revision 1.39 2002/06/10 09:37:07 rschmidt + * Added macros for the ADDR-Modul + * + * Revision 1.38 2002/06/05 08:15:19 rschmidt + * Added defines for WOL Registers + * Editorial changes + * + * Revision 1.37 2002/04/25 11:39:23 rschmidt + * Added new defines for PCI Our Register 1 + * Added new registers and defines for YUKON (Rx FIFO, Tx FIFO, + * Time Stamp Timer, GMAC Control, GPHY Control,Link Control, + * GMAC IRQ Source and Mask, Wake-up Frame Pattern Match); + * Added new defines for Control/Status (VAUX available) + * Added Chip ID for YUKON + * Added define for descriptors with UDP ext. for YUKON + * Added macros to access the GMAC + * Added new Phy Type for Marvell 88E1011S (GPHY) + * Editorial changes + * + * Revision 1.36 2000/11/09 12:32:49 rassmann + * Renamed variables. + * + * Revision 1.35 2000/05/19 10:17:13 cgoos + * Added inactivity check in PHY_READ (in DEBUG mode only). + * + * Revision 1.34 1999/11/22 13:53:40 cgoos + * Changed license header to GPL. + * + * Revision 1.33 1999/08/27 11:17:10 malthoff + * It's more savely to put brackets around macro parameters. + * Brackets added for PHY_READ and PHY_WRITE. + * + * Revision 1.32 1999/05/19 07:31:01 cgoos + * Changes for 1000Base-T. + * Added HWAC_LINK_LED macro. + * + * Revision 1.31 1999/03/12 13:27:40 malthoff + * Remove __STDC__. + * + * Revision 1.30 1999/02/09 09:28:20 malthoff + * Add PCI_ERRBITS. + * + * Revision 1.29 1999/01/26 08:55:48 malthoff + * Bugfix: The 16 bit field relations inside the descriptor are + * endianess dependend if the descriptor reversal feature + * (PCI_REV_DESC bit in PCI_OUR_REG_2) is enabled. + * Drivers which use this feature has to set the define + * SK_USE_REV_DESC. + * + * Revision 1.28 1998/12/10 11:10:22 malthoff + * bug fix: IS_IRQ_STAT and IS_IRQ_MST_ERR has been twisted. + * + * Revision 1.27 1998/11/13 14:19:21 malthoff + * Bug Fix: The bit definition of B3_PA_CTRL has completely + * changed from HW Spec v1.3 to v1.5. + * + * Revision 1.26 1998/11/04 08:31:48 cgoos + * Fixed byte ordering in XM_OUTADDR/XM_OUTHASH macros. + * + * Revision 1.25 1998/11/04 07:16:25 cgoos + * Changed byte ordering in XM_INADDR/XM_INHASH again. + * + * Revision 1.24 1998/11/02 11:08:43 malthoff + * RxCtrl and TxCtrl must be volatile. + * + * Revision 1.23 1998/10/28 13:50:45 malthoff + * Fix: Endian support missing in XM_IN/OUT-ADDR/HASH macros. + * + * Revision 1.22 1998/10/26 08:01:36 malthoff + * RX_MFF_CTRL1 is split up into RX_MFF_CTRL1, + * RX_MFF_STAT_TO, and RX_MFF_TIST_TO. + * TX_MFF_CTRL1 is split up TX_MFF_CTRL1 and TX_MFF_WAF. + * + * Revision 1.21 1998/10/20 07:43:10 malthoff + * Fix: XM_IN/OUT/ADDR/HASH macros: + * The pointer must be casted. + * + * Revision 1.20 1998/10/19 15:53:59 malthoff + * Remove ML proto definitions. + * + * Revision 1.19 1998/10/16 14:40:17 gklug + * fix: typo B0_XM_IMSK regs + * + * Revision 1.18 1998/10/16 09:46:54 malthoff + * Remove temp defines for ML diag prototype. + * Fix register definition for B0_XM1_PHY_DATA, B0_XM1_PHY_DATA + * B0_XM2_PHY_DATA, B0_XM2_PHY_ADDR, B0_XA1_CSR, B0_XS1_CSR, + * B0_XS2_CSR, and B0_XA2_CSR. + * + * Revision 1.17 1998/10/14 06:03:14 cgoos + * Changed shifted constant to ULONG. + * + * Revision 1.16 1998/10/09 07:05:41 malthoff + * Rename ALL_PA_ENA_TO to PA_ENA_TO_ALL. + * + * Revision 1.15 1998/10/05 07:54:23 malthoff + * Split up RB_CTRL and it's bit definition into + * RB_CTRL, RB_TST1, and RB_TST2. + * Rename RB_RX_HTPP to RB_RX_LTPP. + * Add ALL_PA_ENA_TO. Modify F_WATER_MARK + * according to HW Spec. v1.5. + * Add MFF_TX_CTRL_DEF. + * + * Revision 1.14 1998/09/28 13:31:16 malthoff + * bug fix: B2_MAC_3 is 0x110 not 0x114 + * + * Revision 1.13 1998/09/24 14:42:56 malthoff + * Split the RX_MFF_TST into RX_MFF_CTRL2, + * RX_MFF_TST1, and RX_MFF_TST2. + * Rename RX_MFF_CTRL to RX_MFF_CTRL1. + * Add BMU bit CSR_SV_IDLE. + * Add macros PHY_READ() and PHY_WRITE(). + * Rename macro SK_ADDR() to SK_HW_ADDR() + * because of conflicts with the Address Module. + * + * Revision 1.12 1998/09/16 07:25:33 malthoff + * Change the parameter order in the XM_INxx and XM_OUTxx macros, + * to have the IoC as first parameter. + * + * Revision 1.11 1998/09/03 09:58:41 malthoff + * Rework the XM_xxx macros. Use {} instead of () to + * be compatible with SK_xxx macros which are defined + * with {}. + * + * Revision 1.10 1998/09/02 11:16:39 malthoff + * Temporary modify B2_I2C_SW to make tests with + * the GE/ML prototype. + * + * Revision 1.9 1998/08/19 09:11:49 gklug + * fix: struct are removed from c-source (see CCC) + * add: typedefs for all structs + * + * Revision 1.8 1998/08/18 08:27:27 malthoff + * Add some temporary workarounds to test GE + * sources with the ML. + * + * Revision 1.7 1998/07/03 14:42:26 malthoff + * bug fix: Correct macro XMA(). + * Add temporary workaround to access the PCI config space over I/O + * + * Revision 1.6 1998/06/23 11:30:36 malthoff + * Remove ';' with ',' in macors. + * + * Revision 1.5 1998/06/22 14:20:57 malthoff + * Add macro SK_ADDR(Base,Addr). + * + * Revision 1.4 1998/06/19 13:35:43 malthoff + * change 'pGec' with 'pAC' + * + * Revision 1.3 1998/06/17 14:58:16 cvs + * Lost keywords reinserted. + * + * Revision 1.1 1998/06/17 14:16:36 cvs + * created + * + * + ******************************************************************************/ + +#ifndef __INC_SKGEHW_H +#define __INC_SKGEHW_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* defines ********************************************************************/ + +#define BIT_31 (1UL << 31) +#define BIT_30 (1L << 30) +#define BIT_29 (1L << 29) +#define BIT_28 (1L << 28) +#define BIT_27 (1L << 27) +#define BIT_26 (1L << 26) +#define BIT_25 (1L << 25) +#define BIT_24 (1L << 24) +#define BIT_23 (1L << 23) +#define BIT_22 (1L << 22) +#define BIT_21 (1L << 21) +#define BIT_20 (1L << 20) +#define BIT_19 (1L << 19) +#define BIT_18 (1L << 18) +#define BIT_17 (1L << 17) +#define BIT_16 (1L << 16) +#define BIT_15 (1L << 15) +#define BIT_14 (1L << 14) +#define BIT_13 (1L << 13) +#define BIT_12 (1L << 12) +#define BIT_11 (1L << 11) +#define BIT_10 (1L << 10) +#define BIT_9 (1L << 9) +#define BIT_8 (1L << 8) +#define BIT_7 (1L << 7) +#define BIT_6 (1L << 6) +#define BIT_5 (1L << 5) +#define BIT_4 (1L << 4) +#define BIT_3 (1L << 3) +#define BIT_2 (1L << 2) +#define BIT_1 (1L << 1) +#define BIT_0 1L + +#define BIT_15S (1U << 15) +#define BIT_14S (1 << 14) +#define BIT_13S (1 << 13) +#define BIT_12S (1 << 12) +#define BIT_11S (1 << 11) +#define BIT_10S (1 << 10) +#define BIT_9S (1 << 9) +#define BIT_8S (1 << 8) +#define BIT_7S (1 << 7) +#define BIT_6S (1 << 6) +#define BIT_5S (1 << 5) +#define BIT_4S (1 << 4) +#define BIT_3S (1 << 3) +#define BIT_2S (1 << 2) +#define BIT_1S (1 << 1) +#define BIT_0S 1 + +#define SHIFT31(x) ((x) << 31) +#define SHIFT30(x) ((x) << 30) +#define SHIFT29(x) ((x) << 29) +#define SHIFT28(x) ((x) << 28) +#define SHIFT27(x) ((x) << 27) +#define SHIFT26(x) ((x) << 26) +#define SHIFT25(x) ((x) << 25) +#define SHIFT24(x) ((x) << 24) +#define SHIFT23(x) ((x) << 23) +#define SHIFT22(x) ((x) << 22) +#define SHIFT21(x) ((x) << 21) +#define SHIFT20(x) ((x) << 20) +#define SHIFT19(x) ((x) << 19) +#define SHIFT18(x) ((x) << 18) +#define SHIFT17(x) ((x) << 17) +#define SHIFT16(x) ((x) << 16) +#define SHIFT15(x) ((x) << 15) +#define SHIFT14(x) ((x) << 14) +#define SHIFT13(x) ((x) << 13) +#define SHIFT12(x) ((x) << 12) +#define SHIFT11(x) ((x) << 11) +#define SHIFT10(x) ((x) << 10) +#define SHIFT9(x) ((x) << 9) +#define SHIFT8(x) ((x) << 8) +#define SHIFT7(x) ((x) << 7) +#define SHIFT6(x) ((x) << 6) +#define SHIFT5(x) ((x) << 5) +#define SHIFT4(x) ((x) << 4) +#define SHIFT3(x) ((x) << 3) +#define SHIFT2(x) ((x) << 2) +#define SHIFT1(x) ((x) << 1) +#define SHIFT0(x) ((x) << 0) + +/* + * Configuration Space header + * Since this module is used for different OS', those may be + * duplicate on some of them (e.g. Linux). But to keep the + * common source, we have to live with this... + */ +#define PCI_VENDOR_ID 0x00 /* 16 bit Vendor ID */ +#define PCI_DEVICE_ID 0x02 /* 16 bit Device ID */ +#define PCI_COMMAND 0x04 /* 16 bit Command */ +#define PCI_STATUS 0x06 /* 16 bit Status */ +#define PCI_REV_ID 0x08 /* 8 bit Revision ID */ +#if 0 +#define PCI_CLASS_CODE 0x09 /* 24 bit Class Code */ +#endif +#define PCI_CACHE_LSZ 0x0c /* 8 bit Cache Line Size */ +#define PCI_LAT_TIM 0x0d /* 8 bit Latency Timer */ +#define PCI_HEADER_T 0x0e /* 8 bit Header Type */ +#define PCI_BIST 0x0f /* 8 bit Built-in selftest */ +#define PCI_BASE_1ST 0x10 /* 32 bit 1st Base address */ +#define PCI_BASE_2ND 0x14 /* 32 bit 2nd Base address */ + /* Byte 0x18..0x2b: reserved */ +#define PCI_SUB_VID 0x2c /* 16 bit Subsystem Vendor ID */ +#define PCI_SUB_ID 0x2e /* 16 bit Subsystem ID */ +#define PCI_BASE_ROM 0x30 /* 32 bit Expansion ROM Base Address */ +#define PCI_CAP_PTR 0x34 /* 8 bit Capabilities Ptr */ + /* Byte 35..3b: reserved */ +#define PCI_IRQ_LINE 0x3c /* 8 bit Interrupt Line */ +#define PCI_IRQ_PIN 0x3d /* 8 bit Interrupt Pin */ +#define PCI_MIN_GNT 0x3e /* 8 bit Min_Gnt */ +#define PCI_MAX_LAT 0x3f /* 8 bit Max_Lat */ + /* Device Dependent Region */ +#define PCI_OUR_REG_1 0x40 /* 32 bit Our Register 1 */ +#define PCI_OUR_REG_2 0x44 /* 32 bit Our Register 2 */ + /* Power Management Region */ +#define PCI_PM_CAP_ID 0x48 /* 8 bit Power Management Cap. ID */ +#define PCI_PM_NITEM 0x49 /* 8 bit Next Item Ptr */ +#define PCI_PM_CAP_REG 0x4a /* 16 bit Power Management Capabilities */ +#define PCI_PM_CTL_STS 0x4c /* 16 bit Power Manag. Control/Status */ + /* Byte 0x4e: reserved */ +#define PCI_PM_DAT_REG 0x4f /* 8 bit Power Manag. Data Register */ + /* VPD Region */ +#define PCI_VPD_CAP_ID 0x50 /* 8 bit VPD Cap. ID */ +#define PCI_VPD_NITEM 0x51 /* 8 bit Next Item Ptr */ +#define PCI_VPD_ADR_REG 0x52 /* 16 bit VPD Address Register */ +#define PCI_VPD_DAT_REG 0x54 /* 32 bit VPD Data Register */ + /* Byte 0x58..0xff: reserved */ + +/* + * I2C Address (PCI Config) + * + * Note: The temperature and voltage sensors are relocated on a different + * I2C bus. + */ +#define I2C_ADDR_VPD 0xA0 /* I2C address for the VPD EEPROM */ + +/* + * Define Bits and Values of the registers + */ +/* PCI_COMMAND 16 bit Command */ + /* Bit 15..11: reserved */ +#define PCI_INT_DIS BIT_10S /* Interrupt INTx# disable (PCI 2.3) */ +#define PCI_FBTEN BIT_9S /* Fast Back-To-Back enable */ +#define PCI_SERREN BIT_8S /* SERR enable */ +#define PCI_ADSTEP BIT_7S /* Address Stepping */ +#define PCI_PERREN BIT_6S /* Parity Report Response enable */ +#define PCI_VGA_SNOOP BIT_5S /* VGA palette snoop */ +#define PCI_MWIEN BIT_4S /* Memory write an inv cycl ena */ +#define PCI_SCYCEN BIT_3S /* Special Cycle enable */ +#define PCI_BMEN BIT_2S /* Bus Master enable */ +#define PCI_MEMEN BIT_1S /* Memory Space Access enable */ +#define PCI_IOEN BIT_0S /* I/O Space Access enable */ + +#define PCI_COMMAND_VAL (PCI_FBTEN | PCI_SERREN | PCI_PERREN | PCI_MWIEN |\ + PCI_BMEN | PCI_MEMEN | PCI_IOEN) + +/* PCI_STATUS 16 bit Status */ +#define PCI_PERR BIT_15S /* Parity Error */ +#define PCI_SERR BIT_14S /* Signaled SERR */ +#define PCI_RMABORT BIT_13S /* Received Master Abort */ +#define PCI_RTABORT BIT_12S /* Received Target Abort */ + /* Bit 11: reserved */ +#define PCI_DEVSEL (3<<9) /* Bit 10.. 9: DEVSEL Timing */ +#define PCI_DEV_FAST (0<<9) /* fast */ +#define PCI_DEV_MEDIUM (1<<9) /* medium */ +#define PCI_DEV_SLOW (2<<9) /* slow */ +#define PCI_DATAPERR BIT_8S /* DATA Parity error detected */ +#define PCI_FB2BCAP BIT_7S /* Fast Back-to-Back Capability */ +#define PCI_UDF BIT_6S /* User Defined Features */ +#define PCI_66MHZCAP BIT_5S /* 66 MHz PCI bus clock capable */ +#define PCI_NEWCAP BIT_4S /* New cap. list implemented */ +#define PCI_INT_STAT BIT_3S /* Interrupt INTx# Status (PCI 2.3) */ + /* Bit 2.. 0: reserved */ + +#define PCI_ERRBITS (PCI_PERR | PCI_SERR | PCI_RMABORT | PCI_RTABORT |\ + PCI_DATAPERR) + +/* PCI_CLASS_CODE 24 bit Class Code */ +/* Byte 2: Base Class (02) */ +/* Byte 1: SubClass (00) */ +/* Byte 0: Programming Interface (00) */ + +/* PCI_CACHE_LSZ 8 bit Cache Line Size */ +/* Possible values: 0,2,4,8,16,32,64,128 */ + +/* PCI_HEADER_T 8 bit Header Type */ +#define PCI_HD_MF_DEV BIT_7S /* 0= single, 1= multi-func dev */ +#define PCI_HD_TYPE 0x7f /* Bit 6..0: Header Layout 0= normal */ + +/* PCI_BIST 8 bit Built-in selftest */ +/* Built-in Self test not supported (optional) */ + +/* PCI_BASE_1ST 32 bit 1st Base address */ +#define PCI_MEMSIZE 0x4000L /* use 16 kB Memory Base */ +#define PCI_MEMBASE_MSK 0xffffc000L /* Bit 31..14: Memory Base Address */ +#define PCI_MEMSIZE_MSK 0x00003ff0L /* Bit 13.. 4: Memory Size Req. */ +#define PCI_PREFEN BIT_3 /* Prefetchable */ +#define PCI_MEM_TYP (3L<<2) /* Bit 2.. 1: Memory Type */ +#define PCI_MEM32BIT (0L<<1) /* Base addr anywhere in 32 Bit range */ +#define PCI_MEM1M (1L<<1) /* Base addr below 1 MegaByte */ +#define PCI_MEM64BIT (2L<<1) /* Base addr anywhere in 64 Bit range */ +#define PCI_MEMSPACE BIT_0 /* Memory Space Indic. */ + +/* PCI_BASE_2ND 32 bit 2nd Base address */ +#define PCI_IOBASE 0xffffff00L /* Bit 31.. 8: I/O Base address */ +#define PCI_IOSIZE 0x000000fcL /* Bit 7.. 2: I/O Size Requirements */ + /* Bit 1: reserved */ +#define PCI_IOSPACE BIT_0 /* I/O Space Indicator */ + +/* PCI_BASE_ROM 32 bit Expansion ROM Base Address */ +#define PCI_ROMBASE 0xfffe0000L /* Bit 31..17: ROM BASE address (1st)*/ +#define PCI_ROMBASZ (0x1cL<<14) /* Bit 16..14: Treat as BASE or SIZE */ +#define PCI_ROMSIZE (0x38L<<11) /* Bit 13..11: ROM Size Requirements */ + /* Bit 10.. 1: reserved */ +#define PCI_ROMEN BIT_0 /* Address Decode enable */ + +/* Device Dependent Region */ +/* PCI_OUR_REG_1 32 bit Our Register 1 */ + /* Bit 31..29: reserved */ +#define PCI_PHY_COMA BIT_28 /* Set PHY to Coma Mode */ +#define PCI_EN_CAL BIT_27 /* Enable PCI buffer strength calibr. */ +#define PCI_DIS_CAL BIT_26 /* Disable PCI buffer strength calibr. */ +#define PCI_VIO BIT_25 /* PCI I/O Voltage, 0 = 3.3V, 1 = 5V */ +#define PCI_DIS_BOOT BIT_24 /* Disable BOOT via ROM */ +#define PCI_EN_IO BIT_23 /* Mapping to I/O space */ +#define PCI_EN_FPROM BIT_22 /* Enable FLASH mapping to memory */ + /* 1 = Map Flash to memory */ + /* 0 = Disable addr. dec */ +#define PCI_PAGESIZE (3L<<20) /* Bit 21..20: FLASH Page Size */ +#define PCI_PAGE_16 (0L<<20) /* 16 k pages */ +#define PCI_PAGE_32K (1L<<20) /* 32 k pages */ +#define PCI_PAGE_64K (2L<<20) /* 64 k pages */ +#define PCI_PAGE_128K (3L<<20) /* 128 k pages */ + /* Bit 19: reserved */ +#define PCI_PAGEREG (7L<<16) /* Bit 18..16: Page Register */ +#define PCI_NOTAR BIT_15 /* No turnaround cycle */ +#define PCI_FORCE_BE BIT_14 /* Assert all BEs on MR */ +#define PCI_DIS_MRL BIT_13 /* Disable Mem Read Line */ +#define PCI_DIS_MRM BIT_12 /* Disable Mem Read Multiple */ +#define PCI_DIS_MWI BIT_11 /* Disable Mem Write & Invalidate */ +#define PCI_DISC_CLS BIT_10 /* Disc: cacheLsz bound */ +#define PCI_BURST_DIS BIT_9 /* Burst Disable */ +#define PCI_DIS_PCI_CLK BIT_8 /* Disable PCI clock driving */ +#define PCI_SKEW_DAS (0xfL<<4) /* Bit 7.. 4: Skew Ctrl, DAS Ext */ +#define PCI_SKEW_BASE 0xfL /* Bit 3.. 0: Skew Ctrl, Base */ + + +/* PCI_OUR_REG_2 32 bit Our Register 2 */ +#define PCI_VPD_WR_THR (0xffL<<24) /* Bit 31..24: VPD Write Threshold */ +#define PCI_DEV_SEL (0x7fL<<17) /* Bit 23..17: EEPROM Device Select */ +#define PCI_VPD_ROM_SZ (7L<<14) /* Bit 16..14: VPD ROM Size */ + /* Bit 13..12: reserved */ +#define PCI_PATCH_DIR (0xfL<<8) /* Bit 11.. 8: Ext Patches dir 3..0 */ +#define PCI_PATCH_DIR_3 BIT_11 +#define PCI_PATCH_DIR_2 BIT_10 +#define PCI_PATCH_DIR_1 BIT_9 +#define PCI_PATCH_DIR_0 BIT_8 +#define PCI_EXT_PATCHS (0xfL<<4) /* Bit 7.. 4: Extended Patches 3..0 */ +#define PCI_EXT_PATCH_3 BIT_7 +#define PCI_EXT_PATCH_2 BIT_6 +#define PCI_EXT_PATCH_1 BIT_5 +#define PCI_EXT_PATCH_0 BIT_4 +#define PCI_EN_DUMMY_RD BIT_3 /* Enable Dummy Read */ +#define PCI_REV_DESC BIT_2 /* Reverse Desc. Bytes */ + /* Bit 1: reserved */ +#define PCI_USEDATA64 BIT_0 /* Use 64Bit Data bus ext */ + + +/* Power Management Region */ +/* PCI_PM_CAP_REG 16 bit Power Management Capabilities */ +#define PCI_PME_SUP_MSK (0x1f<<11) /* Bit 15..11: PM Event Support Mask */ +#define PCI_PME_D3C_SUP BIT_15S /* PME from D3cold Support (if Vaux) */ +#define PCI_PME_D3H_SUP BIT_14S /* PME from D3hot Support */ +#define PCI_PME_D2_SUP BIT_13S /* PME from D2 Support */ +#define PCI_PME_D1_SUP BIT_12S /* PME from D1 Support */ +#define PCI_PME_D0_SUP BIT_11S /* PME from D0 Support */ +#define PCI_PM_D2_SUP BIT_10S /* D2 Support in 33 MHz mode */ +#define PCI_PM_D1_SUP BIT_9S /* D1 Support */ + /* Bit 8.. 6: reserved */ +#define PCI_PM_DSI BIT_5S /* Device Specific Initialization */ +#define PCI_PM_APS BIT_4S /* Auxialiary Power Source */ +#define PCI_PME_CLOCK BIT_3S /* PM Event Clock */ +#define PCI_PM_VER_MSK 7 /* Bit 2.. 0: PM PCI Spec. version */ + +/* PCI_PM_CTL_STS 16 bit Power Management Control/Status */ +#define PCI_PME_STATUS BIT_15S /* PME Status (YUKON only) */ +#define PCI_PM_DAT_SCL (3<<13) /* Bit 14..13: Data Reg. scaling factor */ +#define PCI_PM_DAT_SEL (0xf<<9) /* Bit 12.. 9: PM data selector field */ +#define PCI_PME_EN BIT_8S /* Enable PME# generation (YUKON only) */ + /* Bit 7.. 2: reserved */ +#define PCI_PM_STATE_MSK 3 /* Bit 1.. 0: Power Management State */ + +#define PCI_PM_STATE_D0 0 /* D0: Operational (default) */ +#define PCI_PM_STATE_D1 1 /* D1: (YUKON only) */ +#define PCI_PM_STATE_D2 2 /* D2: (YUKON only) */ +#define PCI_PM_STATE_D3 3 /* D3: HOT, Power Down and Reset */ + +/* VPD Region */ +/* PCI_VPD_ADR_REG 16 bit VPD Address Register */ +#define PCI_VPD_FLAG BIT_15S /* starts VPD rd/wr cycle */ +#define PCI_VPD_ADR_MSK 0x7fffL /* Bit 14.. 0: VPD address mask */ + +/* Control Register File (Address Map) */ + +/* + * Bank 0 + */ +#define B0_RAP 0x0000 /* 8 bit Register Address Port */ + /* 0x0001 - 0x0003: reserved */ +#define B0_CTST 0x0004 /* 16 bit Control/Status register */ +#define B0_LED 0x0006 /* 8 Bit LED register */ +#define B0_POWER_CTRL 0x0007 /* 8 Bit Power Control reg (YUKON only) */ +#define B0_ISRC 0x0008 /* 32 bit Interrupt Source Register */ +#define B0_IMSK 0x000c /* 32 bit Interrupt Mask Register */ +#define B0_HWE_ISRC 0x0010 /* 32 bit HW Error Interrupt Src Reg */ +#define B0_HWE_IMSK 0x0014 /* 32 bit HW Error Interrupt Mask Reg */ +#define B0_SP_ISRC 0x0018 /* 32 bit Special Interrupt Source Reg */ + /* 0x001c: reserved */ + +/* B0 XMAC 1 registers (GENESIS only) */ +#define B0_XM1_IMSK 0x0020 /* 16 bit r/w XMAC 1 Interrupt Mask Register*/ + /* 0x0022 - 0x0027: reserved */ +#define B0_XM1_ISRC 0x0028 /* 16 bit ro XMAC 1 Interrupt Status Reg */ + /* 0x002a - 0x002f: reserved */ +#define B0_XM1_PHY_ADDR 0x0030 /* 16 bit r/w XMAC 1 PHY Address Register */ + /* 0x0032 - 0x0033: reserved */ +#define B0_XM1_PHY_DATA 0x0034 /* 16 bit r/w XMAC 1 PHY Data Register */ + /* 0x0036 - 0x003f: reserved */ + +/* B0 XMAC 2 registers (GENESIS only) */ +#define B0_XM2_IMSK 0x0040 /* 16 bit r/w XMAC 2 Interrupt Mask Register*/ + /* 0x0042 - 0x0047: reserved */ +#define B0_XM2_ISRC 0x0048 /* 16 bit ro XMAC 2 Interrupt Status Reg */ + /* 0x004a - 0x004f: reserved */ +#define B0_XM2_PHY_ADDR 0x0050 /* 16 bit r/w XMAC 2 PHY Address Register */ + /* 0x0052 - 0x0053: reserved */ +#define B0_XM2_PHY_DATA 0x0054 /* 16 bit r/w XMAC 2 PHY Data Register */ + /* 0x0056 - 0x005f: reserved */ + +/* BMU Control Status Registers */ +#define B0_R1_CSR 0x0060 /* 32 bit BMU Ctrl/Stat Rx Queue 1 */ +#define B0_R2_CSR 0x0064 /* 32 bit BMU Ctrl/Stat Rx Queue 2 */ +#define B0_XS1_CSR 0x0068 /* 32 bit BMU Ctrl/Stat Sync Tx Queue 1 */ +#define B0_XA1_CSR 0x006c /* 32 bit BMU Ctrl/Stat Async Tx Queue 1*/ +#define B0_XS2_CSR 0x0070 /* 32 bit BMU Ctrl/Stat Sync Tx Queue 2 */ +#define B0_XA2_CSR 0x0074 /* 32 bit BMU Ctrl/Stat Async Tx Queue 2*/ + /* 0x0078 - 0x007f: reserved */ + +/* + * Bank 1 + * - completely empty (this is the RAP Block window) + * Note: if RAP = 1 this page is reserved + */ + +/* + * Bank 2 + */ +/* NA reg = 48 bit Network Address Register, 3x16 or 8x8 bit readable */ +#define B2_MAC_1 0x0100 /* NA reg MAC Address 1 */ + /* 0x0106 - 0x0107: reserved */ +#define B2_MAC_2 0x0108 /* NA reg MAC Address 2 */ + /* 0x010e - 0x010f: reserved */ +#define B2_MAC_3 0x0110 /* NA reg MAC Address 3 */ + /* 0x0116 - 0x0117: reserved */ +#define B2_CONN_TYP 0x0118 /* 8 bit Connector type */ +#define B2_PMD_TYP 0x0119 /* 8 bit PMD type */ +#define B2_MAC_CFG 0x011a /* 8 bit MAC Configuration / Chip Revision */ +#define B2_CHIP_ID 0x011b /* 8 bit Chip Identification Number */ + /* Eprom registers are currently of no use */ +#define B2_E_0 0x011c /* 8 bit EPROM Byte 0 (ext. SRAM size */ +#define B2_E_1 0x011d /* 8 bit EPROM Byte 1 (PHY type) */ +#define B2_E_2 0x011e /* 8 bit EPROM Byte 2 */ +#define B2_E_3 0x011f /* 8 bit EPROM Byte 3 */ +#define B2_FAR 0x0120 /* 32 bit Flash-Prom Addr Reg/Cnt */ +#define B2_FDP 0x0124 /* 8 bit Flash-Prom Data Port */ + /* 0x0125 - 0x0127: reserved */ +#define B2_LD_CRTL 0x0128 /* 8 bit EPROM loader control register */ +#define B2_LD_TEST 0x0129 /* 8 bit EPROM loader test register */ + /* 0x012a - 0x012f: reserved */ +#define B2_TI_INI 0x0130 /* 32 bit Timer Init Value */ +#define B2_TI_VAL 0x0134 /* 32 bit Timer Value */ +#define B2_TI_CRTL 0x0138 /* 8 bit Timer Control */ +#define B2_TI_TEST 0x0139 /* 8 Bit Timer Test */ + /* 0x013a - 0x013f: reserved */ +#define B2_IRQM_INI 0x0140 /* 32 bit IRQ Moderation Timer Init Reg.*/ +#define B2_IRQM_VAL 0x0144 /* 32 bit IRQ Moderation Timer Value */ +#define B2_IRQM_CTRL 0x0148 /* 8 bit IRQ Moderation Timer Control */ +#define B2_IRQM_TEST 0x0149 /* 8 bit IRQ Moderation Timer Test */ +#define B2_IRQM_MSK 0x014c /* 32 bit IRQ Moderation Mask */ +#define B2_IRQM_HWE_MSK 0x0150 /* 32 bit IRQ Moderation HW Error Mask */ + /* 0x0154 - 0x0157: reserved */ +#define B2_TST_CTRL1 0x0158 /* 8 bit Test Control Register 1 */ +#define B2_TST_CTRL2 0x0159 /* 8 bit Test Control Register 2 */ + /* 0x015a - 0x015b: reserved */ +#define B2_GP_IO 0x015c /* 32 bit General Purpose I/O Register */ +#define B2_I2C_CTRL 0x0160 /* 32 bit I2C HW Control Register */ +#define B2_I2C_DATA 0x0164 /* 32 bit I2C HW Data Register */ +#define B2_I2C_IRQ 0x0168 /* 32 bit I2C HW IRQ Register */ +#define B2_I2C_SW 0x016c /* 32 bit I2C SW Port Register */ + +/* Blink Source Counter (GENESIS only) */ +#define B2_BSC_INI 0x0170 /* 32 bit Blink Source Counter Init Val */ +#define B2_BSC_VAL 0x0174 /* 32 bit Blink Source Counter Value */ +#define B2_BSC_CTRL 0x0178 /* 8 bit Blink Source Counter Control */ +#define B2_BSC_STAT 0x0179 /* 8 bit Blink Source Counter Status */ +#define B2_BSC_TST 0x017a /* 16 bit Blink Source Counter Test Reg */ + /* 0x017c - 0x017f: reserved */ + +/* + * Bank 3 + */ +/* RAM Random Registers */ +#define B3_RAM_ADDR 0x0180 /* 32 bit RAM Address, to read or write */ +#define B3_RAM_DATA_LO 0x0184 /* 32 bit RAM Data Word (low dWord) */ +#define B3_RAM_DATA_HI 0x0188 /* 32 bit RAM Data Word (high dWord) */ + /* 0x018c - 0x018f: reserved */ + +/* RAM Interface Registers */ +/* + * The HW-Spec. calls this registers Timeout Value 0..11. But this names are + * not usable in SW. Please notice these are NOT real timeouts, these are + * the number of qWords transferred continuously. + */ +#define B3_RI_WTO_R1 0x0190 /* 8 bit WR Timeout Queue R1 (TO0) */ +#define B3_RI_WTO_XA1 0x0191 /* 8 bit WR Timeout Queue XA1 (TO1) */ +#define B3_RI_WTO_XS1 0x0192 /* 8 bit WR Timeout Queue XS1 (TO2) */ +#define B3_RI_RTO_R1 0x0193 /* 8 bit RD Timeout Queue R1 (TO3) */ +#define B3_RI_RTO_XA1 0x0194 /* 8 bit RD Timeout Queue XA1 (TO4) */ +#define B3_RI_RTO_XS1 0x0195 /* 8 bit RD Timeout Queue XS1 (TO5) */ +#define B3_RI_WTO_R2 0x0196 /* 8 bit WR Timeout Queue R2 (TO6) */ +#define B3_RI_WTO_XA2 0x0197 /* 8 bit WR Timeout Queue XA2 (TO7) */ +#define B3_RI_WTO_XS2 0x0198 /* 8 bit WR Timeout Queue XS2 (TO8) */ +#define B3_RI_RTO_R2 0x0199 /* 8 bit RD Timeout Queue R2 (TO9) */ +#define B3_RI_RTO_XA2 0x019a /* 8 bit RD Timeout Queue XA2 (TO10)*/ +#define B3_RI_RTO_XS2 0x019b /* 8 bit RD Timeout Queue XS2 (TO11)*/ +#define B3_RI_TO_VAL 0x019c /* 8 bit Current Timeout Count Val */ + /* 0x019d - 0x019f: reserved */ +#define B3_RI_CTRL 0x01a0 /* 16 bit RAM Interface Control Register */ +#define B3_RI_TEST 0x01a2 /* 8 bit RAM Interface Test Register */ + /* 0x01a3 - 0x01af: reserved */ + +/* MAC Arbiter Registers (GENESIS only) */ +/* these are the no. of qWord transferred continuously and NOT real timeouts */ +#define B3_MA_TOINI_RX1 0x01b0 /* 8 bit Timeout Init Val Rx Path MAC 1 */ +#define B3_MA_TOINI_RX2 0x01b1 /* 8 bit Timeout Init Val Rx Path MAC 2 */ +#define B3_MA_TOINI_TX1 0x01b2 /* 8 bit Timeout Init Val Tx Path MAC 1 */ +#define B3_MA_TOINI_TX2 0x01b3 /* 8 bit Timeout Init Val Tx Path MAC 2 */ +#define B3_MA_TOVAL_RX1 0x01b4 /* 8 bit Timeout Value Rx Path MAC 1 */ +#define B3_MA_TOVAL_RX2 0x01b5 /* 8 bit Timeout Value Rx Path MAC 1 */ +#define B3_MA_TOVAL_TX1 0x01b6 /* 8 bit Timeout Value Tx Path MAC 2 */ +#define B3_MA_TOVAL_TX2 0x01b7 /* 8 bit Timeout Value Tx Path MAC 2 */ +#define B3_MA_TO_CTRL 0x01b8 /* 16 bit MAC Arbiter Timeout Ctrl Reg */ +#define B3_MA_TO_TEST 0x01ba /* 16 bit MAC Arbiter Timeout Test Reg */ + /* 0x01bc - 0x01bf: reserved */ +#define B3_MA_RCINI_RX1 0x01c0 /* 8 bit Recovery Init Val Rx Path MAC 1 */ +#define B3_MA_RCINI_RX2 0x01c1 /* 8 bit Recovery Init Val Rx Path MAC 2 */ +#define B3_MA_RCINI_TX1 0x01c2 /* 8 bit Recovery Init Val Tx Path MAC 1 */ +#define B3_MA_RCINI_TX2 0x01c3 /* 8 bit Recovery Init Val Tx Path MAC 2 */ +#define B3_MA_RCVAL_RX1 0x01c4 /* 8 bit Recovery Value Rx Path MAC 1 */ +#define B3_MA_RCVAL_RX2 0x01c5 /* 8 bit Recovery Value Rx Path MAC 1 */ +#define B3_MA_RCVAL_TX1 0x01c6 /* 8 bit Recovery Value Tx Path MAC 2 */ +#define B3_MA_RCVAL_TX2 0x01c7 /* 8 bit Recovery Value Tx Path MAC 2 */ +#define B3_MA_RC_CTRL 0x01c8 /* 16 bit MAC Arbiter Recovery Ctrl Reg */ +#define B3_MA_RC_TEST 0x01ca /* 16 bit MAC Arbiter Recovery Test Reg */ + /* 0x01cc - 0x01cf: reserved */ + +/* Packet Arbiter Registers (GENESIS only) */ +/* these are real timeouts */ +#define B3_PA_TOINI_RX1 0x01d0 /* 16 bit Timeout Init Val Rx Path MAC 1 */ + /* 0x01d2 - 0x01d3: reserved */ +#define B3_PA_TOINI_RX2 0x01d4 /* 16 bit Timeout Init Val Rx Path MAC 2 */ + /* 0x01d6 - 0x01d7: reserved */ +#define B3_PA_TOINI_TX1 0x01d8 /* 16 bit Timeout Init Val Tx Path MAC 1 */ + /* 0x01da - 0x01db: reserved */ +#define B3_PA_TOINI_TX2 0x01dc /* 16 bit Timeout Init Val Tx Path MAC 2 */ + /* 0x01de - 0x01df: reserved */ +#define B3_PA_TOVAL_RX1 0x01e0 /* 16 bit Timeout Val Rx Path MAC 1 */ + /* 0x01e2 - 0x01e3: reserved */ +#define B3_PA_TOVAL_RX2 0x01e4 /* 16 bit Timeout Val Rx Path MAC 2 */ + /* 0x01e6 - 0x01e7: reserved */ +#define B3_PA_TOVAL_TX1 0x01e8 /* 16 bit Timeout Val Tx Path MAC 1 */ + /* 0x01ea - 0x01eb: reserved */ +#define B3_PA_TOVAL_TX2 0x01ec /* 16 bit Timeout Val Tx Path MAC 2 */ + /* 0x01ee - 0x01ef: reserved */ +#define B3_PA_CTRL 0x01f0 /* 16 bit Packet Arbiter Ctrl Register */ +#define B3_PA_TEST 0x01f2 /* 16 bit Packet Arbiter Test Register */ + /* 0x01f4 - 0x01ff: reserved */ + +/* + * Bank 4 - 5 + */ +/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */ +#define TXA_ITI_INI 0x0200 /* 32 bit Tx Arb Interval Timer Init Val*/ +#define TXA_ITI_VAL 0x0204 /* 32 bit Tx Arb Interval Timer Value */ +#define TXA_LIM_INI 0x0208 /* 32 bit Tx Arb Limit Counter Init Val */ +#define TXA_LIM_VAL 0x020c /* 32 bit Tx Arb Limit Counter Value */ +#define TXA_CTRL 0x0210 /* 8 bit Tx Arbiter Control Register */ +#define TXA_TEST 0x0211 /* 8 bit Tx Arbiter Test Register */ +#define TXA_STAT 0x0212 /* 8 bit Tx Arbiter Status Register */ + /* 0x0213 - 0x027f: reserved */ + /* 0x0280 - 0x0292: MAC 2 */ + /* 0x0213 - 0x027f: reserved */ + +/* + * Bank 6 + */ +/* External registers (GENESIS only) */ +#define B6_EXT_REG 0x0300 + +/* + * Bank 7 + */ +/* This is a copy of the Configuration register file (lower half) */ +#define B7_CFG_SPC 0x0380 + +/* + * Bank 8 - 15 + */ +/* Receive and Transmit Queue Registers, use Q_ADDR() to access */ +#define B8_Q_REGS 0x0400 + +/* Queue Register Offsets, use Q_ADDR() to access */ +#define Q_D 0x00 /* 8*32 bit Current Descriptor */ +#define Q_DA_L 0x20 /* 32 bit Current Descriptor Address Low dWord */ +#define Q_DA_H 0x24 /* 32 bit Current Descriptor Address High dWord */ +#define Q_AC_L 0x28 /* 32 bit Current Address Counter Low dWord */ +#define Q_AC_H 0x2c /* 32 bit Current Address Counter High dWord */ +#define Q_BC 0x30 /* 32 bit Current Byte Counter */ +#define Q_CSR 0x34 /* 32 bit BMU Control/Status Register */ +#define Q_F 0x38 /* 32 bit Flag Register */ +#define Q_T1 0x3c /* 32 bit Test Register 1 */ +#define Q_T1_TR 0x3c /* 8 bit Test Register 1 Transfer SM */ +#define Q_T1_WR 0x3d /* 8 bit Test Register 1 Write Descriptor SM */ +#define Q_T1_RD 0x3e /* 8 bit Test Register 1 Read Descriptor SM */ +#define Q_T1_SV 0x3f /* 8 bit Test Register 1 Supervisor SM */ +#define Q_T2 0x40 /* 32 bit Test Register 2 */ +#define Q_T3 0x44 /* 32 bit Test Register 3 */ + /* 0x48 - 0x7f: reserved */ + +/* + * Bank 16 - 23 + */ +/* RAM Buffer Registers */ +#define B16_RAM_REGS 0x0800 + +/* RAM Buffer Register Offsets, use RB_ADDR() to access */ +#define RB_START 0x00 /* 32 bit RAM Buffer Start Address */ +#define RB_END 0x04 /* 32 bit RAM Buffer End Address */ +#define RB_WP 0x08 /* 32 bit RAM Buffer Write Pointer */ +#define RB_RP 0x0c /* 32 bit RAM Buffer Read Pointer */ +#define RB_RX_UTPP 0x10 /* 32 bit Rx Upper Threshold, Pause Pack */ +#define RB_RX_LTPP 0x14 /* 32 bit Rx Lower Threshold, Pause Pack */ +#define RB_RX_UTHP 0x18 /* 32 bit Rx Upper Threshold, High Prio */ +#define RB_RX_LTHP 0x1c /* 32 bit Rx Lower Threshold, High Prio */ + /* 0x10 - 0x1f: reserved at Tx RAM Buffer Registers */ +#define RB_PC 0x20 /* 32 bit RAM Buffer Packet Counter */ +#define RB_LEV 0x24 /* 32 bit RAM Buffer Level Register */ +#define RB_CTRL 0x28 /* 8 bit RAM Buffer Control Register */ +#define RB_TST1 0x29 /* 8 bit RAM Buffer Test Register 1 */ +#define RB_TST2 0x2A /* 8 bit RAM Buffer Test Register 2 */ + /* 0x2c - 0x7f: reserved */ + +/* + * Bank 24 + */ +/* + * Receive MAC FIFO, Receive LED, and Link_Sync regs (GENESIS only) + * use MR_ADDR() to access + */ +#define RX_MFF_EA 0x0c00 /* 32 bit Receive MAC FIFO End Address */ +#define RX_MFF_WP 0x0c04 /* 32 bit Receive MAC FIFO Write Pointer */ + /* 0x0c08 - 0x0c0b: reserved */ +#define RX_MFF_RP 0x0c0c /* 32 bit Receive MAC FIFO Read Pointer */ +#define RX_MFF_PC 0x0c10 /* 32 bit Receive MAC FIFO Packet Cnt */ +#define RX_MFF_LEV 0x0c14 /* 32 bit Receive MAC FIFO Level */ +#define RX_MFF_CTRL1 0x0c18 /* 16 bit Receive MAC FIFO Control Reg 1*/ +#define RX_MFF_STAT_TO 0x0c1a /* 8 bit Receive MAC Status Timeout */ +#define RX_MFF_TIST_TO 0x0c1b /* 8 bit Receive MAC Time Stamp Timeout */ +#define RX_MFF_CTRL2 0x0c1c /* 8 bit Receive MAC FIFO Control Reg 2*/ +#define RX_MFF_TST1 0x0c1d /* 8 bit Receive MAC FIFO Test Reg 1 */ +#define RX_MFF_TST2 0x0c1e /* 8 bit Receive MAC FIFO Test Reg 2 */ + /* 0x0c1f: reserved */ +#define RX_LED_INI 0x0c20 /* 32 bit Receive LED Cnt Init Value */ +#define RX_LED_VAL 0x0c24 /* 32 bit Receive LED Cnt Current Value */ +#define RX_LED_CTRL 0x0c28 /* 8 bit Receive LED Cnt Control Reg */ +#define RX_LED_TST 0x0c29 /* 8 bit Receive LED Cnt Test Register */ + /* 0x0c2a - 0x0c2f: reserved */ +#define LNK_SYNC_INI 0x0c30 /* 32 bit Link Sync Cnt Init Value */ +#define LNK_SYNC_VAL 0x0c34 /* 32 bit Link Sync Cnt Current Value */ +#define LNK_SYNC_CTRL 0x0c38 /* 8 bit Link Sync Cnt Control Register */ +#define LNK_SYNC_TST 0x0c39 /* 8 bit Link Sync Cnt Test Register */ + /* 0x0c3a - 0x0c3b: reserved */ +#define LNK_LED_REG 0x0c3c /* 8 bit Link LED Register */ + /* 0x0c3d - 0x0c3f: reserved */ + +/* Receive GMAC FIFO (YUKON only), use MR_ADDR() to access */ +#define RX_GMF_EA 0x0c40 /* 32 bit Rx GMAC FIFO End Address */ +#define RX_GMF_AF_THR 0x0c44 /* 32 bit Rx GMAC FIFO Almost Full Thresh. */ +#define RX_GMF_CTRL_T 0x0c48 /* 32 bit Rx GMAC FIFO Control/Test */ +#define RX_GMF_FL_MSK 0x0c4c /* 32 bit Rx GMAC FIFO Flush Mask */ +#define RX_GMF_FL_THR 0x0c50 /* 32 bit Rx GMAC FIFO Flush Threshold */ + /* 0x0c54 - 0x0c5f: reserved */ +#define RX_GMF_WP 0x0c60 /* 32 bit Rx GMAC FIFO Write Pointer */ + /* 0x0c64 - 0x0c67: reserved */ +#define RX_GMF_WLEV 0x0c68 /* 32 bit Rx GMAC FIFO Write Level */ + /* 0x0c6c - 0x0c6f: reserved */ +#define RX_GMF_RP 0x0c70 /* 32 bit Rx GMAC FIFO Read Pointer */ + /* 0x0c74 - 0x0c77: reserved */ +#define RX_GMF_RLEV 0x0c78 /* 32 bit Rx GMAC FIFO Read Level */ + /* 0x0c7c - 0x0c7f: reserved */ + +/* + * Bank 25 + */ + /* 0x0c80 - 0x0cbf: MAC 2 */ + /* 0x0cc0 - 0x0cff: reserved */ + +/* + * Bank 26 + */ +/* + * Transmit MAC FIFO and Transmit LED Registers (GENESIS only), + * use MR_ADDR() to access + */ +#define TX_MFF_EA 0x0d00 /* 32 bit Transmit MAC FIFO End Address */ +#define TX_MFF_WP 0x0d04 /* 32 bit Transmit MAC FIFO WR Pointer */ +#define TX_MFF_WSP 0x0d08 /* 32 bit Transmit MAC FIFO WR Shadow Ptr */ +#define TX_MFF_RP 0x0d0c /* 32 bit Transmit MAC FIFO RD Pointer */ +#define TX_MFF_PC 0x0d10 /* 32 bit Transmit MAC FIFO Packet Cnt */ +#define TX_MFF_LEV 0x0d14 /* 32 bit Transmit MAC FIFO Level */ +#define TX_MFF_CTRL1 0x0d18 /* 16 bit Transmit MAC FIFO Ctrl Reg 1 */ +#define TX_MFF_WAF 0x0d1a /* 8 bit Transmit MAC Wait after flush */ + /* 0x0c1b: reserved */ +#define TX_MFF_CTRL2 0x0d1c /* 8 bit Transmit MAC FIFO Ctrl Reg 2 */ +#define TX_MFF_TST1 0x0d1d /* 8 bit Transmit MAC FIFO Test Reg 1 */ +#define TX_MFF_TST2 0x0d1e /* 8 bit Transmit MAC FIFO Test Reg 2 */ + /* 0x0d1f: reserved */ +#define TX_LED_INI 0x0d20 /* 32 bit Transmit LED Cnt Init Value */ +#define TX_LED_VAL 0x0d24 /* 32 bit Transmit LED Cnt Current Val */ +#define TX_LED_CTRL 0x0d28 /* 8 bit Transmit LED Cnt Control Reg */ +#define TX_LED_TST 0x0d29 /* 8 bit Transmit LED Cnt Test Reg */ + /* 0x0d2a - 0x0d3f: reserved */ + +/* Transmit GMAC FIFO (YUKON only), use MR_ADDR() to access */ +#define TX_GMF_EA 0x0d40 /* 32 bit Tx GMAC FIFO End Address */ +#define TX_GMF_AE_THR 0x0d44 /* 32 bit Tx GMAC FIFO Almost Empty Thresh.*/ +#define TX_GMF_CTRL_T 0x0d48 /* 32 bit Tx GMAC FIFO Control/Test */ + /* 0x0d4c - 0x0d5f: reserved */ +#define TX_GMF_WP 0x0d60 /* 32 bit Tx GMAC FIFO Write Pointer */ +#define TX_GMF_WSP 0x0d64 /* 32 bit Tx GMAC FIFO Write Shadow Ptr. */ +#define TX_GMF_WLEV 0x0d68 /* 32 bit Tx GMAC FIFO Write Level */ + /* 0x0d6c - 0x0d6f: reserved */ +#define TX_GMF_RP 0x0d70 /* 32 bit Tx GMAC FIFO Read Pointer */ +#define TX_GMF_RSTP 0x0d74 /* 32 bit Tx GMAC FIFO Restart Pointer */ +#define TX_GMF_RLEV 0x0d78 /* 32 bit Tx GMAC FIFO Read Level */ + /* 0x0d7c - 0x0d7f: reserved */ + +/* + * Bank 27 + */ + /* 0x0d80 - 0x0dbf: MAC 2 */ + /* 0x0daa - 0x0dff: reserved */ + +/* + * Bank 28 + */ +/* Descriptor Poll Timer Registers */ +#define B28_DPT_INI 0x0e00 /* 24 bit Descriptor Poll Timer Init Val */ +#define B28_DPT_VAL 0x0e04 /* 24 bit Descriptor Poll Timer Curr Val */ +#define B28_DPT_CTRL 0x0e08 /* 8 bit Descriptor Poll Timer Ctrl Reg */ + /* 0x0e09: reserved */ +#define B28_DPT_TST 0x0e0a /* 8 bit Descriptor Poll Timer Test Reg */ + /* 0x0e0b: reserved */ + +/* Time Stamp Timer Registers (YUKON only) */ + /* 0x0e10: reserved */ +#define GMAC_TI_ST_VAL 0x0e14 /* 32 bit Time Stamp Timer Curr Val */ +#define GMAC_TI_ST_CTRL 0x0e18 /* 8 bit Time Stamp Timer Ctrl Reg */ + /* 0x0e19: reserved */ +#define GMAC_TI_ST_TST 0x0e1a /* 8 bit Time Stamp Timer Test Reg */ + /* 0x0e1b - 0x0e7f: reserved */ + +/* + * Bank 29 + */ + /* 0x0e80 - 0x0efc: reserved */ + +/* + * Bank 30 + */ +/* GMAC and GPHY Control Registers (YUKON only) */ +#define GMAC_CTRL 0x0f00 /* 32 bit GMAC Control Reg */ +#define GPHY_CTRL 0x0f04 /* 32 bit GPHY Control Reg */ +#define GMAC_IRQ_SRC 0x0f08 /* 8 bit GMAC Interrupt Source Reg */ + /* 0x0f09 - 0x0f0b: reserved */ +#define GMAC_IRQ_MSK 0x0f0c /* 8 bit GMAC Interrupt Mask Reg */ + /* 0x0f0d - 0x0f0f: reserved */ +#define GMAC_LINK_CTRL 0x0f10 /* 16 bit Link Control Reg */ + /* 0x0f14 - 0x0f1f: reserved */ + +/* Wake-up Frame Pattern Match Control Registers (YUKON only) */ + +#define WOL_REG_OFFS 0x20 /* HW-Bug: Address is + 0x20 against spec. */ + +#define WOL_CTRL_STAT 0x0f20 /* 16 bit WOL Control/Status Reg */ +#define WOL_MATCH_CTL 0x0f22 /* 8 bit WOL Match Control Reg */ +#define WOL_MATCH_RES 0x0f23 /* 8 bit WOL Match Result Reg */ +#define WOL_MAC_ADDR_LO 0x0f24 /* 32 bit WOL MAC Address Low */ +#define WOL_MAC_ADDR_HI 0x0f28 /* 16 bit WOL MAC Address High */ +#define WOL_PATT_RPTR 0x0f2c /* 8 bit WOL Pattern Read Ptr */ + +/* use this macro to access above registers */ +#define WOL_REG(Reg) ((Reg) + (pAC->GIni.GIWolOffs)) + + +/* WOL Pattern Length Registers (YUKON only) */ + +#define WOL_PATT_LEN_LO 0x0f30 /* 32 bit WOL Pattern Length 3..0 */ +#define WOL_PATT_LEN_HI 0x0f34 /* 24 bit WOL Pattern Length 6..4 */ + +/* WOL Pattern Counter Registers (YUKON only) */ + +#define WOL_PATT_CNT_0 0x0f38 /* 32 bit WOL Pattern Counter 3..0 */ +#define WOL_PATT_CNT_4 0x0f3c /* 24 bit WOL Pattern Counter 6..4 */ + /* 0x0f40 - 0x0f7f: reserved */ + +/* + * Bank 31 + */ +/* 0x0f80 - 0x0fff: reserved */ + +/* + * Bank 32 - 33 + */ +#define WOL_PATT_RAM_1 0x1000 /* WOL Pattern RAM Link 1 */ + +/* + * Bank 0x22 - 0x3f + */ +/* 0x1100 - 0x1fff: reserved */ + +/* + * Bank 0x40 - 0x4f + */ +#define BASE_XMAC_1 0x2000 /* XMAC 1 registers */ + +/* + * Bank 0x50 - 0x5f + */ + +#define BASE_GMAC_1 0x2800 /* GMAC 1 registers */ + +/* + * Bank 0x60 - 0x6f + */ +#define BASE_XMAC_2 0x3000 /* XMAC 2 registers */ + +/* + * Bank 0x70 - 0x7f + */ +#define BASE_GMAC_2 0x3800 /* GMAC 2 registers */ + +/* + * Control Register Bit Definitions: + */ +/* B0_RAP 8 bit Register Address Port */ + /* Bit 7: reserved */ +#define RAP_RAP 0x3f /* Bit 6..0: 0 = block 0,..,6f = block 6f */ + +/* B0_CTST 16 bit Control/Status register */ + /* Bit 15..14: reserved */ +#define CS_CLK_RUN_HOT BIT_13S /* CLK_RUN hot m. (YUKON-Lite only) */ +#define CS_CLK_RUN_RST BIT_12S /* CLK_RUN reset (YUKON-Lite only) */ +#define CS_CLK_RUN_ENA BIT_11S /* CLK_RUN enable (YUKON-Lite only) */ +#define CS_VAUX_AVAIL BIT_10S /* VAUX available (YUKON only) */ +#define CS_BUS_CLOCK BIT_9S /* Bus Clock 0/1 = 33/66 MHz */ +#define CS_BUS_SLOT_SZ BIT_8S /* Slot Size 0/1 = 32/64 bit slot */ +#define CS_ST_SW_IRQ BIT_7S /* Set IRQ SW Request */ +#define CS_CL_SW_IRQ BIT_6S /* Clear IRQ SW Request */ +#define CS_STOP_DONE BIT_5S /* Stop Master is finished */ +#define CS_STOP_MAST BIT_4S /* Command Bit to stop the master */ +#define CS_MRST_CLR BIT_3S /* Clear Master reset */ +#define CS_MRST_SET BIT_2S /* Set Master reset */ +#define CS_RST_CLR BIT_1S /* Clear Software reset */ +#define CS_RST_SET BIT_0S /* Set Software reset */ + +/* B0_LED 8 Bit LED register */ + /* Bit 7.. 2: reserved */ +#define LED_STAT_ON BIT_1S /* Status LED on */ +#define LED_STAT_OFF BIT_0S /* Status LED off */ + +/* B0_POWER_CTRL 8 Bit Power Control reg (YUKON only) */ +#define PC_VAUX_ENA BIT_7 /* Switch VAUX Enable */ +#define PC_VAUX_DIS BIT_6 /* Switch VAUX Disable */ +#define PC_VCC_ENA BIT_5 /* Switch VCC Enable */ +#define PC_VCC_DIS BIT_4 /* Switch VCC Disable */ +#define PC_VAUX_ON BIT_3 /* Switch VAUX On */ +#define PC_VAUX_OFF BIT_2 /* Switch VAUX Off */ +#define PC_VCC_ON BIT_1 /* Switch VCC On */ +#define PC_VCC_OFF BIT_0 /* Switch VCC Off */ + +/* B0_ISRC 32 bit Interrupt Source Register */ +/* B0_IMSK 32 bit Interrupt Mask Register */ +/* B0_SP_ISRC 32 bit Special Interrupt Source Reg */ +/* B2_IRQM_MSK 32 bit IRQ Moderation Mask */ +#define IS_ALL_MSK 0xbfffffffL /* All Interrupt bits */ +#define IS_HW_ERR BIT_31 /* Interrupt HW Error */ + /* Bit 30: reserved */ +#define IS_PA_TO_RX1 BIT_29 /* Packet Arb Timeout Rx1 */ +#define IS_PA_TO_RX2 BIT_28 /* Packet Arb Timeout Rx2 */ +#define IS_PA_TO_TX1 BIT_27 /* Packet Arb Timeout Tx1 */ +#define IS_PA_TO_TX2 BIT_26 /* Packet Arb Timeout Tx2 */ +#define IS_I2C_READY BIT_25 /* IRQ on end of I2C Tx */ +#define IS_IRQ_SW BIT_24 /* SW forced IRQ */ +#define IS_EXT_REG BIT_23 /* IRQ from LM80 or PHY (GENESIS only) */ + /* IRQ from PHY (YUKON only) */ +#define IS_TIMINT BIT_22 /* IRQ from Timer */ +#define IS_MAC1 BIT_21 /* IRQ from MAC 1 */ +#define IS_LNK_SYNC_M1 BIT_20 /* Link Sync Cnt wrap MAC 1 */ +#define IS_MAC2 BIT_19 /* IRQ from MAC 2 */ +#define IS_LNK_SYNC_M2 BIT_18 /* Link Sync Cnt wrap MAC 2 */ +/* Receive Queue 1 */ +#define IS_R1_B BIT_17 /* Q_R1 End of Buffer */ +#define IS_R1_F BIT_16 /* Q_R1 End of Frame */ +#define IS_R1_C BIT_15 /* Q_R1 Encoding Error */ +/* Receive Queue 2 */ +#define IS_R2_B BIT_14 /* Q_R2 End of Buffer */ +#define IS_R2_F BIT_13 /* Q_R2 End of Frame */ +#define IS_R2_C BIT_12 /* Q_R2 Encoding Error */ +/* Synchronous Transmit Queue 1 */ +#define IS_XS1_B BIT_11 /* Q_XS1 End of Buffer */ +#define IS_XS1_F BIT_10 /* Q_XS1 End of Frame */ +#define IS_XS1_C BIT_9 /* Q_XS1 Encoding Error */ +/* Asynchronous Transmit Queue 1 */ +#define IS_XA1_B BIT_8 /* Q_XA1 End of Buffer */ +#define IS_XA1_F BIT_7 /* Q_XA1 End of Frame */ +#define IS_XA1_C BIT_6 /* Q_XA1 Encoding Error */ +/* Synchronous Transmit Queue 2 */ +#define IS_XS2_B BIT_5 /* Q_XS2 End of Buffer */ +#define IS_XS2_F BIT_4 /* Q_XS2 End of Frame */ +#define IS_XS2_C BIT_3 /* Q_XS2 Encoding Error */ +/* Asynchronous Transmit Queue 2 */ +#define IS_XA2_B BIT_2 /* Q_XA2 End of Buffer */ +#define IS_XA2_F BIT_1 /* Q_XA2 End of Frame */ +#define IS_XA2_C BIT_0 /* Q_XA2 Encoding Error */ + + +/* B0_HWE_ISRC 32 bit HW Error Interrupt Src Reg */ +/* B0_HWE_IMSK 32 bit HW Error Interrupt Mask Reg */ +/* B2_IRQM_HWE_MSK 32 bit IRQ Moderation HW Error Mask */ +#define IS_ERR_MSK 0x00000fffL /* All Error bits */ + /* Bit 31..14: reserved */ +#define IS_IRQ_TIST_OV BIT_13 /* Time Stamp Timer Overflow (YUKON only) */ +#define IS_IRQ_SENSOR BIT_12 /* IRQ from Sensor (YUKON only) */ +#define IS_IRQ_MST_ERR BIT_11 /* IRQ master error detected */ +#define IS_IRQ_STAT BIT_10 /* IRQ status exception */ +#define IS_NO_STAT_M1 BIT_9 /* No Rx Status from MAC 1 */ +#define IS_NO_STAT_M2 BIT_8 /* No Rx Status from MAC 2 */ +#define IS_NO_TIST_M1 BIT_7 /* No Time Stamp from MAC 1 */ +#define IS_NO_TIST_M2 BIT_6 /* No Time Stamp from MAC 2 */ +#define IS_RAM_RD_PAR BIT_5 /* RAM Read Parity Error */ +#define IS_RAM_WR_PAR BIT_4 /* RAM Write Parity Error */ +#define IS_M1_PAR_ERR BIT_3 /* MAC 1 Parity Error */ +#define IS_M2_PAR_ERR BIT_2 /* MAC 2 Parity Error */ +#define IS_R1_PAR_ERR BIT_1 /* Queue R1 Parity Error */ +#define IS_R2_PAR_ERR BIT_0 /* Queue R2 Parity Error */ + +/* B2_CONN_TYP 8 bit Connector type */ +/* B2_PMD_TYP 8 bit PMD type */ +/* Values of connector and PMD type comply to SysKonnect internal std */ + +/* B2_MAC_CFG 8 bit MAC Configuration / Chip Revision */ +#define CFG_CHIP_R_MSK (0xf<<4) /* Bit 7.. 4: Chip Revision */ + /* Bit 3.. 2: reserved */ +#define CFG_DIS_M2_CLK BIT_1S /* Disable Clock for 2nd MAC */ +#define CFG_SNG_MAC BIT_0S /* MAC Config: 0=2 MACs / 1=1 MAC*/ + +/* B2_CHIP_ID 8 bit Chip Identification Number */ +#define CHIP_ID_GENESIS 0x0a /* Chip ID for GENESIS */ +#define CHIP_ID_YUKON 0xb0 /* Chip ID for YUKON */ + +/* B2_FAR 32 bit Flash-Prom Addr Reg/Cnt */ +#define FAR_ADDR 0x1ffffL /* Bit 16.. 0: FPROM Address mask */ + +/* B2_LD_CRTL 8 bit EPROM loader control register */ +/* Bits are currently reserved */ + +/* B2_LD_TEST 8 bit EPROM loader test register */ + /* Bit 7.. 4: reserved */ +#define LD_T_ON BIT_3S /* Loader Test mode on */ +#define LD_T_OFF BIT_2S /* Loader Test mode off */ +#define LD_T_STEP BIT_1S /* Decrement FPROM addr. Counter */ +#define LD_START BIT_0S /* Start loading FPROM */ + +/* + * Timer Section + */ +/* B2_TI_CRTL 8 bit Timer control */ +/* B2_IRQM_CTRL 8 bit IRQ Moderation Timer Control */ + /* Bit 7.. 3: reserved */ +#define TIM_START BIT_2S /* Start Timer */ +#define TIM_STOP BIT_1S /* Stop Timer */ +#define TIM_CLR_IRQ BIT_0S /* Clear Timer IRQ (!IRQM) */ + +/* B2_TI_TEST 8 Bit Timer Test */ +/* B2_IRQM_TEST 8 bit IRQ Moderation Timer Test */ +/* B28_DPT_TST 8 bit Descriptor Poll Timer Test Reg */ + /* Bit 7.. 3: reserved */ +#define TIM_T_ON BIT_2S /* Test mode on */ +#define TIM_T_OFF BIT_1S /* Test mode off */ +#define TIM_T_STEP BIT_0S /* Test step */ + +/* B28_DPT_INI 32 bit Descriptor Poll Timer Init Val */ +/* B28_DPT_VAL 32 bit Descriptor Poll Timer Curr Val */ + /* Bit 31..24: reserved */ +#define DPT_MSK 0x00ffffffL /* Bit 23.. 0: Desc Poll Timer Bits */ + +/* B28_DPT_CTRL 8 bit Descriptor Poll Timer Ctrl Reg */ + /* Bit 7.. 2: reserved */ +#define DPT_START BIT_1S /* Start Descriptor Poll Timer */ +#define DPT_STOP BIT_0S /* Stop Descriptor Poll Timer */ + +/* B2_E_3 8 bit lower 4 bits used for HW self test result */ +#define B2_E3_RES_MASK 0x0f + +/* B2_TST_CTRL1 8 bit Test Control Register 1 */ +#define TST_FRC_DPERR_MR BIT_7S /* force DATAPERR on MST RD */ +#define TST_FRC_DPERR_MW BIT_6S /* force DATAPERR on MST WR */ +#define TST_FRC_DPERR_TR BIT_5S /* force DATAPERR on TRG RD */ +#define TST_FRC_DPERR_TW BIT_4S /* force DATAPERR on TRG WR */ +#define TST_FRC_APERR_M BIT_3S /* force ADDRPERR on MST */ +#define TST_FRC_APERR_T BIT_2S /* force ADDRPERR on TRG */ +#define TST_CFG_WRITE_ON BIT_1S /* Enable Config Reg WR */ +#define TST_CFG_WRITE_OFF BIT_0S /* Disable Config Reg WR */ + +/* B2_TST_CTRL2 8 bit Test Control Register 2 */ + /* Bit 7.. 4: reserved */ + /* force the following error on the next master read/write */ +#define TST_FRC_DPERR_MR64 BIT_3S /* DataPERR RD 64 */ +#define TST_FRC_DPERR_MW64 BIT_2S /* DataPERR WR 64 */ +#define TST_FRC_APERR_1M64 BIT_1S /* AddrPERR on 1. phase */ +#define TST_FRC_APERR_2M64 BIT_0S /* AddrPERR on 2. phase */ + +/* B2_GP_IO 32 bit General Purpose I/O Register */ + /* Bit 31..26: reserved */ +#define GP_DIR_9 BIT_25 /* IO_9 direct, 0=I/1=O */ +#define GP_DIR_8 BIT_24 /* IO_8 direct, 0=I/1=O */ +#define GP_DIR_7 BIT_23 /* IO_7 direct, 0=I/1=O */ +#define GP_DIR_6 BIT_22 /* IO_6 direct, 0=I/1=O */ +#define GP_DIR_5 BIT_21 /* IO_5 direct, 0=I/1=O */ +#define GP_DIR_4 BIT_20 /* IO_4 direct, 0=I/1=O */ +#define GP_DIR_3 BIT_19 /* IO_3 direct, 0=I/1=O */ +#define GP_DIR_2 BIT_18 /* IO_2 direct, 0=I/1=O */ +#define GP_DIR_1 BIT_17 /* IO_1 direct, 0=I/1=O */ +#define GP_DIR_0 BIT_16 /* IO_0 direct, 0=I/1=O */ + /* Bit 15..10: reserved */ +#define GP_IO_9 BIT_9 /* IO_9 pin */ +#define GP_IO_8 BIT_8 /* IO_8 pin */ +#define GP_IO_7 BIT_7 /* IO_7 pin */ +#define GP_IO_6 BIT_6 /* IO_6 pin */ +#define GP_IO_5 BIT_5 /* IO_5 pin */ +#define GP_IO_4 BIT_4 /* IO_4 pin */ +#define GP_IO_3 BIT_3 /* IO_3 pin */ +#define GP_IO_2 BIT_2 /* IO_2 pin */ +#define GP_IO_1 BIT_1 /* IO_1 pin */ +#define GP_IO_0 BIT_0 /* IO_0 pin */ + +/* B2_I2C_CTRL 32 bit I2C HW Control Register */ +#define I2C_FLAG BIT_31 /* Start read/write if WR */ +#define I2C_ADDR (0x7fffL<<16) /* Bit 30..16: Addr to be RD/WR */ +#define I2C_DEV_SEL (0x7fL<<9) /* Bit 15.. 9: I2C Device Select */ + /* Bit 8.. 5: reserved */ +#define I2C_BURST_LEN BIT_4 /* Burst Len, 1/4 bytes */ +#define I2C_DEV_SIZE (7L<<1) /* Bit 3.. 1: I2C Device Size */ +#define I2C_025K_DEV (0L<<1) /* 0: 256 Bytes or smal. */ +#define I2C_05K_DEV (1L<<1) /* 1: 512 Bytes */ +#define I2C_1K_DEV (2L<<1) /* 2: 1024 Bytes */ +#define I2C_2K_DEV (3L<<1) /* 3: 2048 Bytes */ +#define I2C_4K_DEV (4L<<1) /* 4: 4096 Bytes */ +#define I2C_8K_DEV (5L<<1) /* 5: 8192 Bytes */ +#define I2C_16K_DEV (6L<<1) /* 6: 16384 Bytes */ +#define I2C_32K_DEV (7L<<1) /* 7: 32768 Bytes */ +#define I2C_STOP BIT_0 /* Interrupt I2C transfer */ + +/* B2_I2C_IRQ 32 bit I2C HW IRQ Register */ + /* Bit 31.. 1 reserved */ +#define I2C_CLR_IRQ BIT_0 /* Clear I2C IRQ */ + +/* B2_I2C_SW 32 bit (8 bit access) I2C HW SW Port Register */ + /* Bit 7.. 3: reserved */ +#define I2C_DATA_DIR BIT_2S /* direction of I2C_DATA */ +#define I2C_DATA BIT_1S /* I2C Data Port */ +#define I2C_CLK BIT_0S /* I2C Clock Port */ + +/* + * I2C Address + */ +#define I2C_SENS_ADDR LM80_ADDR /* I2C Sensor Address, (Volt and Temp)*/ + + +/* B2_BSC_CTRL 8 bit Blink Source Counter Control */ + /* Bit 7.. 2: reserved */ +#define BSC_START BIT_1S /* Start Blink Source Counter */ +#define BSC_STOP BIT_0S /* Stop Blink Source Counter */ + +/* B2_BSC_STAT 8 bit Blink Source Counter Status */ + /* Bit 7.. 1: reserved */ +#define BSC_SRC BIT_0S /* Blink Source, 0=Off / 1=On */ + +/* B2_BSC_TST 16 bit Blink Source Counter Test Reg */ +#define BSC_T_ON BIT_2S /* Test mode on */ +#define BSC_T_OFF BIT_1S /* Test mode off */ +#define BSC_T_STEP BIT_0S /* Test step */ + + +/* B3_RAM_ADDR 32 bit RAM Address, to read or write */ + /* Bit 31..19: reserved */ +#define RAM_ADR_RAN 0x0007ffffL /* Bit 18.. 0: RAM Address Range */ + +/* RAM Interface Registers */ +/* B3_RI_CTRL 16 bit RAM Iface Control Register */ + /* Bit 15..10: reserved */ +#define RI_CLR_RD_PERR BIT_9S /* Clear IRQ RAM Read Parity Err */ +#define RI_CLR_WR_PERR BIT_8S /* Clear IRQ RAM Write Parity Err*/ + /* Bit 7.. 2: reserved */ +#define RI_RST_CLR BIT_1S /* Clear RAM Interface Reset */ +#define RI_RST_SET BIT_0S /* Set RAM Interface Reset */ + +/* B3_RI_TEST 8 bit RAM Iface Test Register */ + /* Bit 15.. 4: reserved */ +#define RI_T_EV BIT_3S /* Timeout Event occured */ +#define RI_T_ON BIT_2S /* Timeout Timer Test On */ +#define RI_T_OFF BIT_1S /* Timeout Timer Test Off */ +#define RI_T_STEP BIT_0S /* Timeout Timer Step */ + +/* MAC Arbiter Registers */ +/* B3_MA_TO_CTRL 16 bit MAC Arbiter Timeout Ctrl Reg */ + /* Bit 15.. 4: reserved */ +#define MA_FOE_ON BIT_3S /* XMAC Fast Output Enable ON */ +#define MA_FOE_OFF BIT_2S /* XMAC Fast Output Enable OFF */ +#define MA_RST_CLR BIT_1S /* Clear MAC Arbiter Reset */ +#define MA_RST_SET BIT_0S /* Set MAC Arbiter Reset */ + +/* B3_MA_RC_CTRL 16 bit MAC Arbiter Recovery Ctrl Reg */ + /* Bit 15.. 8: reserved */ +#define MA_ENA_REC_TX2 BIT_7S /* Enable Recovery Timer TX2 */ +#define MA_DIS_REC_TX2 BIT_6S /* Disable Recovery Timer TX2 */ +#define MA_ENA_REC_TX1 BIT_5S /* Enable Recovery Timer TX1 */ +#define MA_DIS_REC_TX1 BIT_4S /* Disable Recovery Timer TX1 */ +#define MA_ENA_REC_RX2 BIT_3S /* Enable Recovery Timer RX2 */ +#define MA_DIS_REC_RX2 BIT_2S /* Disable Recovery Timer RX2 */ +#define MA_ENA_REC_RX1 BIT_1S /* Enable Recovery Timer RX1 */ +#define MA_DIS_REC_RX1 BIT_0S /* Disable Recovery Timer RX1 */ + +/* Packet Arbiter Registers */ +/* B3_PA_CTRL 16 bit Packet Arbiter Ctrl Register */ + /* Bit 15..14: reserved */ +#define PA_CLR_TO_TX2 BIT_13S /* Clear IRQ Packet Timeout TX2 */ +#define PA_CLR_TO_TX1 BIT_12S /* Clear IRQ Packet Timeout TX1 */ +#define PA_CLR_TO_RX2 BIT_11S /* Clear IRQ Packet Timeout RX2 */ +#define PA_CLR_TO_RX1 BIT_10S /* Clear IRQ Packet Timeout RX1 */ +#define PA_ENA_TO_TX2 BIT_9S /* Enable Timeout Timer TX2 */ +#define PA_DIS_TO_TX2 BIT_8S /* Disable Timeout Timer TX2 */ +#define PA_ENA_TO_TX1 BIT_7S /* Enable Timeout Timer TX1 */ +#define PA_DIS_TO_TX1 BIT_6S /* Disable Timeout Timer TX1 */ +#define PA_ENA_TO_RX2 BIT_5S /* Enable Timeout Timer RX2 */ +#define PA_DIS_TO_RX2 BIT_4S /* Disable Timeout Timer RX2 */ +#define PA_ENA_TO_RX1 BIT_3S /* Enable Timeout Timer RX1 */ +#define PA_DIS_TO_RX1 BIT_2S /* Disable Timeout Timer RX1 */ +#define PA_RST_CLR BIT_1S /* Clear MAC Arbiter Reset */ +#define PA_RST_SET BIT_0S /* Set MAC Arbiter Reset */ + +#define PA_ENA_TO_ALL (PA_ENA_TO_RX1 | PA_ENA_TO_RX2 |\ + PA_ENA_TO_TX1 | PA_ENA_TO_TX2) + +/* Rx/Tx Path related Arbiter Test Registers */ +/* B3_MA_TO_TEST 16 bit MAC Arbiter Timeout Test Reg */ +/* B3_MA_RC_TEST 16 bit MAC Arbiter Recovery Test Reg */ +/* B3_PA_TEST 16 bit Packet Arbiter Test Register */ +/* Bit 15, 11, 7, and 3 are reserved in B3_PA_TEST */ +#define TX2_T_EV BIT_15S /* TX2 Timeout/Recv Event occured */ +#define TX2_T_ON BIT_14S /* TX2 Timeout/Recv Timer Test On */ +#define TX2_T_OFF BIT_13S /* TX2 Timeout/Recv Timer Tst Off */ +#define TX2_T_STEP BIT_12S /* TX2 Timeout/Recv Timer Step */ +#define TX1_T_EV BIT_11S /* TX1 Timeout/Recv Event occured */ +#define TX1_T_ON BIT_10S /* TX1 Timeout/Recv Timer Test On */ +#define TX1_T_OFF BIT_9S /* TX1 Timeout/Recv Timer Tst Off */ +#define TX1_T_STEP BIT_8S /* TX1 Timeout/Recv Timer Step */ +#define RX2_T_EV BIT_7S /* RX2 Timeout/Recv Event occured */ +#define RX2_T_ON BIT_6S /* RX2 Timeout/Recv Timer Test On */ +#define RX2_T_OFF BIT_5S /* RX2 Timeout/Recv Timer Tst Off */ +#define RX2_T_STEP BIT_4S /* RX2 Timeout/Recv Timer Step */ +#define RX1_T_EV BIT_3S /* RX1 Timeout/Recv Event occured */ +#define RX1_T_ON BIT_2S /* RX1 Timeout/Recv Timer Test On */ +#define RX1_T_OFF BIT_1S /* RX1 Timeout/Recv Timer Tst Off */ +#define RX1_T_STEP BIT_0S /* RX1 Timeout/Recv Timer Step */ + + +/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */ +/* TXA_ITI_INI 32 bit Tx Arb Interval Timer Init Val */ +/* TXA_ITI_VAL 32 bit Tx Arb Interval Timer Value */ +/* TXA_LIM_INI 32 bit Tx Arb Limit Counter Init Val */ +/* TXA_LIM_VAL 32 bit Tx Arb Limit Counter Value */ + /* Bit 31..24: reserved */ +#define TXA_MAX_VAL 0x00ffffffL /* Bit 23.. 0: Max TXA Timer/Cnt Val */ + +/* TXA_CTRL 8 bit Tx Arbiter Control Register */ +#define TXA_ENA_FSYNC BIT_7S /* Enable force of sync Tx queue */ +#define TXA_DIS_FSYNC BIT_6S /* Disable force of sync Tx queue */ +#define TXA_ENA_ALLOC BIT_5S /* Enable alloc of free bandwidth */ +#define TXA_DIS_ALLOC BIT_4S /* Disable alloc of free bandwidth */ +#define TXA_START_RC BIT_3S /* Start sync Rate Control */ +#define TXA_STOP_RC BIT_2S /* Stop sync Rate Control */ +#define TXA_ENA_ARB BIT_1S /* Enable Tx Arbiter */ +#define TXA_DIS_ARB BIT_0S /* Disable Tx Arbiter */ + +/* TXA_TEST 8 bit Tx Arbiter Test Register */ + /* Bit 7.. 6: reserved */ +#define TXA_INT_T_ON BIT_5S /* Tx Arb Interval Timer Test On */ +#define TXA_INT_T_OFF BIT_4S /* Tx Arb Interval Timer Test Off */ +#define TXA_INT_T_STEP BIT_3S /* Tx Arb Interval Timer Step */ +#define TXA_LIM_T_ON BIT_2S /* Tx Arb Limit Timer Test On */ +#define TXA_LIM_T_OFF BIT_1S /* Tx Arb Limit Timer Test Off */ +#define TXA_LIM_T_STEP BIT_0S /* Tx Arb Limit Timer Step */ + +/* TXA_STAT 8 bit Tx Arbiter Status Register */ + /* Bit 7.. 1: reserved */ +#define TXA_PRIO_XS BIT_0S /* sync queue has prio to send */ + +/* Q_BC 32 bit Current Byte Counter */ + /* Bit 31..16: reserved */ +#define BC_MAX 0xffff /* Bit 15.. 0: Byte counter */ + +/* BMU Control Status Registers */ +/* B0_R1_CSR 32 bit BMU Ctrl/Stat Rx Queue 1 */ +/* B0_R2_CSR 32 bit BMU Ctrl/Stat Rx Queue 2 */ +/* B0_XA1_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 1 */ +/* B0_XS1_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 1 */ +/* B0_XA2_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 2 */ +/* B0_XS2_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 2 */ +/* Q_CSR 32 bit BMU Control/Status Register */ + /* Bit 31..25: reserved */ +#define CSR_SV_IDLE BIT_24 /* BMU SM Idle */ + /* Bit 23..22: reserved */ +#define CSR_DESC_CLR BIT_21 /* Clear Reset for Descr */ +#define CSR_DESC_SET BIT_20 /* Set Reset for Descr */ +#define CSR_FIFO_CLR BIT_19 /* Clear Reset for FIFO */ +#define CSR_FIFO_SET BIT_18 /* Set Reset for FIFO */ +#define CSR_HPI_RUN BIT_17 /* Release HPI SM */ +#define CSR_HPI_RST BIT_16 /* Reset HPI SM to Idle */ +#define CSR_SV_RUN BIT_15 /* Release Supervisor SM */ +#define CSR_SV_RST BIT_14 /* Reset Supervisor SM */ +#define CSR_DREAD_RUN BIT_13 /* Release Descr Read SM */ +#define CSR_DREAD_RST BIT_12 /* Reset Descr Read SM */ +#define CSR_DWRITE_RUN BIT_11 /* Release Descr Write SM */ +#define CSR_DWRITE_RST BIT_10 /* Reset Descr Write SM */ +#define CSR_TRANS_RUN BIT_9 /* Release Transfer SM */ +#define CSR_TRANS_RST BIT_8 /* Reset Transfer SM */ +#define CSR_ENA_POL BIT_7 /* Enable Descr Polling */ +#define CSR_DIS_POL BIT_6 /* Disable Descr Polling */ +#define CSR_STOP BIT_5 /* Stop Rx/Tx Queue */ +#define CSR_START BIT_4 /* Start Rx/Tx Queue */ +#define CSR_IRQ_CL_P BIT_3 /* (Rx) Clear Parity IRQ */ +#define CSR_IRQ_CL_B BIT_2 /* Clear EOB IRQ */ +#define CSR_IRQ_CL_F BIT_1 /* Clear EOF IRQ */ +#define CSR_IRQ_CL_C BIT_0 /* Clear ERR IRQ */ + +#define CSR_SET_RESET (CSR_DESC_SET | CSR_FIFO_SET | CSR_HPI_RST |\ + CSR_SV_RST | CSR_DREAD_RST | CSR_DWRITE_RST |\ + CSR_TRANS_RST) +#define CSR_CLR_RESET (CSR_DESC_CLR | CSR_FIFO_CLR | CSR_HPI_RUN |\ + CSR_SV_RUN | CSR_DREAD_RUN | CSR_DWRITE_RUN |\ + CSR_TRANS_RUN) + +/* Q_F 32 bit Flag Register */ + /* Bit 31..28: reserved */ +#define F_ALM_FULL BIT_27 /* Rx FIFO: almost full */ +#define F_EMPTY BIT_27 /* Tx FIFO: empty flag */ +#define F_FIFO_EOF BIT_26 /* Tag (EOF Flag) bit in FIFO */ +#define F_WM_REACHED BIT_25 /* Watermark reached */ + /* reserved */ +#define F_FIFO_LEVEL (0x1fL<<16) /* Bit 23..16: # of Qwords in FIFO */ + /* Bit 15..11: reserved */ +#define F_WATER_MARK 0x0007ffL /* Bit 10.. 0: Watermark */ + +/* Q_T1 32 bit Test Register 1 */ +/* Holds four State Machine control Bytes */ +#define SM_CRTL_SV_MSK (0xffL<<24) /* Bit 31..24: Control Supervisor SM */ +#define SM_CRTL_RD_MSK (0xffL<<16) /* Bit 23..16: Control Read Desc SM */ +#define SM_CRTL_WR_MSK (0xffL<<8) /* Bit 15.. 8: Control Write Desc SM */ +#define SM_CRTL_TR_MSK 0xffL /* Bit 7.. 0: Control Transfer SM */ + +/* Q_T1_TR 8 bit Test Register 1 Transfer SM */ +/* Q_T1_WR 8 bit Test Register 1 Write Descriptor SM */ +/* Q_T1_RD 8 bit Test Register 1 Read Descriptor SM */ +/* Q_T1_SV 8 bit Test Register 1 Supervisor SM */ + +/* The control status byte of each machine looks like ... */ +#define SM_STATE 0xf0 /* Bit 7.. 4: State which shall be loaded */ +#define SM_LOAD BIT_3S /* Load the SM with SM_STATE */ +#define SM_TEST_ON BIT_2S /* Switch on SM Test Mode */ +#define SM_TEST_OFF BIT_1S /* Go off the Test Mode */ +#define SM_STEP BIT_0S /* Step the State Machine */ +/* The encoding of the states is not supported by the Diagnostics Tool */ + +/* Q_T2 32 bit Test Register 2 */ + /* Bit 31.. 8: reserved */ +#define T2_AC_T_ON BIT_7 /* Address Counter Test Mode on */ +#define T2_AC_T_OFF BIT_6 /* Address Counter Test Mode off */ +#define T2_BC_T_ON BIT_5 /* Byte Counter Test Mode on */ +#define T2_BC_T_OFF BIT_4 /* Byte Counter Test Mode off */ +#define T2_STEP04 BIT_3 /* Inc AC/Dec BC by 4 */ +#define T2_STEP03 BIT_2 /* Inc AC/Dec BC by 3 */ +#define T2_STEP02 BIT_1 /* Inc AC/Dec BC by 2 */ +#define T2_STEP01 BIT_0 /* Inc AC/Dec BC by 1 */ + +/* Q_T3 32 bit Test Register 3 */ + /* Bit 31.. 7: reserved */ +#define T3_MUX_MSK (7<<4) /* Bit 6.. 4: Mux Position */ + /* Bit 3: reserved */ +#define T3_VRAM_MSK 7 /* Bit 2.. 0: Virtual RAM Buffer Address */ + +/* RAM Buffer Register Offsets, use RB_ADDR(Queue, Offs) to access */ +/* RB_START 32 bit RAM Buffer Start Address */ +/* RB_END 32 bit RAM Buffer End Address */ +/* RB_WP 32 bit RAM Buffer Write Pointer */ +/* RB_RP 32 bit RAM Buffer Read Pointer */ +/* RB_RX_UTPP 32 bit Rx Upper Threshold, Pause Pack */ +/* RB_RX_LTPP 32 bit Rx Lower Threshold, Pause Pack */ +/* RB_RX_UTHP 32 bit Rx Upper Threshold, High Prio */ +/* RB_RX_LTHP 32 bit Rx Lower Threshold, High Prio */ +/* RB_PC 32 bit RAM Buffer Packet Counter */ +/* RB_LEV 32 bit RAM Buffer Level Register */ + /* Bit 31..19: reserved */ +#define RB_MSK 0x0007ffff /* Bit 18.. 0: RAM Buffer Pointer Bits */ + +/* RB_TST2 8 bit RAM Buffer Test Register 2 */ + /* Bit 7.. 4: reserved */ +#define RB_PC_DEC BIT_3S /* Packet Counter Decrem */ +#define RB_PC_T_ON BIT_2S /* Packet Counter Test On */ +#define RB_PC_T_OFF BIT_1S /* Packet Counter Tst Off */ +#define RB_PC_INC BIT_0S /* Packet Counter Increm */ + +/* RB_TST1 8 bit RAM Buffer Test Register 1 */ + /* Bit 7: reserved */ +#define RB_WP_T_ON BIT_6S /* Write Pointer Test On */ +#define RB_WP_T_OFF BIT_5S /* Write Pointer Test Off */ +#define RB_WP_INC BIT_4S /* Write Pointer Increm */ + /* Bit 3: reserved */ +#define RB_RP_T_ON BIT_2S /* Read Pointer Test On */ +#define RB_RP_T_OFF BIT_1S /* Read Pointer Test Off */ +#define RB_RP_DEC BIT_0S /* Read Pointer Decrement */ + +/* RB_CTRL 8 bit RAM Buffer Control Register */ + /* Bit 7.. 6: reserved */ +#define RB_ENA_STFWD BIT_5S /* Enable Store & Forward */ +#define RB_DIS_STFWD BIT_4S /* Disable Store & Forward */ +#define RB_ENA_OP_MD BIT_3S /* Enable Operation Mode */ +#define RB_DIS_OP_MD BIT_2S /* Disable Operation Mode */ +#define RB_RST_CLR BIT_1S /* Clear RAM Buf STM Reset */ +#define RB_RST_SET BIT_0S /* Set RAM Buf STM Reset */ + + +/* Receive and Transmit MAC FIFO Registers (GENESIS only) */ + +/* RX_MFF_EA 32 bit Receive MAC FIFO End Address */ +/* RX_MFF_WP 32 bit Receive MAC FIFO Write Pointer */ +/* RX_MFF_RP 32 bit Receive MAC FIFO Read Pointer */ +/* RX_MFF_PC 32 bit Receive MAC FIFO Packet Counter */ +/* RX_MFF_LEV 32 bit Receive MAC FIFO Level */ +/* TX_MFF_EA 32 bit Transmit MAC FIFO End Address */ +/* TX_MFF_WP 32 bit Transmit MAC FIFO Write Pointer */ +/* TX_MFF_WSP 32 bit Transmit MAC FIFO WR Shadow Pointer */ +/* TX_MFF_RP 32 bit Transmit MAC FIFO Read Pointer */ +/* TX_MFF_PC 32 bit Transmit MAC FIFO Packet Cnt */ +/* TX_MFF_LEV 32 bit Transmit MAC FIFO Level */ + /* Bit 31.. 6: reserved */ +#define MFF_MSK 0x007fL /* Bit 5.. 0: MAC FIFO Address/Ptr Bits */ + +/* RX_MFF_CTRL1 16 bit Receive MAC FIFO Control Reg 1 */ + /* Bit 15..14: reserved */ +#define MFF_ENA_RDY_PAT BIT_13S /* Enable Ready Patch */ +#define MFF_DIS_RDY_PAT BIT_12S /* Disable Ready Patch */ +#define MFF_ENA_TIM_PAT BIT_11S /* Enable Timing Patch */ +#define MFF_DIS_TIM_PAT BIT_10S /* Disable Timing Patch */ +#define MFF_ENA_ALM_FUL BIT_9S /* Enable AlmostFull Sign */ +#define MFF_DIS_ALM_FUL BIT_8S /* Disable AlmostFull Sign */ +#define MFF_ENA_PAUSE BIT_7S /* Enable Pause Signaling */ +#define MFF_DIS_PAUSE BIT_6S /* Disable Pause Signaling */ +#define MFF_ENA_FLUSH BIT_5S /* Enable Frame Flushing */ +#define MFF_DIS_FLUSH BIT_4S /* Disable Frame Flushing */ +#define MFF_ENA_TIST BIT_3S /* Enable Time Stamp Gener */ +#define MFF_DIS_TIST BIT_2S /* Disable Time Stamp Gener */ +#define MFF_CLR_INTIST BIT_1S /* Clear IRQ No Time Stamp */ +#define MFF_CLR_INSTAT BIT_0S /* Clear IRQ No Status */ + +#define MFF_RX_CTRL_DEF MFF_ENA_TIM_PAT + +/* TX_MFF_CTRL1 16 bit Transmit MAC FIFO Control Reg 1 */ +#define MFF_CLR_PERR BIT_15S /* Clear Parity Error IRQ */ + /* Bit 14: reserved */ +#define MFF_ENA_PKT_REC BIT_13S /* Enable Packet Recovery */ +#define MFF_DIS_PKT_REC BIT_12S /* Disable Packet Recovery */ +/* MFF_ENA_TIM_PAT (see RX_MFF_CTRL1) Bit 11: Enable Timing Patch */ +/* MFF_DIS_TIM_PAT (see RX_MFF_CTRL1) Bit 10: Disable Timing Patch */ +/* MFF_ENA_ALM_FUL (see RX_MFF_CTRL1) Bit 9: Enable Almost Full Sign */ +/* MFF_DIS_ALM_FUL (see RX_MFF_CTRL1) Bit 8: Disable Almost Full Sign */ +#define MFF_ENA_W4E BIT_7S /* Enable Wait for Empty */ +#define MFF_DIS_W4E BIT_6S /* Disable Wait for Empty */ +/* MFF_ENA_FLUSH (see RX_MFF_CTRL1) Bit 5: Enable Frame Flushing */ +/* MFF_DIS_FLUSH (see RX_MFF_CTRL1) Bit 4: Disable Frame Flushing */ +#define MFF_ENA_LOOPB BIT_3S /* Enable Loopback */ +#define MFF_DIS_LOOPB BIT_2S /* Disable Loopback */ +#define MFF_CLR_MAC_RST BIT_1S /* Clear XMAC Reset */ +#define MFF_SET_MAC_RST BIT_0S /* Set XMAC Reset */ + +#define MFF_TX_CTRL_DEF (MFF_ENA_PKT_REC | MFF_ENA_TIM_PAT | MFF_ENA_FLUSH) + +/* RX_MFF_TST2 8 bit Receive MAC FIFO Test Register 2 */ +/* TX_MFF_TST2 8 bit Transmit MAC FIFO Test Register 2 */ + /* Bit 7: reserved */ +#define MFF_WSP_T_ON BIT_6S /* Tx: Write Shadow Ptr TestOn */ +#define MFF_WSP_T_OFF BIT_5S /* Tx: Write Shadow Ptr TstOff */ +#define MFF_WSP_INC BIT_4S /* Tx: Write Shadow Ptr Increment */ +#define MFF_PC_DEC BIT_3S /* Packet Counter Decrement */ +#define MFF_PC_T_ON BIT_2S /* Packet Counter Test On */ +#define MFF_PC_T_OFF BIT_1S /* Packet Counter Test Off */ +#define MFF_PC_INC BIT_0S /* Packet Counter Increment */ + +/* RX_MFF_TST1 8 bit Receive MAC FIFO Test Register 1 */ +/* TX_MFF_TST1 8 bit Transmit MAC FIFO Test Register 1 */ + /* Bit 7: reserved */ +#define MFF_WP_T_ON BIT_6S /* Write Pointer Test On */ +#define MFF_WP_T_OFF BIT_5S /* Write Pointer Test Off */ +#define MFF_WP_INC BIT_4S /* Write Pointer Increm */ + /* Bit 3: reserved */ +#define MFF_RP_T_ON BIT_2S /* Read Pointer Test On */ +#define MFF_RP_T_OFF BIT_1S /* Read Pointer Test Off */ +#define MFF_RP_DEC BIT_0S /* Read Pointer Decrement */ + +/* RX_MFF_CTRL2 8 bit Receive MAC FIFO Control Reg 2 */ +/* TX_MFF_CTRL2 8 bit Transmit MAC FIFO Control Reg 2 */ + /* Bit 7..4: reserved */ +#define MFF_ENA_OP_MD BIT_3S /* Enable Operation Mode */ +#define MFF_DIS_OP_MD BIT_2S /* Disable Operation Mode */ +#define MFF_RST_CLR BIT_1S /* Clear MAC FIFO Reset */ +#define MFF_RST_SET BIT_0S /* Set MAC FIFO Reset */ + + +/* Link LED Counter Registers (GENESIS only) */ + +/* RX_LED_CTRL 8 bit Receive LED Cnt Control Reg */ +/* TX_LED_CTRL 8 bit Transmit LED Cnt Control Reg */ +/* LNK_SYNC_CTRL 8 bit Link Sync Cnt Control Register */ + /* Bit 7.. 3: reserved */ +#define LED_START BIT_2S /* Start Timer */ +#define LED_STOP BIT_1S /* Stop Timer */ +#define LED_STATE BIT_0S /* Rx/Tx: LED State, 1=LED on */ +#define LED_CLR_IRQ BIT_0S /* Lnk: Clear Link IRQ */ + +/* RX_LED_TST 8 bit Receive LED Cnt Test Register */ +/* TX_LED_TST 8 bit Transmit LED Cnt Test Register */ +/* LNK_SYNC_TST 8 bit Link Sync Cnt Test Register */ + /* Bit 7.. 3: reserved */ +#define LED_T_ON BIT_2S /* LED Counter Test mode On */ +#define LED_T_OFF BIT_1S /* LED Counter Test mode Off */ +#define LED_T_STEP BIT_0S /* LED Counter Step */ + +/* LNK_LED_REG 8 bit Link LED Register */ + /* Bit 7.. 6: reserved */ +#define LED_BLK_ON BIT_5S /* Link LED Blinking On */ +#define LED_BLK_OFF BIT_4S /* Link LED Blinking Off */ +#define LED_SYNC_ON BIT_3S /* Use Sync Wire to switch LED */ +#define LED_SYNC_OFF BIT_2S /* Disable Sync Wire Input */ +#define LED_ON BIT_1S /* switch LED on */ +#define LED_OFF BIT_0S /* switch LED off */ + +/* Receive and Transmit GMAC FIFO Registers (YUKON only) */ + +/* RX_GMF_EA 32 bit Rx GMAC FIFO End Address */ +/* RX_GMF_AF_THR 32 bit Rx GMAC FIFO Almost Full Thresh. */ +/* RX_GMF_WP 32 bit Rx GMAC FIFO Write Pointer */ +/* RX_GMF_WLEV 32 bit Rx GMAC FIFO Write Level */ +/* RX_GMF_RP 32 bit Rx GMAC FIFO Read Pointer */ +/* RX_GMF_RLEV 32 bit Rx GMAC FIFO Read Level */ +/* TX_GMF_EA 32 bit Tx GMAC FIFO End Address */ +/* TX_GMF_AE_THR 32 bit Tx GMAC FIFO Almost Empty Thresh.*/ +/* TX_GMF_WP 32 bit Tx GMAC FIFO Write Pointer */ +/* TX_GMF_WSP 32 bit Tx GMAC FIFO Write Shadow Ptr. */ +/* TX_GMF_WLEV 32 bit Tx GMAC FIFO Write Level */ +/* TX_GMF_RP 32 bit Tx GMAC FIFO Read Pointer */ +/* TX_GMF_RSTP 32 bit Tx GMAC FIFO Restart Pointer */ +/* TX_GMF_RLEV 32 bit Tx GMAC FIFO Read Level */ + +/* RX_GMF_CTRL_T 32 bit Rx GMAC FIFO Control/Test */ + /* Bits 31..15: reserved */ +#define GMF_WP_TST_ON BIT_14 /* Write Pointer Test On */ +#define GMF_WP_TST_OFF BIT_13 /* Write Pointer Test Off */ +#define GMF_WP_STEP BIT_12 /* Write Pointer Step/Increment */ + /* Bit 11: reserved */ +#define GMF_RP_TST_ON BIT_10 /* Read Pointer Test On */ +#define GMF_RP_TST_OFF BIT_9 /* Read Pointer Test Off */ +#define GMF_RP_STEP BIT_8 /* Read Pointer Step/Increment */ +#define GMF_RX_F_FL_ON BIT_7 /* Rx FIFO Flush Mode On */ +#define GMF_RX_F_FL_OFF BIT_6 /* Rx FIFO Flush Mode Off */ +#define GMF_CLI_RX_FO BIT_5 /* Clear IRQ Rx FIFO Overrun */ +#define GMF_CLI_RX_FC BIT_4 /* Clear IRQ Rx Frame Complete */ +#define GMF_OPER_ON BIT_3 /* Operational Mode On */ +#define GMF_OPER_OFF BIT_2 /* Operational Mode Off */ +#define GMF_RST_CLR BIT_1 /* Clear GMAC FIFO Reset */ +#define GMF_RST_SET BIT_0 /* Set GMAC FIFO Reset */ + +/* TX_GMF_CTRL_T 32 bit Tx GMAC FIFO Control/Test */ + /* Bits 31..19: reserved */ +#define GMF_WSP_TST_ON BIT_18 /* Write Shadow Pointer Test On */ +#define GMF_WSP_TST_OFF BIT_17 /* Write Shadow Pointer Test Off */ +#define GMF_WSP_STEP BIT_16 /* Write Shadow Pointer Step/Increment */ + /* Bits 15..7: same as for RX_GMF_CTRL_T */ +#define GMF_CLI_TX_FU BIT_6 /* Clear IRQ Tx FIFO Underrun */ +#define GMF_CLI_TX_FC BIT_5 /* Clear IRQ Tx Frame Complete */ +#define GMF_CLI_TX_PE BIT_4 /* Clear IRQ Tx Parity Error */ + /* Bits 3..0: same as for RX_GMF_CTRL_T */ + +#define GMF_RX_CTRL_DEF (GMF_OPER_ON | GMF_RX_F_FL_ON) +#define GMF_TX_CTRL_DEF GMF_OPER_ON + +#define RX_GMF_FL_THR_DEF 0x0a /* Rx GMAC FIFO Flush Threshold default */ + +/* GMAC_TI_ST_CTRL 8 bit Time Stamp Timer Ctrl Reg (YUKON only) */ + /* Bit 7.. 3: reserved */ +#define GMT_ST_START BIT_2S /* Start Time Stamp Timer */ +#define GMT_ST_STOP BIT_1S /* Stop Time Stamp Timer */ +#define GMT_ST_CLR_IRQ BIT_0S /* Clear Time Stamp Timer IRQ */ + +/* GMAC_CTRL 32 bit GMAC Control Reg (YUKON only) */ + /* Bits 31.. 8: reserved */ +#define GMC_H_BURST_ON BIT_7 /* Half Duplex Burst Mode On */ +#define GMC_H_BURST_OFF BIT_6 /* Half Duplex Burst Mode Off */ +#define GMC_F_LOOPB_ON BIT_5 /* FIFO Loopback On */ +#define GMC_F_LOOPB_OFF BIT_4 /* FIFO Loopback Off */ +#define GMC_PAUSE_ON BIT_3 /* Pause On */ +#define GMC_PAUSE_OFF BIT_2 /* Pause Off */ +#define GMC_RST_CLR BIT_1 /* Clear GMAC Reset */ +#define GMC_RST_SET BIT_0 /* Set GMAC Reset */ + +/* GPHY_CTRL 32 bit GPHY Control Reg (YUKON only) */ + /* Bits 31..29: reserved */ +#define GPC_SEL_BDT BIT_28 /* Select Bi-Dir. Transfer for MDC/MDIO */ +#define GPC_INT_POL_HI BIT_27 /* IRQ Polarity is Active HIGH */ +#define GPC_75_OHM BIT_26 /* Use 75 Ohm Termination instead of 50 */ +#define GPC_DIS_FC BIT_25 /* Disable Automatic Fiber/Copper Detection */ +#define GPC_DIS_SLEEP BIT_24 /* Disable Energy Detect */ +#define GPC_HWCFG_M_3 BIT_23 /* HWCFG_MODE[3] */ +#define GPC_HWCFG_M_2 BIT_22 /* HWCFG_MODE[2] */ +#define GPC_HWCFG_M_1 BIT_21 /* HWCFG_MODE[1] */ +#define GPC_HWCFG_M_0 BIT_20 /* HWCFG_MODE[0] */ +#define GPC_ANEG_0 BIT_19 /* ANEG[0] */ +#define GPC_ENA_XC BIT_18 /* Enable MDI crossover */ +#define GPC_DIS_125 BIT_17 /* Disable 125 MHz clock */ +#define GPC_ANEG_3 BIT_16 /* ANEG[3] */ +#define GPC_ANEG_2 BIT_15 /* ANEG[2] */ +#define GPC_ANEG_1 BIT_14 /* ANEG[1] */ +#define GPC_ENA_PAUSE BIT_13 /* Enable Pause (SYM_OR_REM) */ +#define GPC_PHYADDR_4 BIT_12 /* Bit 4 of Phy Addr */ +#define GPC_PHYADDR_3 BIT_11 /* Bit 3 of Phy Addr */ +#define GPC_PHYADDR_2 BIT_10 /* Bit 2 of Phy Addr */ +#define GPC_PHYADDR_1 BIT_9 /* Bit 1 of Phy Addr */ +#define GPC_PHYADDR_0 BIT_8 /* Bit 0 of Phy Addr */ + /* Bits 7..2: reserved */ +#define GPC_RST_CLR BIT_1 /* Clear GPHY Reset */ +#define GPC_RST_SET BIT_0 /* Set GPHY Reset */ + +#define GPC_HWCFG_GMII_COP (GPC_HWCFG_M_3 | GPC_HWCFG_M_2 | \ + GPC_HWCFG_M_1 | GPC_HWCFG_M_0) + +#define GPC_HWCFG_GMII_FIB ( GPC_HWCFG_M_2 | \ + GPC_HWCFG_M_1 | GPC_HWCFG_M_0) + +#define GPC_ANEG_ADV_ALL_M (GPC_ANEG_3 | GPC_ANEG_2 | \ + GPC_ANEG_1 | GPC_ANEG_0) + +/* forced speed and duplex mode (don't mix with other ANEG bits) */ +#define GPC_FRC10MBIT_HALF 0 +#define GPC_FRC10MBIT_FULL GPC_ANEG_0 +#define GPC_FRC100MBIT_HALF GPC_ANEG_1 +#define GPC_FRC100MBIT_FULL (GPC_ANEG_0 | GPC_ANEG_1) + +/* auto-negotiation with limited advertised speeds */ +/* mix only with master/slave settings (for copper) */ +#define GPC_ADV_1000_HALF GPC_ANEG_2 +#define GPC_ADV_1000_FULL GPC_ANEG_3 +#define GPC_ADV_ALL (GPC_ANEG_2 | GPC_ANEG_3) + +/* master/slave settings */ +/* only for copper with 1000 Mbps */ +#define GPC_FORCE_MASTER 0 +#define GPC_FORCE_SLAVE GPC_ANEG_0 +#define GPC_PREF_MASTER GPC_ANEG_1 +#define GPC_PREF_SLAVE (GPC_ANEG_1 | GPC_ANEG_0) + +/* GMAC_IRQ_SRC 8 bit GMAC Interrupt Source Reg (YUKON only) */ +/* GMAC_IRQ_MSK 8 bit GMAC Interrupt Mask Reg (YUKON only) */ +#define GM_IS_TX_CO_OV BIT_5 /* Transmit Counter Overflow IRQ */ +#define GM_IS_RX_CO_OV BIT_4 /* Receive Counter Overflow IRQ */ +#define GM_IS_TX_FF_UR BIT_3 /* Transmit FIFO Underrun */ +#define GM_IS_TX_COMPL BIT_2 /* Frame Transmission Complete */ +#define GM_IS_RX_FF_OR BIT_1 /* Receive FIFO Overrun */ +#define GM_IS_RX_COMPL BIT_0 /* Frame Reception Complete */ + +#define GMAC_DEF_MSK (GM_IS_TX_CO_OV | GM_IS_RX_CO_OV | \ + GM_IS_TX_FF_UR) + +/* GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only) */ + /* Bits 15.. 2: reserved */ +#define GMLC_RST_CLR BIT_1S /* Clear GMAC Link Reset */ +#define GMLC_RST_SET BIT_0S /* Set GMAC Link Reset */ + + +/* WOL_CTRL_STAT 16 bit WOL Control/Status Reg */ +#define WOL_CTL_LINK_CHG_OCC BIT_15S +#define WOL_CTL_MAGIC_PKT_OCC BIT_14S +#define WOL_CTL_PATTERN_OCC BIT_13S + +#define WOL_CTL_CLEAR_RESULT BIT_12S + +#define WOL_CTL_ENA_PME_ON_LINK_CHG BIT_11S +#define WOL_CTL_DIS_PME_ON_LINK_CHG BIT_10S +#define WOL_CTL_ENA_PME_ON_MAGIC_PKT BIT_9S +#define WOL_CTL_DIS_PME_ON_MAGIC_PKT BIT_8S +#define WOL_CTL_ENA_PME_ON_PATTERN BIT_7S +#define WOL_CTL_DIS_PME_ON_PATTERN BIT_6S + +#define WOL_CTL_ENA_LINK_CHG_UNIT BIT_5S +#define WOL_CTL_DIS_LINK_CHG_UNIT BIT_4S +#define WOL_CTL_ENA_MAGIC_PKT_UNIT BIT_3S +#define WOL_CTL_DIS_MAGIC_PKT_UNIT BIT_2S +#define WOL_CTL_ENA_PATTERN_UNIT BIT_1S +#define WOL_CTL_DIS_PATTERN_UNIT BIT_0S + +#define WOL_CTL_DEFAULT \ + (WOL_CTL_DIS_PME_ON_LINK_CHG | \ + WOL_CTL_DIS_PME_ON_PATTERN | \ + WOL_CTL_DIS_PME_ON_MAGIC_PKT | \ + WOL_CTL_DIS_LINK_CHG_UNIT | \ + WOL_CTL_DIS_PATTERN_UNIT | \ + WOL_CTL_DIS_MAGIC_PKT_UNIT) + +/* WOL_MATCH_CTL 8 bit WOL Match Control Reg */ +#define WOL_CTL_PATT_ENA(x) (BIT_0 << (x)) + +#define SK_NUM_WOL_PATTERN 7 +#define SK_PATTERN_PER_WORD 4 +#define SK_BITMASK_PATTERN 7 +#define SK_POW_PATTERN_LENGTH 128 + +#define WOL_LENGTH_MSK 0x7f +#define WOL_LENGTH_SHIFT 8 + + +/* Receive and Transmit Descriptors ******************************************/ + +/* Transmit Descriptor struct */ +typedef struct s_HwTxd { + SK_U32 volatile TxCtrl; /* Transmit Buffer Control Field */ + SK_U32 TxNext; /* Physical Address Pointer to the next TxD */ + SK_U32 TxAdrLo; /* Physical Tx Buffer Address lower dword */ + SK_U32 TxAdrHi; /* Physical Tx Buffer Address upper dword */ + SK_U32 TxStat; /* Transmit Frame Status Word */ +#ifndef SK_USE_REV_DESC + SK_U16 TxTcpOffs; /* TCP Checksum Calculation Start Value */ + SK_U16 TxRes1; /* 16 bit reserved field */ + SK_U16 TxTcpWp; /* TCP Checksum Write Position */ + SK_U16 TxTcpSp; /* TCP Checksum Calculation Start Position */ +#else /* SK_USE_REV_DESC */ + SK_U16 TxRes1; /* 16 bit reserved field */ + SK_U16 TxTcpOffs; /* TCP Checksum Calculation Start Value */ + SK_U16 TxTcpSp; /* TCP Checksum Calculation Start Position */ + SK_U16 TxTcpWp; /* TCP Checksum Write Position */ +#endif /* SK_USE_REV_DESC */ + SK_U32 TxRes2; /* 32 bit reserved field */ +} SK_HWTXD; + +/* Receive Descriptor struct */ +typedef struct s_HwRxd { + SK_U32 volatile RxCtrl; /* Receive Buffer Control Field */ + SK_U32 RxNext; /* Physical Address Pointer to the next RxD */ + SK_U32 RxAdrLo; /* Physical Rx Buffer Address lower dword */ + SK_U32 RxAdrHi; /* Physical Rx Buffer Address upper dword */ + SK_U32 RxStat; /* Receive Frame Status Word */ + SK_U32 RxTiSt; /* Receive Time Stamp (from XMAC on GENESIS) */ +#ifndef SK_USE_REV_DESC + SK_U16 RxTcpSum1; /* TCP Checksum 1 */ + SK_U16 RxTcpSum2; /* TCP Checksum 2 */ + SK_U16 RxTcpSp1; /* TCP Checksum Calculation Start Position 1 */ + SK_U16 RxTcpSp2; /* TCP Checksum Calculation Start Position 2 */ +#else /* SK_USE_REV_DESC */ + SK_U16 RxTcpSum2; /* TCP Checksum 2 */ + SK_U16 RxTcpSum1; /* TCP Checksum 1 */ + SK_U16 RxTcpSp2; /* TCP Checksum Calculation Start Position 2 */ + SK_U16 RxTcpSp1; /* TCP Checksum Calculation Start Position 1 */ +#endif /* SK_USE_REV_DESC */ +} SK_HWRXD; + +/* + * Drivers which use the reverse descriptor feature (PCI_OUR_REG_2) + * should set the define SK_USE_REV_DESC. + * Structures are 'normaly' not endianess dependent. But in + * this case the SK_U16 fields are bound to bit positions inside the + * descriptor. RxTcpSum1 e.g. must start at bit 0 within the 6.th DWord. + * The bit positions inside a DWord are of course endianess dependent and + * swaps if the DWord is swapped by the hardware. + */ + + +/* Descriptor Bit Definition */ +/* TxCtrl Transmit Buffer Control Field */ +/* RxCtrl Receive Buffer Control Field */ +#define BMU_OWN BIT_31 /* OWN bit: 0=host/1=BMU */ +#define BMU_STF BIT_30 /* Start of Frame */ +#define BMU_EOF BIT_29 /* End of Frame */ +#define BMU_IRQ_EOB BIT_28 /* Req "End of Buffer" IRQ */ +#define BMU_IRQ_EOF BIT_27 /* Req "End of Frame" IRQ */ +/* TxCtrl specific bits */ +#define BMU_STFWD BIT_26 /* (Tx) Store & Forward Frame */ +#define BMU_NO_FCS BIT_25 /* (Tx) Disable MAC FCS (CRC) generation */ +#define BMU_SW BIT_24 /* (Tx) 1 bit res. for SW use */ +/* RxCtrl specific bits */ +#define BMU_DEV_0 BIT_26 /* (Rx) Transfer data to Dev0 */ +#define BMU_STAT_VAL BIT_25 /* (Rx) Rx Status Valid */ +#define BMU_TIST_VAL BIT_24 /* (Rx) Rx TimeStamp Valid */ + /* Bit 23..16: BMU Check Opcodes */ +#define BMU_CHECK (0x55L<<16) /* Default BMU check */ +#define BMU_TCP_CHECK (0x56L<<16) /* Descr with TCP ext */ +#define BMU_UDP_CHECK (0x57L<<16) /* Descr with UDP ext (YUKON only) */ +#define BMU_BBC 0xFFFFL /* Bit 15.. 0: Buffer Byte Counter */ + +/* TxStat Transmit Frame Status Word */ +/* RxStat Receive Frame Status Word */ +/* + *Note: TxStat is reserved for ASIC loopback mode only + * + * The Bits of the Status words are defined in xmac_ii.h + * (see XMR_FS bits) + */ + +/* other defines *************************************************************/ + +/* + * FlashProm specification + */ +#define MAX_PAGES 0x20000L /* Every byte has a single page */ +#define MAX_FADDR 1 /* 1 byte per page */ +#define SKFDDI_PSZ 8 /* address PROM size */ + +/* macros ********************************************************************/ + +/* + * Receive and Transmit Queues + */ +#define Q_R1 0x0000 /* Receive Queue 1 */ +#define Q_R2 0x0080 /* Receive Queue 2 */ +#define Q_XS1 0x0200 /* Synchronous Transmit Queue 1 */ +#define Q_XA1 0x0280 /* Asynchronous Transmit Queue 1 */ +#define Q_XS2 0x0300 /* Synchronous Transmit Queue 2 */ +#define Q_XA2 0x0380 /* Asynchronous Transmit Queue 2 */ + +/* + * Macro Q_ADDR() + * + * Use this macro to access the Receive and Transmit Queue Registers. + * + * para: + * Queue Queue to access. + * Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2 + * Offs Queue register offset. + * Values: Q_D, Q_DA_L ... Q_T2, Q_T3 + * + * usage SK_IN32(pAC, Q_ADDR(Q_R2, Q_BC), pVal) + */ +#define Q_ADDR(Queue, Offs) (B8_Q_REGS + (Queue) + (Offs)) + +/* + * Macro RB_ADDR() + * + * Use this macro to access the RAM Buffer Registers. + * + * para: + * Queue Queue to access. + * Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2 + * Offs Queue register offset. + * Values: RB_START, RB_END ... RB_LEV, RB_CTRL + * + * usage SK_IN32(pAC, RB_ADDR(Q_R2, RB_RP), pVal) + */ +#define RB_ADDR(Queue, Offs) (B16_RAM_REGS + (Queue) + (Offs)) + + +/* + * MAC Related Registers + */ +#define MAC_1 0 /* belongs to the port near the slot */ +#define MAC_2 1 /* belongs to the port far away from the slot */ + +/* + * Macro MR_ADDR() + * + * Use this macro to access a MAC Related Registers inside the ASIC. + * + * para: + * Mac MAC to access. + * Values: MAC_1, MAC_2 + * Offs MAC register offset. + * Values: RX_MFF_EA, RX_MFF_WP ... LNK_LED_REG, + * TX_MFF_EA, TX_MFF_WP ... TX_LED_TST + * + * usage SK_IN32(pAC, MR_ADDR(MAC_1, TX_MFF_EA), pVal) + */ +#define MR_ADDR(Mac, Offs) (((Mac) << 7) + (Offs)) + +#ifdef SK_LITTLE_ENDIAN +#define XM_WORD_LO 0 +#define XM_WORD_HI 1 +#else /* !SK_LITTLE_ENDIAN */ +#define XM_WORD_LO 1 +#define XM_WORD_HI 0 +#endif /* !SK_LITTLE_ENDIAN */ + + +/* + * macros to access the XMAC (GENESIS only) + * + * XM_IN16(), to read a 16 bit register (e.g. XM_MMU_CMD) + * XM_OUT16(), to write a 16 bit register (e.g. XM_MMU_CMD) + * XM_IN32(), to read a 32 bit register (e.g. XM_TX_EV_CNT) + * XM_OUT32(), to write a 32 bit register (e.g. XM_TX_EV_CNT) + * XM_INADDR(), to read a network address register (e.g. XM_SRC_CHK) + * XM_OUTADDR(), to write a network address register (e.g. XM_SRC_CHK) + * XM_INHASH(), to read the XM_HSM_CHK register + * XM_OUTHASH() to write the XM_HSM_CHK register + * + * para: + * Mac XMAC to access values: MAC_1 or MAC_2 + * IoC I/O context needed for SK I/O macros + * Reg XMAC Register to read or write + * (p)Val Value or pointer to the value which should be read or written + * + * usage: XM_OUT16(IoC, MAC_1, XM_MMU_CMD, Value); + */ + +#define XMA(Mac, Reg) \ + ((BASE_XMAC_1 + (Mac) * (BASE_XMAC_2 - BASE_XMAC_1)) | ((Reg) << 1)) + +#define XM_IN16(IoC, Mac, Reg, pVal) \ + SK_IN16((IoC), XMA((Mac), (Reg)), (pVal)) + +#define XM_OUT16(IoC, Mac, Reg, Val) \ + SK_OUT16((IoC), XMA((Mac), (Reg)), (Val)) + +#define XM_IN32(IoC, Mac, Reg, pVal) { \ + SK_IN16((IoC), XMA((Mac), (Reg)), \ + (SK_U16 *)&((SK_U16 *)(pVal))[XM_WORD_LO]); \ + SK_IN16((IoC), XMA((Mac), (Reg+2)), \ + (SK_U16 *)&((SK_U16 *)(pVal))[XM_WORD_HI]); \ +} + +#define XM_OUT32(IoC, Mac, Reg, Val) { \ + SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16)((Val) & 0xffffL)); \ + SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16)(((Val) >> 16) & 0xffffL));\ +} + +/* Remember: we are always writing to / reading from LITTLE ENDIAN memory */ + +#define XM_INADDR(IoC, Mac, Reg, pVal) { \ + SK_U16 Word; \ + SK_U8 *pByte; \ + pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \ + SK_IN16((IoC), XMA((Mac), (Reg)), &Word); \ + pByte[0] = (SK_U8)(Word & 0x00ff); \ + pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), XMA((Mac), (Reg+2)), &Word); \ + pByte[2] = (SK_U8)(Word & 0x00ff); \ + pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), XMA((Mac), (Reg+4)), &Word); \ + pByte[4] = (SK_U8)(Word & 0x00ff); \ + pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \ +} + +#define XM_OUTADDR(IoC, Mac, Reg, pVal) { \ + SK_U8 *pByte; \ + pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \ + SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16) \ + (((SK_U16)(pByte[0]) & 0x00ff) | \ + (((SK_U16)(pByte[1]) << 8) & 0xff00))); \ + SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16) \ + (((SK_U16)(pByte[2]) & 0x00ff) | \ + (((SK_U16)(pByte[3]) << 8) & 0xff00))); \ + SK_OUT16((IoC), XMA((Mac), (Reg+4)), (SK_U16) \ + (((SK_U16)(pByte[4]) & 0x00ff) | \ + (((SK_U16)(pByte[5]) << 8) & 0xff00))); \ +} + +#define XM_INHASH(IoC, Mac, Reg, pVal) { \ + SK_U16 Word; \ + SK_U8 *pByte; \ + pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \ + SK_IN16((IoC), XMA((Mac), (Reg)), &Word); \ + pByte[0] = (SK_U8)(Word & 0x00ff); \ + pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), XMA((Mac), (Reg+2)), &Word); \ + pByte[2] = (SK_U8)(Word & 0x00ff); \ + pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), XMA((Mac), (Reg+4)), &Word); \ + pByte[4] = (SK_U8)(Word & 0x00ff); \ + pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), XMA((Mac), (Reg+6)), &Word); \ + pByte[6] = (SK_U8)(Word & 0x00ff); \ + pByte[7] = (SK_U8)((Word >> 8) & 0x00ff); \ +} + +#define XM_OUTHASH(IoC, Mac, Reg, pVal) { \ + SK_U8 *pByte; \ + pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \ + SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16) \ + (((SK_U16)(pByte[0]) & 0x00ff)| \ + (((SK_U16)(pByte[1]) << 8) & 0xff00))); \ + SK_OUT16((IoC), XMA((Mac), (Reg+2)), (SK_U16) \ + (((SK_U16)(pByte[2]) & 0x00ff)| \ + (((SK_U16)(pByte[3]) << 8) & 0xff00))); \ + SK_OUT16((IoC), XMA((Mac), (Reg+4)), (SK_U16) \ + (((SK_U16)(pByte[4]) & 0x00ff)| \ + (((SK_U16)(pByte[5]) << 8) & 0xff00))); \ + SK_OUT16((IoC), XMA((Mac), (Reg+6)), (SK_U16) \ + (((SK_U16)(pByte[6]) & 0x00ff)| \ + (((SK_U16)(pByte[7]) << 8) & 0xff00))); \ +} + +/* + * macros to access the GMAC (YUKON only) + * + * GM_IN16(), to read a 16 bit register (e.g. GM_GP_STAT) + * GM_OUT16(), to write a 16 bit register (e.g. GM_GP_CTRL) + * GM_IN32(), to read a 32 bit register (e.g. GM_) + * GM_OUT32(), to write a 32 bit register (e.g. GM_) + * GM_INADDR(), to read a network address register (e.g. GM_SRC_ADDR_1L) + * GM_OUTADDR(), to write a network address register (e.g. GM_SRC_ADDR_2L) + * GM_INHASH(), to read the GM_MC_ADDR_H1 register + * GM_OUTHASH() to write the GM_MC_ADDR_H1 register + * + * para: + * Mac GMAC to access values: MAC_1 or MAC_2 + * IoC I/O context needed for SK I/O macros + * Reg GMAC Register to read or write + * (p)Val Value or pointer to the value which should be read or written + * + * usage: GM_OUT16(IoC, MAC_1, GM_GP_CTRL, Value); + */ + +#define GMA(Mac, Reg) \ + ((BASE_GMAC_1 + (Mac) * (BASE_GMAC_2 - BASE_GMAC_1)) | (Reg)) + +#define GM_IN16(IoC, Mac, Reg, pVal) \ + SK_IN16((IoC), GMA((Mac), (Reg)), (pVal)) + +#define GM_OUT16(IoC, Mac, Reg, Val) \ + SK_OUT16((IoC), GMA((Mac), (Reg)), (Val)) + +#define GM_IN32(IoC, Mac, Reg, pVal) { \ + SK_IN16((IoC), GMA((Mac), (Reg)), \ + (SK_U16 *)&((SK_U16 *)(pVal))[XM_WORD_LO]); \ + SK_IN16((IoC), GMA((Mac), (Reg+4)), \ + (SK_U16 *)&((SK_U16 *)(pVal))[XM_WORD_HI]); \ +} + +#define GM_OUT32(IoC, Mac, Reg, Val) { \ + SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16)((Val) & 0xffffL)); \ + SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16)(((Val) >> 16) & 0xffffL));\ +} + +#define GM_INADDR(IoC, Mac, Reg, pVal) { \ + SK_U16 Word; \ + SK_U8 *pByte; \ + pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \ + SK_IN16((IoC), GMA((Mac), (Reg)), &Word); \ + pByte[0] = (SK_U8)(Word & 0x00ff); \ + pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), GMA((Mac), (Reg+4)), &Word); \ + pByte[2] = (SK_U8)(Word & 0x00ff); \ + pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), GMA((Mac), (Reg+8)), &Word); \ + pByte[4] = (SK_U8)(Word & 0x00ff); \ + pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \ +} + +#define GM_OUTADDR(IoC, Mac, Reg, pVal) { \ + SK_U8 *pByte; \ + pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \ + SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16) \ + (((SK_U16)(pByte[0]) & 0x00ff) | \ + (((SK_U16)(pByte[1]) << 8) & 0xff00))); \ + SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16) \ + (((SK_U16)(pByte[2]) & 0x00ff) | \ + (((SK_U16)(pByte[3]) << 8) & 0xff00))); \ + SK_OUT16((IoC), GMA((Mac), (Reg+8)), (SK_U16) \ + (((SK_U16)(pByte[4]) & 0x00ff) | \ + (((SK_U16)(pByte[5]) << 8) & 0xff00))); \ +} + +#define GM_INHASH(IoC, Mac, Reg, pVal) { \ + SK_U16 Word; \ + SK_U8 *pByte; \ + pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \ + SK_IN16((IoC), GMA((Mac), (Reg)), &Word); \ + pByte[0] = (SK_U8)(Word & 0x00ff); \ + pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), GMA((Mac), (Reg+4)), &Word); \ + pByte[2] = (SK_U8)(Word & 0x00ff); \ + pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), GMA((Mac), (Reg+8)), &Word); \ + pByte[4] = (SK_U8)(Word & 0x00ff); \ + pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \ + SK_IN16((IoC), GMA((Mac), (Reg+12)), &Word); \ + pByte[6] = (SK_U8)(Word & 0x00ff); \ + pByte[7] = (SK_U8)((Word >> 8) & 0x00ff); \ +} + +#define GM_OUTHASH(IoC, Mac, Reg, pVal) { \ + SK_U8 *pByte; \ + pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \ + SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16) \ + (((SK_U16)(pByte[0]) & 0x00ff)| \ + (((SK_U16)(pByte[1]) << 8) & 0xff00))); \ + SK_OUT16((IoC), GMA((Mac), (Reg+4)), (SK_U16) \ + (((SK_U16)(pByte[2]) & 0x00ff)| \ + (((SK_U16)(pByte[3]) << 8) & 0xff00))); \ + SK_OUT16((IoC), GMA((Mac), (Reg+8)), (SK_U16) \ + (((SK_U16)(pByte[4]) & 0x00ff)| \ + (((SK_U16)(pByte[5]) << 8) & 0xff00))); \ + SK_OUT16((IoC), GMA((Mac), (Reg+12)), (SK_U16) \ + (((SK_U16)(pByte[6]) & 0x00ff)| \ + (((SK_U16)(pByte[7]) << 8) & 0xff00))); \ +} + +/* + * Different MAC Types + */ +#define SK_MAC_XMAC 0 /* Xaqti XMAC II */ +#define SK_MAC_GMAC 1 /* Marvell GMAC */ + +/* + * Different PHY Types + */ +#define SK_PHY_XMAC 0 /* integrated in XMAC II */ +#define SK_PHY_BCOM 1 /* Broadcom BCM5400 */ +#define SK_PHY_LONE 2 /* Level One LXT1000 */ +#define SK_PHY_NAT 3 /* National DP83891 */ +#define SK_PHY_MARV_COPPER 4 /* Marvell 88E1011S */ +#define SK_PHY_MARV_FIBER 5 /* Marvell 88E1011S working on fiber */ + +/* + * PHY addresses (bits 12..8 of PHY address reg) + */ +#define PHY_ADDR_XMAC (0<<8) +#define PHY_ADDR_BCOM (1<<8) +#define PHY_ADDR_LONE (3<<8) +#define PHY_ADDR_NAT (0<<8) + +/* GPHY address (bits 15..11 of SMI control reg) */ +#define PHY_ADDR_MARV 0 + +/* + * macros to access the PHY + * + * PHY_READ() read a 16 bit value from the PHY + * PHY_WRITE() write a 16 bit value to the PHY + * + * para: + * IoC I/O context needed for SK I/O macros + * pPort Pointer to port struct for PhyAddr + * Mac XMAC to access values: MAC_1 or MAC_2 + * PhyReg PHY Register to read or write + * (p)Val Value or pointer to the value which should be read or + * written. + * + * usage: PHY_READ(IoC, pPort, MAC_1, PHY_CTRL, Value); + * Warning: a PHY_READ on an uninitialized PHY (PHY still in reset) never + * comes back. This is checked in DEBUG mode. + */ +#ifndef DEBUG +#define PHY_READ(IoC, pPort, Mac, PhyReg, pVal) { \ + SK_U16 Mmu; \ + \ + XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \ + XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \ + if ((pPort)->PhyType != SK_PHY_XMAC) { \ + do { \ + XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \ + } while ((Mmu & XM_MMU_PHY_RDY) == 0); \ + XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \ + } \ +} +#else +#define PHY_READ(IoC, pPort, Mac, PhyReg, pVal) { \ + SK_U16 Mmu; \ + int __i = 0; \ + \ + XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \ + XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \ + if ((pPort)->PhyType != SK_PHY_XMAC) { \ + do { \ + XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \ + __i++; \ + if (__i > 100000) { \ + SK_DBG_PRINTF("*****************************\n"); \ + SK_DBG_PRINTF("PHY_READ on uninitialized PHY\n"); \ + SK_DBG_PRINTF("*****************************\n"); \ + break; \ + } \ + } while ((Mmu & XM_MMU_PHY_RDY) == 0); \ + XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \ + } \ +} +#endif /* DEBUG */ + +#define PHY_WRITE(IoC, pPort, Mac, PhyReg, Val) { \ + SK_U16 Mmu; \ + \ + if ((pPort)->PhyType != SK_PHY_XMAC) { \ + do { \ + XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \ + } while ((Mmu & XM_MMU_PHY_BUSY) != 0); \ + } \ + XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \ + XM_OUT16((IoC), (Mac), XM_PHY_DATA, (Val)); \ + if ((pPort)->PhyType != SK_PHY_XMAC) { \ + do { \ + XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \ + } while ((Mmu & XM_MMU_PHY_BUSY) != 0); \ + } \ +} + +/* + * Macro PCI_C() + * + * Use this macro to access PCI config register from the I/O space. + * + * para: + * Addr PCI configuration register to access. + * Values: PCI_VENDOR_ID ... PCI_VPD_ADR_REG, + * + * usage SK_IN16(pAC, PCI_C(PCI_VENDOR_ID), pVal); + */ +#define PCI_C(Addr) (B7_CFG_SPC + (Addr)) /* PCI Config Space */ + +/* + * Macro SK_HW_ADDR(Base, Addr) + * + * Calculates the effective HW address + * + * para: + * Base I/O or memory base address + * Addr Address offset + * + * usage: May be used in SK_INxx and SK_OUTxx macros + * #define SK_IN8(pAC, Addr, pVal) ...\ + * *pVal = (SK_U8)inp(SK_HW_ADDR(pAC->Hw.Iop, Addr))) + */ +#ifdef SK_MEM_MAPPED_IO +#define SK_HW_ADDR(Base, Addr) ((Base) + (Addr)) +#else /* SK_MEM_MAPPED_IO */ +#define SK_HW_ADDR(Base, Addr) \ + ((Base) + (((Addr) & 0x7f) | (((Addr) >> 7 > 0) ? 0x80 : 0))) +#endif /* SK_MEM_MAPPED_IO */ + +#define SZ_LONG (sizeof(SK_U32)) + +/* + * Macro SK_HWAC_LINK_LED() + * + * Use this macro to set the link LED mode. + * para: + * pAC Pointer to adapter context struct + * IoC I/O context needed for SK I/O macros + * Port Port number + * Mode Mode to set for this LED + */ +#define SK_HWAC_LINK_LED(pAC, IoC, Port, Mode) \ + SK_OUT8(IoC, MR_ADDR(Port, LNK_LED_REG), Mode); + + +/* typedefs *******************************************************************/ + + +/* function prototypes ********************************************************/ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __INC_SKGEHW_H */ diff --git a/drivers/net/sk98lin/h/skgehwt.h b/drivers/net/sk98lin/h/skgehwt.h new file mode 100644 index 0000000000..8aa9edd71c --- /dev/null +++ b/drivers/net/sk98lin/h/skgehwt.h @@ -0,0 +1,74 @@ +/****************************************************************************** + * + * Name: skhwt.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.5 $ + * Date: $Date: 1999/11/22 13:54:24 $ + * Purpose: Defines for the hardware timer functions + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998,1999 SysKonnect, + * a business unit of Schneider & Koch & Co. Datensysteme GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * History: + * + * $Log: skgehwt.h,v $ + * Revision 1.5 1999/11/22 13:54:24 cgoos + * Changed license header to GPL. + * + * Revision 1.4 1998/08/19 09:50:58 gklug + * fix: remove struct keyword from c-code (see CCC) add typedefs + * + * Revision 1.3 1998/08/14 07:09:29 gklug + * fix: chg pAc -> pAC + * + * Revision 1.2 1998/08/07 12:54:21 gklug + * fix: first compiled version + * + * Revision 1.1 1998/08/07 09:32:58 gklug + * first version + * + * + * + * + * + ******************************************************************************/ + +/* + * SKGEHWT.H contains all defines and types for the timer functions + */ + +#ifndef _SKGEHWT_H_ +#define _SKGEHWT_H_ + +/* + * SK Hardware Timer + * - needed wherever the HWT module is used + * - use in Adapters context name pAC->Hwt + */ +typedef struct s_Hwt { + SK_U32 TStart ; /* HWT start */ + SK_U32 TStop ; /* HWT stop */ + int TActive ; /* HWT: flag : active/inactive */ +} SK_HWT; + +extern void SkHwtInit(SK_AC *pAC, SK_IOC Ioc); +extern void SkHwtStart(SK_AC *pAC, SK_IOC Ioc, SK_U32 Time); +extern void SkHwtStop(SK_AC *pAC, SK_IOC Ioc); +extern SK_U32 SkHwtRead(SK_AC *pAC,SK_IOC Ioc); +extern void SkHwtIsr(SK_AC *pAC, SK_IOC Ioc); +#endif /* _SKGEHWT_H_ */ diff --git a/drivers/net/sk98lin/h/skgei2c.h b/drivers/net/sk98lin/h/skgei2c.h new file mode 100644 index 0000000000..e639f733c6 --- /dev/null +++ b/drivers/net/sk98lin/h/skgei2c.h @@ -0,0 +1,299 @@ +/****************************************************************************** + * + * Name: skgei2c.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.23 $ + * Date: $Date: 2002/12/19 14:34:27 $ + * Purpose: Special GEnesis defines for TWSI + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * History: + * + * $Log: skgei2c.h,v $ + * Revision 1.23 2002/12/19 14:34:27 rschmidt + * Added cast in macros SK_I2C_SET_BIT() and SK_I2C_CLR_BIT() + * Editorial changes (TWSI) + * + * Revision 1.22 2002/10/14 16:45:56 rschmidt + * Editorial changes (TWSI) + * + * Revision 1.21 2002/08/13 08:42:24 rschmidt + * Changed define for SK_MIN_SENSORS back to 5 + * Merged defines for PHY PLL 3V3 voltage (A and B) + * Editorial changes + * + * Revision 1.20 2002/08/06 09:43:56 jschmalz + * Extensions and changes for Yukon + * + * Revision 1.19 2002/08/02 12:00:08 rschmidt + * Added defines for YUKON sensors + * Editorial changes + * + * Revision 1.18 2001/08/16 12:44:33 afischer + * LM80 sensor init values corrected + * + * Revision 1.17 1999/11/22 13:55:25 cgoos + * Changed license header to GPL. + * + * Revision 1.16 1999/11/12 08:24:10 malthoff + * Change voltage warning and error limits + * (warning +-5%, error +-10%). + * + * Revision 1.15 1999/09/14 14:14:43 malthoff + * The 1000BT Dual Link adapter has got only one Fan. + * The second Fan has been removed. + * + * Revision 1.14 1999/05/27 13:40:50 malthoff + * Fan Divisor = 1. Assuming fan with 6500 rpm. + * + * Revision 1.13 1999/05/20 14:56:55 malthoff + * Bug Fix: Missing brace in SK_LM80_FAN_FAKTOR. + * + * Revision 1.12 1999/05/20 09:22:00 cgoos + * Changes for 1000Base-T (Fan sensors). + * + * Revision 1.11 1998/10/14 05:57:22 cgoos + * Fixed compilation warnings. + * + * Revision 1.10 1998/09/04 08:37:00 malthoff + * bugfix: correct the SK_I2C_GET_CTL() macro. + * + * Revision 1.9 1998/08/25 06:10:03 gklug + * add: thresholds for all sensors + * + * Revision 1.8 1998/08/20 11:37:42 gklug + * chg: change Ioc to IoC + * + * Revision 1.7 1998/08/20 08:53:11 gklug + * fix: compiler errors + * add: Threshold values + * + * Revision 1.6 1998/08/17 11:37:09 malthoff + * Bugfix in SK_I2C_CTL macro. The parameter 'dev' + * has to be shifted 9 bits. + * + * Revision 1.5 1998/08/17 06:52:21 malthoff + * Remove unrequired macros. + * Add macros for accessing TWSI SW register. + * + * Revision 1.4 1998/08/13 08:30:18 gklug + * add: conversion factors for read values + * add: new state SEN_VALEXT to read extension value of temperature sensor + * + * Revision 1.3 1998/08/12 13:37:56 gklug + * rmv: error numbers and messages + * + * Revision 1.2 1998/08/11 07:54:38 gklug + * add: sensor states for GE sensors + * add: Macro to access TWSI hardware register + * chg: Error messages for TWSI errors + * + * Revision 1.1 1998/07/17 11:27:56 gklug + * Created. + * + * + * + ******************************************************************************/ + +/* + * SKGEI2C.H contains all SK-98xx specific defines for the TWSI handling + */ + +#ifndef _INC_SKGEI2C_H_ +#define _INC_SKGEI2C_H_ + +/* + * Macros to access the B2_I2C_CTRL + */ +#define SK_I2C_CTL(IoC, flag, dev, reg, burst) \ + SK_OUT32(IoC, B2_I2C_CTRL,\ + (flag ? 0x80000000UL : 0x0L) | \ + (((SK_U32) reg << 16) & I2C_ADDR) | \ + (((SK_U32) dev << 9) & I2C_DEV_SEL) | \ + (( burst << 4) & I2C_BURST_LEN)) + +#define SK_I2C_STOP(IoC) { \ + SK_U32 I2cCtrl; \ + SK_IN32(IoC, B2_I2C_CTRL, &I2cCtrl); \ + SK_OUT32(IoC, B2_I2C_CTRL, I2cCtrl | I2C_STOP); \ +} + +#define SK_I2C_GET_CTL(IoC, pI2cCtrl) SK_IN32(IoC, B2_I2C_CTRL, pI2cCtrl) + +/* + * Macros to access the TWSI SW Registers + */ +#define SK_I2C_SET_BIT(IoC, SetBits) { \ + SK_U8 OrgBits; \ + SK_IN8(IoC, B2_I2C_SW, &OrgBits); \ + SK_OUT8(IoC, B2_I2C_SW, OrgBits | (SK_U8)(SetBits)); \ +} + +#define SK_I2C_CLR_BIT(IoC, ClrBits) { \ + SK_U8 OrgBits; \ + SK_IN8(IoC, B2_I2C_SW, &OrgBits); \ + SK_OUT8(IoC, B2_I2C_SW, OrgBits & ~((SK_U8)(ClrBits))); \ +} + +#define SK_I2C_GET_SW(IoC, pI2cSw) SK_IN8(IoC, B2_I2C_SW, pI2cSw) + +/* + * define the possible sensor states + */ +#define SK_SEN_IDLE 0 /* Idle: sensor not read */ +#define SK_SEN_VALUE 1 /* Value Read cycle */ +#define SK_SEN_VALEXT 2 /* Extended Value Read cycle */ + +/* + * Conversion factor to convert read Voltage sensor to milli Volt + * Conversion factor to convert read Temperature sensor to 10th degree Celsius + */ +#define SK_LM80_VT_LSB 22 /* 22mV LSB resolution */ +#define SK_LM80_TEMP_LSB 10 /* 1 degree LSB resolution */ +#define SK_LM80_TEMPEXT_LSB 5 /* 0.5 degree LSB resolution for the + * extension value + */ +#define SK_LM80_FAN_FAKTOR ((22500L*60)/(1*2)) +/* formula: counter = (22500*60)/(rpm * divisor * pulses/2) + * assuming: 6500rpm, 4 pulses, divisor 1 + */ + +/* + * Define sensor management data + * Maximum is reached on copperfield with dual Broadcom. + * Board specific maximum is in pAC->I2c.MaxSens + */ +#define SK_MAX_SENSORS 8 /* maximal no. of installed sensors */ +#define SK_MIN_SENSORS 5 /* minimal no. of installed sensors */ + +/* + * To watch the statemachine (JS) use the timer in two ways instead of one as hitherto + */ +#define SK_TIMER_WATCH_STATEMACHINE 0 /* Watch the statemachine to finish in a specific time */ +#define SK_TIMER_NEW_GAUGING 1 /* Start a new gauging when timer expires */ + + +/* + * Defines for the individual Thresholds + */ + +/* Temperature sensor */ +#define SK_SEN_TEMP_HIGH_ERR 800 /* Temperature High Err Threshold */ +#define SK_SEN_TEMP_HIGH_WARN 700 /* Temperature High Warn Threshold */ +#define SK_SEN_TEMP_LOW_WARN 100 /* Temperature Low Warn Threshold */ +#define SK_SEN_TEMP_LOW_ERR 0 /* Temperature Low Err Threshold */ + +/* VCC which should be 5 V */ +#define SK_SEN_PCI_5V_HIGH_ERR 5588 /* Voltage PCI High Err Threshold */ +#define SK_SEN_PCI_5V_HIGH_WARN 5346 /* Voltage PCI High Warn Threshold */ +#define SK_SEN_PCI_5V_LOW_WARN 4664 /* Voltage PCI Low Warn Threshold */ +#define SK_SEN_PCI_5V_LOW_ERR 4422 /* Voltage PCI Low Err Threshold */ + +/* + * VIO may be 5 V or 3.3 V. Initialization takes two parts: + * 1. Initialize lowest lower limit and highest higher limit. + * 2. After the first value is read correct the upper or the lower limit to + * the appropriate C constant. + * + * Warning limits are +-5% of the exepected voltage. + * Error limits are +-10% of the expected voltage. + */ + +/* Bug fix AF: 16.Aug.2001: Correct the init base of LM80 sensor */ + +#define SK_SEN_PCI_IO_5V_HIGH_ERR 5566 /* + 10% V PCI-IO High Err Threshold */ +#define SK_SEN_PCI_IO_5V_HIGH_WARN 5324 /* + 5% V PCI-IO High Warn Threshold */ + /* 5000 mVolt */ +#define SK_SEN_PCI_IO_5V_LOW_WARN 4686 /* - 5% V PCI-IO Low Warn Threshold */ +#define SK_SEN_PCI_IO_5V_LOW_ERR 4444 /* - 10% V PCI-IO Low Err Threshold */ + +#define SK_SEN_PCI_IO_RANGE_LIMITER 4000 /* 4000 mV range delimiter */ + +/* correction values for the second pass */ +#define SK_SEN_PCI_IO_3V3_HIGH_ERR 3850 /* + 15% V PCI-IO High Err Threshold */ +#define SK_SEN_PCI_IO_3V3_HIGH_WARN 3674 /* + 10% V PCI-IO High Warn Threshold */ + /* 3300 mVolt */ +#define SK_SEN_PCI_IO_3V3_LOW_WARN 2926 /* - 10% V PCI-IO Low Warn Threshold */ +#define SK_SEN_PCI_IO_3V3_LOW_ERR 2772 /* - 15% V PCI-IO Low Err Threshold */ + + +/* + * VDD voltage + */ +#define SK_SEN_VDD_HIGH_ERR 3630 /* Voltage ASIC High Err Threshold */ +#define SK_SEN_VDD_HIGH_WARN 3476 /* Voltage ASIC High Warn Threshold */ +#define SK_SEN_VDD_LOW_WARN 3146 /* Voltage ASIC Low Warn Threshold */ +#define SK_SEN_VDD_LOW_ERR 2970 /* Voltage ASIC Low Err Threshold */ + +/* + * PHY PLL 3V3 voltage + */ +#define SK_SEN_PLL_3V3_HIGH_ERR 3630 /* Voltage PMA High Err Threshold */ +#define SK_SEN_PLL_3V3_HIGH_WARN 3476 /* Voltage PMA High Warn Threshold */ +#define SK_SEN_PLL_3V3_LOW_WARN 3146 /* Voltage PMA Low Warn Threshold */ +#define SK_SEN_PLL_3V3_LOW_ERR 2970 /* Voltage PMA Low Err Threshold */ + +/* + * VAUX (YUKON only) + */ +#define SK_SEN_VAUX_3V3_HIGH_ERR 3630 /* Voltage VAUX High Err Threshold */ +#define SK_SEN_VAUX_3V3_HIGH_WARN 3476 /* Voltage VAUX High Warn Threshold */ +#define SK_SEN_VAUX_3V3_LOW_WARN 3146 /* Voltage VAUX Low Warn Threshold */ +#define SK_SEN_VAUX_3V3_LOW_ERR 2970 /* Voltage VAUX Low Err Threshold */ +#define SK_SEN_VAUX_0V_WARN_ERR 0 /* if VAUX not present */ +#define SK_SEN_VAUX_RANGE_LIMITER 1000 /* 1000 mV range delimiter */ + +/* + * PHY 2V5 voltage + */ +#define SK_SEN_PHY_2V5_HIGH_ERR 2750 /* Voltage PHY High Err Threshold */ +#define SK_SEN_PHY_2V5_HIGH_WARN 2640 /* Voltage PHY High Warn Threshold */ +#define SK_SEN_PHY_2V5_LOW_WARN 2376 /* Voltage PHY Low Warn Threshold */ +#define SK_SEN_PHY_2V5_LOW_ERR 2222 /* Voltage PHY Low Err Threshold */ + +/* + * ASIC Core 1V5 voltage (YUKON only) + */ +#define SK_SEN_CORE_1V5_HIGH_ERR 1650 /* Voltage ASIC Core High Err Threshold */ +#define SK_SEN_CORE_1V5_HIGH_WARN 1575 /* Voltage ASIC Core High Warn Threshold */ +#define SK_SEN_CORE_1V5_LOW_WARN 1425 /* Voltage ASIC Core Low Warn Threshold */ +#define SK_SEN_CORE_1V5_LOW_ERR 1350 /* Voltage ASIC Core Low Err Threshold */ + +/* + * FAN 1 speed + */ +/* assuming: 6500rpm +-15%, 4 pulses, + * warning at: 80 % + * error at: 70 % + * no upper limit + */ +#define SK_SEN_FAN_HIGH_ERR 20000 /* FAN Speed High Err Threshold */ +#define SK_SEN_FAN_HIGH_WARN 20000 /* FAN Speed High Warn Threshold */ +#define SK_SEN_FAN_LOW_WARN 5200 /* FAN Speed Low Warn Threshold */ +#define SK_SEN_FAN_LOW_ERR 4550 /* FAN Speed Low Err Threshold */ + +/* + * Some Voltages need dynamic thresholds + */ +#define SK_SEN_DYN_INIT_NONE 0 /* No dynamic init of thresholds */ +#define SK_SEN_DYN_INIT_PCI_IO 10 /* Init PCI-IO with new thresholds */ +#define SK_SEN_DYN_INIT_VAUX 11 /* Init VAUX with new thresholds */ + +extern int SkLm80ReadSensor(SK_AC *pAC, SK_IOC IoC, SK_SENSOR *pSen); +#endif /* n_INC_SKGEI2C_H */ diff --git a/drivers/net/sk98lin/h/skgeinit.h b/drivers/net/sk98lin/h/skgeinit.h new file mode 100644 index 0000000000..cdddef92b3 --- /dev/null +++ b/drivers/net/sk98lin/h/skgeinit.h @@ -0,0 +1,1113 @@ +/****************************************************************************** + * + * Name: skgeinit.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.75 $ + * Date: $Date: 2003/02/05 13:36:39 $ + * Purpose: Structures and prototypes for the GE Init Module + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2003 SysKonnect GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * History: + * + * $Log: skgeinit.h,v $ + * Revision 1.75 2003/02/05 13:36:39 rschmidt + * Added define SK_FACT_78 for YUKON's Host Clock of 78.12 MHz + * Editorial changes + * + * Revision 1.74 2003/01/28 09:39:16 rschmidt + * Added entry GIYukonLite in s_GeInit structure + * Editorial changes + * + * Revision 1.73 2002/11/15 12:47:25 rschmidt + * Replaced error message SKERR_HWI_E024 for Cable Diagnostic with + * Rx queue error in SkGeStopPort(). + * + * Revision 1.72 2002/11/12 17:08:35 rschmidt + * Added entries for Cable Diagnostic to Port structure + * Added entries GIPciSlot64 and GIPciClock66 in s_GeInit structure + * Added error message for Cable Diagnostic + * Added prototypes for SkGmCableDiagStatus() + * Editorial changes + * + * Revision 1.71 2002/10/21 11:26:10 mkarl + * Changed interface of SkGeInitAssignRamToQueues(). + * + * Revision 1.70 2002/10/14 08:21:32 rschmidt + * Changed type of GICopperType, GIVauxAvail to SK_BOOL + * Added entry PRxOverCnt to Port structure + * Added entry GIYukon32Bit in s_GeInit structure + * Editorial changes + * + * Revision 1.69 2002/10/09 16:57:15 mkarl + * Added some constants and macros for SkGeInitAssignRamToQueues(). + * + * Revision 1.68 2002/09/12 08:58:51 rwahl + * Retrieve counters needed for XMAC errata workarounds directly because + * PNMI returns corrected counter values (e.g. #10620). + * + * Revision 1.67 2002/08/16 14:40:30 rschmidt + * Added entries GIGenesis and GICopperType in s_GeInit structure + * Added prototypes for SkMacHashing() + * Editorial changes + * + * Revision 1.66 2002/08/12 13:27:21 rschmidt + * Added defines for Link speed capabilities + * Added entry PLinkSpeedCap to Port structure + * Added entry GIVauxAvail in s_GeInit structure + * Added prototypes for SkMacPromiscMode() + * Editorial changes + * + * Revision 1.65 2002/08/08 15:46:18 rschmidt + * Added define SK_PHY_ACC_TO for PHY access timeout + * Added define SK_XM_RX_HI_WM for XMAC Rx High Watermark + * Added define SK_MIN_TXQ_SIZE for Min RAM Buffer Tx Queue Size + * Added entry PhyId1 to Port structure + * + * Revision 1.64 2002/07/23 16:02:56 rschmidt + * Added entry GIWolOffs in s_GeInit struct (HW-Bug in YUKON 1st rev.) + * Added prototypes for: SkGePhyRead(), SkGePhyWrite() + * + * Revision 1.63 2002/07/18 08:17:38 rwahl + * Corrected definitions for SK_LSPEED_xxx & SK_LSPEED_STAT_xxx. + * + * Revision 1.62 2002/07/17 18:21:55 rwahl + * Added SK_LSPEED_INDETERMINATED define. + * + * Revision 1.61 2002/07/17 17:16:03 rwahl + * - MacType now member of GIni struct. + * - Struct alignment to 32bit. + * - Editorial change. + * + * Revision 1.60 2002/07/15 18:23:39 rwahl + * Added GeMacFunc to GE Init structure. + * Added prototypes for SkXmUpdateStats(), SkGmUpdateStats(), + * SkXmMacStatistic(), SkGmMacStatistic(), SkXmResetCounter(), + * SkGmResetCounter(), SkXmOverflowStatus(), SkGmOverflowStatus(). + * Added defines for current link speed state. + * Added ERRMSG defintions for MacUpdateStat() & MacStatistics(). + * + * Revision 1.59 2002/07/15 15:40:22 rschmidt + * Added entry PLinkSpeedUsed to Port structure + * Editorial changes + * + * Revision 1.58 2002/06/10 09:36:30 rschmidt + * Editorial changes. + * + * Revision 1.57 2002/06/05 08:18:00 rschmidt + * Corrected alignment in Port Structure + * Added new prototypes for GMAC + * Editorial changes + * + * Revision 1.56 2002/04/25 11:38:12 rschmidt + * Added defines for Link speed values + * Added defines for Loopback parameters for MAC and PHY + * Removed entry PRxCmd from Port structure + * Added entry PLinkSpeed to Port structure + * Added entries GIChipId and GIChipRev to GE Init structure + * Removed entry GIAnyPortAct from GE Init structure + * Added prototypes for: SkMacInit(), SkMacInitPhy(), + * SkMacRxTxDisable(), SkMacSoftRst(), SkMacHardRst(), SkMacIrq(), + * SkMacIrqDisable(), SkMacFlushTxFifo(), SkMacFlushRxFifo(), + * SkMacAutoNegDone(), SkMacAutoNegLipaPhy(), SkMacSetRxTxEn(), + * SkXmPhyRead(), SkXmPhyRead(), SkGmPhyWrite(), SkGmPhyWrite(); + * Removed prototypes for static functions in SkXmac2.c + * Editorial changes + * + * Revision 1.55 2002/02/26 15:24:53 rwahl + * Fix: no link with manual configuration (#10673). The previous fix for + * #10639 was removed. So for RLMT mode = CLS the RLMT may switch to + * misconfigured port. It should not occur for the other RLMT modes. + * + * Revision 1.54 2002/01/18 16:52:52 rwahl + * Editorial corrections. + * + * Revision 1.53 2001/11/20 09:19:58 rwahl + * Reworked bugfix #10639 (no dependency to RLMT mode). + * + * Revision 1.52 2001/10/26 07:52:23 afischer + * Port switching bug in `check local link` mode + * + * Revision 1.51 2001/02/09 12:26:38 cgoos + * Inserted #ifdef DIAG for half duplex workaround timer. + * + * Revision 1.50 2001/02/07 07:56:40 rassmann + * Corrected copyright. + * + * Revision 1.49 2001/01/31 15:32:18 gklug + * fix: problem with autosensing an SR8800 switch + * add: counter for autoneg timeouts + * + * Revision 1.48 2000/11/09 11:30:10 rassmann + * WA: Waiting after releasing reset until BCom chip is accessible. + * + * Revision 1.47 2000/10/18 12:22:40 cgoos + * Added workaround for half duplex hangup. + * + * Revision 1.46 2000/08/10 11:28:00 rassmann + * Editorial changes. + * Preserving 32-bit alignment in structs for the adapter context. + * + * Revision 1.45 1999/11/22 13:56:19 cgoos + * Changed license header to GPL. + * + * Revision 1.44 1999/10/26 07:34:15 malthoff + * The define SK_LNK_ON has been lost in v1.41. + * + * Revision 1.43 1999/10/06 09:30:16 cgoos + * Changed SK_XM_THR_JUMBO. + * + * Revision 1.42 1999/09/16 12:58:26 cgoos + * Changed SK_LED_STANDY macro to be independent of HW link sync. + * + * Revision 1.41 1999/07/30 06:56:14 malthoff + * Correct comment for SK_MS_STAT_UNSET. + * + * Revision 1.40 1999/05/27 13:38:46 cgoos + * Added SK_BMU_TX_WM. + * Made SK_BMU_TX_WM and SK_BMU_RX_WM user-definable. + * Changed XMAC Tx treshold to max. values. + * + * Revision 1.39 1999/05/20 14:35:26 malthoff + * Remove prototypes for SkGeLinkLED(). + * + * Revision 1.38 1999/05/19 11:59:12 cgoos + * Added SK_MS_CAP_INDETERMINATED define. + * + * Revision 1.37 1999/05/19 07:32:33 cgoos + * Changes for 1000Base-T. + * LED-defines for HWAC_LINK_LED macro. + * + * Revision 1.36 1999/04/08 14:00:24 gklug + * add:Port struct field PLinkResCt + * + * Revision 1.35 1999/03/25 07:43:07 malthoff + * Add error string for SKERR_HWI_E018MSG. + * + * Revision 1.34 1999/03/12 16:25:57 malthoff + * Remove PPollRxD and PPollTxD. + * Add SKERR_HWI_E017MSG. and SK_DPOLL_MAX. + * + * Revision 1.33 1999/03/12 13:34:41 malthoff + * Add Autonegotiation error codes. + * Change defines for parameter Mode in SkXmSetRxCmd(). + * Replace __STDC__ by SK_KR_PROTO. + * + * Revision 1.32 1999/01/25 14:40:20 mhaveman + * Added new return states for the virtual management port if multiple + * ports are active but differently configured. + * + * Revision 1.31 1998/12/11 15:17:02 gklug + * add: Link partnet autoneg states : Unknown Manual and Auto-negotiation + * + * Revision 1.30 1998/12/07 12:17:04 gklug + * add: Link Partner auto-negotiation flag + * + * Revision 1.29 1998/12/01 10:54:42 gklug + * add: variables for XMAC Errata + * + * Revision 1.28 1998/12/01 10:14:15 gklug + * add: PIsave saves the Interrupt status word + * + * Revision 1.27 1998/11/26 15:24:52 mhaveman + * Added link status states SK_LMODE_STAT_AUTOHALF and + * SK_LMODE_STAT_AUTOFULL which are used by PNMI. + * + * Revision 1.26 1998/11/26 14:53:01 gklug + * add:autoNeg Timeout variable + * + * Revision 1.25 1998/11/26 08:58:50 gklug + * add: Link Mode configuration (AUTO Sense mode) + * + * Revision 1.24 1998/11/24 13:30:27 gklug + * add: PCheckPar to port struct + * + * Revision 1.23 1998/11/18 13:23:26 malthoff + * Add SK_PKT_TO_MAX. + * + * Revision 1.22 1998/11/18 13:19:54 gklug + * add: PPrevShorts and PLinkBroken to port struct for WA XMAC Errata #C1 + * + * Revision 1.21 1998/10/26 08:02:57 malthoff + * Add GIRamOffs. + * + * Revision 1.20 1998/10/19 07:28:37 malthoff + * Add prototype for SkGeInitRamIface(). + * + * Revision 1.19 1998/10/14 14:47:48 malthoff + * SK_TIMER should not be defined for Diagnostics. + * Add SKERR_HWI_E015MSG and SKERR_HWI_E016MSG. + * + * Revision 1.18 1998/10/14 14:00:03 gklug + * add: timer to port struct for workaround of Errata #2 + * + * Revision 1.17 1998/10/14 11:23:09 malthoff + * Add prototype for SkXmAutoNegDone(). + * Fix SkXmSetRxCmd() prototype statement. + * + * Revision 1.16 1998/10/14 05:42:29 gklug + * add: HWLinkUp flag to Port struct + * + * Revision 1.15 1998/10/09 08:26:33 malthoff + * Rename SK_RB_ULPP_B to SK_RB_LLPP_B. + * + * Revision 1.14 1998/10/09 07:11:13 malthoff + * bug fix: SK_FACT_53 is 85 not 117. + * Rework time out init values. + * Add GIPortUsage and corresponding defines. + * Add some error log messages. + * + * Revision 1.13 1998/10/06 14:13:14 malthoff + * Add prototype for SkGeLoadLnkSyncCnt(). + * + * Revision 1.12 1998/10/05 11:29:53 malthoff + * bug fix: A comment was not closed. + * + * Revision 1.11 1998/10/05 08:01:59 malthoff + * Add default Timeout- Threshold- and + * Watermark constants. Add QRam start and end + * variables. Also add vars to store the polling + * mode and receive command. Add new Error Log + * Messages and function prototypes. + * + * Revision 1.10 1998/09/28 13:34:48 malthoff + * Add mode bits for LED functions. + * Move Autoneg and Flow Ctrl bits from shgesirq.h + * Add the required Error Log Entries + * and Function Prototypes. + * + * Revision 1.9 1998/09/16 14:38:41 malthoff + * Rework the SK_LNK_xxx defines. + * Add error log message defines. + * Add prototypes for skxmac2.c + * + * Revision 1.8 1998/09/11 05:29:18 gklug + * add: init state of a port + * + * Revision 1.7 1998/09/08 08:35:52 gklug + * add: defines of the Init Levels + * + * Revision 1.6 1998/09/03 13:48:42 gklug + * add: Link strati, capabilities to Port struct + * + * Revision 1.5 1998/09/03 13:30:59 malthoff + * Add SK_LNK_BLINK and SK_LNK_PERM. + * + * Revision 1.4 1998/09/03 09:55:31 malthoff + * Add constants for parameters Dir and RstMode + * when calling SkGeStopPort(). + * Rework the prototype section. + * Add Queue Address offsets PRxQOff, PXsQOff, and PXaQOff. + * Remove Ioc with IoC. + * + * Revision 1.3 1998/08/19 09:11:54 gklug + * fix: struct are removed from c-source (see CCC) + * add: typedefs for all structs + * + * Revision 1.2 1998/07/28 12:38:26 malthoff + * The prototypes got the parameter 'IoC'. + * + * Revision 1.1 1998/07/23 09:50:24 malthoff + * Created. + * + ******************************************************************************/ + +#ifndef __INC_SKGEINIT_H_ +#define __INC_SKGEINIT_H_ + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* defines ********************************************************************/ + +/* modifying Link LED behaviour (used with SkGeLinkLED()) */ +#define SK_LNK_OFF LED_OFF +#define SK_LNK_ON (LED_ON | LED_BLK_OFF | LED_SYNC_OFF) +#define SK_LNK_BLINK (LED_ON | LED_BLK_ON | LED_SYNC_ON) +#define SK_LNK_PERM (LED_ON | LED_BLK_OFF | LED_SYNC_ON) +#define SK_LNK_TST (LED_ON | LED_BLK_ON | LED_SYNC_OFF) + +/* parameter 'Mode' when calling SK_HWAC_LINK_LED() */ +#define SK_LED_OFF LED_OFF +#define SK_LED_ACTIVE (LED_ON | LED_BLK_OFF | LED_SYNC_OFF) +#define SK_LED_STANDBY (LED_ON | LED_BLK_ON | LED_SYNC_OFF) + +/* addressing LED Registers in SkGeXmitLED() */ +#define XMIT_LED_INI 0 +#define XMIT_LED_CNT (RX_LED_VAL - RX_LED_INI) +#define XMIT_LED_CTRL (RX_LED_CTRL- RX_LED_INI) +#define XMIT_LED_TST (RX_LED_TST - RX_LED_INI) + +/* parameter 'Mode' when calling SkGeXmitLED() */ +#define SK_LED_DIS 0 +#define SK_LED_ENA 1 +#define SK_LED_TST 2 + +/* Counter and Timer constants, for a host clock of 62.5 MHz */ +#define SK_XMIT_DUR 0x002faf08L /* 50 ms */ +#define SK_BLK_DUR 0x01dcd650L /* 500 ms */ + +#define SK_DPOLL_DEF 0x00ee6b28L /* 250 ms at 62.5 MHz */ + +#define SK_DPOLL_MAX 0x00ffffffL /* 268 ms at 62.5 MHz */ + /* 215 ms at 78.12 MHz */ + +#define SK_FACT_62 100 /* is given in percent */ +#define SK_FACT_53 85 /* on GENESIS: 53.12 MHz */ +#define SK_FACT_78 125 /* on YUKON: 78.12 MHz */ + +/* Timeout values */ +#define SK_MAC_TO_53 72 /* MAC arbiter timeout */ +#define SK_PKT_TO_53 0x2000 /* Packet arbiter timeout */ +#define SK_PKT_TO_MAX 0xffff /* Maximum value */ +#define SK_RI_TO_53 36 /* RAM interface timeout */ + +#define SK_PHY_ACC_TO 600000 /* PHY access timeout */ + +/* RAM Buffer High Pause Threshold values */ +#define SK_RB_ULPP ( 8 * 1024) /* Upper Level in kB/8 */ +#define SK_RB_LLPP_S (10 * 1024) /* Lower Level for small Queues */ +#define SK_RB_LLPP_B (16 * 1024) /* Lower Level for big Queues */ + +#ifndef SK_BMU_RX_WM +#define SK_BMU_RX_WM 0x600 /* BMU Rx Watermark */ +#endif +#ifndef SK_BMU_TX_WM +#define SK_BMU_TX_WM 0x600 /* BMU Tx Watermark */ +#endif + +/* XMAC II Rx High Watermark */ +#define SK_XM_RX_HI_WM 0x05aa /* 1450 */ + +/* XMAC II Tx Threshold */ +#define SK_XM_THR_REDL 0x01fb /* .. for redundant link usage */ +#define SK_XM_THR_SL 0x01fb /* .. for single link adapters */ +#define SK_XM_THR_MULL 0x01fb /* .. for multiple link usage */ +#define SK_XM_THR_JUMBO 0x03fc /* .. for jumbo frame usage */ + +/* values for GIPortUsage */ +#define SK_RED_LINK 1 /* redundant link usage */ +#define SK_MUL_LINK 2 /* multiple link usage */ +#define SK_JUMBO_LINK 3 /* driver uses jumbo frames */ + +/* Minimum RAM Buffer Rx Queue Size */ +#define SK_MIN_RXQ_SIZE 16 /* 16 kB */ + +/* Minimum RAM Buffer Tx Queue Size */ +#define SK_MIN_TXQ_SIZE 16 /* 16 kB */ + +/* Queue Size units */ +#define QZ_UNITS 0x7 +#define QZ_STEP 8 + +/* Percentage of queue size from whole memory */ +/* 80 % for receive */ +#define RAM_QUOTA_RX 80L +/* 0% for sync transfer */ +#define RAM_QUOTA_SYNC 0L +/* the rest (20%) is taken for async transfer */ + +/* Get the rounded queue size in Bytes in 8k steps */ +#define ROUND_QUEUE_SIZE(SizeInBytes) \ + ((((unsigned long) (SizeInBytes) + (QZ_STEP*1024L)-1) / 1024) & \ + ~(QZ_STEP-1)) + +/* Get the rounded queue size in KBytes in 8k steps */ +#define ROUND_QUEUE_SIZE_KB(Kilobytes) \ + ROUND_QUEUE_SIZE((Kilobytes) * 1024L) + +/* Types of RAM Buffer Queues */ +#define SK_RX_SRAM_Q 1 /* small receive queue */ +#define SK_RX_BRAM_Q 2 /* big receive queue */ +#define SK_TX_RAM_Q 3 /* small or big transmit queue */ + +/* parameter 'Dir' when calling SkGeStopPort() */ +#define SK_STOP_TX 1 /* Stops the transmit path, resets the XMAC */ +#define SK_STOP_RX 2 /* Stops the receive path */ +#define SK_STOP_ALL 3 /* Stops Rx and Tx path, resets the XMAC */ + +/* parameter 'RstMode' when calling SkGeStopPort() */ +#define SK_SOFT_RST 1 /* perform a software reset */ +#define SK_HARD_RST 2 /* perform a hardware reset */ + +/* Init Levels */ +#define SK_INIT_DATA 0 /* Init level 0: init data structures */ +#define SK_INIT_IO 1 /* Init level 1: init with IOs */ +#define SK_INIT_RUN 2 /* Init level 2: init for run time */ + +/* Link Mode Parameter */ +#define SK_LMODE_HALF 1 /* Half Duplex Mode */ +#define SK_LMODE_FULL 2 /* Full Duplex Mode */ +#define SK_LMODE_AUTOHALF 3 /* AutoHalf Duplex Mode */ +#define SK_LMODE_AUTOFULL 4 /* AutoFull Duplex Mode */ +#define SK_LMODE_AUTOBOTH 5 /* AutoBoth Duplex Mode */ +#define SK_LMODE_AUTOSENSE 6 /* configured mode auto sensing */ +#define SK_LMODE_INDETERMINATED 7 /* indeterminated */ + +/* Auto-negotiation timeout in 100ms granularity */ +#define SK_AND_MAX_TO 6 /* Wait 600 msec before link comes up */ + +/* Auto-negotiation error codes */ +#define SK_AND_OK 0 /* no error */ +#define SK_AND_OTHER 1 /* other error than below */ +#define SK_AND_DUP_CAP 2 /* Duplex capabilities error */ + + +/* Link Speed Capabilities */ +#define SK_LSPEED_CAP_AUTO (1<<0) /* Automatic resolution */ +#define SK_LSPEED_CAP_10MBPS (1<<1) /* 10 Mbps */ +#define SK_LSPEED_CAP_100MBPS (1<<2) /* 100 Mbps */ +#define SK_LSPEED_CAP_1000MBPS (1<<3) /* 1000 Mbps */ +#define SK_LSPEED_CAP_INDETERMINATED (1<<4) /* indeterminated */ + +/* Link Speed Parameter */ +#define SK_LSPEED_AUTO 1 /* Automatic resolution */ +#define SK_LSPEED_10MBPS 2 /* 10 Mbps */ +#define SK_LSPEED_100MBPS 3 /* 100 Mbps */ +#define SK_LSPEED_1000MBPS 4 /* 1000 Mbps */ +#define SK_LSPEED_INDETERMINATED 5 /* indeterminated */ + +/* Link Speed Current State */ +#define SK_LSPEED_STAT_UNKNOWN 1 +#define SK_LSPEED_STAT_10MBPS 2 +#define SK_LSPEED_STAT_100MBPS 3 +#define SK_LSPEED_STAT_1000MBPS 4 +#define SK_LSPEED_STAT_INDETERMINATED 5 + + +/* Link Capability Parameter */ +#define SK_LMODE_CAP_HALF (1<<0) /* Half Duplex Mode */ +#define SK_LMODE_CAP_FULL (1<<1) /* Full Duplex Mode */ +#define SK_LMODE_CAP_AUTOHALF (1<<2) /* AutoHalf Duplex Mode */ +#define SK_LMODE_CAP_AUTOFULL (1<<3) /* AutoFull Duplex Mode */ +#define SK_LMODE_CAP_INDETERMINATED (1<<4) /* indeterminated */ + +/* Link Mode Current State */ +#define SK_LMODE_STAT_UNKNOWN 1 /* Unknown Duplex Mode */ +#define SK_LMODE_STAT_HALF 2 /* Half Duplex Mode */ +#define SK_LMODE_STAT_FULL 3 /* Full Duplex Mode */ +#define SK_LMODE_STAT_AUTOHALF 4 /* Half Duplex Mode obtained by Auto-Neg */ +#define SK_LMODE_STAT_AUTOFULL 5 /* Full Duplex Mode obtained by Auto-Neg */ +#define SK_LMODE_STAT_INDETERMINATED 6 /* indeterminated */ + +/* Flow Control Mode Parameter (and capabilities) */ +#define SK_FLOW_MODE_NONE 1 /* No Flow-Control */ +#define SK_FLOW_MODE_LOC_SEND 2 /* Local station sends PAUSE */ +#define SK_FLOW_MODE_SYMMETRIC 3 /* Both stations may send PAUSE */ +#define SK_FLOW_MODE_SYM_OR_REM 4 /* Both stations may send PAUSE or + * just the remote station may send PAUSE + */ +#define SK_FLOW_MODE_INDETERMINATED 5 /* indeterminated */ + +/* Flow Control Status Parameter */ +#define SK_FLOW_STAT_NONE 1 /* No Flow Control */ +#define SK_FLOW_STAT_REM_SEND 2 /* Remote Station sends PAUSE */ +#define SK_FLOW_STAT_LOC_SEND 3 /* Local station sends PAUSE */ +#define SK_FLOW_STAT_SYMMETRIC 4 /* Both station may send PAUSE */ +#define SK_FLOW_STAT_INDETERMINATED 5 /* indeterminated */ + +/* Master/Slave Mode Capabilities */ +#define SK_MS_CAP_AUTO (1<<0) /* Automatic resolution */ +#define SK_MS_CAP_MASTER (1<<1) /* This station is master */ +#define SK_MS_CAP_SLAVE (1<<2) /* This station is slave */ +#define SK_MS_CAP_INDETERMINATED (1<<3) /* indeterminated */ + +/* Set Master/Slave Mode Parameter (and capabilities) */ +#define SK_MS_MODE_AUTO 1 /* Automatic resolution */ +#define SK_MS_MODE_MASTER 2 /* This station is master */ +#define SK_MS_MODE_SLAVE 3 /* This station is slave */ +#define SK_MS_MODE_INDETERMINATED 4 /* indeterminated */ + +/* Master/Slave Status Parameter */ +#define SK_MS_STAT_UNSET 1 /* The M/S status is not set */ +#define SK_MS_STAT_MASTER 2 /* This station is Master */ +#define SK_MS_STAT_SLAVE 3 /* This station is Dlave */ +#define SK_MS_STAT_FAULT 4 /* M/S resolution failed */ +#define SK_MS_STAT_INDETERMINATED 5 /* indeterminated */ + +/* parameter 'Mode' when calling SkXmSetRxCmd() */ +#define SK_STRIP_FCS_ON (1<<0) /* Enable FCS stripping of Rx frames */ +#define SK_STRIP_FCS_OFF (1<<1) /* Disable FCS stripping of Rx frames */ +#define SK_STRIP_PAD_ON (1<<2) /* Enable pad byte stripping of Rx fr */ +#define SK_STRIP_PAD_OFF (1<<3) /* Disable pad byte stripping of Rx fr */ +#define SK_LENERR_OK_ON (1<<4) /* Don't chk fr for in range len error */ +#define SK_LENERR_OK_OFF (1<<5) /* Check frames for in range len error */ +#define SK_BIG_PK_OK_ON (1<<6) /* Don't set Rx Error bit for big frames */ +#define SK_BIG_PK_OK_OFF (1<<7) /* Set Rx Error bit for big frames */ +#define SK_SELF_RX_ON (1<<8) /* Enable Rx of own packets */ +#define SK_SELF_RX_OFF (1<<9) /* Disable Rx of own packets */ + +/* parameter 'Para' when calling SkMacSetRxTxEn() */ +#define SK_MAC_LOOPB_ON (1<<0) /* Enable MAC Loopback Mode */ +#define SK_MAC_LOOPB_OFF (1<<1) /* Disable MAC Loopback Mode */ +#define SK_PHY_LOOPB_ON (1<<2) /* Enable PHY Loopback Mode */ +#define SK_PHY_LOOPB_OFF (1<<3) /* Disable PHY Loopback Mode */ +#define SK_PHY_FULLD_ON (1<<4) /* Enable GMII Full Duplex */ +#define SK_PHY_FULLD_OFF (1<<5) /* Disable GMII Full Duplex */ + +/* States of PState */ +#define SK_PRT_RESET 0 /* the port is reset */ +#define SK_PRT_STOP 1 /* the port is stopped (similar to SW reset) */ +#define SK_PRT_INIT 2 /* the port is initialized */ +#define SK_PRT_RUN 3 /* the port has an active link */ + +/* Default receive frame limit for Workaround of XMAC Errata */ +#define SK_DEF_RX_WA_LIM SK_CONSTU64(100) + +/* Link Partner Status */ +#define SK_LIPA_UNKNOWN 0 /* Link partner is in unknown state */ +#define SK_LIPA_MANUAL 1 /* Link partner is in detected manual state */ +#define SK_LIPA_AUTO 2 /* Link partner is in auto-negotiation state */ + +/* Maximum Restarts before restart is ignored (3Com WA) */ +#define SK_MAX_LRESTART 3 /* Max. 3 times the link is restarted */ + +/* Max. Auto-neg. timeouts before link detection in sense mode is reset */ +#define SK_MAX_ANEG_TO 10 /* Max. 10 times the sense mode is reset */ + +/* structures *****************************************************************/ + +/* + * MAC specific functions + */ +typedef struct s_GeMacFunc { + int (*pFnMacUpdateStats)(SK_AC *pAC, SK_IOC IoC, unsigned int Port); + int (*pFnMacStatistic)(SK_AC *pAC, SK_IOC IoC, unsigned int Port, + SK_U16 StatAddr, SK_U32 *pVal); + int (*pFnMacResetCounter)(SK_AC *pAC, SK_IOC IoC, unsigned int Port); + int (*pFnMacOverflow)(SK_AC *pAC, SK_IOC IoC, unsigned int Port, + SK_U16 IStatus, SK_U64 *pVal); +} SK_GEMACFUNC; + +/* + * Port Structure + */ +typedef struct s_GePort { +#ifndef SK_DIAG + SK_TIMER PWaTimer; /* Workaround Timer */ + SK_TIMER HalfDupChkTimer; +#endif /* SK_DIAG */ + SK_U32 PPrevShorts; /* Previous short Counter checking */ + SK_U32 PPrevFcs; /* Previous FCS Error Counter checking */ + SK_U64 PPrevRx; /* Previous RxOk Counter checking */ + SK_U64 PRxLim; /* Previous RxOk Counter checking */ + SK_U64 LastOctets; /* For half duplex hang check */ + int PLinkResCt; /* Link Restart Counter */ + int PAutoNegTimeOut;/* Auto-negotiation timeout current value */ + int PAutoNegTOCt; /* Auto-negotiation Timeout Counter */ + int PRxQSize; /* Port Rx Queue Size in kB */ + int PXSQSize; /* Port Synchronous Transmit Queue Size in kB */ + int PXAQSize; /* Port Asynchronous Transmit Queue Size in kB */ + SK_U32 PRxQRamStart; /* Receive Queue RAM Buffer Start Address */ + SK_U32 PRxQRamEnd; /* Receive Queue RAM Buffer End Address */ + SK_U32 PXsQRamStart; /* Sync Tx Queue RAM Buffer Start Address */ + SK_U32 PXsQRamEnd; /* Sync Tx Queue RAM Buffer End Address */ + SK_U32 PXaQRamStart; /* Async Tx Queue RAM Buffer Start Address */ + SK_U32 PXaQRamEnd; /* Async Tx Queue RAM Buffer End Address */ + SK_U32 PRxOverCnt; /* Receive Overflow Counter */ + int PRxQOff; /* Rx Queue Address Offset */ + int PXsQOff; /* Synchronous Tx Queue Address Offset */ + int PXaQOff; /* Asynchronous Tx Queue Address Offset */ + int PhyType; /* PHY used on this port */ + SK_U16 PhyId1; /* PHY Id1 on this port */ + SK_U16 PhyAddr; /* MDIO/MDC PHY address */ + SK_U16 PIsave; /* Saved Interrupt status word */ + SK_U16 PSsave; /* Saved PHY status word */ + SK_BOOL PHWLinkUp; /* The hardware Link is up (wiring) */ + SK_BOOL PState; /* Is port initialized ? */ + SK_BOOL PLinkBroken; /* Is Link broken ? */ + SK_BOOL PCheckPar; /* Do we check for parity errors ? */ + SK_BOOL HalfDupTimerActive; + SK_U8 PLinkCap; /* Link Capabilities */ + SK_U8 PLinkModeConf; /* Link Mode configured */ + SK_U8 PLinkMode; /* Link Mode currently used */ + SK_U8 PLinkModeStatus;/* Link Mode Status */ + SK_U8 PLinkSpeedCap; /* Link Speed Capabilities(10/100/1000 Mbps) */ + SK_U8 PLinkSpeed; /* configured Link Speed (10/100/1000 Mbps) */ + SK_U8 PLinkSpeedUsed; /* current Link Speed (10/100/1000 Mbps) */ + SK_U8 PFlowCtrlCap; /* Flow Control Capabilities */ + SK_U8 PFlowCtrlMode; /* Flow Control Mode */ + SK_U8 PFlowCtrlStatus;/* Flow Control Status */ + SK_U8 PMSCap; /* Master/Slave Capabilities */ + SK_U8 PMSMode; /* Master/Slave Mode */ + SK_U8 PMSStatus; /* Master/Slave Status */ + SK_U8 PAutoNegFail; /* Auto-negotiation fail flag */ + SK_U8 PLipaAutoNeg; /* Auto-negotiation possible with Link Partner */ + SK_U8 PCableLen; /* Cable Length */ + SK_U8 PMdiPairLen[4]; /* MDI[0..3] Pair Length */ + SK_U8 PMdiPairSts[4]; /* MDI[0..3] Pair Diagnostic Status */ +} SK_GEPORT; + +/* + * Gigabit Ethernet Initialization Struct + * (has to be included in the adapter context) + */ +typedef struct s_GeInit { + SK_U8 GIPciHwRev; /* PCI HW Revision Number */ + SK_U8 GIChipId; /* Chip Identification Number */ + SK_U8 GIChipRev; /* Chip Revision Number */ + SK_BOOL GIGenesis; /* Genesis adapter ? */ + SK_BOOL GICopperType; /* Copper Type adapter ? */ + SK_BOOL GIPciSlot64; /* 64-bit PCI Slot */ + SK_BOOL GIPciClock66; /* 66 MHz PCI Clock */ + SK_BOOL GIVauxAvail; /* VAUX available (YUKON) */ + SK_BOOL GIYukon32Bit; /* 32-Bit YUKON adapter */ + SK_BOOL GIYukonLite; /* YUKON-Lite chip */ + int GIMacsFound; /* Number of MACs found on this adapter */ + int GIMacType; /* MAC Type used on this adapter */ + int GIHstClkFact; /* Host Clock Factor (62.5 / HstClk * 100) */ + int GIPortUsage; /* Driver Port Usage */ + int GILevel; /* Initialization Level completed */ + int GIRamSize; /* The RAM size of the adapter in kB */ + int GIWolOffs; /* WOL Register Offset (HW-Bug in Rev. A) */ + SK_U32 GIRamOffs; /* RAM Address Offset for addr calculation */ + SK_U32 GIPollTimerVal; /* Descr. Poll Timer Init Val (HstClk ticks) */ + SK_GEPORT GP[SK_MAX_MACS];/* Port Dependent Information */ + SK_GEMACFUNC GIFunc; /* MAC depedent functions */ +} SK_GEINIT; + +/* + * Error numbers and messages for skxmac2.c and skgeinit.c + */ +#define SKERR_HWI_E001 (SK_ERRBASE_HWINIT) +#define SKERR_HWI_E001MSG "SkXmClrExactAddr() has got illegal parameters" +#define SKERR_HWI_E002 (SKERR_HWI_E001+1) +#define SKERR_HWI_E002MSG "SkGeInit(): Level 1 call missing" +#define SKERR_HWI_E003 (SKERR_HWI_E002+1) +#define SKERR_HWI_E003MSG "SkGeInit() called with illegal init Level" +#define SKERR_HWI_E004 (SKERR_HWI_E003+1) +#define SKERR_HWI_E004MSG "SkGeInitPort(): Queue Size illegal configured" +#define SKERR_HWI_E005 (SKERR_HWI_E004+1) +#define SKERR_HWI_E005MSG "SkGeInitPort(): cannot init running ports" +#define SKERR_HWI_E006 (SKERR_HWI_E005+1) +#define SKERR_HWI_E006MSG "SkGeMacInit(): PState does not match HW state" +#define SKERR_HWI_E007 (SKERR_HWI_E006+1) +#define SKERR_HWI_E007MSG "SkXmInitDupMd() called with invalid Dup Mode" +#define SKERR_HWI_E008 (SKERR_HWI_E007+1) +#define SKERR_HWI_E008MSG "SkXmSetRxCmd() called with invalid Mode" +#define SKERR_HWI_E009 (SKERR_HWI_E008+1) +#define SKERR_HWI_E009MSG "SkGeCfgSync() called although PXSQSize zero" +#define SKERR_HWI_E010 (SKERR_HWI_E009+1) +#define SKERR_HWI_E010MSG "SkGeCfgSync() called with invalid parameters" +#define SKERR_HWI_E011 (SKERR_HWI_E010+1) +#define SKERR_HWI_E011MSG "SkGeInitPort(): Receive Queue Size too small" +#define SKERR_HWI_E012 (SKERR_HWI_E011+1) +#define SKERR_HWI_E012MSG "SkGeInitPort(): invalid Queue Size specified" +#define SKERR_HWI_E013 (SKERR_HWI_E012+1) +#define SKERR_HWI_E013MSG "SkGeInitPort(): cfg changed for running queue" +#define SKERR_HWI_E014 (SKERR_HWI_E013+1) +#define SKERR_HWI_E014MSG "SkGeInitPort(): unknown GIPortUsage specified" +#define SKERR_HWI_E015 (SKERR_HWI_E014+1) +#define SKERR_HWI_E015MSG "Illegal Link mode parameter" +#define SKERR_HWI_E016 (SKERR_HWI_E015+1) +#define SKERR_HWI_E016MSG "Illegal Flow control mode parameter" +#define SKERR_HWI_E017 (SKERR_HWI_E016+1) +#define SKERR_HWI_E017MSG "Illegal value specified for GIPollTimerVal" +#define SKERR_HWI_E018 (SKERR_HWI_E017+1) +#define SKERR_HWI_E018MSG "FATAL: SkGeStopPort() does not terminate (Tx)" +#define SKERR_HWI_E019 (SKERR_HWI_E018+1) +#define SKERR_HWI_E019MSG "Illegal Speed parameter" +#define SKERR_HWI_E020 (SKERR_HWI_E019+1) +#define SKERR_HWI_E020MSG "Illegal Master/Slave parameter" +#define SKERR_HWI_E021 (SKERR_HWI_E020+1) +#define SKERR_HWI_E021MSG "MacUpdateStats(): cannot update statistic counter" +#define SKERR_HWI_E022 (SKERR_HWI_E021+1) +#define SKERR_HWI_E022MSG "MacStatistic(): illegal statistic base address" +#define SKERR_HWI_E023 (SKERR_HWI_E022+1) +#define SKERR_HWI_E023MSG "SkGeInitPort(): Transmit Queue Size too small" +#define SKERR_HWI_E024 (SKERR_HWI_E023+1) +#define SKERR_HWI_E024MSG "FATAL: SkGeStopPort() does not terminate (Rx)" +#define SKERR_HWI_E025 (SKERR_HWI_E024+1) +#define SKERR_HWI_E025MSG "" + +/* function prototypes ********************************************************/ + +#ifndef SK_KR_PROTO + +/* + * public functions in skgeinit.c + */ +extern void SkGePollRxD( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_BOOL PollRxD); + +extern void SkGePollTxD( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_BOOL PollTxD); + +extern void SkGeYellowLED( + SK_AC *pAC, + SK_IOC IoC, + int State); + +extern int SkGeCfgSync( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_U32 IntTime, + SK_U32 LimCount, + int SyncMode); + +extern void SkGeLoadLnkSyncCnt( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_U32 CntVal); + +extern void SkGeStopPort( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int Dir, + int RstMode); + +extern int SkGeInit( + SK_AC *pAC, + SK_IOC IoC, + int Level); + +extern void SkGeDeInit( + SK_AC *pAC, + SK_IOC IoC); + +extern int SkGeInitPort( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkGeXmitLED( + SK_AC *pAC, + SK_IOC IoC, + int Led, + int Mode); + +extern void SkGeInitRamIface( + SK_AC *pAC, + SK_IOC IoC); + +extern int SkGeInitAssignRamToQueues( + SK_AC *pAC, + int ActivePort, + SK_BOOL DualNet); + +/* + * public functions in skxmac2.c + */ +extern void SkMacRxTxDisable( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkMacSoftRst( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkMacHardRst( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkXmInitMac( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkGmInitMac( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkMacInitPhy( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_BOOL DoLoop); + +extern void SkMacIrqDisable( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkMacFlushTxFifo( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkMacFlushRxFifo( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkMacIrq( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern int SkMacAutoNegDone( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkMacAutoNegLipaPhy( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_U16 IStatus); + +extern void SkMacSetRxTxEn( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int Para); + +extern int SkMacRxTxEnable( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkMacPromiscMode( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_BOOL Enable); + +extern void SkMacHashing( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_BOOL Enable); + +extern void SkXmPhyRead( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int Addr, + SK_U16 *pVal); + +extern void SkXmPhyWrite( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int Addr, + SK_U16 Val); + +extern void SkGmPhyRead( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int Addr, + SK_U16 *pVal); + +extern void SkGmPhyWrite( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int Addr, + SK_U16 Val); + +extern void SkGePhyRead( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int Addr, + SK_U16 *pVal); + +extern void SkGePhyWrite( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int Addr, + SK_U16 Val); + +extern void SkXmClrExactAddr( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int StartNum, + int StopNum); + +extern void SkXmInitDupMd( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkXmInitPauseMd( + SK_AC *pAC, + SK_IOC IoC, + int Port); + +extern void SkXmAutoNegLipaXmac( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_U16 IStatus); + +extern int SkXmUpdateStats( + SK_AC *pAC, + SK_IOC IoC, + unsigned int Port); + +extern int SkGmUpdateStats( + SK_AC *pAC, + SK_IOC IoC, + unsigned int Port); + +extern int SkXmMacStatistic( + SK_AC *pAC, + SK_IOC IoC, + unsigned int Port, + SK_U16 StatAddr, + SK_U32 *pVal); + +extern int SkGmMacStatistic( + SK_AC *pAC, + SK_IOC IoC, + unsigned int Port, + SK_U16 StatAddr, + SK_U32 *pVal); + +extern int SkXmResetCounter( + SK_AC *pAC, + SK_IOC IoC, + unsigned int Port); + +extern int SkGmResetCounter( + SK_AC *pAC, + SK_IOC IoC, + unsigned int Port); + +extern int SkXmOverflowStatus( + SK_AC *pAC, + SK_IOC IoC, + unsigned int Port, + SK_U16 IStatus, + SK_U64 *pStatus); + +extern int SkGmOverflowStatus( + SK_AC *pAC, + SK_IOC IoC, + unsigned int Port, + SK_U16 MacStatus, + SK_U64 *pStatus); + +extern int SkGmCableDiagStatus( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_BOOL StartTest); + +#ifdef SK_DIAG +extern void SkMacSetRxCmd( + SK_AC *pAC, + SK_IOC IoC, + int Port, + int Mode); +extern void SkMacCrcGener( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_BOOL Enable); +extern void SkMacTimeStamp( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_BOOL Enable); +extern void SkXmSendCont( + SK_AC *pAC, + SK_IOC IoC, + int Port, + SK_BOOL Enable); +#endif /* SK_DIAG */ + +#else /* SK_KR_PROTO */ + +/* + * public functions in skgeinit.c + */ +extern void SkGePollRxD(); +extern void SkGePollTxD(); +extern void SkGeYellowLED(); +extern int SkGeCfgSync(); +extern void SkGeLoadLnkSyncCnt(); +extern void SkGeStopPort(); +extern int SkGeInit(); +extern void SkGeDeInit(); +extern int SkGeInitPort(); +extern void SkGeXmitLED(); +extern void SkGeInitRamIface(); +extern int SkGeInitAssignRamToQueues(); + +/* + * public functions in skxmac2.c + */ +extern void SkMacRxTxDisable(); +extern void SkMacSoftRst(); +extern void SkMacHardRst(); +extern void SkMacInitPhy(); +extern int SkMacRxTxEnable(); +extern void SkMacPromiscMode(); +extern void SkMacHashing(); +extern void SkMacIrqDisable(); +extern void SkMacFlushTxFifo(); +extern void SkMacFlushRxFifo(); +extern void SkMacIrq(); +extern int SkMacAutoNegDone(); +extern void SkMacAutoNegLipaPhy(); +extern void SkMacSetRxTxEn(); +extern void SkGePhyRead(); +extern void SkGePhyWrite(); +extern void SkXmInitMac(); +extern void SkXmPhyRead(); +extern void SkXmPhyWrite(); +extern void SkGmInitMac(); +extern void SkGmPhyRead(); +extern void SkGmPhyWrite(); +extern void SkXmClrExactAddr(); +extern void SkXmInitDupMd(); +extern void SkXmInitPauseMd(); +extern void SkXmAutoNegLipaXmac(); +extern int SkXmUpdateStats(); +extern int SkGmUpdateStats(); +extern int SkXmMacStatistic(); +extern int SkGmMacStatistic(); +extern int SkXmResetCounter(); +extern int SkGmResetCounter(); +extern int SkXmOverflowStatus(); +extern int SkGmOverflowStatus(); +extern int SkGmCableDiagStatus(); + +#ifdef SK_DIAG +extern void SkMacSetRxCmd(); +extern void SkMacCrcGener(); +extern void SkMacTimeStamp(); +extern void SkXmSendCont(); +#endif /* SK_DIAG */ + +#endif /* SK_KR_PROTO */ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __INC_SKGEINIT_H_ */ diff --git a/drivers/net/sk98lin/h/skgepnm2.h b/drivers/net/sk98lin/h/skgepnm2.h new file mode 100644 index 0000000000..5c44f47719 --- /dev/null +++ b/drivers/net/sk98lin/h/skgepnm2.h @@ -0,0 +1,462 @@ +/***************************************************************************** + * + * Name: skgepnm2.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.34 $ + * Date: $Date: 2002/12/16 09:05:18 $ + * Purpose: Defines for Private Network Management Interface + * + ****************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2001 SysKonnect GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/***************************************************************************** + * + * History: + * + * $Log: skgepnm2.h,v $ + * Revision 1.34 2002/12/16 09:05:18 tschilli + * Code for VCT handling added. + * + * Revision 1.33 2002/09/10 09:00:03 rwahl + * Adapted boolean definitions according sktypes. + * + * Revision 1.32 2002/08/09 09:47:01 rwahl + * Added write-only flag to oid access defines. + * Editorial changes. + * + * Revision 1.31 2002/07/17 19:23:18 rwahl + * - Replaced MAC counter definitions by enumeration. + * - Added definition SK_PNMI_MAC_TYPES. + * - Added chipset defnition for Yukon. + * + * Revision 1.30 2001/02/06 10:03:41 mkunz + * - Pnmi V4 dual net support added. Interface functions and macros extended + * - Vpd bug fixed + * - OID_SKGE_MTU added + * + * Revision 1.29 2001/01/22 13:41:37 rassmann + * Supporting two nets on dual-port adapters. + * + * Revision 1.28 2000/08/03 15:12:48 rwahl + * - Additional comment for MAC statistic data structure. + * + * Revision 1.27 2000/08/01 16:10:18 rwahl + * - Added mac statistic data structure for StatRxLongFrame counter. + * + * Revision 1.26 2000/03/31 13:51:34 rwahl + * Added SK_UPTR cast to offset calculation for PNMI struct fields; + * missing cast caused compiler warnings by Win64 compiler. + * + * Revision 1.25 1999/11/22 13:57:41 cgoos + * Changed license header to GPL. + * Allowing overwrite for SK_PNMI_STORE/_READ defines. + * + * Revision 1.24 1999/04/13 15:11:11 mhaveman + * Changed copyright. + * + * Revision 1.23 1999/01/28 15:07:12 mhaveman + * Changed default threshold for port switches per hour from 10 + * to 240 which means 4 switches per minute. This fits better + * the granularity of 32 for the port switch estimate + * counter. + * + * Revision 1.22 1999/01/05 12:52:30 mhaveman + * Removed macro SK_PNMI_MICRO_SEC. + * + * Revision 1.21 1999/01/05 12:50:34 mhaveman + * Enlarged macro definition SK_PNMI_HUNDREDS_SEC() so that no 64-bit + * arithmetic is necessary if SK_TICKS_PER_SEC is 100. + * + * Revision 1.20 1998/12/09 14:02:53 mhaveman + * Defined macro SK_PNMI_DEF_RLMT_CHG_THRES for default port switch + * threshold. + * + * Revision 1.19 1998/12/03 11:28:41 mhaveman + * Removed SK_PNMI_CHECKPTR macro. + * + * Revision 1.18 1998/12/03 11:21:00 mhaveman + * -Added pointer check macro SK_PNMI_CHECKPTR + * -Added macros SK_PNMI_VPD_ARR_SIZE and SK_PNMI_VPD_STR_SIZE for + * VPD key evaluation. + * + * Revision 1.17 1998/11/20 13:20:33 mhaveman + * Fixed bug in SK_PNMI_SET_STAT macro. ErrorStatus was not correctly set. + * + * Revision 1.16 1998/11/20 08:08:49 mhaveman + * Macro SK_PNMI_CHECKFLAGS has got a if clause. + * + * Revision 1.15 1998/11/03 13:53:40 mhaveman + * Fixed alignment problem in macor SK_PNMI_SET_STAT macro. + * + * Revision 1.14 1998/10/30 15:50:13 mhaveman + * Added macro SK_PNMI_MICRO_SEC() + * + * Revision 1.13 1998/10/30 12:32:20 mhaveman + * Added forgotten cast in SK_PNMI_READ_U32 macro. + * + * Revision 1.12 1998/10/29 15:40:26 mhaveman + * -Changed SK_PNMI_TRAP_SENSOR_LEN because SensorDescr has now + * variable string length. + * -Defined SK_PNMI_CHECKFLAGS macro + * + * Revision 1.11 1998/10/29 08:53:34 mhaveman + * Removed SK_PNMI_RLM_XXX table indexed because these counters need + * not been saved over XMAC resets. + * + * Revision 1.10 1998/10/28 08:48:20 mhaveman + * -Added macros for storage according to alignment + * -Changed type of Instance to SK_U32 because of VPD + * -Removed trap structures. Not needed because of alignment problem + * -Changed type of Action form SK_U8 to int + * + * Revision 1.9 1998/10/21 13:34:45 mhaveman + * Shit, mismatched calculation of SK_PNMI_HUNDREDS_SEC. Corrected. + * + * Revision 1.8 1998/10/21 13:24:58 mhaveman + * Changed calculation of hundreds of seconds. + * + * Revision 1.7 1998/10/20 07:31:41 mhaveman + * Made type changes to unsigned int where possible. + * + * Revision 1.6 1998/09/04 17:04:05 mhaveman + * Added Sync counters to offset storage to provided settled values on + * port switch. + * + * Revision 1.5 1998/09/04 12:45:35 mhaveman + * Removed dummies for SK_DRIVER_ macros. They should be added by driver + * writer in skdrv2nd.h. + * + * Revision 1.4 1998/09/04 11:59:50 mhaveman + * Everything compiles now. Driver Macros for counting still missing. + * + * Revision 1.3 1998/08/24 12:01:35 mhaveman + * Intermediate state. + * + * Revision 1.2 1998/08/17 07:51:40 mhaveman + * Intermediate state. + * + * Revision 1.1 1998/08/11 09:08:40 mhaveman + * Intermediate state. + * + ****************************************************************************/ + +#ifndef _SKGEPNM2_H_ +#define _SKGEPNM2_H_ + +/* + * General definitions + */ +#define SK_PNMI_CHIPSET_XMAC 1 /* XMAC11800FP */ +#define SK_PNMI_CHIPSET_YUKON 2 /* YUKON */ + +#define SK_PNMI_BUS_PCI 1 /* PCI bus*/ + +/* + * Actions + */ +#define SK_PNMI_ACT_IDLE 1 +#define SK_PNMI_ACT_RESET 2 +#define SK_PNMI_ACT_SELFTEST 3 +#define SK_PNMI_ACT_RESETCNT 4 + +/* + * VPD releated defines + */ + +#define SK_PNMI_VPD_RW 1 +#define SK_PNMI_VPD_RO 2 + +#define SK_PNMI_VPD_OK 0 +#define SK_PNMI_VPD_NOTFOUND 1 +#define SK_PNMI_VPD_CUT 2 +#define SK_PNMI_VPD_TIMEOUT 3 +#define SK_PNMI_VPD_FULL 4 +#define SK_PNMI_VPD_NOWRITE 5 +#define SK_PNMI_VPD_FATAL 6 + +#define SK_PNMI_VPD_IGNORE 0 +#define SK_PNMI_VPD_CREATE 1 +#define SK_PNMI_VPD_DELETE 2 + + +/* + * RLMT related defines + */ +#define SK_PNMI_DEF_RLMT_CHG_THRES 240 /* 4 changes per minute */ + + +/* + * VCT internal status values + */ +#define SK_PNMI_VCT_PENDING 32 +#define SK_PNMI_VCT_TEST_DONE 64 +#define SK_PNMI_VCT_LINK 128 + +/* + * Internal table definitions + */ +#define SK_PNMI_GET 0 +#define SK_PNMI_PRESET 1 +#define SK_PNMI_SET 2 + +#define SK_PNMI_RO 0 +#define SK_PNMI_RW 1 +#define SK_PNMI_WO 2 + +typedef struct s_OidTabEntry { + SK_U32 Id; + SK_U32 InstanceNo; + unsigned int StructSize; + unsigned int Offset; + int Access; + int (* Func)(SK_AC *pAc, SK_IOC pIo, int action, + SK_U32 Id, char* pBuf, unsigned int* pLen, + SK_U32 Instance, unsigned int TableIndex, + SK_U32 NetNumber); + SK_U16 Param; +} SK_PNMI_TAB_ENTRY; + + +/* + * Trap lengths + */ +#define SK_PNMI_TRAP_SIMPLE_LEN 17 +#define SK_PNMI_TRAP_SENSOR_LEN_BASE 46 +#define SK_PNMI_TRAP_RLMT_CHANGE_LEN 23 +#define SK_PNMI_TRAP_RLMT_PORT_LEN 23 + +/* + * Number of MAC types supported + */ +#define SK_PNMI_MAC_TYPES (SK_MAC_GMAC + 1) + +/* + * MAC statistic data list (overall set for MAC types used) + */ +enum SK_MACSTATS { + SK_PNMI_HTX = 0, + SK_PNMI_HTX_OCTET, + SK_PNMI_HTX_OCTETHIGH = SK_PNMI_HTX_OCTET, + SK_PNMI_HTX_OCTETLOW, + SK_PNMI_HTX_BROADCAST, + SK_PNMI_HTX_MULTICAST, + SK_PNMI_HTX_UNICAST, + SK_PNMI_HTX_BURST, + SK_PNMI_HTX_PMACC, + SK_PNMI_HTX_MACC, + SK_PNMI_HTX_COL, + SK_PNMI_HTX_SINGLE_COL, + SK_PNMI_HTX_MULTI_COL, + SK_PNMI_HTX_EXCESS_COL, + SK_PNMI_HTX_LATE_COL, + SK_PNMI_HTX_DEFFERAL, + SK_PNMI_HTX_EXCESS_DEF, + SK_PNMI_HTX_UNDERRUN, + SK_PNMI_HTX_CARRIER, + SK_PNMI_HTX_UTILUNDER, + SK_PNMI_HTX_UTILOVER, + SK_PNMI_HTX_64, + SK_PNMI_HTX_127, + SK_PNMI_HTX_255, + SK_PNMI_HTX_511, + SK_PNMI_HTX_1023, + SK_PNMI_HTX_MAX, + SK_PNMI_HTX_LONGFRAMES, + SK_PNMI_HTX_SYNC, + SK_PNMI_HTX_SYNC_OCTET, + SK_PNMI_HTX_RESERVED, + + SK_PNMI_HRX, + SK_PNMI_HRX_OCTET, + SK_PNMI_HRX_OCTETHIGH = SK_PNMI_HRX_OCTET, + SK_PNMI_HRX_OCTETLOW, + SK_PNMI_HRX_BADOCTET, + SK_PNMI_HRX_BADOCTETHIGH = SK_PNMI_HRX_BADOCTET, + SK_PNMI_HRX_BADOCTETLOW, + SK_PNMI_HRX_BROADCAST, + SK_PNMI_HRX_MULTICAST, + SK_PNMI_HRX_UNICAST, + SK_PNMI_HRX_PMACC, + SK_PNMI_HRX_MACC, + SK_PNMI_HRX_PMACC_ERR, + SK_PNMI_HRX_MACC_UNKWN, + SK_PNMI_HRX_BURST, + SK_PNMI_HRX_MISSED, + SK_PNMI_HRX_FRAMING, + SK_PNMI_HRX_UNDERSIZE, + SK_PNMI_HRX_OVERFLOW, + SK_PNMI_HRX_JABBER, + SK_PNMI_HRX_CARRIER, + SK_PNMI_HRX_IRLENGTH, + SK_PNMI_HRX_SYMBOL, + SK_PNMI_HRX_SHORTS, + SK_PNMI_HRX_RUNT, + SK_PNMI_HRX_TOO_LONG, + SK_PNMI_HRX_FCS, + SK_PNMI_HRX_CEXT, + SK_PNMI_HRX_UTILUNDER, + SK_PNMI_HRX_UTILOVER, + SK_PNMI_HRX_64, + SK_PNMI_HRX_127, + SK_PNMI_HRX_255, + SK_PNMI_HRX_511, + SK_PNMI_HRX_1023, + SK_PNMI_HRX_MAX, + SK_PNMI_HRX_LONGFRAMES, + + SK_PNMI_HRX_RESERVED, + + SK_PNMI_MAX_IDX /* NOTE: Ensure SK_PNMI_CNT_NO is set to this value */ +}; + +/* + * MAC specific data + */ +typedef struct s_PnmiStatAddr { + SK_U16 Reg; /* MAC register containing the value */ + SK_BOOL GetOffset; /* TRUE: Offset managed by PNMI (call GetStatVal())*/ +} SK_PNMI_STATADDR; + + +/* + * SK_PNMI_STRUCT_DATA copy offset evaluation macros + */ +#define SK_PNMI_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_STRUCT_DATA *)0)->e)) +#define SK_PNMI_MAI_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_STRUCT_DATA *)0)->e)) +#define SK_PNMI_VPD_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_VPD *)0)->e)) +#define SK_PNMI_SEN_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_SENSOR *)0)->e)) +#define SK_PNMI_CHK_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_CHECKSUM *)0)->e)) +#define SK_PNMI_STA_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_STAT *)0)->e)) +#define SK_PNMI_CNF_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_CONF *)0)->e)) +#define SK_PNMI_RLM_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_RLMT *)0)->e)) +#define SK_PNMI_MON_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_RLMT_MONITOR *)0)->e)) +#define SK_PNMI_TRP_OFF(e) ((SK_U32)(SK_UPTR)&(((SK_PNMI_TRAP *)0)->e)) + +#define SK_PNMI_SET_STAT(b,s,o) {SK_U32 Val32; char *pVal; \ + Val32 = (s); \ + pVal = (char *)(b) + ((SK_U32)(SK_UPTR) \ + &(((SK_PNMI_STRUCT_DATA *)0)-> \ + ReturnStatus.ErrorStatus)); \ + SK_PNMI_STORE_U32(pVal, Val32); \ + Val32 = (o); \ + pVal = (char *)(b) + ((SK_U32)(SK_UPTR) \ + &(((SK_PNMI_STRUCT_DATA *)0)-> \ + ReturnStatus.ErrorOffset)); \ + SK_PNMI_STORE_U32(pVal, Val32);} + +/* + * Time macros + */ +#if SK_TICKS_PER_SEC == 100 +#define SK_PNMI_HUNDREDS_SEC(t) (t) +#else +#define SK_PNMI_HUNDREDS_SEC(t) (((t) * 100) / (SK_TICKS_PER_SEC)) +#endif + +/* + * Macros to work around alignment problems + */ +#ifndef SK_PNMI_STORE_U16 +#define SK_PNMI_STORE_U16(p,v) {*(char *)(p) = *((char *)&(v)); \ + *((char *)(p) + 1) = \ + *(((char *)&(v)) + 1);} +#endif + +#ifndef SK_PNMI_STORE_U32 +#define SK_PNMI_STORE_U32(p,v) {*(char *)(p) = *((char *)&(v)); \ + *((char *)(p) + 1) = \ + *(((char *)&(v)) + 1); \ + *((char *)(p) + 2) = \ + *(((char *)&(v)) + 2); \ + *((char *)(p) + 3) = \ + *(((char *)&(v)) + 3);} +#endif + +#ifndef SK_PNMI_STORE_U64 +#define SK_PNMI_STORE_U64(p,v) {*(char *)(p) = *((char *)&(v)); \ + *((char *)(p) + 1) = \ + *(((char *)&(v)) + 1); \ + *((char *)(p) + 2) = \ + *(((char *)&(v)) + 2); \ + *((char *)(p) + 3) = \ + *(((char *)&(v)) + 3); \ + *((char *)(p) + 4) = \ + *(((char *)&(v)) + 4); \ + *((char *)(p) + 5) = \ + *(((char *)&(v)) + 5); \ + *((char *)(p) + 6) = \ + *(((char *)&(v)) + 6); \ + *((char *)(p) + 7) = \ + *(((char *)&(v)) + 7);} +#endif + +#ifndef SK_PNMI_READ_U16 +#define SK_PNMI_READ_U16(p,v) {*((char *)&(v)) = *(char *)(p); \ + *(((char *)&(v)) + 1) = \ + *((char *)(p) + 1);} +#endif + +#ifndef SK_PNMI_READ_U32 +#define SK_PNMI_READ_U32(p,v) {*((char *)&(v)) = *(char *)(p); \ + *(((char *)&(v)) + 1) = \ + *((char *)(p) + 1); \ + *(((char *)&(v)) + 2) = \ + *((char *)(p) + 2); \ + *(((char *)&(v)) + 3) = \ + *((char *)(p) + 3);} +#endif + +#ifndef SK_PNMI_READ_U64 +#define SK_PNMI_READ_U64(p,v) {*((char *)&(v)) = *(char *)(p); \ + *(((char *)&(v)) + 1) = \ + *((char *)(p) + 1); \ + *(((char *)&(v)) + 2) = \ + *((char *)(p) + 2); \ + *(((char *)&(v)) + 3) = \ + *((char *)(p) + 3); \ + *(((char *)&(v)) + 4) = \ + *((char *)(p) + 4); \ + *(((char *)&(v)) + 5) = \ + *((char *)(p) + 5); \ + *(((char *)&(v)) + 6) = \ + *((char *)(p) + 6); \ + *(((char *)&(v)) + 7) = \ + *((char *)(p) + 7);} +#endif + +/* + * Macros for Debug + */ +#ifdef DEBUG + +#define SK_PNMI_CHECKFLAGS(vSt) {if (pAC->Pnmi.MacUpdatedFlag > 0 || \ + pAC->Pnmi.RlmtUpdatedFlag > 0 || \ + pAC->Pnmi.SirqUpdatedFlag > 0) { \ + SK_DBG_MSG(pAC, \ + SK_DBGMOD_PNMI, \ + SK_DBGCAT_CTRL, \ + ("PNMI: ERR: %s MacUFlag=%d, RlmtUFlag=%d, SirqUFlag=%d\n", \ + vSt, \ + pAC->Pnmi.MacUpdatedFlag, \ + pAC->Pnmi.RlmtUpdatedFlag, \ + pAC->Pnmi.SirqUpdatedFlag))}} + +#else /* !DEBUG */ + +#define SK_PNMI_CHECKFLAGS(vSt) /* Nothing */ + +#endif /* !DEBUG */ + +#endif /* _SKGEPNM2_H_ */ diff --git a/drivers/net/sk98lin/h/skgepnmi.h b/drivers/net/sk98lin/h/skgepnmi.h new file mode 100644 index 0000000000..7532313ba8 --- /dev/null +++ b/drivers/net/sk98lin/h/skgepnmi.h @@ -0,0 +1,1114 @@ +/***************************************************************************** + * + * Name: skgepnmi.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.59 $ + * Date: $Date: 2002/12/16 14:03:50 $ + * Purpose: Defines for Private Network Management Interface + * + ****************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2001 SysKonnect GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/***************************************************************************** + * + * History: + * + * $Log: skgepnmi.h,v $ + * Revision 1.59 2002/12/16 14:03:50 tschilli + * New defines for VCT added. + * + * Revision 1.58 2002/12/16 09:04:59 tschilli + * Code for VCT handling added. + * + * Revision 1.57 2002/09/26 12:41:05 tschilli + * SK_PNMI_PORT BufPort entry in struct SK_PNMI added. + * + * Revision 1.56 2002/08/16 11:10:41 rwahl + * - Replaced c++ comment. + * + * Revision 1.55 2002/08/09 15:40:21 rwahl + * Editorial change (renamed ConfSpeedCap). + * + * Revision 1.54 2002/08/09 11:06:07 rwahl + * Added OID_SKGE_SPEED_CAP. + * + * Revision 1.53 2002/08/09 09:45:28 rwahl + * Added support for NDIS OID_PNP_xxx. + * Editorial changes. + * + * Revision 1.52 2002/08/06 17:54:07 rwahl + * - Added speed cap to PNMI config struct. + * + * Revision 1.51 2002/07/17 19:19:26 rwahl + * - Added OID_SKGE_SPEED_MODE and OID_SKGE_SPEED_STATUS. + * - Added SK_PNMI_CNT_RX_PMACC_ERR() & SK_PNMI_CNT_RX_LONGFRAMES(). + * - Added speed mode & status to PNMI config struct. + * - Editorial changes. + * + * Revision 1.50 2002/05/22 08:59:37 rwahl + * Added string definitions for error msgs. + * + * Revision 1.49 2001/11/20 09:23:50 rwahl + * - pnmi struct: reordered and aligned to 32bit. + * + * Revision 1.48 2001/02/23 14:34:24 mkunz + * Changed macro PHYS2INST. Added pAC to Interface + * + * Revision 1.47 2001/02/07 08:28:23 mkunz + * - Added Oids: OID_SKGE_DIAG_ACTION + * OID_SKGE_DIAG_RESULT + * OID_SKGE_MULTICAST_LIST + * OID_SKGE_CURRENT_PACKET_FILTER + * OID_SKGE_INTERMEDIATE_SUPPORT + * - Changed value of OID_SKGE_MTU + * + * Revision 1.46 2001/02/06 10:01:41 mkunz + * - Pnmi V4 dual net support added. Interface functions and macros extended + * - Vpd bug fixed + * - OID_SKGE_MTU added + * + * Revision 1.45 2001/01/22 13:41:37 rassmann + * Supporting two nets on dual-port adapters. + * + * Revision 1.44 2000/09/07 07:35:27 rwahl + * - removed NDIS counter specific data type. + * - fixed spelling for OID_SKGE_RLMT_PORT_PREFERRED. + * + * Revision 1.43 2000/08/04 11:41:08 rwahl + * - Fixed compiler warning (port is always >= 0) for macros + * SK_PNMI_CNT_RX_LONGFRAMES & SK_PNMI_CNT_SYNC_OCTETS + * + * Revision 1.42 2000/08/03 15:14:07 rwahl + * - Corrected error in driver macros addressing a physical port. + * + * Revision 1.41 2000/08/01 16:22:29 rwahl + * - Changed MDB version to 3.1. + * - Added definitions for StatRxLongFrames counter. + * - Added macro to be used by driver to count long frames received. + * - Added directive to control width (default = 32bit) of NDIS statistic + * counters (SK_NDIS_64BIT_CTR). + * + * Revision 1.40 2000/03/31 13:51:34 rwahl + * Added SK_UPTR cast to offset calculation for PNMI struct fields; + * missing cast caused compiler warnings by Win64 compiler. + * + * Revision 1.39 1999/12/06 10:09:47 rwahl + * Added new error log message. + * + * Revision 1.38 1999/11/22 13:57:55 cgoos + * Changed license header to GPL. + * + * Revision 1.37 1999/09/14 14:25:32 rwahl + * Set MDB version for 1000Base-T (sensors, Master/Slave) changes. + * + * Revision 1.36 1999/05/20 09:24:56 cgoos + * Changes for 1000Base-T (sensors, Master/Slave). + * + * Revision 1.35 1999/04/13 15:10:51 mhaveman + * Replaced RLMT macros SK_RLMT_CHECK_xxx again by those of PNMI to + * grant unified interface. But PNMI macros will store the same + * value as RLMT macros. + * + * Revision 1.34 1999/04/13 15:03:49 mhaveman + * -Changed copyright + * -Removed SK_PNMI_RLMT_MODE_CHK_xxx macros. Those of RLMT should be + * used. + * + * Revision 1.33 1999/03/23 10:41:02 mhaveman + * Changed comments. + * + * Revision 1.32 1999/01/25 15:01:33 mhaveman + * Added support for multiple simultaniously active ports. + * + * Revision 1.31 1999/01/19 10:06:26 mhaveman + * Added new error log message. + * + * Revision 1.30 1999/01/05 10:34:49 mhaveman + * Fixed little error in RlmtChangeEstimate calculation. + * + * Revision 1.29 1999/01/05 09:59:41 mhaveman + * Redesigned port switch average calculation to avoid 64bit + * arithmetic. + * + * Revision 1.28 1998/12/08 10:05:48 mhaveman + * Defined macro SK_PNMI_MIN_STRUCT_SIZE. + * + * Revision 1.27 1998/12/03 14:39:35 mhaveman + * Fixed problem that LSTAT was enumerated wrong. + * + * Revision 1.26 1998/12/03 11:19:51 mhaveman + * Changed contents of errlog message SK_PNMI_ERR016MSG + * + * Revision 1.25 1998/12/01 10:40:04 mhaveman + * Changed size of SensorNumber, ChecksumNumber and RlmtPortNumber in + * SK_PNMI_STRUCT_DATA to be conform with OID definition. + * + * Revision 1.24 1998/11/20 08:09:27 mhaveman + * Added macros to convert between logical, physical port indexes and + * instances. + * + * Revision 1.23 1998/11/10 13:41:13 mhaveman + * Needed to change interface, because NT driver needs a return value + * of needed buffer space on TOO_SHORT errors. Therefore all + * SkPnmiGet/Preset/Set functions now have a pointer to the length + * parameter, where the needed space on error is returned. + * + * Revision 1.22 1998/11/03 12:05:51 mhaveman + * Added pAC parameter to counter macors. + * + * Revision 1.21 1998/11/02 10:47:36 mhaveman + * Added syslog messages for internal errors. + * + * Revision 1.20 1998/10/30 15:49:36 mhaveman + * -Removed unused SK_PNMI_UTILIZATION_BASE and EstOldCnt. + * -Redefined SK_PNMI_CHG_EST_BASE to hundreds of seconds. + * + * Revision 1.19 1998/10/29 15:38:44 mhaveman + * Changed string lengths of PNMI_STRUCT_DATA structure because + * string OIDs are now encoded with leading length ocetet. + * + * Revision 1.18 1998/10/29 08:52:27 mhaveman + * -Added byte to strings in PNMI_STRUCT_DATA structure. + * -Shortened SK_PNMI_RLMT structure to SK_MAX_MACS elements. + * + * Revision 1.17 1998/10/28 08:49:50 mhaveman + * -Changed type of Instance back to SK_U32 because of VPD + * -Changed type from SK_U8 to char of PciBusSpeed, PciBusWidth, PMD, + * and Connector. + * + * Revision 1.16 1998/10/22 10:42:31 mhaveman + * -Removed (SK_U32) casts for OIDs + * -excluded NDIS OIDs when they are already defined with ifndef _NDIS_ + * + * Revision 1.15 1998/10/20 13:56:28 mhaveman + * Headerfile includes now directly other header files to comile correctly. + * + * Revision 1.14 1998/10/20 07:31:09 mhaveman + * Made type changes to unsigned int where possible. + * + * Revision 1.13 1998/10/19 10:53:13 mhaveman + * -Casted OID definitions to SK_U32 + * -Renamed RlmtMAC... to RlmtPort... + * -Changed wrong type of VpdEntriesList from SK_U32 to char * + * + * Revision 1.12 1998/10/13 07:42:27 mhaveman + * -Added OIDs OID_SKGE_TRAP_NUMBER and OID_SKGE_ALL_DATA + * -Removed old cvs history entries + * -Renamed MacNumber to PortNumber + * + * Revision 1.11 1998/10/07 10:55:24 mhaveman + * -Added OID_MDB_VERSION. Therefore was a renumbering of the VPD OIDs + * necessary. + * -Added OID_GEN_ Ids to support the windows driver. + * + * Revision 1.10 1998/09/30 13:41:10 mhaveman + * Renamed some OIDs to reduce usage of 'MAC' which is replaced by 'PORT'. + * + * Revision 1.9 1998/09/04 17:06:17 mhaveman + * -Added SyncCounter as macro. + * -Renamed OID_SKGE_.._NO_DESCR_CTS to OID_SKGE_.._NO_BUF_CTS. + * -Added macros for driver description and version strings. + * + * Revision 1.8 1998/09/04 14:36:52 mhaveman + * Added OIDs and Structure to access value of macro counters which are + * counted by the driver. + * + * Revision 1.7 1998/09/04 11:59:36 mhaveman + * Everything compiles now. Driver Macros for counting still missing. + * + ****************************************************************************/ + +#ifndef _SKGEPNMI_H_ +#define _SKGEPNMI_H_ + +/* + * Include dependencies + */ +#include "h/sktypes.h" +#include "h/skerror.h" +#include "h/sktimer.h" +#include "h/ski2c.h" +#include "h/skaddr.h" +#include "h/skrlmt.h" +#include "h/skvpd.h" + +/* + * Management Database Version + */ +#define SK_PNMI_MDB_VERSION 0x00030001 /* 3.1 */ + + +/* + * Event definitions + */ +#define SK_PNMI_EVT_SIRQ_OVERFLOW 1 /* Counter overflow */ +#define SK_PNMI_EVT_SEN_WAR_LOW 2 /* Lower war thres exceeded */ +#define SK_PNMI_EVT_SEN_WAR_UPP 3 /* Upper war thres exceeded */ +#define SK_PNMI_EVT_SEN_ERR_LOW 4 /* Lower err thres exceeded */ +#define SK_PNMI_EVT_SEN_ERR_UPP 5 /* Upper err thres exceeded */ +#define SK_PNMI_EVT_CHG_EST_TIMER 6 /* Timer event for RLMT Chg */ +#define SK_PNMI_EVT_UTILIZATION_TIMER 7 /* Timer event for Utiliza. */ +#define SK_PNMI_EVT_CLEAR_COUNTER 8 /* Clear statistic counters */ +#define SK_PNMI_EVT_XMAC_RESET 9 /* XMAC will be reset */ + +#define SK_PNMI_EVT_RLMT_PORT_UP 10 /* Port came logically up */ +#define SK_PNMI_EVT_RLMT_PORT_DOWN 11 /* Port went logically down */ +#define SK_PNMI_EVT_RLMT_SEGMENTATION 13 /* Two SP root bridges found */ +#define SK_PNMI_EVT_RLMT_ACTIVE_DOWN 14 /* Port went logically down */ +#define SK_PNMI_EVT_RLMT_ACTIVE_UP 15 /* Port came logically up */ +#define SK_PNMI_EVT_RLMT_SET_NETS 16 /* 1. Parameter is number of nets + 1 = single net; 2 = dual net */ +#define SK_PNMI_EVT_VCT_RESET 17 /* VCT port reset timer event started with SET. */ + + +/* + * Return values + */ +#define SK_PNMI_ERR_OK 0 +#define SK_PNMI_ERR_GENERAL 1 +#define SK_PNMI_ERR_TOO_SHORT 2 +#define SK_PNMI_ERR_BAD_VALUE 3 +#define SK_PNMI_ERR_READ_ONLY 4 +#define SK_PNMI_ERR_UNKNOWN_OID 5 +#define SK_PNMI_ERR_UNKNOWN_INST 6 +#define SK_PNMI_ERR_UNKNOWN_NET 7 + + +/* + * Return values of driver reset function SK_DRIVER_RESET() and + * driver event function SK_DRIVER_EVENT() + */ +#define SK_PNMI_ERR_OK 0 +#define SK_PNMI_ERR_FAIL 1 + + +/* + * Return values of driver test function SK_DRIVER_SELFTEST() + */ +#define SK_PNMI_TST_UNKNOWN (1 << 0) +#define SK_PNMI_TST_TRANCEIVER (1 << 1) +#define SK_PNMI_TST_ASIC (1 << 2) +#define SK_PNMI_TST_SENSOR (1 << 3) +#define SK_PNMI_TST_POWERMGMT (1 << 4) +#define SK_PNMI_TST_PCI (1 << 5) +#define SK_PNMI_TST_MAC (1 << 6) + + +/* + * RLMT specific definitions + */ +#define SK_PNMI_RLMT_STATUS_STANDBY 1 +#define SK_PNMI_RLMT_STATUS_ACTIVE 2 +#define SK_PNMI_RLMT_STATUS_ERROR 3 + +#define SK_PNMI_RLMT_LSTAT_PHY_DOWN 1 +#define SK_PNMI_RLMT_LSTAT_AUTONEG 2 +#define SK_PNMI_RLMT_LSTAT_LOG_DOWN 3 +#define SK_PNMI_RLMT_LSTAT_LOG_UP 4 +#define SK_PNMI_RLMT_LSTAT_INDETERMINATED 5 + +#define SK_PNMI_RLMT_MODE_CHK_LINK (SK_RLMT_CHECK_LINK) +#define SK_PNMI_RLMT_MODE_CHK_RX (SK_RLMT_CHECK_LOC_LINK) +#define SK_PNMI_RLMT_MODE_CHK_SPT (SK_RLMT_CHECK_SEG) +/* #define SK_PNMI_RLMT_MODE_CHK_EX */ + +/* + * OID definition + */ +#ifndef _NDIS_ /* Check, whether NDIS already included OIDs */ + +#define OID_GEN_XMIT_OK 0x00020101 +#define OID_GEN_RCV_OK 0x00020102 +#define OID_GEN_XMIT_ERROR 0x00020103 +#define OID_GEN_RCV_ERROR 0x00020104 +#define OID_GEN_RCV_NO_BUFFER 0x00020105 + +/* #define OID_GEN_DIRECTED_BYTES_XMIT 0x00020201 */ +#define OID_GEN_DIRECTED_FRAMES_XMIT 0x00020202 +/* #define OID_GEN_MULTICAST_BYTES_XMIT 0x00020203 */ +#define OID_GEN_MULTICAST_FRAMES_XMIT 0x00020204 +/* #define OID_GEN_BROADCAST_BYTES_XMIT 0x00020205 */ +#define OID_GEN_BROADCAST_FRAMES_XMIT 0x00020206 +/* #define OID_GEN_DIRECTED_BYTES_RCV 0x00020207 */ +#define OID_GEN_DIRECTED_FRAMES_RCV 0x00020208 +/* #define OID_GEN_MULTICAST_BYTES_RCV 0x00020209 */ +#define OID_GEN_MULTICAST_FRAMES_RCV 0x0002020A +/* #define OID_GEN_BROADCAST_BYTES_RCV 0x0002020B */ +#define OID_GEN_BROADCAST_FRAMES_RCV 0x0002020C +#define OID_GEN_RCV_CRC_ERROR 0x0002020D +#define OID_GEN_TRANSMIT_QUEUE_LENGTH 0x0002020E + +#define OID_802_3_PERMANENT_ADDRESS 0x01010101 +#define OID_802_3_CURRENT_ADDRESS 0x01010102 +/* #define OID_802_3_MULTICAST_LIST 0x01010103 */ +/* #define OID_802_3_MAXIMUM_LIST_SIZE 0x01010104 */ +/* #define OID_802_3_MAC_OPTIONS 0x01010105 */ + +#define OID_802_3_RCV_ERROR_ALIGNMENT 0x01020101 +#define OID_802_3_XMIT_ONE_COLLISION 0x01020102 +#define OID_802_3_XMIT_MORE_COLLISIONS 0x01020103 +#define OID_802_3_XMIT_DEFERRED 0x01020201 +#define OID_802_3_XMIT_MAX_COLLISIONS 0x01020202 +#define OID_802_3_RCV_OVERRUN 0x01020203 +#define OID_802_3_XMIT_UNDERRUN 0x01020204 +#define OID_802_3_XMIT_TIMES_CRS_LOST 0x01020206 +#define OID_802_3_XMIT_LATE_COLLISIONS 0x01020207 + +/* + * PnP and PM OIDs + */ +#ifdef SK_POWER_MGMT +#define OID_PNP_CAPABILITIES 0xFD010100 +#define OID_PNP_SET_POWER 0xFD010101 +#define OID_PNP_QUERY_POWER 0xFD010102 +#define OID_PNP_ADD_WAKE_UP_PATTERN 0xFD010103 +#define OID_PNP_REMOVE_WAKE_UP_PATTERN 0xFD010104 +#define OID_PNP_ENABLE_WAKE_UP 0xFD010106 +#endif /* SK_POWER_MGMT */ + +#endif /* _NDIS_ */ + +#define OID_SKGE_MDB_VERSION 0xFF010100 +#define OID_SKGE_SUPPORTED_LIST 0xFF010101 +#define OID_SKGE_VPD_FREE_BYTES 0xFF010102 +#define OID_SKGE_VPD_ENTRIES_LIST 0xFF010103 +#define OID_SKGE_VPD_ENTRIES_NUMBER 0xFF010104 +#define OID_SKGE_VPD_KEY 0xFF010105 +#define OID_SKGE_VPD_VALUE 0xFF010106 +#define OID_SKGE_VPD_ACCESS 0xFF010107 +#define OID_SKGE_VPD_ACTION 0xFF010108 + +#define OID_SKGE_PORT_NUMBER 0xFF010110 +#define OID_SKGE_DEVICE_TYPE 0xFF010111 +#define OID_SKGE_DRIVER_DESCR 0xFF010112 +#define OID_SKGE_DRIVER_VERSION 0xFF010113 +#define OID_SKGE_HW_DESCR 0xFF010114 +#define OID_SKGE_HW_VERSION 0xFF010115 +#define OID_SKGE_CHIPSET 0xFF010116 +#define OID_SKGE_ACTION 0xFF010117 +#define OID_SKGE_RESULT 0xFF010118 +#define OID_SKGE_BUS_TYPE 0xFF010119 +#define OID_SKGE_BUS_SPEED 0xFF01011A +#define OID_SKGE_BUS_WIDTH 0xFF01011B +/* 0xFF01011C unused */ +#define OID_SKGE_DIAG_ACTION 0xFF01011D +#define OID_SKGE_DIAG_RESULT 0xFF01011E +#define OID_SKGE_MTU 0xFF01011F +#define OID_SKGE_PHYS_CUR_ADDR 0xFF010120 +#define OID_SKGE_PHYS_FAC_ADDR 0xFF010121 +#define OID_SKGE_PMD 0xFF010122 +#define OID_SKGE_CONNECTOR 0xFF010123 +#define OID_SKGE_LINK_CAP 0xFF010124 +#define OID_SKGE_LINK_MODE 0xFF010125 +#define OID_SKGE_LINK_MODE_STATUS 0xFF010126 +#define OID_SKGE_LINK_STATUS 0xFF010127 +#define OID_SKGE_FLOWCTRL_CAP 0xFF010128 +#define OID_SKGE_FLOWCTRL_MODE 0xFF010129 +#define OID_SKGE_FLOWCTRL_STATUS 0xFF01012A +#define OID_SKGE_PHY_OPERATION_CAP 0xFF01012B +#define OID_SKGE_PHY_OPERATION_MODE 0xFF01012C +#define OID_SKGE_PHY_OPERATION_STATUS 0xFF01012D +#define OID_SKGE_MULTICAST_LIST 0xFF01012E +#define OID_SKGE_CURRENT_PACKET_FILTER 0xFF01012F + +#define OID_SKGE_TRAP 0xFF010130 +#define OID_SKGE_TRAP_NUMBER 0xFF010131 + +#define OID_SKGE_RLMT_MODE 0xFF010140 +#define OID_SKGE_RLMT_PORT_NUMBER 0xFF010141 +#define OID_SKGE_RLMT_PORT_ACTIVE 0xFF010142 +#define OID_SKGE_RLMT_PORT_PREFERRED 0xFF010143 +#define OID_SKGE_INTERMEDIATE_SUPPORT 0xFF010160 + +#define OID_SKGE_SPEED_CAP 0xFF010170 +#define OID_SKGE_SPEED_MODE 0xFF010171 +#define OID_SKGE_SPEED_STATUS 0xFF010172 + +#define OID_SKGE_SENSOR_NUMBER 0xFF020100 +#define OID_SKGE_SENSOR_INDEX 0xFF020101 +#define OID_SKGE_SENSOR_DESCR 0xFF020102 +#define OID_SKGE_SENSOR_TYPE 0xFF020103 +#define OID_SKGE_SENSOR_VALUE 0xFF020104 +#define OID_SKGE_SENSOR_WAR_THRES_LOW 0xFF020105 +#define OID_SKGE_SENSOR_WAR_THRES_UPP 0xFF020106 +#define OID_SKGE_SENSOR_ERR_THRES_LOW 0xFF020107 +#define OID_SKGE_SENSOR_ERR_THRES_UPP 0xFF020108 +#define OID_SKGE_SENSOR_STATUS 0xFF020109 +#define OID_SKGE_SENSOR_WAR_CTS 0xFF02010A +#define OID_SKGE_SENSOR_ERR_CTS 0xFF02010B +#define OID_SKGE_SENSOR_WAR_TIME 0xFF02010C +#define OID_SKGE_SENSOR_ERR_TIME 0xFF02010D + +#define OID_SKGE_CHKSM_NUMBER 0xFF020110 +#define OID_SKGE_CHKSM_RX_OK_CTS 0xFF020111 +#define OID_SKGE_CHKSM_RX_UNABLE_CTS 0xFF020112 +#define OID_SKGE_CHKSM_RX_ERR_CTS 0xFF020113 +#define OID_SKGE_CHKSM_TX_OK_CTS 0xFF020114 +#define OID_SKGE_CHKSM_TX_UNABLE_CTS 0xFF020115 + +#define OID_SKGE_STAT_TX 0xFF020120 +#define OID_SKGE_STAT_TX_OCTETS 0xFF020121 +#define OID_SKGE_STAT_TX_BROADCAST 0xFF020122 +#define OID_SKGE_STAT_TX_MULTICAST 0xFF020123 +#define OID_SKGE_STAT_TX_UNICAST 0xFF020124 +#define OID_SKGE_STAT_TX_LONGFRAMES 0xFF020125 +#define OID_SKGE_STAT_TX_BURST 0xFF020126 +#define OID_SKGE_STAT_TX_PFLOWC 0xFF020127 +#define OID_SKGE_STAT_TX_FLOWC 0xFF020128 +#define OID_SKGE_STAT_TX_SINGLE_COL 0xFF020129 +#define OID_SKGE_STAT_TX_MULTI_COL 0xFF02012A +#define OID_SKGE_STAT_TX_EXCESS_COL 0xFF02012B +#define OID_SKGE_STAT_TX_LATE_COL 0xFF02012C +#define OID_SKGE_STAT_TX_DEFFERAL 0xFF02012D +#define OID_SKGE_STAT_TX_EXCESS_DEF 0xFF02012E +#define OID_SKGE_STAT_TX_UNDERRUN 0xFF02012F +#define OID_SKGE_STAT_TX_CARRIER 0xFF020130 +/* #define OID_SKGE_STAT_TX_UTIL 0xFF020131 */ +#define OID_SKGE_STAT_TX_64 0xFF020132 +#define OID_SKGE_STAT_TX_127 0xFF020133 +#define OID_SKGE_STAT_TX_255 0xFF020134 +#define OID_SKGE_STAT_TX_511 0xFF020135 +#define OID_SKGE_STAT_TX_1023 0xFF020136 +#define OID_SKGE_STAT_TX_MAX 0xFF020137 +#define OID_SKGE_STAT_TX_SYNC 0xFF020138 +#define OID_SKGE_STAT_TX_SYNC_OCTETS 0xFF020139 +#define OID_SKGE_STAT_RX 0xFF02013A +#define OID_SKGE_STAT_RX_OCTETS 0xFF02013B +#define OID_SKGE_STAT_RX_BROADCAST 0xFF02013C +#define OID_SKGE_STAT_RX_MULTICAST 0xFF02013D +#define OID_SKGE_STAT_RX_UNICAST 0xFF02013E +#define OID_SKGE_STAT_RX_PFLOWC 0xFF02013F +#define OID_SKGE_STAT_RX_FLOWC 0xFF020140 +#define OID_SKGE_STAT_RX_PFLOWC_ERR 0xFF020141 +#define OID_SKGE_STAT_RX_FLOWC_UNKWN 0xFF020142 +#define OID_SKGE_STAT_RX_BURST 0xFF020143 +#define OID_SKGE_STAT_RX_MISSED 0xFF020144 +#define OID_SKGE_STAT_RX_FRAMING 0xFF020145 +#define OID_SKGE_STAT_RX_OVERFLOW 0xFF020146 +#define OID_SKGE_STAT_RX_JABBER 0xFF020147 +#define OID_SKGE_STAT_RX_CARRIER 0xFF020148 +#define OID_SKGE_STAT_RX_IR_LENGTH 0xFF020149 +#define OID_SKGE_STAT_RX_SYMBOL 0xFF02014A +#define OID_SKGE_STAT_RX_SHORTS 0xFF02014B +#define OID_SKGE_STAT_RX_RUNT 0xFF02014C +#define OID_SKGE_STAT_RX_CEXT 0xFF02014D +#define OID_SKGE_STAT_RX_TOO_LONG 0xFF02014E +#define OID_SKGE_STAT_RX_FCS 0xFF02014F +/* #define OID_SKGE_STAT_RX_UTIL 0xFF020150 */ +#define OID_SKGE_STAT_RX_64 0xFF020151 +#define OID_SKGE_STAT_RX_127 0xFF020152 +#define OID_SKGE_STAT_RX_255 0xFF020153 +#define OID_SKGE_STAT_RX_511 0xFF020154 +#define OID_SKGE_STAT_RX_1023 0xFF020155 +#define OID_SKGE_STAT_RX_MAX 0xFF020156 +#define OID_SKGE_STAT_RX_LONGFRAMES 0xFF020157 + +#define OID_SKGE_RLMT_CHANGE_CTS 0xFF020160 +#define OID_SKGE_RLMT_CHANGE_TIME 0xFF020161 +#define OID_SKGE_RLMT_CHANGE_ESTIM 0xFF020162 +#define OID_SKGE_RLMT_CHANGE_THRES 0xFF020163 + +#define OID_SKGE_RLMT_PORT_INDEX 0xFF020164 +#define OID_SKGE_RLMT_STATUS 0xFF020165 +#define OID_SKGE_RLMT_TX_HELLO_CTS 0xFF020166 +#define OID_SKGE_RLMT_RX_HELLO_CTS 0xFF020167 +#define OID_SKGE_RLMT_TX_SP_REQ_CTS 0xFF020168 +#define OID_SKGE_RLMT_RX_SP_CTS 0xFF020169 + +#define OID_SKGE_RLMT_MONITOR_NUMBER 0xFF010150 +#define OID_SKGE_RLMT_MONITOR_INDEX 0xFF010151 +#define OID_SKGE_RLMT_MONITOR_ADDR 0xFF010152 +#define OID_SKGE_RLMT_MONITOR_ERRS 0xFF010153 +#define OID_SKGE_RLMT_MONITOR_TIMESTAMP 0xFF010154 +#define OID_SKGE_RLMT_MONITOR_ADMIN 0xFF010155 + +#define OID_SKGE_TX_SW_QUEUE_LEN 0xFF020170 +#define OID_SKGE_TX_SW_QUEUE_MAX 0xFF020171 +#define OID_SKGE_TX_RETRY 0xFF020172 +#define OID_SKGE_RX_INTR_CTS 0xFF020173 +#define OID_SKGE_TX_INTR_CTS 0xFF020174 +#define OID_SKGE_RX_NO_BUF_CTS 0xFF020175 +#define OID_SKGE_TX_NO_BUF_CTS 0xFF020176 +#define OID_SKGE_TX_USED_DESCR_NO 0xFF020177 +#define OID_SKGE_RX_DELIVERED_CTS 0xFF020178 +#define OID_SKGE_RX_OCTETS_DELIV_CTS 0xFF020179 +#define OID_SKGE_RX_HW_ERROR_CTS 0xFF02017A +#define OID_SKGE_TX_HW_ERROR_CTS 0xFF02017B +#define OID_SKGE_IN_ERRORS_CTS 0xFF02017C +#define OID_SKGE_OUT_ERROR_CTS 0xFF02017D +#define OID_SKGE_ERR_RECOVERY_CTS 0xFF02017E +#define OID_SKGE_SYSUPTIME 0xFF02017F + +#define OID_SKGE_ALL_DATA 0xFF020190 + +/* Defines for VCT. */ +#define OID_SKGE_VCT_GET 0xFF020200 +#define OID_SKGE_VCT_SET 0xFF020201 +#define OID_SKGE_VCT_STATUS 0xFF020202 + + +/* VCT struct to store a backup copy of VCT data after a port reset. */ +typedef struct s_PnmiVct { + SK_U8 VctStatus; + SK_U8 PCableLen; + SK_U32 PMdiPairLen[4]; + SK_U8 PMdiPairSts[4]; +} SK_PNMI_VCT; + + +/* VCT status values (to be given to CPA via OID_SKGE_VCT_STATUS). */ +#define SK_PNMI_VCT_NONE 0 +#define SK_PNMI_VCT_OLD_VCT_DATA 1 +#define SK_PNMI_VCT_NEW_VCT_DATA 2 +#define SK_PNMI_VCT_OLD_DSP_DATA 4 +#define SK_PNMI_VCT_NEW_DSP_DATA 8 +#define SK_PNMI_VCT_RUNNING 16 + + +/* VCT cable test status. */ +#define SK_PNMI_VCT_NORMAL_CABLE 0 +#define SK_PNMI_VCT_SHORT_CABLE 1 +#define SK_PNMI_VCT_OPEN_CABLE 2 +#define SK_PNMI_VCT_TEST_FAIL 3 +#define SK_PNMI_VCT_IMPEDANCE_MISMATCH 4 + +#define OID_SKGE_TRAP_SEN_WAR_LOW 500 +#define OID_SKGE_TRAP_SEN_WAR_UPP 501 +#define OID_SKGE_TRAP_SEN_ERR_LOW 502 +#define OID_SKGE_TRAP_SEN_ERR_UPP 503 +#define OID_SKGE_TRAP_RLMT_CHANGE_THRES 520 +#define OID_SKGE_TRAP_RLMT_CHANGE_PORT 521 +#define OID_SKGE_TRAP_RLMT_PORT_DOWN 522 +#define OID_SKGE_TRAP_RLMT_PORT_UP 523 +#define OID_SKGE_TRAP_RLMT_SEGMENTATION 524 + + +/* + * Define error numbers and messages for syslog + */ +#define SK_PNMI_ERR001 (SK_ERRBASE_PNMI + 1) +#define SK_PNMI_ERR001MSG "SkPnmiGetStruct: Unknown OID" +#define SK_PNMI_ERR002 (SK_ERRBASE_PNMI + 2) +#define SK_PNMI_ERR002MSG "SkPnmiGetStruct: Cannot read VPD keys" +#define SK_PNMI_ERR003 (SK_ERRBASE_PNMI + 3) +#define SK_PNMI_ERR003MSG "OidStruct: Called with wrong OID" +#define SK_PNMI_ERR004 (SK_ERRBASE_PNMI + 4) +#define SK_PNMI_ERR004MSG "OidStruct: Called with wrong action" +#define SK_PNMI_ERR005 (SK_ERRBASE_PNMI + 5) +#define SK_PNMI_ERR005MSG "Perform: Cannot reset driver" +#define SK_PNMI_ERR006 (SK_ERRBASE_PNMI + 6) +#define SK_PNMI_ERR006MSG "Perform: Unknown OID action command" +#define SK_PNMI_ERR007 (SK_ERRBASE_PNMI + 7) +#define SK_PNMI_ERR007MSG "General: Driver description not initialized" +#define SK_PNMI_ERR008 (SK_ERRBASE_PNMI + 8) +#define SK_PNMI_ERR008MSG "Addr: Tried to get unknown OID" +#define SK_PNMI_ERR009 (SK_ERRBASE_PNMI + 9) +#define SK_PNMI_ERR009MSG "Addr: Unknown OID" +#define SK_PNMI_ERR010 (SK_ERRBASE_PNMI + 10) +#define SK_PNMI_ERR010MSG "CsumStat: Unknown OID" +#define SK_PNMI_ERR011 (SK_ERRBASE_PNMI + 11) +#define SK_PNMI_ERR011MSG "SensorStat: Sensor descr string too long" +#define SK_PNMI_ERR012 (SK_ERRBASE_PNMI + 12) +#define SK_PNMI_ERR012MSG "SensorStat: Unknown OID" +#define SK_PNMI_ERR013 (SK_ERRBASE_PNMI + 13) +#define SK_PNMI_ERR013MSG "" +#define SK_PNMI_ERR014 (SK_ERRBASE_PNMI + 14) +#define SK_PNMI_ERR014MSG "Vpd: Cannot read VPD keys" +#define SK_PNMI_ERR015 (SK_ERRBASE_PNMI + 15) +#define SK_PNMI_ERR015MSG "Vpd: Internal array for VPD keys to small" +#define SK_PNMI_ERR016 (SK_ERRBASE_PNMI + 16) +#define SK_PNMI_ERR016MSG "Vpd: Key string too long" +#define SK_PNMI_ERR017 (SK_ERRBASE_PNMI + 17) +#define SK_PNMI_ERR017MSG "Vpd: Invalid VPD status pointer" +#define SK_PNMI_ERR018 (SK_ERRBASE_PNMI + 18) +#define SK_PNMI_ERR018MSG "Vpd: VPD data not valid" +#define SK_PNMI_ERR019 (SK_ERRBASE_PNMI + 19) +#define SK_PNMI_ERR019MSG "Vpd: VPD entries list string too long" +#define SK_PNMI_ERR021 (SK_ERRBASE_PNMI + 21) +#define SK_PNMI_ERR021MSG "Vpd: VPD data string too long" +#define SK_PNMI_ERR022 (SK_ERRBASE_PNMI + 22) +#define SK_PNMI_ERR022MSG "Vpd: VPD data string too long should be errored before" +#define SK_PNMI_ERR023 (SK_ERRBASE_PNMI + 23) +#define SK_PNMI_ERR023MSG "Vpd: Unknown OID in get action" +#define SK_PNMI_ERR024 (SK_ERRBASE_PNMI + 24) +#define SK_PNMI_ERR024MSG "Vpd: Unknown OID in preset/set action" +#define SK_PNMI_ERR025 (SK_ERRBASE_PNMI + 25) +#define SK_PNMI_ERR025MSG "Vpd: Cannot write VPD after modify entry" +#define SK_PNMI_ERR026 (SK_ERRBASE_PNMI + 26) +#define SK_PNMI_ERR026MSG "Vpd: Cannot update VPD" +#define SK_PNMI_ERR027 (SK_ERRBASE_PNMI + 27) +#define SK_PNMI_ERR027MSG "Vpd: Cannot delete VPD entry" +#define SK_PNMI_ERR028 (SK_ERRBASE_PNMI + 28) +#define SK_PNMI_ERR028MSG "Vpd: Cannot update VPD after delete entry" +#define SK_PNMI_ERR029 (SK_ERRBASE_PNMI + 29) +#define SK_PNMI_ERR029MSG "General: Driver description string too long" +#define SK_PNMI_ERR030 (SK_ERRBASE_PNMI + 30) +#define SK_PNMI_ERR030MSG "General: Driver version not initialized" +#define SK_PNMI_ERR031 (SK_ERRBASE_PNMI + 31) +#define SK_PNMI_ERR031MSG "General: Driver version string too long" +#define SK_PNMI_ERR032 (SK_ERRBASE_PNMI + 32) +#define SK_PNMI_ERR032MSG "General: Cannot read VPD Name for HW descr" +#define SK_PNMI_ERR033 (SK_ERRBASE_PNMI + 33) +#define SK_PNMI_ERR033MSG "General: HW description string too long" +#define SK_PNMI_ERR034 (SK_ERRBASE_PNMI + 34) +#define SK_PNMI_ERR034MSG "General: Unknown OID" +#define SK_PNMI_ERR035 (SK_ERRBASE_PNMI + 35) +#define SK_PNMI_ERR035MSG "Rlmt: Unknown OID" +#define SK_PNMI_ERR036 (SK_ERRBASE_PNMI + 36) +#define SK_PNMI_ERR036MSG "" +#define SK_PNMI_ERR037 (SK_ERRBASE_PNMI + 37) +#define SK_PNMI_ERR037MSG "Rlmt: SK_RLMT_MODE_CHANGE event return not 0" +#define SK_PNMI_ERR038 (SK_ERRBASE_PNMI + 38) +#define SK_PNMI_ERR038MSG "Rlmt: SK_RLMT_PREFPORT_CHANGE event return not 0" +#define SK_PNMI_ERR039 (SK_ERRBASE_PNMI + 39) +#define SK_PNMI_ERR039MSG "RlmtStat: Unknown OID" +#define SK_PNMI_ERR040 (SK_ERRBASE_PNMI + 40) +#define SK_PNMI_ERR040MSG "PowerManagement: Unknown OID" +#define SK_PNMI_ERR041 (SK_ERRBASE_PNMI + 41) +#define SK_PNMI_ERR041MSG "MacPrivateConf: Unknown OID" +#define SK_PNMI_ERR042 (SK_ERRBASE_PNMI + 42) +#define SK_PNMI_ERR042MSG "MacPrivateConf: SK_HWEV_SET_ROLE returned not 0" +#define SK_PNMI_ERR043 (SK_ERRBASE_PNMI + 43) +#define SK_PNMI_ERR043MSG "MacPrivateConf: SK_HWEV_SET_LMODE returned not 0" +#define SK_PNMI_ERR044 (SK_ERRBASE_PNMI + 44) +#define SK_PNMI_ERR044MSG "MacPrivateConf: SK_HWEV_SET_FLOWMODE returned not 0" +#define SK_PNMI_ERR045 (SK_ERRBASE_PNMI + 45) +#define SK_PNMI_ERR045MSG "MacPrivateConf: SK_HWEV_SET_SPEED returned not 0" +#define SK_PNMI_ERR046 (SK_ERRBASE_PNMI + 46) +#define SK_PNMI_ERR046MSG "Monitor: Unknown OID" +#define SK_PNMI_ERR047 (SK_ERRBASE_PNMI + 47) +#define SK_PNMI_ERR047MSG "SirqUpdate: Event function returns not 0" +#define SK_PNMI_ERR048 (SK_ERRBASE_PNMI + 48) +#define SK_PNMI_ERR048MSG "RlmtUpdate: Event function returns not 0" +#define SK_PNMI_ERR049 (SK_ERRBASE_PNMI + 49) +#define SK_PNMI_ERR049MSG "SkPnmiInit: Invalid size of 'CounterOffset' struct!!" +#define SK_PNMI_ERR050 (SK_ERRBASE_PNMI + 50) +#define SK_PNMI_ERR050MSG "SkPnmiInit: Invalid size of 'StatAddr' table!!" +#define SK_PNMI_ERR051 (SK_ERRBASE_PNMI + 51) +#define SK_PNMI_ERR051MSG "SkPnmiEvent: Port switch suspicious" +#define SK_PNMI_ERR052 (SK_ERRBASE_PNMI + 52) +#define SK_PNMI_ERR052MSG "" + +/* + * Management counter macros called by the driver + */ +#define SK_PNMI_SET_DRIVER_DESCR(pAC,v) ((pAC)->Pnmi.pDriverDescription = \ + (char *)(v)) + +#define SK_PNMI_SET_DRIVER_VER(pAC,v) ((pAC)->Pnmi.pDriverVersion = \ + (char *)(v)) + + +#define SK_PNMI_CNT_TX_QUEUE_LEN(pAC,v,p) \ + { \ + (pAC)->Pnmi.Port[p].TxSwQueueLen = (SK_U64)(v); \ + if ((pAC)->Pnmi.Port[p].TxSwQueueLen > (pAC)->Pnmi.Port[p].TxSwQueueMax) { \ + (pAC)->Pnmi.Port[p].TxSwQueueMax = (pAC)->Pnmi.Port[p].TxSwQueueLen; \ + } \ + } +#define SK_PNMI_CNT_TX_RETRY(pAC,p) (((pAC)->Pnmi.Port[p].TxRetryCts)++) +#define SK_PNMI_CNT_RX_INTR(pAC,p) (((pAC)->Pnmi.Port[p].RxIntrCts)++) +#define SK_PNMI_CNT_TX_INTR(pAC,p) (((pAC)->Pnmi.Port[p].TxIntrCts)++) +#define SK_PNMI_CNT_NO_RX_BUF(pAC,p) (((pAC)->Pnmi.Port[p].RxNoBufCts)++) +#define SK_PNMI_CNT_NO_TX_BUF(pAC,p) (((pAC)->Pnmi.Port[p].TxNoBufCts)++) +#define SK_PNMI_CNT_USED_TX_DESCR(pAC,v,p) \ + ((pAC)->Pnmi.Port[p].TxUsedDescrNo=(SK_U64)(v)); +#define SK_PNMI_CNT_RX_OCTETS_DELIVERED(pAC,v,p) \ + { \ + ((pAC)->Pnmi.Port[p].RxDeliveredCts)++; \ + (pAC)->Pnmi.Port[p].RxOctetsDeliveredCts += (SK_U64)(v); \ + } +#define SK_PNMI_CNT_ERR_RECOVERY(pAC,p) (((pAC)->Pnmi.Port[p].ErrRecoveryCts)++); + +#define SK_PNMI_CNT_SYNC_OCTETS(pAC,p,v) \ + { \ + if ((p) < SK_MAX_MACS) { \ + ((pAC)->Pnmi.Port[p].StatSyncCts)++; \ + (pAC)->Pnmi.Port[p].StatSyncOctetsCts += (SK_U64)(v); \ + } \ + } + +#define SK_PNMI_CNT_RX_LONGFRAMES(pAC,p) \ + { \ + if ((p) < SK_MAX_MACS) { \ + ((pAC)->Pnmi.Port[p].StatRxLongFrameCts++); \ + } \ + } + +#define SK_PNMI_CNT_RX_FRAMETOOLONG(pAC,p) \ + { \ + if ((p) < SK_MAX_MACS) { \ + ((pAC)->Pnmi.Port[p].StatRxFrameTooLongCts++); \ + } \ + } + +#define SK_PNMI_CNT_RX_PMACC_ERR(pAC,p) \ + { \ + if ((p) < SK_MAX_MACS) { \ + ((pAC)->Pnmi.Port[p].StatRxPMaccErr++); \ + } \ + } + +/* + * Conversion Macros + */ +#define SK_PNMI_PORT_INST2LOG(i) ((unsigned int)(i) - 1) +#define SK_PNMI_PORT_LOG2INST(l) ((unsigned int)(l) + 1) +#define SK_PNMI_PORT_PHYS2LOG(p) ((unsigned int)(p) + 1) +#define SK_PNMI_PORT_LOG2PHYS(pAC,l) ((unsigned int)(l) - 1) +#define SK_PNMI_PORT_PHYS2INST(pAC,p) \ + (pAC->Pnmi.DualNetActiveFlag ? 2 : ((unsigned int)(p) + 2)) +#define SK_PNMI_PORT_INST2PHYS(pAC,i) ((unsigned int)(i) - 2) + +/* + * Structure definition for SkPnmiGetStruct and SkPnmiSetStruct + */ +#define SK_PNMI_VPD_KEY_SIZE 5 +#define SK_PNMI_VPD_BUFSIZE (VPD_SIZE) +#define SK_PNMI_VPD_ENTRIES (VPD_SIZE / 4) +#define SK_PNMI_VPD_DATALEN 128 /* Number of data bytes */ + +#define SK_PNMI_MULTICAST_LISTLEN 64 +#define SK_PNMI_SENSOR_ENTRIES (SK_MAX_SENSORS) +#define SK_PNMI_CHECKSUM_ENTRIES 3 +#define SK_PNMI_MAC_ENTRIES (SK_MAX_MACS + 1) +#define SK_PNMI_MONITOR_ENTRIES 20 +#define SK_PNMI_TRAP_ENTRIES 10 +#define SK_PNMI_TRAPLEN 128 +#define SK_PNMI_STRINGLEN1 80 +#define SK_PNMI_STRINGLEN2 25 +#define SK_PNMI_TRAP_QUEUE_LEN 512 + +typedef struct s_PnmiVpd { + char VpdKey[SK_PNMI_VPD_KEY_SIZE]; + char VpdValue[SK_PNMI_VPD_DATALEN]; + SK_U8 VpdAccess; + SK_U8 VpdAction; +} SK_PNMI_VPD; + +typedef struct s_PnmiSensor { + SK_U8 SensorIndex; + char SensorDescr[SK_PNMI_STRINGLEN2]; + SK_U8 SensorType; + SK_U32 SensorValue; + SK_U32 SensorWarningThresholdLow; + SK_U32 SensorWarningThresholdHigh; + SK_U32 SensorErrorThresholdLow; + SK_U32 SensorErrorThresholdHigh; + SK_U8 SensorStatus; + SK_U64 SensorWarningCts; + SK_U64 SensorErrorCts; + SK_U64 SensorWarningTimestamp; + SK_U64 SensorErrorTimestamp; +} SK_PNMI_SENSOR; + +typedef struct s_PnmiChecksum { + SK_U64 ChecksumRxOkCts; + SK_U64 ChecksumRxUnableCts; + SK_U64 ChecksumRxErrCts; + SK_U64 ChecksumTxOkCts; + SK_U64 ChecksumTxUnableCts; +} SK_PNMI_CHECKSUM; + +typedef struct s_PnmiStat { + SK_U64 StatTxOkCts; + SK_U64 StatTxOctetsOkCts; + SK_U64 StatTxBroadcastOkCts; + SK_U64 StatTxMulticastOkCts; + SK_U64 StatTxUnicastOkCts; + SK_U64 StatTxLongFramesCts; + SK_U64 StatTxBurstCts; + SK_U64 StatTxPauseMacCtrlCts; + SK_U64 StatTxMacCtrlCts; + SK_U64 StatTxSingleCollisionCts; + SK_U64 StatTxMultipleCollisionCts; + SK_U64 StatTxExcessiveCollisionCts; + SK_U64 StatTxLateCollisionCts; + SK_U64 StatTxDeferralCts; + SK_U64 StatTxExcessiveDeferralCts; + SK_U64 StatTxFifoUnderrunCts; + SK_U64 StatTxCarrierCts; + SK_U64 Dummy1; /* StatTxUtilization */ + SK_U64 StatTx64Cts; + SK_U64 StatTx127Cts; + SK_U64 StatTx255Cts; + SK_U64 StatTx511Cts; + SK_U64 StatTx1023Cts; + SK_U64 StatTxMaxCts; + SK_U64 StatTxSyncCts; + SK_U64 StatTxSyncOctetsCts; + SK_U64 StatRxOkCts; + SK_U64 StatRxOctetsOkCts; + SK_U64 StatRxBroadcastOkCts; + SK_U64 StatRxMulticastOkCts; + SK_U64 StatRxUnicastOkCts; + SK_U64 StatRxLongFramesCts; + SK_U64 StatRxPauseMacCtrlCts; + SK_U64 StatRxMacCtrlCts; + SK_U64 StatRxPauseMacCtrlErrorCts; + SK_U64 StatRxMacCtrlUnknownCts; + SK_U64 StatRxBurstCts; + SK_U64 StatRxMissedCts; + SK_U64 StatRxFramingCts; + SK_U64 StatRxFifoOverflowCts; + SK_U64 StatRxJabberCts; + SK_U64 StatRxCarrierCts; + SK_U64 StatRxIRLengthCts; + SK_U64 StatRxSymbolCts; + SK_U64 StatRxShortsCts; + SK_U64 StatRxRuntCts; + SK_U64 StatRxCextCts; + SK_U64 StatRxTooLongCts; + SK_U64 StatRxFcsCts; + SK_U64 Dummy2; /* StatRxUtilization */ + SK_U64 StatRx64Cts; + SK_U64 StatRx127Cts; + SK_U64 StatRx255Cts; + SK_U64 StatRx511Cts; + SK_U64 StatRx1023Cts; + SK_U64 StatRxMaxCts; +} SK_PNMI_STAT; + +typedef struct s_PnmiConf { + char ConfMacCurrentAddr[6]; + char ConfMacFactoryAddr[6]; + SK_U8 ConfPMD; + SK_U8 ConfConnector; + SK_U8 ConfLinkCapability; + SK_U8 ConfLinkMode; + SK_U8 ConfLinkModeStatus; + SK_U8 ConfLinkStatus; + SK_U8 ConfFlowCtrlCapability; + SK_U8 ConfFlowCtrlMode; + SK_U8 ConfFlowCtrlStatus; + SK_U8 ConfPhyOperationCapability; + SK_U8 ConfPhyOperationMode; + SK_U8 ConfPhyOperationStatus; + SK_U8 ConfSpeedCapability; + SK_U8 ConfSpeedMode; + SK_U8 ConfSpeedStatus; +} SK_PNMI_CONF; + +typedef struct s_PnmiRlmt { + SK_U32 RlmtIndex; + SK_U32 RlmtStatus; + SK_U64 RlmtTxHelloCts; + SK_U64 RlmtRxHelloCts; + SK_U64 RlmtTxSpHelloReqCts; + SK_U64 RlmtRxSpHelloCts; +} SK_PNMI_RLMT; + +typedef struct s_PnmiRlmtMonitor { + SK_U32 RlmtMonitorIndex; + char RlmtMonitorAddr[6]; + SK_U64 RlmtMonitorErrorCts; + SK_U64 RlmtMonitorTimestamp; + SK_U8 RlmtMonitorAdmin; +} SK_PNMI_RLMT_MONITOR; + +typedef struct s_PnmiRequestStatus { + SK_U32 ErrorStatus; + SK_U32 ErrorOffset; +} SK_PNMI_REQUEST_STATUS; + +typedef struct s_PnmiStrucData { + SK_U32 MgmtDBVersion; + SK_PNMI_REQUEST_STATUS ReturnStatus; + SK_U32 VpdFreeBytes; + char VpdEntriesList[SK_PNMI_VPD_ENTRIES * SK_PNMI_VPD_KEY_SIZE]; + SK_U32 VpdEntriesNumber; + SK_PNMI_VPD Vpd[SK_PNMI_VPD_ENTRIES]; + SK_U32 PortNumber; + SK_U32 DeviceType; + char DriverDescr[SK_PNMI_STRINGLEN1]; + char DriverVersion[SK_PNMI_STRINGLEN2]; + char HwDescr[SK_PNMI_STRINGLEN1]; + char HwVersion[SK_PNMI_STRINGLEN2]; + SK_U16 Chipset; + SK_U32 MtuSize; + SK_U32 Action; + SK_U32 TestResult; + SK_U8 BusType; + SK_U8 BusSpeed; + SK_U8 BusWidth; + SK_U8 SensorNumber; + SK_PNMI_SENSOR Sensor[SK_PNMI_SENSOR_ENTRIES]; + SK_U8 ChecksumNumber; + SK_PNMI_CHECKSUM Checksum[SK_PNMI_CHECKSUM_ENTRIES]; + SK_PNMI_STAT Stat[SK_PNMI_MAC_ENTRIES]; + SK_PNMI_CONF Conf[SK_PNMI_MAC_ENTRIES]; + SK_U8 RlmtMode; + SK_U32 RlmtPortNumber; + SK_U8 RlmtPortActive; + SK_U8 RlmtPortPreferred; + SK_U64 RlmtChangeCts; + SK_U64 RlmtChangeTime; + SK_U64 RlmtChangeEstimate; + SK_U64 RlmtChangeThreshold; + SK_PNMI_RLMT Rlmt[SK_MAX_MACS]; + SK_U32 RlmtMonitorNumber; + SK_PNMI_RLMT_MONITOR RlmtMonitor[SK_PNMI_MONITOR_ENTRIES]; + SK_U32 TrapNumber; + SK_U8 Trap[SK_PNMI_TRAP_QUEUE_LEN]; + SK_U64 TxSwQueueLen; + SK_U64 TxSwQueueMax; + SK_U64 TxRetryCts; + SK_U64 RxIntrCts; + SK_U64 TxIntrCts; + SK_U64 RxNoBufCts; + SK_U64 TxNoBufCts; + SK_U64 TxUsedDescrNo; + SK_U64 RxDeliveredCts; + SK_U64 RxOctetsDeliveredCts; + SK_U64 RxHwErrorsCts; + SK_U64 TxHwErrorsCts; + SK_U64 InErrorsCts; + SK_U64 OutErrorsCts; + SK_U64 ErrRecoveryCts; + SK_U64 SysUpTime; +} SK_PNMI_STRUCT_DATA; + +#define SK_PNMI_STRUCT_SIZE (sizeof(SK_PNMI_STRUCT_DATA)) +#define SK_PNMI_MIN_STRUCT_SIZE ((unsigned int)(SK_UPTR)\ + &(((SK_PNMI_STRUCT_DATA *)0)->VpdFreeBytes)) + /* + * ReturnStatus field + * must be located + * before VpdFreeBytes + */ + +/* + * Various definitions + */ +#define SK_PNMI_MAX_PROTOS 3 + +#define SK_PNMI_CNT_NO 66 /* Must have the value of the enum + * SK_PNMI_MAX_IDX. Define SK_PNMI_CHECK + * for check while init phase 1 + */ + +/* + * Estimate data structure + */ +typedef struct s_PnmiEstimate { + unsigned int EstValueIndex; + SK_U64 EstValue[7]; + SK_U64 Estimate; + SK_TIMER EstTimer; +} SK_PNMI_ESTIMATE; + + +/* + * VCT timer data structure + */ +typedef struct s_VctTimer { + SK_TIMER VctTimer; +} SK_PNMI_VCT_TIMER; + + +/* + * PNMI specific adapter context structure + */ +typedef struct s_PnmiPort { + SK_U64 StatSyncCts; + SK_U64 StatSyncOctetsCts; + SK_U64 StatRxLongFrameCts; + SK_U64 StatRxFrameTooLongCts; + SK_U64 StatRxPMaccErr; + SK_U64 TxSwQueueLen; + SK_U64 TxSwQueueMax; + SK_U64 TxRetryCts; + SK_U64 RxIntrCts; + SK_U64 TxIntrCts; + SK_U64 RxNoBufCts; + SK_U64 TxNoBufCts; + SK_U64 TxUsedDescrNo; + SK_U64 RxDeliveredCts; + SK_U64 RxOctetsDeliveredCts; + SK_U64 RxHwErrorsCts; + SK_U64 TxHwErrorsCts; + SK_U64 InErrorsCts; + SK_U64 OutErrorsCts; + SK_U64 ErrRecoveryCts; + SK_U64 RxShortZeroMark; + SK_U64 CounterOffset[SK_PNMI_CNT_NO]; + SK_U32 CounterHigh[SK_PNMI_CNT_NO]; + SK_BOOL ActiveFlag; + SK_U8 Align[3]; +} SK_PNMI_PORT; + + +typedef struct s_PnmiData { + SK_PNMI_PORT Port [SK_MAX_MACS]; + SK_PNMI_PORT BufPort [SK_MAX_MACS]; /* 2002-09-13 pweber */ + SK_U64 VirtualCounterOffset[SK_PNMI_CNT_NO]; + SK_U32 TestResult; + char HwVersion[10]; + SK_U16 Align01; + + char *pDriverDescription; + char *pDriverVersion; + + int MacUpdatedFlag; + int RlmtUpdatedFlag; + int SirqUpdatedFlag; + + SK_U64 RlmtChangeCts; + SK_U64 RlmtChangeTime; + SK_PNMI_ESTIMATE RlmtChangeEstimate; + SK_U64 RlmtChangeThreshold; + + SK_U64 StartUpTime; + SK_U32 DeviceType; + char PciBusSpeed; + char PciBusWidth; + char Chipset; + char PMD; + char Connector; + SK_BOOL DualNetActiveFlag; + SK_U16 Align02; + + char TrapBuf[SK_PNMI_TRAP_QUEUE_LEN]; + unsigned int TrapBufFree; + unsigned int TrapQueueBeg; + unsigned int TrapQueueEnd; + unsigned int TrapBufPad; + unsigned int TrapUnique; + SK_U8 VctStatus[SK_MAX_MACS]; + SK_PNMI_VCT VctBackup[SK_MAX_MACS]; + SK_PNMI_VCT_TIMER VctTimeout[SK_MAX_MACS]; +} SK_PNMI; + + +/* + * Function prototypes + */ +extern int SkPnmiInit(SK_AC *pAc, SK_IOC IoC, int level); +extern int SkPnmiGetVar(SK_AC *pAc, SK_IOC IoC, SK_U32 Id, void* pBuf, + unsigned int* pLen, SK_U32 Instance, SK_U32 NetIndex); +extern int SkPnmiPreSetVar(SK_AC *pAc, SK_IOC IoC, SK_U32 Id, + void* pBuf, unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex); +extern int SkPnmiSetVar(SK_AC *pAc, SK_IOC IoC, SK_U32 Id, void* pBuf, + unsigned int *pLen, SK_U32 Instance, SK_U32 NetIndex); +extern int SkPnmiGetStruct(SK_AC *pAc, SK_IOC IoC, void* pBuf, + unsigned int *pLen, SK_U32 NetIndex); +extern int SkPnmiPreSetStruct(SK_AC *pAc, SK_IOC IoC, void* pBuf, + unsigned int *pLen, SK_U32 NetIndex); +extern int SkPnmiSetStruct(SK_AC *pAc, SK_IOC IoC, void* pBuf, + unsigned int *pLen, SK_U32 NetIndex); +extern int SkPnmiEvent(SK_AC *pAc, SK_IOC IoC, SK_U32 Event, + SK_EVPARA Param); + +#endif diff --git a/drivers/net/sk98lin/h/skgesirq.h b/drivers/net/sk98lin/h/skgesirq.h new file mode 100644 index 0000000000..fc001b2376 --- /dev/null +++ b/drivers/net/sk98lin/h/skgesirq.h @@ -0,0 +1,194 @@ +/****************************************************************************** + * + * Name: skgesirq.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.26 $ + * Date: $Date: 2002/10/14 09:52:36 $ + * Purpose: SK specific Gigabit Ethernet special IRQ functions + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2002 SysKonnect GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * History: + * $Log: skgesirq.h,v $ + * Revision 1.26 2002/10/14 09:52:36 rschmidt + * Added SKERR_SIRQ_E023 and SKERR_SIRQ_E023 for GPHY (Yukon) + * Editorial changes + * + * Revision 1.25 2002/07/15 18:15:52 rwahl + * Editorial changes. + * + * Revision 1.24 2002/07/15 15:39:21 rschmidt + * Corrected define for SKERR_SIRQ_E022 + * Editorial changes + * + * Revision 1.23 2002/04/25 11:09:45 rschmidt + * Removed declarations for SkXmInitPhy(), SkXmRxTxEnable() + * Editorial changes + * + * Revision 1.22 2000/11/09 11:30:10 rassmann + * WA: Waiting after releasing reset until BCom chip is accessible. + * + * Revision 1.21 2000/10/18 12:22:40 cgoos + * Added workaround for half duplex hangup. + * + * Revision 1.20 1999/12/06 10:00:44 cgoos + * Added SET event for role. + * + * Revision 1.19 1999/11/22 13:58:26 cgoos + * Changed license header to GPL. + * + * Revision 1.18 1999/05/19 07:32:59 cgoos + * Changes for 1000Base-T. + * + * Revision 1.17 1999/03/12 13:29:31 malthoff + * Move Autonegotiation Error Codes to skgeinit.h. + * + * Revision 1.16 1999/03/08 10:11:28 gklug + * add: AutoNegDone return codes + * + * Revision 1.15 1998/11/18 13:20:53 gklug + * add: different timeouts for active and non-active links + * + * Revision 1.14 1998/11/04 07:18:14 cgoos + * Added prototype for SkXmRxTxEnable. + * + * Revision 1.13 1998/10/21 05:52:23 gklug + * add: parameter DoLoop to InitPhy function + * + * Revision 1.12 1998/10/19 06:45:03 cgoos + * Added prototype for SkXmInitPhy. + * + * Revision 1.11 1998/10/15 14:34:10 gklug + * add: WA_TIME is 500 msec + * + * Revision 1.10 1998/10/14 14:49:41 malthoff + * Remove err log defines E021 and E022. They are + * defined in skgeinit.h now. + * + * Revision 1.9 1998/10/14 14:00:39 gklug + * add: error logs for init phys + * + * Revision 1.8 1998/10/14 05:44:05 gklug + * add: E020 + * + * Revision 1.7 1998/10/02 06:24:58 gklug + * add: error messages + * + * Revision 1.6 1998/10/01 07:54:45 gklug + * add: PNMI debug module + * + * Revision 1.5 1998/09/28 13:36:31 malthoff + * Move the bit definitions for Autonegotiation + * and Flow Control to skgeinit.h. + * + * Revision 1.4 1998/09/15 12:29:34 gklug + * add: error logs + * + * Revision 1.3 1998/09/03 13:54:02 gklug + * add: function prototypes + * + * Revision 1.2 1998/09/03 10:24:36 gklug + * add: Events send by PNMI + * add: parameter definition for Flow Control etc. + * + * Revision 1.1 1998/08/27 11:50:27 gklug + * initial revision + * + * + ******************************************************************************/ + +#ifndef _INC_SKGESIRQ_H_ +#define _INC_SKGESIRQ_H_ + +/* + * Define the Event the special IRQ/INI module can handle + */ +#define SK_HWEV_WATIM 1 /* Timeout for WA errata #2 XMAC */ +#define SK_HWEV_PORT_START 2 /* Port Start Event by RLMT */ +#define SK_HWEV_PORT_STOP 3 /* Port Stop Event by RLMT */ +#define SK_HWEV_CLEAR_STAT 4 /* Clear Statistics by PNMI */ +#define SK_HWEV_UPDATE_STAT 5 /* Update Statistics by PNMI */ +#define SK_HWEV_SET_LMODE 6 /* Set Link Mode by PNMI */ +#define SK_HWEV_SET_FLOWMODE 7 /* Set Flow Control Mode by PNMI */ +#define SK_HWEV_SET_ROLE 8 /* Set Master/Slave (Role) by PNMI */ +#define SK_HWEV_SET_SPEED 9 /* Set Link Speed by PNMI */ +#define SK_HWEV_HALFDUP_CHK 10 /* Half Duplex Hangup Workaround */ + +#define SK_WA_ACT_TIME (5000000L) /* 5 sec */ +#define SK_WA_INA_TIME (100000L) /* 100 msec */ + +#define SK_HALFDUP_CHK_TIME (10000L) /* 10 msec */ + +/* + * Define the error numbers and messages + */ +#define SKERR_SIRQ_E001 (SK_ERRBASE_SIRQ+0) +#define SKERR_SIRQ_E001MSG "Unknown event" +#define SKERR_SIRQ_E002 (SKERR_SIRQ_E001+1) +#define SKERR_SIRQ_E002MSG "Packet timeout RX1" +#define SKERR_SIRQ_E003 (SKERR_SIRQ_E002+1) +#define SKERR_SIRQ_E003MSG "Packet timeout RX2" +#define SKERR_SIRQ_E004 (SKERR_SIRQ_E003+1) +#define SKERR_SIRQ_E004MSG "MAC 1 not correctly initialized" +#define SKERR_SIRQ_E005 (SKERR_SIRQ_E004+1) +#define SKERR_SIRQ_E005MSG "MAC 2 not correctly initialized" +#define SKERR_SIRQ_E006 (SKERR_SIRQ_E005+1) +#define SKERR_SIRQ_E006MSG "CHECK failure R1" +#define SKERR_SIRQ_E007 (SKERR_SIRQ_E006+1) +#define SKERR_SIRQ_E007MSG "CHECK failure R2" +#define SKERR_SIRQ_E008 (SKERR_SIRQ_E007+1) +#define SKERR_SIRQ_E008MSG "CHECK failure XS1" +#define SKERR_SIRQ_E009 (SKERR_SIRQ_E008+1) +#define SKERR_SIRQ_E009MSG "CHECK failure XA1" +#define SKERR_SIRQ_E010 (SKERR_SIRQ_E009+1) +#define SKERR_SIRQ_E010MSG "CHECK failure XS2" +#define SKERR_SIRQ_E011 (SKERR_SIRQ_E010+1) +#define SKERR_SIRQ_E011MSG "CHECK failure XA2" +#define SKERR_SIRQ_E012 (SKERR_SIRQ_E011+1) +#define SKERR_SIRQ_E012MSG "unexpected IRQ Master error" +#define SKERR_SIRQ_E013 (SKERR_SIRQ_E012+1) +#define SKERR_SIRQ_E013MSG "unexpected IRQ Status error" +#define SKERR_SIRQ_E014 (SKERR_SIRQ_E013+1) +#define SKERR_SIRQ_E014MSG "Parity error on RAM (read)" +#define SKERR_SIRQ_E015 (SKERR_SIRQ_E014+1) +#define SKERR_SIRQ_E015MSG "Parity error on RAM (write)" +#define SKERR_SIRQ_E016 (SKERR_SIRQ_E015+1) +#define SKERR_SIRQ_E016MSG "Parity error MAC 1" +#define SKERR_SIRQ_E017 (SKERR_SIRQ_E016+1) +#define SKERR_SIRQ_E017MSG "Parity error MAC 2" +#define SKERR_SIRQ_E018 (SKERR_SIRQ_E017+1) +#define SKERR_SIRQ_E018MSG "Parity error RX 1" +#define SKERR_SIRQ_E019 (SKERR_SIRQ_E018+1) +#define SKERR_SIRQ_E019MSG "Parity error RX 2" +#define SKERR_SIRQ_E020 (SKERR_SIRQ_E019+1) +#define SKERR_SIRQ_E020MSG "MAC transmit FIFO underrun" +#define SKERR_SIRQ_E021 (SKERR_SIRQ_E020+1) +#define SKERR_SIRQ_E021MSG "Spurious TWSI interrupt" +#define SKERR_SIRQ_E022 (SKERR_SIRQ_E021+1) +#define SKERR_SIRQ_E022MSG "Cable pair swap error" +#define SKERR_SIRQ_E023 (SKERR_SIRQ_E022+1) +#define SKERR_SIRQ_E023MSG "Auto-negotiation error" +#define SKERR_SIRQ_E024 (SKERR_SIRQ_E023+1) +#define SKERR_SIRQ_E024MSG "FIFO overflow error" + +extern void SkGeSirqIsr(SK_AC *pAC, SK_IOC IoC, SK_U32 Istatus); +extern int SkGeSirqEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Para); +extern void SkHWLinkUp(SK_AC *pAC, SK_IOC IoC, int Port); +extern void SkHWLinkDown(SK_AC *pAC, SK_IOC IoC, int Port); + +#endif /* _INC_SKGESIRQ_H_ */ diff --git a/drivers/net/sk98lin/h/ski2c.h b/drivers/net/sk98lin/h/ski2c.h new file mode 100644 index 0000000000..5ffaf6ede1 --- /dev/null +++ b/drivers/net/sk98lin/h/ski2c.h @@ -0,0 +1,292 @@ +/****************************************************************************** + * + * Name: ski2c.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.34 $ + * Date: $Date: 2003/01/28 09:11:21 $ + * Purpose: Defines to access Voltage and Temperature Sensor + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2003 SysKonnect GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * History: + * + * $Log: ski2c.h,v $ + * Revision 1.34 2003/01/28 09:11:21 rschmidt + * Editorial changes + * + * Revision 1.33 2002/10/14 16:40:50 rschmidt + * Editorial changes (TWSI) + * + * Revision 1.32 2002/08/13 08:55:07 rschmidt + * Editorial changes + * + * Revision 1.31 2002/08/06 09:44:22 jschmalz + * Extensions and changes for Yukon + * + * Revision 1.30 2001/04/05 11:38:09 rassmann + * Set SenState to idle in SkI2cWaitIrq(). + * Changed error message in SkI2cWaitIrq(). + * + * Revision 1.29 2000/08/03 14:28:17 rassmann + * - Added function to wait for I2C being ready before resetting the board. + * - Replaced one duplicate "out of range" message with correct one. + * + * Revision 1.28 1999/11/22 13:55:46 cgoos + * Changed license header to GPL. + * + * Revision 1.27 1999/05/20 09:23:10 cgoos + * Changes for 1000Base-T (Fan sensors). + * + * Revision 1.26 1998/12/01 13:45:47 gklug + * add: InitLevel to I2c struct + * + * Revision 1.25 1998/11/03 06:55:16 gklug + * add: Dummy Reads to I2c struct + * + * Revision 1.24 1998/10/02 14:28:59 cgoos + * Added prototype for SkI2cIsr. + * + * Revision 1.23 1998/09/08 12:20:11 gklug + * add: prototypes for init and read functions + * + * Revision 1.22 1998/09/08 07:37:56 gklug + * add: log error if PCI_IO voltage sensor could not be initialized + * + * Revision 1.21 1998/09/04 08:38:05 malthoff + * Change the values for I2C_READ and I2C_WRITE + * + * Revision 1.20 1998/08/25 07:52:22 gklug + * chg: Timestamps (last) added for logging + * + * Revision 1.19 1998/08/25 06:09:00 gklug + * rmv: warning and error levels of the individual sensors. + * add: timing definitions for sending traps and logging errors + * + * Revision 1.18 1998/08/20 11:41:15 gklug + * chg: omit STRCPY macro by using char * as Sensor Description + * + * Revision 1.17 1998/08/20 11:37:43 gklug + * chg: change Ioc to IoC + * + * Revision 1.16 1998/08/20 11:30:38 gklug + * fix: SenRead declaration + * + * Revision 1.15 1998/08/20 11:27:53 gklug + * fix: Compile bugs with new awrning constants + * + * Revision 1.14 1998/08/20 08:53:12 gklug + * fix: compiler errors + * add: Threshold values + * + * Revision 1.13 1998/08/19 12:21:16 gklug + * fix: remove struct from C files (see CCC) + * add: typedefs for all structs + * + * Revision 1.12 1998/08/19 10:57:41 gklug + * add: Warning levels + * + * Revision 1.11 1998/08/18 08:37:02 malthoff + * Prototypes not required for SK_DIAG. + * + * Revision 1.10 1998/08/17 13:54:00 gklug + * fix: declaration of event function + * + * Revision 1.9 1998/08/17 06:48:39 malthoff + * Remove some unrequired macros. + * Fix the compiler errors. + * + * Revision 1.8 1998/08/14 06:47:19 gklug + * fix: Values are intergers + * + * Revision 1.7 1998/08/14 06:26:05 gklug + * add: Init error message + * + * Revision 1.6 1998/08/13 08:31:08 gklug + * add: Error message + * + * Revision 1.5 1998/08/12 14:32:04 gklug + * add: new error code/message + * + * Revision 1.4 1998/08/12 13:39:08 gklug + * chg: names of error messages + * add: defines for Sensor type and thresholds + * + * Revision 1.3 1998/08/11 07:57:16 gklug + * add: sensor struct + * add: Timeout defines + * add: I2C control struct for pAC + * + * Revision 1.2 1998/07/17 11:29:02 gklug + * rmv: Microwire and SMTPANIC + * + * Revision 1.1 1998/06/19 14:30:10 malthoff + * Created. Sources taken from ML Project. + * + * + ******************************************************************************/ + +/* + * SKI2C.H contains all I2C specific defines + */ + +#ifndef _SKI2C_H_ +#define _SKI2C_H_ + +typedef struct s_Sensor SK_SENSOR; + +#include "h/skgei2c.h" + +/* + * Define the I2C events. + */ +#define SK_I2CEV_IRQ 1 /* IRQ happened Event */ +#define SK_I2CEV_TIM 2 /* Timeout event */ +#define SK_I2CEV_CLEAR 3 /* Clear MIB Values */ + +/* + * Define READ and WRITE Constants. + */ +#undef I2C_READ /* just in case */ +#undef I2C_WRITE /* just in case */ +#define I2C_READ 0 +#define I2C_WRITE 1 +#define I2C_BURST 1 +#define I2C_SINGLE 0 + +#define SKERR_I2C_E001 (SK_ERRBASE_I2C+0) +#define SKERR_I2C_E001MSG "Sensor index unknown" +#define SKERR_I2C_E002 (SKERR_I2C_E001+1) +#define SKERR_I2C_E002MSG "TWSI: transfer does not complete" +#define SKERR_I2C_E003 (SKERR_I2C_E002+1) +#define SKERR_I2C_E003MSG "LM80: NAK on device send" +#define SKERR_I2C_E004 (SKERR_I2C_E003+1) +#define SKERR_I2C_E004MSG "LM80: NAK on register send" +#define SKERR_I2C_E005 (SKERR_I2C_E004+1) +#define SKERR_I2C_E005MSG "LM80: NAK on device (2) send" +#define SKERR_I2C_E006 (SKERR_I2C_E005+1) +#define SKERR_I2C_E006MSG "Unknown event" +#define SKERR_I2C_E007 (SKERR_I2C_E006+1) +#define SKERR_I2C_E007MSG "LM80 read out of state" +#define SKERR_I2C_E008 (SKERR_I2C_E007+1) +#define SKERR_I2C_E008MSG "Unexpected sensor read completed" +#define SKERR_I2C_E009 (SKERR_I2C_E008+1) +#define SKERR_I2C_E009MSG "WARNING: temperature sensor out of range" +#define SKERR_I2C_E010 (SKERR_I2C_E009+1) +#define SKERR_I2C_E010MSG "WARNING: voltage sensor out of range" +#define SKERR_I2C_E011 (SKERR_I2C_E010+1) +#define SKERR_I2C_E011MSG "ERROR: temperature sensor out of range" +#define SKERR_I2C_E012 (SKERR_I2C_E011+1) +#define SKERR_I2C_E012MSG "ERROR: voltage sensor out of range" +#define SKERR_I2C_E013 (SKERR_I2C_E012+1) +#define SKERR_I2C_E013MSG "ERROR: couldn't init sensor" +#define SKERR_I2C_E014 (SKERR_I2C_E013+1) +#define SKERR_I2C_E014MSG "WARNING: fan sensor out of range" +#define SKERR_I2C_E015 (SKERR_I2C_E014+1) +#define SKERR_I2C_E015MSG "ERROR: fan sensor out of range" +#define SKERR_I2C_E016 (SKERR_I2C_E015+1) +#define SKERR_I2C_E016MSG "TWSI: active transfer does not complete" + +/* + * Define Timeout values + */ +#define SK_I2C_TIM_LONG 2000000L /* 2 seconds */ +#define SK_I2C_TIM_SHORT 100000L /* 100 milliseconds */ +#define SK_I2C_TIM_WATCH 1000000L /* 1 second */ + +/* + * Define trap and error log hold times + */ +#ifndef SK_SEN_ERR_TR_HOLD +#define SK_SEN_ERR_TR_HOLD (4*SK_TICKS_PER_SEC) +#endif +#ifndef SK_SEN_ERR_LOG_HOLD +#define SK_SEN_ERR_LOG_HOLD (60*SK_TICKS_PER_SEC) +#endif +#ifndef SK_SEN_WARN_TR_HOLD +#define SK_SEN_WARN_TR_HOLD (15*SK_TICKS_PER_SEC) +#endif +#ifndef SK_SEN_WARN_LOG_HOLD +#define SK_SEN_WARN_LOG_HOLD (15*60*SK_TICKS_PER_SEC) +#endif + +/* + * Defines for SenType + */ +#define SK_SEN_UNKNOWN 0 +#define SK_SEN_TEMP 1 +#define SK_SEN_VOLT 2 +#define SK_SEN_FAN 3 + +/* + * Define for the SenErrorFlag + */ +#define SK_SEN_ERR_NOT_PRESENT 0 /* Error Flag: Sensor not present */ +#define SK_SEN_ERR_OK 1 /* Error Flag: O.K. */ +#define SK_SEN_ERR_WARN 2 /* Error Flag: Warning */ +#define SK_SEN_ERR_ERR 3 /* Error Flag: Error */ +#define SK_SEN_ERR_FAULTY 4 /* Error Flag: Faulty */ + +/* + * Define the Sensor struct + */ +struct s_Sensor { + char *SenDesc; /* Description */ + int SenType; /* Voltage or Temperature */ + SK_I32 SenValue; /* Current value of the sensor */ + SK_I32 SenThreErrHigh; /* High error Threshhold of this sensor */ + SK_I32 SenThreWarnHigh; /* High warning Threshhold of this sensor */ + SK_I32 SenThreErrLow; /* Lower error Threshold of the sensor */ + SK_I32 SenThreWarnLow; /* Lower warning Threshold of the sensor */ + int SenErrFlag; /* Sensor indicated an error */ + SK_BOOL SenInit; /* Is sensor initialized ? */ + SK_U64 SenErrCts; /* Error trap counter */ + SK_U64 SenWarnCts; /* Warning trap counter */ + SK_U64 SenBegErrTS; /* Begin error timestamp */ + SK_U64 SenBegWarnTS; /* Begin warning timestamp */ + SK_U64 SenLastErrTrapTS; /* Last error trap timestamp */ + SK_U64 SenLastErrLogTS; /* Last error log timestamp */ + SK_U64 SenLastWarnTrapTS; /* Last warning trap timestamp */ + SK_U64 SenLastWarnLogTS; /* Last warning log timestamp */ + int SenState; /* Sensor State (see HW specific include) */ + int (*SenRead)(SK_AC *pAC, SK_IOC IoC, struct s_Sensor *pSen); + /* Sensors read function */ + SK_U16 SenReg; /* Register Address for this sensor */ + SK_U8 SenDev; /* Device Selection for this sensor */ +}; + +typedef struct s_I2c { + SK_SENSOR SenTable[SK_MAX_SENSORS]; /* Sensor Table */ + int CurrSens; /* Which sensor is currently queried */ + int MaxSens; /* Max. number of sensors */ + int TimerMode; /* Use the timer also to watch the state machine */ + int InitLevel; /* Initialized Level */ +#ifndef SK_DIAG + int DummyReads; /* Number of non-checked dummy reads */ + SK_TIMER SenTimer; /* Sensors timer */ +#endif /* !SK_DIAG */ +} SK_I2C; + +extern int SkI2cReadSensor(SK_AC *pAC, SK_IOC IoC, SK_SENSOR *pSen); +#ifndef SK_DIAG +extern int SkI2cEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Para); +extern int SkI2cInit(SK_AC *pAC, SK_IOC IoC, int Level); +extern void SkI2cWaitIrq(SK_AC *pAC, SK_IOC IoC); +extern void SkI2cIsr(SK_AC *pAC, SK_IOC IoC); + +#endif +#endif /* n_SKI2C_H */ diff --git a/drivers/net/sk98lin/h/skqueue.h b/drivers/net/sk98lin/h/skqueue.h new file mode 100644 index 0000000000..bce20a75b6 --- /dev/null +++ b/drivers/net/sk98lin/h/skqueue.h @@ -0,0 +1,147 @@ +/****************************************************************************** + * + * Name: skqueue.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.14 $ + * Date: $Date: 2002/03/15 10:52:13 $ + * Purpose: Defines for the Event queue + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998,1999 SysKonnect, + * a business unit of Schneider & Koch & Co. Datensysteme GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * History: + * + * $Log: skqueue.h,v $ + * Revision 1.14 2002/03/15 10:52:13 mkunz + * Added event classes for link aggregation + * + * Revision 1.13 1999/11/22 13:59:05 cgoos + * Changed license header to GPL. + * + * Revision 1.12 1998/09/08 08:48:01 gklug + * add: init level handling + * + * Revision 1.11 1998/09/03 14:15:11 gklug + * add: CSUM and HWAC Eventclass and function. + * fix: pParaPtr according to CCC + * + * Revision 1.10 1998/08/20 12:43:03 gklug + * add: typedef SK_QUEUE + * + * Revision 1.9 1998/08/19 09:50:59 gklug + * fix: remove struct keyword from c-code (see CCC) add typedefs + * + * Revision 1.8 1998/08/18 07:00:01 gklug + * fix: SK_PTR not defined use void * instead. + * + * Revision 1.7 1998/08/17 13:43:19 gklug + * chg: Parameter will be union of 64bit para, 2 times SK_U32 or SK_PTR + * + * Revision 1.6 1998/08/14 07:09:30 gklug + * fix: chg pAc -> pAC + * + * Revision 1.5 1998/08/11 14:26:44 gklug + * chg: Event Dispatcher returns now int. + * + * Revision 1.4 1998/08/11 12:15:21 gklug + * add: Error numbers of skqueue module + * + * Revision 1.3 1998/08/07 12:54:23 gklug + * fix: first compiled version + * + * Revision 1.2 1998/08/07 09:34:00 gklug + * adapt structure defs to CCC + * add: prototypes for functions + * + * Revision 1.1 1998/07/30 14:52:12 gklug + * Initial version. + * Defines Event Classes, Event structs and queue management variables. + * + * + * + ******************************************************************************/ + +/* + * SKQUEUE.H contains all defines and types for the event queue + */ + +#ifndef _SKQUEUE_H_ +#define _SKQUEUE_H_ + + +/* + * define the event classes to be served + */ +#define SKGE_DRV 1 /* Driver Event Class */ +#define SKGE_RLMT 2 /* RLMT Event Class */ +#define SKGE_I2C 3 /* i2C Event Class */ +#define SKGE_PNMI 4 /* PNMI Event Class */ +#define SKGE_CSUM 5 /* Checksum Event Class */ +#define SKGE_HWAC 6 /* Hardware Access Event Class */ + +#define SKGE_SWT 9 /* Software Timer Event Class */ +#define SKGE_LACP 10 /* LACP Aggregation Event Class */ +#define SKGE_RSF 11 /* RSF Aggregation Event Class */ +#define SKGE_MARKER 12 /* MARKER Aggregation Event Class */ +#define SKGE_FD 13 /* FD Distributor Event Class */ + +/* + * define event queue as circular buffer + */ +#define SK_MAX_EVENT 64 + +/* + * Parameter union for the Para stuff + */ +typedef union u_EvPara { + void *pParaPtr; /* Parameter Pointer */ + SK_U64 Para64; /* Parameter 64bit version */ + SK_U32 Para32[2]; /* Parameter Array of 32bit parameters */ +} SK_EVPARA; + +/* + * Event Queue + * skqueue.c + * events are class/value pairs + * class is addressee, e.g. RMT, PCM etc. + * value is command, e.g. line state change, ring op change etc. + */ +typedef struct s_EventElem { + SK_U32 Class ; /* Event class */ + SK_U32 Event ; /* Event value */ + SK_EVPARA Para ; /* Event parameter */ +} SK_EVENTELEM; + +typedef struct s_Queue { + SK_EVENTELEM EvQueue[SK_MAX_EVENT]; + SK_EVENTELEM *EvPut ; + SK_EVENTELEM *EvGet ; +} SK_QUEUE; + +extern void SkEventInit(SK_AC *pAC, SK_IOC Ioc, int Level); +extern void SkEventQueue(SK_AC *pAC, SK_U32 Class, SK_U32 Event, + SK_EVPARA Para); +extern int SkEventDispatcher(SK_AC *pAC,SK_IOC Ioc); + + +/* Define Error Numbers and messages */ +#define SKERR_Q_E001 (SK_ERRBASE_QUEUE+0) +#define SKERR_Q_E001MSG "Event queue overflow" +#define SKERR_Q_E002 (SKERR_Q_E001+1) +#define SKERR_Q_E002MSG "Undefined event class" +#endif /* _SKQUEUE_H_ */ diff --git a/drivers/net/sk98lin/h/skrlmt.h b/drivers/net/sk98lin/h/skrlmt.h new file mode 100644 index 0000000000..04d025b009 --- /dev/null +++ b/drivers/net/sk98lin/h/skrlmt.h @@ -0,0 +1,563 @@ +/****************************************************************************** + * + * Name: skrlmt.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.35 $ + * Date: $Date: 2003/01/31 14:12:41 $ + * Purpose: Header file for Redundant Link ManagemenT. + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2001 SysKonnect GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * History: + * + * $Log: skrlmt.h,v $ + * Revision 1.35 2003/01/31 14:12:41 mkunz + * single port adapter runs now with two identical MAC addresses + * + * Revision 1.34 2002/09/23 15:13:41 rwahl + * Editorial changes. + * + * Revision 1.33 2001/07/03 12:16:48 mkunz + * New Flag ChgBcPrio (Change priority of last broadcast received) + * + * Revision 1.32 2001/02/14 14:06:31 rassmann + * Editorial changes. + * + * Revision 1.31 2001/02/05 14:25:26 rassmann + * Prepared RLMT for transparent operation. + * + * Revision 1.30 2001/01/22 13:41:39 rassmann + * Supporting two nets on dual-port adapters. + * + * Revision 1.29 2000/11/17 08:58:00 rassmann + * Moved CheckSwitch from SK_RLMT_PACKET_RECEIVED to SK_RLMT_TIM event. + * + * Revision 1.28 2000/11/09 12:24:34 rassmann + * Editorial changes. + * + * Revision 1.27 1999/11/22 13:59:56 cgoos + * Changed license header to GPL. + * + * Revision 1.26 1999/10/04 14:01:19 rassmann + * Corrected reaction to reception of BPDU frames (#10441). + * + * Revision 1.25 1999/07/20 12:53:39 rassmann + * Fixed documentation errors for lookahead macros. + * + * Revision 1.24 1999/05/28 11:15:56 rassmann + * Changed behaviour to reflect Design Spec v1.2. + * Controlling Link LED(s). + * Introduced RLMT Packet Version field in RLMT Packet. + * Newstyle lookahead macros (checking meta-information before looking at + * the packet). + * + * Revision 1.23 1999/01/28 12:50:42 rassmann + * Not using broadcast time stamps in CheckLinkState mode. + * + * Revision 1.22 1999/01/27 14:13:04 rassmann + * Monitoring broadcast traffic. + * Switching more reliably and not too early if switch is + * configured for spanning tree. + * + * Revision 1.21 1998/12/08 13:11:25 rassmann + * Stopping SegTimer at RlmtStop. + * + * Revision 1.20 1998/11/24 12:37:33 rassmann + * Implemented segmentation check. + * + * Revision 1.19 1998/11/17 13:43:06 rassmann + * Handling (logical) tx failure. + * Sending packet on logical address after PORT_SWITCH. + * + * Revision 1.18 1998/11/13 16:56:56 rassmann + * Added macro version of SkRlmtLookaheadPacket. + * + * Revision 1.17 1998/11/06 18:06:05 rassmann + * Corrected timing when RLMT checks fail. + * Clearing tx counter earlier in periodical checks. + * + * Revision 1.16 1998/11/03 13:53:50 rassmann + * RLMT should switch now (at least in mode 3). + * + * Revision 1.15 1998/10/22 11:39:52 rassmann + * Corrected signed/unsigned mismatches. + * Corrected receive list handling and address recognition. + * + * Revision 1.14 1998/10/15 15:16:36 rassmann + * Finished Spanning Tree checking. + * Checked with lint. + * + * Revision 1.13 1998/09/24 19:16:08 rassmann + * Code cleanup. + * Introduced Timer for PORT_DOWN due to no RX. + * + * Revision 1.12 1998/09/16 11:09:52 rassmann + * Syntax corrections. + * + * Revision 1.11 1998/09/15 11:28:50 rassmann + * Syntax corrections. + * + * Revision 1.10 1998/09/14 17:07:38 rassmann + * Added code for port checking via LAN. + * Changed Mbuf definition. + * + * Revision 1.9 1998/09/07 11:14:15 rassmann + * Syntax corrections. + * + * Revision 1.8 1998/09/07 09:06:08 rassmann + * Syntax corrections. + * + * Revision 1.7 1998/09/04 19:41:34 rassmann + * Syntax corrections. + * Started entering code for checking local links. + * + * Revision 1.6 1998/09/04 12:14:28 rassmann + * Interface cleanup. + * + * Revision 1.5 1998/09/02 16:55:29 rassmann + * Updated to reflect new DRV/HWAC/RLMT interface. + * + * Revision 1.4 1998/09/02 07:26:02 afischer + * typedef for SK_RLMT_PORT + * + * Revision 1.3 1998/08/27 14:29:03 rassmann + * Code cleanup. + * + * Revision 1.2 1998/08/27 14:26:25 rassmann + * Updated interface. + * + * Revision 1.1 1998/08/21 08:29:10 rassmann + * First public version. + * + ******************************************************************************/ + +/****************************************************************************** + * + * Description: + * + * This is the header file for Redundant Link ManagemenT. + * + * Include File Hierarchy: + * + * "skdrv1st.h" + * ... + * "sktypes.h" + * "skqueue.h" + * "skaddr.h" + * "skrlmt.h" + * ... + * "skdrv2nd.h" + * + ******************************************************************************/ + +#ifndef __INC_SKRLMT_H +#define __INC_SKRLMT_H + +#ifdef __cplusplus +#error C++ is not yet supported. +extern "C" { +#endif /* cplusplus */ + +/* defines ********************************************************************/ + +#define SK_RLMT_NET_DOWN_TEMP 1 /* NET_DOWN due to last port down. */ +#define SK_RLMT_NET_DOWN_FINAL 2 /* NET_DOWN due to RLMT_STOP. */ + +/* ----- Default queue sizes - must be multiples of 8 KB ----- */ + +/* Less than 8 KB free in RX queue => pause frames. */ +#define SK_RLMT_STANDBY_QRXSIZE 128 /* Size of rx standby queue in KB. */ +#define SK_RLMT_STANDBY_QXASIZE 32 /* Size of async standby queue in KB. */ +#define SK_RLMT_STANDBY_QXSSIZE 0 /* Size of sync standby queue in KB. */ + +#define SK_RLMT_MAX_TX_BUF_SIZE 60 /* Maximum RLMT transmit size. */ + +/* ----- PORT states ----- */ + +#define SK_RLMT_PS_INIT 0 /* Port state: Init. */ +#define SK_RLMT_PS_LINK_DOWN 1 /* Port state: Link down. */ +#define SK_RLMT_PS_DOWN 2 /* Port state: Port down. */ +#define SK_RLMT_PS_GOING_UP 3 /* Port state: Going up. */ +#define SK_RLMT_PS_UP 4 /* Port state: Up. */ + +/* ----- RLMT states ----- */ + +#define SK_RLMT_RS_INIT 0 /* RLMT state: Init. */ +#define SK_RLMT_RS_NET_DOWN 1 /* RLMT state: Net down. */ +#define SK_RLMT_RS_NET_UP 2 /* RLMT state: Net up. */ + +/* ----- PORT events ----- */ + +#define SK_RLMT_LINK_UP 1001 /* Link came up. */ +#define SK_RLMT_LINK_DOWN 1002 /* Link went down. */ +#define SK_RLMT_PORT_ADDR 1003 /* Port address changed. */ + +/* ----- RLMT events ----- */ + +#define SK_RLMT_START 2001 /* Start RLMT. */ +#define SK_RLMT_STOP 2002 /* Stop RLMT. */ +#define SK_RLMT_PACKET_RECEIVED 2003 /* Packet was received for RLMT. */ +#define SK_RLMT_STATS_CLEAR 2004 /* Clear statistics. */ +#define SK_RLMT_STATS_UPDATE 2005 /* Update statistics. */ +#define SK_RLMT_PREFPORT_CHANGE 2006 /* Change preferred port. */ +#define SK_RLMT_MODE_CHANGE 2007 /* New RlmtMode. */ +#define SK_RLMT_SET_NETS 2008 /* Number of Nets (1 or 2). */ + +/* ----- RLMT mode bits ----- */ + +/* + * CAUTION: These defines are private to RLMT. + * Please use the RLMT mode defines below. + */ + +#define SK_RLMT_CHECK_LINK 1 /* Check Link. */ +#define SK_RLMT_CHECK_LOC_LINK 2 /* Check other link on same adapter. */ +#define SK_RLMT_CHECK_SEG 4 /* Check segmentation. */ + +#ifndef RLMT_CHECK_REMOTE +#define SK_RLMT_CHECK_OTHERS SK_RLMT_CHECK_LOC_LINK +#else /* RLMT_CHECK_REMOTE */ +#define SK_RLMT_CHECK_REM_LINK 8 /* Check link(s) on other adapter(s). */ +#define SK_RLMT_MAX_REMOTE_PORTS_CHECKED 3 +#define SK_RLMT_CHECK_OTHERS \ + (SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_REM_LINK) +#endif /* RLMT_CHECK_REMOTE */ + +#ifndef SK_RLMT_ENABLE_TRANSPARENT +#define SK_RLMT_TRANSPARENT 0 /* RLMT transparent - inactive. */ +#else /* SK_RLMT_ENABLE_TRANSPARENT */ +#define SK_RLMT_TRANSPARENT 128 /* RLMT transparent. */ +#endif /* SK_RLMT_ENABLE_TRANSPARENT */ + +/* ----- RLMT modes ----- */ + +/* Check Link State. */ +#define SK_RLMT_MODE_CLS (SK_RLMT_CHECK_LINK) + +/* Check Local Ports: check other links on the same adapter. */ +#define SK_RLMT_MODE_CLP (SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK) + +/* Check Local Ports and Segmentation Status. */ +#define SK_RLMT_MODE_CLPSS \ + (SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_SEG) + +#ifdef RLMT_CHECK_REMOTE +/* Check Local and Remote Ports: check links (local or remote). */ + Name of define TBD! +#define SK_RLMT_MODE_CRP \ + (SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | SK_RLMT_CHECK_REM_LINK) + +/* Check Local and Remote Ports and Segmentation Status. */ + Name of define TBD! +#define SK_RLMT_MODE_CRPSS \ + (SK_RLMT_CHECK_LINK | SK_RLMT_CHECK_LOC_LINK | \ + SK_RLMT_CHECK_REM_LINK | SK_RLMT_CHECK_SEG) +#endif /* RLMT_CHECK_REMOTE */ + +/* ----- RLMT lookahead result bits ----- */ + +#define SK_RLMT_RX_RLMT 1 /* Give packet to RLMT. */ +#define SK_RLMT_RX_PROTOCOL 2 /* Give packet to protocol. */ + +/* Macros */ + +#if 0 +SK_AC *pAC /* adapter context */ +SK_U32 PortNum /* receiving port */ +unsigned PktLen /* received packet's length */ +SK_BOOL IsBc /* Flag: packet is broadcast */ +unsigned *pOffset /* offs. of bytes to present to SK_RLMT_LOOKAHEAD */ +unsigned *pNumBytes /* #Bytes to present to SK_RLMT_LOOKAHEAD */ +#endif /* 0 */ + +#define SK_RLMT_PRE_LOOKAHEAD(pAC,PortNum,PktLen,IsBc,pOffset,pNumBytes) { \ + SK_AC *_pAC; \ + SK_U32 _PortNum; \ + _pAC = (pAC); \ + _PortNum = (SK_U32)(PortNum); \ + /* _pAC->Rlmt.Port[_PortNum].PacketsRx++; */ \ + _pAC->Rlmt.Port[_PortNum].PacketsPerTimeSlot++; \ + if (_pAC->Rlmt.RlmtOff) { \ + *(pNumBytes) = 0; \ + } \ + else {\ + if ((_pAC->Rlmt.Port[_PortNum].Net->RlmtMode & SK_RLMT_TRANSPARENT) != 0) { \ + *(pNumBytes) = 0; \ + } \ + else if (IsBc) { \ + if (_pAC->Rlmt.Port[_PortNum].Net->RlmtMode != SK_RLMT_MODE_CLS) { \ + *(pNumBytes) = 6; \ + *(pOffset) = 6; \ + } \ + else { \ + *(pNumBytes) = 0; \ + } \ + } \ + else { \ + if ((PktLen) > SK_RLMT_MAX_TX_BUF_SIZE) { \ + /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \ + *(pNumBytes) = 0; \ + } \ + else { \ + *(pNumBytes) = 6; \ + *(pOffset) = 0; \ + } \ + } \ + } \ +} + +#if 0 +SK_AC *pAC /* adapter context */ +SK_U32 PortNum /* receiving port */ +SK_U8 *pLaPacket, /* received packet's data (points to pOffset) */ +SK_BOOL IsBc /* Flag: packet is broadcast */ +SK_BOOL IsMc /* Flag: packet is multicast */ +unsigned *pForRlmt /* Result: bits SK_RLMT_RX_RLMT, SK_RLMT_RX_PROTOCOL */ +SK_RLMT_LOOKAHEAD() expects *pNumBytes from +packet offset *pOffset (s.a.) at *pLaPacket. + +If you use SK_RLMT_LOOKAHEAD in a path where you already know if the packet is +BC, MC, or UC, you should use constants for IsBc and IsMc, so that your compiler +can trash unneeded parts of the if construction. +#endif /* 0 */ + +#define SK_RLMT_LOOKAHEAD(pAC,PortNum,pLaPacket,IsBc,IsMc,pForRlmt) { \ + SK_AC *_pAC; \ + SK_U32 _PortNum; \ + SK_U8 *_pLaPacket; \ + _pAC = (pAC); \ + _PortNum = (SK_U32)(PortNum); \ + _pLaPacket = (SK_U8 *)(pLaPacket); \ + if (IsBc) {\ + if (!SK_ADDR_EQUAL(_pLaPacket, _pAC->Addr.Net[_pAC->Rlmt.Port[ \ + _PortNum].Net->NetNumber].CurrentMacAddress.a)) { \ + _pAC->Rlmt.Port[_PortNum].BcTimeStamp = SkOsGetTime(_pAC); \ + _pAC->Rlmt.CheckSwitch = SK_TRUE; \ + } \ + /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \ + *(pForRlmt) = SK_RLMT_RX_PROTOCOL; \ + } \ + else if (IsMc) { \ + if (SK_ADDR_EQUAL(_pLaPacket, BridgeMcAddr.a)) { \ + _pAC->Rlmt.Port[_PortNum].BpduPacketsPerTimeSlot++; \ + if (_pAC->Rlmt.Port[_PortNum].Net->RlmtMode & SK_RLMT_CHECK_SEG) { \ + *(pForRlmt) = SK_RLMT_RX_RLMT | SK_RLMT_RX_PROTOCOL; \ + } \ + else { \ + *(pForRlmt) = SK_RLMT_RX_PROTOCOL; \ + } \ + } \ + else if (SK_ADDR_EQUAL(_pLaPacket, SkRlmtMcAddr.a)) { \ + *(pForRlmt) = SK_RLMT_RX_RLMT; \ + } \ + else { \ + /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \ + *(pForRlmt) = SK_RLMT_RX_PROTOCOL; \ + } \ + } \ + else { \ + if (SK_ADDR_EQUAL( \ + _pLaPacket, \ + _pAC->Addr.Port[_PortNum].CurrentMacAddress.a)) { \ + *(pForRlmt) = SK_RLMT_RX_RLMT; \ + } \ + else { \ + /* _pAC->Rlmt.Port[_PortNum].DataPacketsPerTimeSlot++; */ \ + *(pForRlmt) = SK_RLMT_RX_PROTOCOL; \ + } \ + } \ +} + +#ifdef SK_RLMT_FAST_LOOKAHEAD +Error: SK_RLMT_FAST_LOOKAHEAD no longer used. Use new macros for lookahead. +#endif /* SK_RLMT_FAST_LOOKAHEAD */ +#ifdef SK_RLMT_SLOW_LOOKAHEAD +Error: SK_RLMT_SLOW_LOOKAHEAD no longer used. Use new macros for lookahead. +#endif /* SK_RLMT_SLOW_LOOKAHEAD */ + +/* typedefs *******************************************************************/ + +#ifdef SK_RLMT_MBUF_PRIVATE +typedef struct s_RlmtMbuf { + some content +} SK_RLMT_MBUF; +#endif /* SK_RLMT_MBUF_PRIVATE */ + + +#ifdef SK_LA_INFO +typedef struct s_Rlmt_PacketInfo { + unsigned PacketLength; /* Length of packet. */ + unsigned PacketType; /* Directed/Multicast/Broadcast. */ +} SK_RLMT_PINFO; +#endif /* SK_LA_INFO */ + + +typedef struct s_RootId { + SK_U8 Id[8]; /* Root Bridge Id. */ +} SK_RLMT_ROOT_ID; + + +typedef struct s_port { + SK_MAC_ADDR CheckAddr; + SK_BOOL SuspectTx; +} SK_PORT_CHECK; + + +typedef struct s_RlmtNet SK_RLMT_NET; + + +typedef struct s_RlmtPort { + +/* ----- Public part (read-only) ----- */ + + SK_U8 PortState; /* Current state of this port. */ + + /* For PNMI */ + SK_BOOL LinkDown; + SK_BOOL PortDown; + SK_U8 Align01; + + SK_U32 PortNumber; /* Number of port on adapter. */ + SK_RLMT_NET * Net; /* Net port belongs to. */ + + SK_U64 TxHelloCts; + SK_U64 RxHelloCts; + SK_U64 TxSpHelloReqCts; + SK_U64 RxSpHelloCts; + +/* ----- Private part ----- */ + +/* SK_U64 PacketsRx; */ /* Total packets received. */ + SK_U32 PacketsPerTimeSlot; /* Packets rxed between TOs. */ +/* SK_U32 DataPacketsPerTimeSlot; */ /* Data packets ... */ + SK_U32 BpduPacketsPerTimeSlot; /* BPDU packets rxed in TS. */ + SK_U64 BcTimeStamp; /* Time of last BC receive. */ + SK_U64 GuTimeStamp; /* Time of entering GOING_UP. */ + + SK_TIMER UpTimer; /* Timer struct Link/Port up. */ + SK_TIMER DownRxTimer; /* Timer struct down rx. */ + SK_TIMER DownTxTimer; /* Timer struct down tx. */ + + SK_U32 CheckingState; /* Checking State. */ + + SK_ADDR_PORT * AddrPort; + + SK_U8 Random[4]; /* Random value. */ + unsigned PortsChecked; /* #ports checked. */ + unsigned PortsSuspect; /* #ports checked that are s. */ + SK_PORT_CHECK PortCheck[1]; +/* SK_PORT_CHECK PortCheck[SK_MAX_MACS - 1]; */ + + SK_BOOL PortStarted; /* Port is started. */ + SK_BOOL PortNoRx; /* NoRx for >= 1 time slot. */ + SK_BOOL RootIdSet; + SK_RLMT_ROOT_ID Root; /* Root Bridge Id. */ +} SK_RLMT_PORT; + + +struct s_RlmtNet { + +/* ----- Public part (read-only) ----- */ + + SK_U32 NetNumber; /* Number of net. */ + + SK_RLMT_PORT * Port[SK_MAX_MACS]; /* Ports that belong to this net. */ + SK_U32 NumPorts; /* Number of ports. */ + SK_U32 PrefPort; /* Preferred port. */ + + /* For PNMI */ + + SK_U32 ChgBcPrio; /* Change Priority of last broadcast received */ + SK_U32 RlmtMode; /* Check ... */ + SK_U32 ActivePort; /* Active port. */ + SK_U32 Preference; /* 0xFFFFFFFF: Automatic. */ + + SK_U8 RlmtState; /* Current RLMT state. */ + +/* ----- Private part ----- */ + SK_BOOL RootIdSet; + SK_U16 Align01; + + int LinksUp; /* #Links up. */ + int PortsUp; /* #Ports up. */ + SK_U32 TimeoutValue; /* RLMT timeout value. */ + + SK_U32 CheckingState; /* Checking State. */ + SK_RLMT_ROOT_ID Root; /* Root Bridge Id. */ + + SK_TIMER LocTimer; /* Timer struct. */ + SK_TIMER SegTimer; /* Timer struct. */ +}; + + +typedef struct s_Rlmt { + +/* ----- Public part (read-only) ----- */ + + SK_U32 NumNets; /* Number of nets. */ + SK_U32 NetsStarted; /* Number of nets started. */ + SK_RLMT_NET Net[SK_MAX_NETS]; /* Array of available nets. */ + SK_RLMT_PORT Port[SK_MAX_MACS]; /* Array of available ports. */ + +/* ----- Private part ----- */ + SK_BOOL CheckSwitch; + SK_BOOL RlmtOff; /* set to zero if the Mac addresses + are equal or the second one + is zero */ + SK_U16 Align01; + +} SK_RLMT; + + +extern SK_MAC_ADDR BridgeMcAddr; +extern SK_MAC_ADDR SkRlmtMcAddr; + +/* function prototypes ********************************************************/ + + +#ifndef SK_KR_PROTO + +/* Functions provided by SkRlmt */ + +/* ANSI/C++ compliant function prototypes */ + +extern void SkRlmtInit( + SK_AC *pAC, + SK_IOC IoC, + int Level); + +extern int SkRlmtEvent( + SK_AC *pAC, + SK_IOC IoC, + SK_U32 Event, + SK_EVPARA Para); + +#else /* defined(SK_KR_PROTO) */ + +/* Non-ANSI/C++ compliant function prototypes */ + +#error KR-style function prototypes are not yet provided. + +#endif /* defined(SK_KR_PROTO)) */ + + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __INC_SKRLMT_H */ diff --git a/drivers/net/sk98lin/h/sktimer.h b/drivers/net/sk98lin/h/sktimer.h new file mode 100644 index 0000000000..36f8ccb6af --- /dev/null +++ b/drivers/net/sk98lin/h/sktimer.h @@ -0,0 +1,99 @@ +/****************************************************************************** + * + * Name: sktimer.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.9 $ + * Date: $Date: 1999/11/22 14:00:29 $ + * Purpose: Defines for the timer functions + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998,1999 SysKonnect, + * a business unit of Schneider & Koch & Co. Datensysteme GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * History: + * + * $Log: sktimer.h,v $ + * Revision 1.9 1999/11/22 14:00:29 cgoos + * Changed license header to GPL. + * + * Revision 1.8 1998/09/08 08:48:02 gklug + * add: init level handling + * + * Revision 1.7 1998/08/20 12:31:29 gklug + * fix: SK_TIMCTRL needs to be defined + * + * Revision 1.6 1998/08/19 09:51:00 gklug + * fix: remove struct keyword from c-code (see CCC) add typedefs + * + * Revision 1.5 1998/08/17 13:43:21 gklug + * chg: Parameter will be union of 64bit para, 2 times SK_U32 or SK_PTR + * + * Revision 1.4 1998/08/14 07:09:31 gklug + * fix: chg pAc -> pAC + * + * Revision 1.3 1998/08/07 12:54:24 gklug + * fix: first compiled version + * + * Revision 1.2 1998/08/07 09:35:29 gklug + * add: Timer control struct for Adapters context + * add: function prototypes + * + * Revision 1.1 1998/08/05 11:27:01 gklug + * First version: adapted from SMT + * + * + ******************************************************************************/ + +/* + * SKTIMER.H contains all defines and types for the timer functions + */ + +#ifndef _SKTIMER_H_ +#define _SKTIMER_H_ + +#include "h/skqueue.h" + +/* + * SK timer + * - needed wherever a timer is used. Put this in your data structure + * wherever you want. + */ +typedef struct s_Timer SK_TIMER; + +struct s_Timer { + SK_TIMER *TmNext ; /* linked list */ + SK_U32 TmClass ; /* Timer Event class */ + SK_U32 TmEvent ; /* Timer Event value */ + SK_EVPARA TmPara ; /* Timer Event parameter */ + SK_U32 TmDelta ; /* delta time */ + int TmActive ; /* flag : active/inactive */ +} ; + +/* + * Timer control struct. + * - use in Adapters context name pAC->Tim + */ +typedef struct s_TimCtrl { + SK_TIMER *StQueue ; /* Head of Timer queue */ +} SK_TIMCTRL ; + +extern void SkTimerInit(SK_AC *pAC,SK_IOC Ioc, int Level); +extern void SkTimerStop(SK_AC *pAC,SK_IOC Ioc,SK_TIMER *pTimer); +extern void SkTimerStart(SK_AC *pAC,SK_IOC Ioc,SK_TIMER *pTimer, + SK_U32 Time,SK_U32 Class,SK_U32 Event,SK_EVPARA Para); +extern void SkTimerDone(SK_AC *pAC,SK_IOC Ioc); +#endif /* _SKTIMER_H_ */ diff --git a/drivers/net/sk98lin/h/sktypes.h b/drivers/net/sk98lin/h/sktypes.h new file mode 100644 index 0000000000..e657016e5b --- /dev/null +++ b/drivers/net/sk98lin/h/sktypes.h @@ -0,0 +1,87 @@ +/****************************************************************************** + * + * Name: sktypes.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.3 $ + * Date: $Date: 2003/02/25 14:16:40 $ + * Purpose: Define data types for Linux + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2003 SysKonnect GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + + /***************************************************************************** + * + * History: + * + * $Log: sktypes.h,v $ + * Revision 1.3 2003/02/25 14:16:40 mlindner + * Fix: Copyright statement + * + * Revision 1.2 1999/11/22 14:01:58 cgoos + * Changed license header to GPL. + * Now using Linux' fixed size types instead of standard types. + * + * Revision 1.1 1999/02/16 07:41:40 cgoos + * First version. + * + * + * + *****************************************************************************/ + +/****************************************************************************** + * + * Description: + * + * In this file, all data types that are needed by the common modules + * are mapped to Linux data types. + * + * + * Include File Hierarchy: + * + * + ******************************************************************************/ + +#ifndef __INC_SKTYPES_H +#define __INC_SKTYPES_H + + +/* defines *******************************************************************/ + +/* + * Data types with a specific size. 'I' = signed, 'U' = unsigned. + */ +#define SK_I8 s8 +#define SK_U8 u8 +#define SK_I16 s16 +#define SK_U16 u16 +#define SK_I32 s32 +#define SK_U32 u32 +#define SK_I64 s64 +#define SK_U64 u64 + +#define SK_UPTR ulong /* casting pointer <-> integral */ + +/* +* Boolean type. +*/ +#define SK_BOOL SK_U8 +#define SK_FALSE 0 +#define SK_TRUE (!SK_FALSE) + +/* typedefs *******************************************************************/ + +/* function prototypes ********************************************************/ + +#endif /* __INC_SKTYPES_H */ diff --git a/drivers/net/sk98lin/h/skversion.h b/drivers/net/sk98lin/h/skversion.h new file mode 100644 index 0000000000..ef466857d1 --- /dev/null +++ b/drivers/net/sk98lin/h/skversion.h @@ -0,0 +1,52 @@ +/****************************************************************************** + * + * Name: version.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.4 $ + * Date: $Date: 2003/02/25 14:16:40 $ + * Purpose: SK specific Error log support + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2003 SysKonnect GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * History: + * $Log: skversion.h,v $ + * Revision 1.4 2003/02/25 14:16:40 mlindner + * Fix: Copyright statement + * + * Revision 1.3 2003/02/25 13:30:18 mlindner + * Add: Support for various vendors + * + * Revision 1.1.2.1 2001/09/05 13:38:30 mlindner + * Removed FILE description + * + * Revision 1.1 2001/03/06 09:25:00 mlindner + * first version + * + * + * + ******************************************************************************/ + + +static const char SysKonnectFileId[] = "@(#) (C) SysKonnect GmbH."; +static const char SysKonnectBuildNumber[] = + "@(#)SK-BUILD: 6.05 PL: 01"; + +#define BOOT_STRING "sk98lin: Network Device Driver v6.05\n" \ + "(C)Copyright 1999-2003 Marvell(R)." + +#define VER_STRING "6.05" diff --git a/drivers/net/sk98lin/h/skvpd.h b/drivers/net/sk98lin/h/skvpd.h new file mode 100644 index 0000000000..1be34c5a97 --- /dev/null +++ b/drivers/net/sk98lin/h/skvpd.h @@ -0,0 +1,335 @@ +/****************************************************************************** + * + * Name: skvpd.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.15 $ + * Date: $Date: 2003/01/13 10:39:38 $ + * Purpose: Defines and Macros for VPD handling + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2003 SysKonnect GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * History: + * + * $Log: skvpd.h,v $ + * Revision 1.15 2003/01/13 10:39:38 rschmidt + * Replaced define for PCI device Id for YUKON with GENESIS + * Editorial changes + * + * Revision 1.14 2002/11/14 15:18:10 gheinig + * Added const specifier to key and buf parameters for VpdPara,VpdRead + * and VpdWrite. This is necessary for the Diag 7 GUI API + * + * Revision 1.13 2002/10/14 15:58:18 rschmidt + * Added entry in rom_size struct s_vpd + * Editorial changes + * + * Revision 1.12 2002/09/09 14:43:51 mkarl + * added PCI Id of Yukon for reading VPD in diag before the adapter has + * been initialized + * editorial changes + * + * Revision 1.11 2002/07/26 13:19:16 mkarl + * added support for Yukon + * added vpd_size to VPD struct + * + * Revision 1.10 2000/08/10 11:29:07 rassmann + * Editorial changes. + * Preserving 32-bit alignment in structs for the adapter context. + * Removed unused function VpdWriteDword() (#if 0). + * Made VpdReadKeyword() available for SKDIAG only. + * + * Revision 1.9 1999/11/22 14:02:27 cgoos + * Changed license header to GPL. + * + * Revision 1.8 1999/03/11 14:26:40 malthoff + * Replace __STDC__ with SK_KR_PROTO. + * + * Revision 1.7 1998/10/28 07:27:17 gklug + * rmv: SWAP macros + * add: VPD_IN/OUT8 macros + * chg: interface definition + * + * Revision 1.6 1998/10/22 10:03:44 gklug + * fix: use SK_OUT16 instead of SK_OUTW + * + * Revision 1.5 1998/10/14 07:05:31 cgoos + * Changed constants in SK_SWAP_32 to UL. + * + * Revision 1.4 1998/08/19 08:14:09 gklug + * fix: remove struct keyword as much as possible from the C-code (see CCC) + * + * Revision 1.3 1998/08/18 08:18:56 malthoff + * Modify VPD in and out macros for SK_DIAG + * + * Revision 1.2 1998/07/03 14:49:08 malthoff + * Add VPD_INxx() and VPD_OUTxx() macros for the Diagnostics tool. + * + * Revision 1.1 1998/06/19 14:08:03 malthoff + * Created. + * + * + ******************************************************************************/ + +/* + * skvpd.h contains Diagnostic specific defines for VPD handling + */ + +#ifndef __INC_SKVPD_H_ +#define __INC_SKVPD_H_ + +/* + * Define Resource Type Identifiers and VPD keywords + */ +#define RES_ID 0x82 /* Resource Type ID String (Product Name) */ +#define RES_VPD_R 0x90 /* start of VPD read only area */ +#define RES_VPD_W 0x91 /* start of VPD read/write area */ +#define RES_END 0x78 /* Resource Type End Tag */ + +#ifndef VPD_NAME +#define VPD_NAME "Name" /* Product Name, VPD name of RES_ID */ +#endif /* VPD_NAME */ +#define VPD_PN "PN" /* Adapter Part Number */ +#define VPD_EC "EC" /* Adapter Engineering Level */ +#define VPD_MN "MN" /* Manufacture ID */ +#define VPD_SN "SN" /* Serial Number */ +#define VPD_CP "CP" /* Extended Capability */ +#define VPD_RV "RV" /* Checksum and Reserved */ +#define VPD_YA "YA" /* Asset Tag Identifier */ +#define VPD_VL "VL" /* First Error Log Message (SK specific) */ +#define VPD_VF "VF" /* Second Error Log Message (SK specific) */ +#define VPD_RW "RW" /* Remaining Read / Write Area */ + +/* 'type' values for vpd_setup_para() */ +#define VPD_RO_KEY 1 /* RO keys are "PN", "EC", "MN", "SN", "RV" */ +#define VPD_RW_KEY 2 /* RW keys are "Yx", "Vx", and "RW" */ + +/* 'op' values for vpd_setup_para() */ +#define ADD_KEY 1 /* add the key at the pos "RV" or "RW" */ +#define OWR_KEY 2 /* overwrite key if already exists */ + +/* + * Define READ and WRITE Constants. + */ + +#define VPD_DEV_ID_GENESIS 0x4300 + +#define VPD_SIZE_YUKON 256 +#define VPD_SIZE_GENESIS 512 +#define VPD_SIZE 512 +#define VPD_READ 0x0000 +#define VPD_WRITE 0x8000 + +#define VPD_STOP(pAC,IoC) VPD_OUT16(pAC,IoC,PCI_VPD_ADR_REG,VPD_WRITE) + +#define VPD_GET_RES_LEN(p) ((unsigned int) \ + (* (SK_U8 *)&(p)[1]) |\ + ((* (SK_U8 *)&(p)[2]) << 8)) +#define VPD_GET_VPD_LEN(p) ((unsigned int)(* (SK_U8 *)&(p)[2])) +#define VPD_GET_VAL(p) ((char *)&(p)[3]) + +#define VPD_MAX_LEN 50 + +/* VPD status */ + /* bit 7..1 reserved */ +#define VPD_VALID (1<<0) /* VPD data buffer, vpd_free_ro, */ + /* and vpd_free_rw valid */ + +/* + * VPD structs + */ +typedef struct s_vpd_status { + unsigned short Align01; /* Alignment */ + unsigned short vpd_status; /* VPD status, description see above */ + int vpd_free_ro; /* unused bytes in read only area */ + int vpd_free_rw; /* bytes available in read/write area */ +} SK_VPD_STATUS; + +typedef struct s_vpd { + SK_VPD_STATUS v; /* VPD status structure */ + char vpd_buf[VPD_SIZE]; /* VPD buffer */ + int rom_size; /* VPD ROM Size from PCI_OUR_REG_2 */ + int vpd_size; /* saved VPD-size */ +} SK_VPD; + +typedef struct s_vpd_para { + unsigned int p_len; /* parameter length */ + char *p_val; /* points to the value */ +} SK_VPD_PARA; + +/* + * structure of Large Resource Type Identifiers + */ + +/* was removed because of alignment problems */ + +/* + * structure of VPD keywords + */ +typedef struct s_vpd_key { + char p_key[2]; /* 2 bytes ID string */ + unsigned char p_len; /* 1 byte length */ + char p_val; /* start of the value string */ +} SK_VPD_KEY; + + +/* + * System specific VPD macros + */ +#ifndef SKDIAG +#ifndef VPD_DO_IO +#define VPD_OUT8(pAC,IoC,Addr,Val) (void)SkPciWriteCfgByte(pAC,Addr,Val) +#define VPD_OUT16(pAC,IoC,Addr,Val) (void)SkPciWriteCfgWord(pAC,Addr,Val) +#define VPD_OUT32(pAC,IoC,Addr,Val) (void)SkPciWriteCfgDWord(pAC,Addr,Val) +#define VPD_IN8(pAC,IoC,Addr,pVal) (void)SkPciReadCfgByte(pAC,Addr,pVal) +#define VPD_IN16(pAC,IoC,Addr,pVal) (void)SkPciReadCfgWord(pAC,Addr,pVal) +#define VPD_IN32(pAC,IoC,Addr,pVal) (void)SkPciReadCfgDWord(pAC,Addr,pVal) +#else /* VPD_DO_IO */ +#define VPD_OUT8(pAC,IoC,Addr,Val) SK_OUT8(IoC,PCI_C(Addr),Val) +#define VPD_OUT16(pAC,IoC,Addr,Val) SK_OUT16(IoC,PCI_C(Addr),Val) +#define VPD_OUT32(pAC,IoC,Addr,Val) SK_OUT32(IoC,PCI_C(Addr),Val) +#define VPD_IN8(pAC,IoC,Addr,pVal) SK_IN8(IoC,PCI_C(Addr),pVal) +#define VPD_IN16(pAC,IoC,Addr,pVal) SK_IN16(IoC,PCI_C(Addr),pVal) +#define VPD_IN32(pAC,IoC,Addr,pVal) SK_IN32(IoC,PCI_C(Addr),pVal) +#endif /* VPD_DO_IO */ +#else /* SKDIAG */ +#define VPD_OUT8(pAC,Ioc,Addr,Val) { \ + if ((pAC)->DgT.DgUseCfgCycle) \ + SkPciWriteCfgByte(pAC,Addr,Val); \ + else \ + SK_OUT8(pAC,PCI_C(Addr),Val); \ + } +#define VPD_OUT16(pAC,Ioc,Addr,Val) { \ + if ((pAC)->DgT.DgUseCfgCycle) \ + SkPciWriteCfgWord(pAC,Addr,Val); \ + else \ + SK_OUT16(pAC,PCI_C(Addr),Val); \ + } +#define VPD_OUT32(pAC,Ioc,Addr,Val) { \ + if ((pAC)->DgT.DgUseCfgCycle) \ + SkPciWriteCfgDWord(pAC,Addr,Val); \ + else \ + SK_OUT32(pAC,PCI_C(Addr),Val); \ + } +#define VPD_IN8(pAC,Ioc,Addr,pVal) { \ + if ((pAC)->DgT.DgUseCfgCycle) \ + SkPciReadCfgByte(pAC,Addr,pVal); \ + else \ + SK_IN8(pAC,PCI_C(Addr),pVal); \ + } +#define VPD_IN16(pAC,Ioc,Addr,pVal) { \ + if ((pAC)->DgT.DgUseCfgCycle) \ + SkPciReadCfgWord(pAC,Addr,pVal); \ + else \ + SK_IN16(pAC,PCI_C(Addr),pVal); \ + } +#define VPD_IN32(pAC,Ioc,Addr,pVal) { \ + if ((pAC)->DgT.DgUseCfgCycle) \ + SkPciReadCfgDWord(pAC,Addr,pVal); \ + else \ + SK_IN32(pAC,PCI_C(Addr),pVal); \ + } +#endif /* nSKDIAG */ + +/* function prototypes ********************************************************/ + +#ifndef SK_KR_PROTO +#ifdef SKDIAG +extern SK_U32 VpdReadDWord( + SK_AC *pAC, + SK_IOC IoC, + int addr); +#endif /* SKDIAG */ + +extern int VpdSetupPara( + SK_AC *pAC, + const char *key, + const char *buf, + int len, + int type, + int op); + +extern SK_VPD_STATUS *VpdStat( + SK_AC *pAC, + SK_IOC IoC); + +extern int VpdKeys( + SK_AC *pAC, + SK_IOC IoC, + char *buf, + int *len, + int *elements); + +extern int VpdRead( + SK_AC *pAC, + SK_IOC IoC, + const char *key, + char *buf, + int *len); + +extern SK_BOOL VpdMayWrite( + char *key); + +extern int VpdWrite( + SK_AC *pAC, + SK_IOC IoC, + const char *key, + const char *buf); + +extern int VpdDelete( + SK_AC *pAC, + SK_IOC IoC, + char *key); + +extern int VpdUpdate( + SK_AC *pAC, + SK_IOC IoC); + +extern void VpdErrLog( + SK_AC *pAC, + SK_IOC IoC, + char *msg); + +#ifdef SKDIAG +extern int VpdReadBlock( + SK_AC *pAC, + SK_IOC IoC, + char *buf, + int addr, + int len); + +extern int VpdWriteBlock( + SK_AC *pAC, + SK_IOC IoC, + char *buf, + int addr, + int len); +#endif /* SKDIAG */ +#else /* SK_KR_PROTO */ +extern SK_U32 VpdReadDWord(); +extern int VpdSetupPara(); +extern SK_VPD_STATUS *VpdStat(); +extern int VpdKeys(); +extern int VpdRead(); +extern SK_BOOL VpdMayWrite(); +extern int VpdWrite(); +extern int VpdDelete(); +extern int VpdUpdate(); +extern void VpdErrLog(); +#endif /* SK_KR_PROTO */ + +#endif /* __INC_SKVPD_H_ */ diff --git a/drivers/net/sk98lin/h/xmac_ii.h b/drivers/net/sk98lin/h/xmac_ii.h new file mode 100644 index 0000000000..2ef903a87d --- /dev/null +++ b/drivers/net/sk98lin/h/xmac_ii.h @@ -0,0 +1,1738 @@ +/****************************************************************************** + * + * Name: xmac_ii.h + * Project: GEnesis, PCI Gigabit Ethernet Adapter + * Version: $Revision: 1.46 $ + * Date: $Date: 2003/01/28 09:47:45 $ + * Purpose: Defines and Macros for Gigabit Ethernet Controller + * + ******************************************************************************/ + +/****************************************************************************** + * + * (C)Copyright 1998-2003 SysKonnect GmbH. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * The information in this file is provided "AS IS" without warranty. + * + ******************************************************************************/ + +/****************************************************************************** + * + * History: + * + * $Log: xmac_ii.h,v $ + * Revision 1.46 2003/01/28 09:47:45 rschmidt + * Added defines for copper MDI/MDIX configuration + * Added defines for LED Control Register + * Editorial changes + * + * Revision 1.45 2002/12/10 14:35:13 rschmidt + * Corrected defines for Extended PHY Specific Control + * Added defines for Ext. PHY Specific Ctrl 2 Reg. (Fiber specific) + * + * Revision 1.44 2002/12/09 14:58:41 rschmidt + * Added defines for Ext. PHY Specific Ctrl Reg. (downshift feature) + * Added 'GMR_FS_UN_SIZE'-Bit to Rx GMAC FIFO Flush Mask + * + * Revision 1.43 2002/12/05 10:14:45 rschmidt + * Added define for GMAC's Half Duplex Burst Mode + * Added define for Rx GMAC FIFO Flush Mask (default) + * + * Revision 1.42 2002/11/12 16:48:19 rschmidt + * Added defines for Cable Diagnostic Register (GPHY) + * Editorial changes + * + * Revision 1.41 2002/10/21 11:20:22 rschmidt + * Added bit GMR_FS_GOOD_FC to GMR_FS_ANY_ERR + * Editorial changes + * + * Revision 1.40 2002/10/14 14:54:14 rschmidt + * Added defines for GPHY Specific Status and GPHY Interrupt Status + * Added bits PHY_M_IS_AN_ERROR and PHY_M_IS_FIFO_ERROR to PHY_M_DEF_MSK + * Editorial changes + * + * Revision 1.39 2002/10/10 15:53:44 mkarl + * added some bit definitions for link speed status and LED's + * + * Revision 1.38 2002/08/21 16:23:46 rschmidt + * Added defines for PHY Specific Ctrl Reg + * Editorial changes + * + * Revision 1.37 2002/08/16 14:50:33 rschmidt + * Added defines for Auto-Neg. Advertisement YUKON Fiber (88E1011S only) + * Changed define PHY_M_DEF_MSK for GPHY IRQ Mask + * Editorial changes + * + * Revision 1.36 2002/08/12 13:21:10 rschmidt + * Added defines for different Broadcom PHY Ids + * + * Revision 1.35 2002/08/08 15:58:01 rschmidt + * Added defines for Manual LED Override register (YUKON) + * Editorial changes + * + * Revision 1.34 2002/07/31 17:23:36 rwahl + * Added define GMR_FS_ANY_ERR (analogous to XMR_FS_ANY_ERR). + * + * Revision 1.33 2002/07/23 16:03:37 rschmidt + * Added defines for GPHY registers + * Editorial changes + * + * Revision 1.32 2002/07/15 18:14:37 rwahl + * Added GMAC MIB counters definitions. + * Editorial changes. + * + * Revision 1.31 2002/07/15 15:42:50 rschmidt + * Removed defines from PHY specific reg. which are + * common to all PHYs + * Added defines for GMAC MIB Counters + * Editorial changes + * + * Revision 1.30 2002/06/05 08:22:12 rschmidt + * Changed defines for GMAC Rx Control Register and Rx Status + * Editorial changes + * + * Revision 1.29 2002/04/25 11:43:56 rschmidt + * Added define PHY_B_AS_PAUSE_MSK for BCom Pause Res. + * Added new registers and defines for YUKON (GMAC, GPHY) + * Added Receive Frame Status Encoding for YUKON + * Editorial changes + * + * Revision 1.28 2000/11/09 12:32:49 rassmann + * Renamed variables. + * + * Revision 1.27 2000/05/17 11:00:46 malthoff + * Add bit for enable/disable power management in BCOM chip. + * + * Revision 1.26 1999/11/22 14:03:00 cgoos + * Changed license header to GPL. + * + * Revision 1.25 1999/08/12 19:19:38 malthoff + * Add PHY_B_AC_TX_TST bit according to BCOM A1 errata sheet. + * + * Revision 1.24 1999/07/30 11:27:21 cgoos + * Fixed a missing end-of-comment. + * + * Revision 1.23 1999/07/30 07:03:31 malthoff + * Cut some long comments. + * Correct the XMAC PHY ID definitions. + * + * Revision 1.22 1999/05/19 07:33:18 cgoos + * Changes for 1000Base-T. + * + * Revision 1.21 1999/03/25 07:46:11 malthoff + * Add XM_HW_CFG, XM_TS_READ, and XM_TS_LOAD registers. + * + * Revision 1.20 1999/03/12 13:36:09 malthoff + * Remove __STDC__. + * + * Revision 1.19 1998/12/10 12:22:54 gklug + * fix: RX_PAGE must be in interrupt mask + * + * Revision 1.18 1998/12/10 10:36:36 gklug + * fix: swap of pause bits + * + * Revision 1.17 1998/11/18 13:21:45 gklug + * fix: Default interrupt mask + * + * Revision 1.16 1998/10/29 15:53:21 gklug + * fix: Default mask uses ASS (GP0) signal + * + * Revision 1.15 1998/10/28 13:52:52 malthoff + * Add new bits in RX_CMD register. + * + * Revision 1.14 1998/10/19 15:34:53 gklug + * fix: typos + * + * Revision 1.13 1998/10/14 07:19:03 malthoff + * bug fix: Every define which describes bit 31 + * must be declared as unsigned long 'UL'. + * fix bit definitions of PHY_AN_RFB and PHY_AN_PAUSE. + * Remove ANP defines. Rework the RFB defines. + * + * Revision 1.12 1998/10/14 06:22:44 cgoos + * Changed shifted constant to ULONG. + * + * Revision 1.11 1998/10/14 05:43:26 gklug + * add: shift pause coding + * fix: PAUSE bits definition + * + * Revision 1.10 1998/10/13 09:19:21 malthoff + * Again change XMR_FS_ANY_ERR because of new info from XaQti. + * + * Revision 1.9 1998/10/09 07:58:30 malthoff + * Add XMR_FS_FCS_ERR to XMR_FS_ANY_ERR. + * + * Revision 1.8 1998/10/09 07:18:17 malthoff + * bug fix of a bug fix: XM_PAUSE_MODE and XM_DEF_MODE + * are not inverted! Bug XM_DEF_MSK is inverted. + * + * Revision 1.7 1998/10/05 08:04:32 malthoff + * bug fix: XM_PAUSE_MODE and XM_DEF_MODE + * must be inverted declarations. + * + * Revision 1.6 1998/09/28 13:38:18 malthoff + * Add default modes and masks XM_DEF_MSK, + * XM_PAUSE_MODE and XM_DEF_MODE + * + * Revision 1.5 1998/09/16 14:42:04 malthoff + * Bug Fix: XM_GP_PORT is a 32 bit (not a 16 bit) register. + * + * Revision 1.4 1998/08/20 14:59:47 malthoff + * Rework this file after reading the XaQti data sheet + * "Differences between Rev. B2 & Rev. C XMAC II". + * This file is now 100% XMAC II Rev. C complained. + * + * Revision 1.3 1998/06/29 12:18:23 malthoff + * Correct XMR_FS_ANY_ERR definition. + * + * Revision 1.2 1998/06/29 12:10:56 malthoff + * Add define XMR_FS_ANY_ERR. + * + * Revision 1.1 1998/06/19 13:37:17 malthoff + * created. + * + * + ******************************************************************************/ + +#ifndef __INC_XMAC_H +#define __INC_XMAC_H + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +/* defines ********************************************************************/ + +/* + * XMAC II registers + * + * The XMAC registers are 16 or 32 bits wide. + * The XMACs host processor interface is set to 16 bit mode, + * therefore ALL registers will be addressed with 16 bit accesses. + * + * The following macros are provided to access the XMAC registers + * XM_IN16(), XM_OUT16, XM_IN32(), XM_OUT32(), XM_INADR(), XM_OUTADR(), + * XM_INHASH(), and XM_OUTHASH(). + * The macros are defined in SkGeHw.h. + * + * Note: NA reg = Network Address e.g DA, SA etc. + * + */ +#define XM_MMU_CMD 0x0000 /* 16 bit r/w MMU Command Register */ + /* 0x0004: reserved */ +#define XM_POFF 0x0008 /* 32 bit r/w Packet Offset Register */ +#define XM_BURST 0x000c /* 32 bit r/w Burst Register for half duplex*/ +#define XM_1L_VLAN_TAG 0x0010 /* 16 bit r/w One Level VLAN Tag ID */ +#define XM_2L_VLAN_TAG 0x0014 /* 16 bit r/w Two Level VLAN Tag ID */ + /* 0x0018 - 0x001e: reserved */ +#define XM_TX_CMD 0x0020 /* 16 bit r/w Transmit Command Register */ +#define XM_TX_RT_LIM 0x0024 /* 16 bit r/w Transmit Retry Limit Register */ +#define XM_TX_STIME 0x0028 /* 16 bit r/w Transmit Slottime Register */ +#define XM_TX_IPG 0x002c /* 16 bit r/w Transmit Inter Packet Gap */ +#define XM_RX_CMD 0x0030 /* 16 bit r/w Receive Command Register */ +#define XM_PHY_ADDR 0x0034 /* 16 bit r/w PHY Address Register */ +#define XM_PHY_DATA 0x0038 /* 16 bit r/w PHY Data Register */ + /* 0x003c: reserved */ +#define XM_GP_PORT 0x0040 /* 32 bit r/w General Purpose Port Register */ +#define XM_IMSK 0x0044 /* 16 bit r/w Interrupt Mask Register */ +#define XM_ISRC 0x0048 /* 16 bit r/o Interrupt Status Register */ +#define XM_HW_CFG 0x004c /* 16 bit r/w Hardware Config Register */ + /* 0x0050 - 0x005e: reserved */ +#define XM_TX_LO_WM 0x0060 /* 16 bit r/w Tx FIFO Low Water Mark */ +#define XM_TX_HI_WM 0x0062 /* 16 bit r/w Tx FIFO High Water Mark */ +#define XM_TX_THR 0x0064 /* 16 bit r/w Tx Request Threshold */ +#define XM_HT_THR 0x0066 /* 16 bit r/w Host Request Threshold */ +#define XM_PAUSE_DA 0x0068 /* NA reg r/w Pause Destination Address */ + /* 0x006e: reserved */ +#define XM_CTL_PARA 0x0070 /* 32 bit r/w Control Parameter Register */ +#define XM_MAC_OPCODE 0x0074 /* 16 bit r/w Opcode for MAC control frames */ +#define XM_MAC_PTIME 0x0076 /* 16 bit r/w Pause time for MAC ctrl frames*/ +#define XM_TX_STAT 0x0078 /* 32 bit r/o Tx Status LIFO Register */ + + /* 0x0080 - 0x00fc: 16 NA reg r/w Exact Match Address Registers */ + /* use the XM_EXM() macro to address */ +#define XM_EXM_START 0x0080 /* r/w Start Address of the EXM Regs */ + + /* + * XM_EXM(Reg) + * + * returns the XMAC address offset of specified Exact Match Addr Reg + * + * para: Reg EXM register to addr (0 .. 15) + * + * usage: XM_INADDR(IoC, MAC_1, XM_EXM(i), &val[i]); + */ +#define XM_EXM(Reg) (XM_EXM_START + ((Reg) << 3)) + +#define XM_SRC_CHK 0x0100 /* NA reg r/w Source Check Address Register */ +#define XM_SA 0x0108 /* NA reg r/w Station Address Register */ +#define XM_HSM 0x0110 /* 64 bit r/w Hash Match Address Registers */ +#define XM_RX_LO_WM 0x0118 /* 16 bit r/w Receive Low Water Mark */ +#define XM_RX_HI_WM 0x011a /* 16 bit r/w Receive High Water Mark */ +#define XM_RX_THR 0x011c /* 32 bit r/w Receive Request Threshold */ +#define XM_DEV_ID 0x0120 /* 32 bit r/o Device ID Register */ +#define XM_MODE 0x0124 /* 32 bit r/w Mode Register */ +#define XM_LSA 0x0128 /* NA reg r/o Last Source Register */ + /* 0x012e: reserved */ +#define XM_TS_READ 0x0130 /* 32 bit r/o Time Stamp Read Register */ +#define XM_TS_LOAD 0x0134 /* 32 bit r/o Time Stamp Load Value */ + /* 0x0138 - 0x01fe: reserved */ +#define XM_STAT_CMD 0x0200 /* 16 bit r/w Statistics Command Register */ +#define XM_RX_CNT_EV 0x0204 /* 32 bit r/o Rx Counter Event Register */ +#define XM_TX_CNT_EV 0x0208 /* 32 bit r/o Tx Counter Event Register */ +#define XM_RX_EV_MSK 0x020c /* 32 bit r/w Rx Counter Event Mask */ +#define XM_TX_EV_MSK 0x0210 /* 32 bit r/w Tx Counter Event Mask */ + /* 0x0204 - 0x027e: reserved */ +#define XM_TXF_OK 0x0280 /* 32 bit r/o Frames Transmitted OK Conuter */ +#define XM_TXO_OK_HI 0x0284 /* 32 bit r/o Octets Transmitted OK High Cnt*/ +#define XM_TXO_OK_LO 0x0288 /* 32 bit r/o Octets Transmitted OK Low Cnt */ +#define XM_TXF_BC_OK 0x028c /* 32 bit r/o Broadcast Frames Xmitted OK */ +#define XM_TXF_MC_OK 0x0290 /* 32 bit r/o Multicast Frames Xmitted OK */ +#define XM_TXF_UC_OK 0x0294 /* 32 bit r/o Unicast Frames Xmitted OK */ +#define XM_TXF_LONG 0x0298 /* 32 bit r/o Tx Long Frame Counter */ +#define XM_TXE_BURST 0x029c /* 32 bit r/o Tx Burst Event Counter */ +#define XM_TXF_MPAUSE 0x02a0 /* 32 bit r/o Tx Pause MAC Ctrl Frame Cnt */ +#define XM_TXF_MCTRL 0x02a4 /* 32 bit r/o Tx MAC Ctrl Frame Counter */ +#define XM_TXF_SNG_COL 0x02a8 /* 32 bit r/o Tx Single Collision Counter */ +#define XM_TXF_MUL_COL 0x02ac /* 32 bit r/o Tx Multiple Collision Counter */ +#define XM_TXF_ABO_COL 0x02b0 /* 32 bit r/o Tx aborted due to Exces. Col. */ +#define XM_TXF_LAT_COL 0x02b4 /* 32 bit r/o Tx Late Collision Counter */ +#define XM_TXF_DEF 0x02b8 /* 32 bit r/o Tx Deferred Frame Counter */ +#define XM_TXF_EX_DEF 0x02bc /* 32 bit r/o Tx Excessive Deferall Counter */ +#define XM_TXE_FIFO_UR 0x02c0 /* 32 bit r/o Tx FIFO Underrun Event Cnt */ +#define XM_TXE_CS_ERR 0x02c4 /* 32 bit r/o Tx Carrier Sense Error Cnt */ +#define XM_TXP_UTIL 0x02c8 /* 32 bit r/o Tx Utilization in % */ + /* 0x02cc - 0x02ce: reserved */ +#define XM_TXF_64B 0x02d0 /* 32 bit r/o 64 Byte Tx Frame Counter */ +#define XM_TXF_127B 0x02d4 /* 32 bit r/o 65-127 Byte Tx Frame Counter */ +#define XM_TXF_255B 0x02d8 /* 32 bit r/o 128-255 Byte Tx Frame Counter */ +#define XM_TXF_511B 0x02dc /* 32 bit r/o 256-511 Byte Tx Frame Counter */ +#define XM_TXF_1023B 0x02e0 /* 32 bit r/o 512-1023 Byte Tx Frame Counter*/ +#define XM_TXF_MAX_SZ 0x02e4 /* 32 bit r/o 1024-MaxSize Byte Tx Frame Cnt*/ + /* 0x02e8 - 0x02fe: reserved */ +#define XM_RXF_OK 0x0300 /* 32 bit r/o Frames Received OK */ +#define XM_RXO_OK_HI 0x0304 /* 32 bit r/o Octets Received OK High Cnt */ +#define XM_RXO_OK_LO 0x0308 /* 32 bit r/o Octets Received OK Low Counter*/ +#define XM_RXF_BC_OK 0x030c /* 32 bit r/o Broadcast Frames Received OK */ +#define XM_RXF_MC_OK 0x0310 /* 32 bit r/o Multicast Frames Received OK */ +#define XM_RXF_UC_OK 0x0314 /* 32 bit r/o Unicast Frames Received OK */ +#define XM_RXF_MPAUSE 0x0318 /* 32 bit r/o Rx Pause MAC Ctrl Frame Cnt */ +#define XM_RXF_MCTRL 0x031c /* 32 bit r/o Rx MAC Ctrl Frame Counter */ +#define XM_RXF_INV_MP 0x0320 /* 32 bit r/o Rx invalid Pause Frame Cnt */ +#define XM_RXF_INV_MOC 0x0324 /* 32 bit r/o Rx Frames with inv. MAC Opcode*/ +#define XM_RXE_BURST 0x0328 /* 32 bit r/o Rx Burst Event Counter */ +#define XM_RXE_FMISS 0x032c /* 32 bit r/o Rx Missed Frames Event Cnt */ +#define XM_RXF_FRA_ERR 0x0330 /* 32 bit r/o Rx Framing Error Counter */ +#define XM_RXE_FIFO_OV 0x0334 /* 32 bit r/o Rx FIFO overflow Event Cnt */ +#define XM_RXF_JAB_PKT 0x0338 /* 32 bit r/o Rx Jabber Packet Frame Cnt */ +#define XM_RXE_CAR_ERR 0x033c /* 32 bit r/o Rx Carrier Event Error Cnt */ +#define XM_RXF_LEN_ERR 0x0340 /* 32 bit r/o Rx in Range Length Error */ +#define XM_RXE_SYM_ERR 0x0344 /* 32 bit r/o Rx Symbol Error Counter */ +#define XM_RXE_SHT_ERR 0x0348 /* 32 bit r/o Rx Short Event Error Cnt */ +#define XM_RXE_RUNT 0x034c /* 32 bit r/o Rx Runt Event Counter */ +#define XM_RXF_LNG_ERR 0x0350 /* 32 bit r/o Rx Frame too Long Error Cnt */ +#define XM_RXF_FCS_ERR 0x0354 /* 32 bit r/o Rx Frame Check Seq. Error Cnt */ + /* 0x0358 - 0x035a: reserved */ +#define XM_RXF_CEX_ERR 0x035c /* 32 bit r/o Rx Carrier Ext Error Frame Cnt*/ +#define XM_RXP_UTIL 0x0360 /* 32 bit r/o Rx Utilization in % */ + /* 0x0364 - 0x0366: reserved */ +#define XM_RXF_64B 0x0368 /* 32 bit r/o 64 Byte Rx Frame Counter */ +#define XM_RXF_127B 0x036c /* 32 bit r/o 65-127 Byte Rx Frame Counter */ +#define XM_RXF_255B 0x0370 /* 32 bit r/o 128-255 Byte Rx Frame Counter */ +#define XM_RXF_511B 0x0374 /* 32 bit r/o 256-511 Byte Rx Frame Counter */ +#define XM_RXF_1023B 0x0378 /* 32 bit r/o 512-1023 Byte Rx Frame Counter*/ +#define XM_RXF_MAX_SZ 0x037c /* 32 bit r/o 1024-MaxSize Byte Rx Frame Cnt*/ + /* 0x02e8 - 0x02fe: reserved */ + + +/*----------------------------------------------------------------------------*/ +/* + * XMAC Bit Definitions + * + * If the bit access behaviour differs from the register access behaviour + * (r/w, r/o) this is documented after the bit number. + * The following bit access behaviours are used: + * (sc) self clearing + * (ro) read only + */ + +/* XM_MMU_CMD 16 bit r/w MMU Command Register */ + /* Bit 15..13: reserved */ +#define XM_MMU_PHY_RDY (1<<12) /* Bit 12: PHY Read Ready */ +#define XM_MMU_PHY_BUSY (1<<11) /* Bit 11: PHY Busy */ +#define XM_MMU_IGN_PF (1<<10) /* Bit 10: Ignore Pause Frame */ +#define XM_MMU_MAC_LB (1<<9) /* Bit 9: Enable MAC Loopback */ + /* Bit 8: reserved */ +#define XM_MMU_FRC_COL (1<<7) /* Bit 7: Force Collision */ +#define XM_MMU_SIM_COL (1<<6) /* Bit 6: Simulate Collision */ +#define XM_MMU_NO_PRE (1<<5) /* Bit 5: No MDIO Preamble */ +#define XM_MMU_GMII_FD (1<<4) /* Bit 4: GMII uses Full Duplex */ +#define XM_MMU_RAT_CTRL (1<<3) /* Bit 3: Enable Rate Control */ +#define XM_MMU_GMII_LOOP (1<<2) /* Bit 2: PHY is in Loopback Mode */ +#define XM_MMU_ENA_RX (1<<1) /* Bit 1: Enable Receiver */ +#define XM_MMU_ENA_TX (1<<0) /* Bit 0: Enable Transmitter */ + + +/* XM_TX_CMD 16 bit r/w Transmit Command Register */ + /* Bit 15..7: reserved */ +#define XM_TX_BK2BK (1<<6) /* Bit 6: Ignor Carrier Sense (Tx Bk2Bk)*/ +#define XM_TX_ENC_BYP (1<<5) /* Bit 5: Set Encoder in Bypass Mode */ +#define XM_TX_SAM_LINE (1<<4) /* Bit 4: (sc) Start utilization calculation */ +#define XM_TX_NO_GIG_MD (1<<3) /* Bit 3: Disable Carrier Extension */ +#define XM_TX_NO_PRE (1<<2) /* Bit 2: Disable Preamble Generation */ +#define XM_TX_NO_CRC (1<<1) /* Bit 1: Disable CRC Generation */ +#define XM_TX_AUTO_PAD (1<<0) /* Bit 0: Enable Automatic Padding */ + + +/* XM_TX_RT_LIM 16 bit r/w Transmit Retry Limit Register */ + /* Bit 15..5: reserved */ +#define XM_RT_LIM_MSK 0x1f /* Bit 4..0: Tx Retry Limit */ + + +/* XM_TX_STIME 16 bit r/w Transmit Slottime Register */ + /* Bit 15..7: reserved */ +#define XM_STIME_MSK 0x7f /* Bit 6..0: Tx Slottime bits */ + + +/* XM_TX_IPG 16 bit r/w Transmit Inter Packet Gap */ + /* Bit 15..8: reserved */ +#define XM_IPG_MSK 0xff /* Bit 7..0: IPG value bits */ + + +/* XM_RX_CMD 16 bit r/w Receive Command Register */ + /* Bit 15..9: reserved */ +#define XM_RX_LENERR_OK (1<<8) /* Bit 8 don't set Rx Err bit for */ + /* inrange error packets */ +#define XM_RX_BIG_PK_OK (1<<7) /* Bit 7 don't set Rx Err bit for */ + /* jumbo packets */ +#define XM_RX_IPG_CAP (1<<6) /* Bit 6 repl. type field with IPG */ +#define XM_RX_TP_MD (1<<5) /* Bit 5: Enable transparent Mode */ +#define XM_RX_STRIP_FCS (1<<4) /* Bit 4: Enable FCS Stripping */ +#define XM_RX_SELF_RX (1<<3) /* Bit 3: Enable Rx of own packets */ +#define XM_RX_SAM_LINE (1<<2) /* Bit 2: (sc) Start utilization calculation */ +#define XM_RX_STRIP_PAD (1<<1) /* Bit 1: Strip pad bytes of Rx frames */ +#define XM_RX_DIS_CEXT (1<<0) /* Bit 0: Disable carrier ext. check */ + + +/* XM_PHY_ADDR 16 bit r/w PHY Address Register */ + /* Bit 15..5: reserved */ +#define XM_PHY_ADDR_SZ 0x1f /* Bit 4..0: PHY Address bits */ + + +/* XM_GP_PORT 32 bit r/w General Purpose Port Register */ + /* Bit 31..7: reserved */ +#define XM_GP_ANIP (1L<<6) /* Bit 6: (ro) Auto-Neg. in progress */ +#define XM_GP_FRC_INT (1L<<5) /* Bit 5: (sc) Force Interrupt */ + /* Bit 4: reserved */ +#define XM_GP_RES_MAC (1L<<3) /* Bit 3: (sc) Reset MAC and FIFOs */ +#define XM_GP_RES_STAT (1L<<2) /* Bit 2: (sc) Reset the statistics module */ + /* Bit 1: reserved */ +#define XM_GP_INP_ASS (1L<<0) /* Bit 0: (ro) GP Input Pin asserted */ + + +/* XM_IMSK 16 bit r/w Interrupt Mask Register */ +/* XM_ISRC 16 bit r/o Interrupt Status Register */ + /* Bit 15: reserved */ +#define XM_IS_LNK_AE (1<<14) /* Bit 14: Link Asynchronous Event */ +#define XM_IS_TX_ABORT (1<<13) /* Bit 13: Transmit Abort, late Col. etc */ +#define XM_IS_FRC_INT (1<<12) /* Bit 12: Force INT bit set in GP */ +#define XM_IS_INP_ASS (1<<11) /* Bit 11: Input Asserted, GP bit 0 set */ +#define XM_IS_LIPA_RC (1<<10) /* Bit 10: Link Partner requests config */ +#define XM_IS_RX_PAGE (1<<9) /* Bit 9: Page Received */ +#define XM_IS_TX_PAGE (1<<8) /* Bit 8: Next Page Loaded for Transmit */ +#define XM_IS_AND (1<<7) /* Bit 7: Auto-Negotiation Done */ +#define XM_IS_TSC_OV (1<<6) /* Bit 6: Time Stamp Counter Overflow */ +#define XM_IS_RXC_OV (1<<5) /* Bit 5: Rx Counter Event Overflow */ +#define XM_IS_TXC_OV (1<<4) /* Bit 4: Tx Counter Event Overflow */ +#define XM_IS_RXF_OV (1<<3) /* Bit 3: Receive FIFO Overflow */ +#define XM_IS_TXF_UR (1<<2) /* Bit 2: Transmit FIFO Underrun */ +#define XM_IS_TX_COMP (1<<1) /* Bit 1: Frame Tx Complete */ +#define XM_IS_RX_COMP (1<<0) /* Bit 0: Frame Rx Complete */ + +#define XM_DEF_MSK (~(XM_IS_INP_ASS | XM_IS_LIPA_RC | XM_IS_RX_PAGE |\ + XM_IS_AND | XM_IS_RXC_OV | XM_IS_TXC_OV | XM_IS_TXF_UR)) + + +/* XM_HW_CFG 16 bit r/w Hardware Config Register */ + /* Bit 15.. 4: reserved */ +#define XM_HW_GEN_EOP (1<<3) /* Bit 3: generate End of Packet pulse */ +#define XM_HW_COM4SIG (1<<2) /* Bit 2: use Comma Detect for Sig. Det.*/ + /* Bit 1: reserved */ +#define XM_HW_GMII_MD (1<<0) /* Bit 0: GMII Interface selected */ + + +/* XM_TX_LO_WM 16 bit r/w Tx FIFO Low Water Mark */ +/* XM_TX_HI_WM 16 bit r/w Tx FIFO High Water Mark */ + /* Bit 15..10 reserved */ +#define XM_TX_WM_MSK 0x01ff /* Bit 9.. 0 Tx FIFO Watermark bits */ + +/* XM_TX_THR 16 bit r/w Tx Request Threshold */ +/* XM_HT_THR 16 bit r/w Host Request Threshold */ +/* XM_RX_THR 16 bit r/w Rx Request Threshold */ + /* Bit 15..11 reserved */ +#define XM_THR_MSK 0x03ff /* Bit 10.. 0 Rx/Tx Request Threshold bits */ + + +/* XM_TX_STAT 32 bit r/o Tx Status LIFO Register */ +#define XM_ST_VALID (1UL<<31) /* Bit 31: Status Valid */ +#define XM_ST_BYTE_CNT (0x3fffL<<17) /* Bit 30..17: Tx frame Length */ +#define XM_ST_RETRY_CNT (0x1fL<<12) /* Bit 16..12: Retry Count */ +#define XM_ST_EX_COL (1L<<11) /* Bit 11: Excessive Collisions */ +#define XM_ST_EX_DEF (1L<<10) /* Bit 10: Excessive Deferral */ +#define XM_ST_BURST (1L<<9) /* Bit 9: p. xmitted in burst md*/ +#define XM_ST_DEFER (1L<<8) /* Bit 8: packet was defered */ +#define XM_ST_BC (1L<<7) /* Bit 7: Broadcast packet */ +#define XM_ST_MC (1L<<6) /* Bit 6: Multicast packet */ +#define XM_ST_UC (1L<<5) /* Bit 5: Unicast packet */ +#define XM_ST_TX_UR (1L<<4) /* Bit 4: FIFO Underrun occured */ +#define XM_ST_CS_ERR (1L<<3) /* Bit 3: Carrier Sense Error */ +#define XM_ST_LAT_COL (1L<<2) /* Bit 2: Late Collision Error */ +#define XM_ST_MUL_COL (1L<<1) /* Bit 1: Multiple Collisions */ +#define XM_ST_SGN_COL (1L<<0) /* Bit 0: Single Collision */ + +/* XM_RX_LO_WM 16 bit r/w Receive Low Water Mark */ +/* XM_RX_HI_WM 16 bit r/w Receive High Water Mark */ + /* Bit 15..11: reserved */ +#define XM_RX_WM_MSK 0x03ff /* Bit 11.. 0: Rx FIFO Watermark bits */ + + +/* XM_DEV_ID 32 bit r/o Device ID Register */ +#define XM_DEV_OUI (0x00ffffffUL<<8) /* Bit 31..8: Device OUI */ +#define XM_DEV_REV (0x07L << 5) /* Bit 7..5: Chip Rev Num */ + + +/* XM_MODE 32 bit r/w Mode Register */ + /* Bit 31..27: reserved */ +#define XM_MD_ENA_REJ (1L<<26) /* Bit 26: Enable Frame Reject */ +#define XM_MD_SPOE_E (1L<<25) /* Bit 25: Send Pause on Edge */ + /* extern generated */ +#define XM_MD_TX_REP (1L<<24) /* Bit 24: Transmit Repeater Mode */ +#define XM_MD_SPOFF_I (1L<<23) /* Bit 23: Send Pause on FIFO full */ + /* intern generated */ +#define XM_MD_LE_STW (1L<<22) /* Bit 22: Rx Stat Word in Little Endian */ +#define XM_MD_TX_CONT (1L<<21) /* Bit 21: Send Continuous */ +#define XM_MD_TX_PAUSE (1L<<20) /* Bit 20: (sc) Send Pause Frame */ +#define XM_MD_ATS (1L<<19) /* Bit 19: Append Time Stamp */ +#define XM_MD_SPOL_I (1L<<18) /* Bit 18: Send Pause on Low */ + /* intern generated */ +#define XM_MD_SPOH_I (1L<<17) /* Bit 17: Send Pause on High */ + /* intern generated */ +#define XM_MD_CAP (1L<<16) /* Bit 16: Check Address Pair */ +#define XM_MD_ENA_HASH (1L<<15) /* Bit 15: Enable Hashing */ +#define XM_MD_CSA (1L<<14) /* Bit 14: Check Station Address */ +#define XM_MD_CAA (1L<<13) /* Bit 13: Check Address Array */ +#define XM_MD_RX_MCTRL (1L<<12) /* Bit 12: Rx MAC Control Frame */ +#define XM_MD_RX_RUNT (1L<<11) /* Bit 11: Rx Runt Frames */ +#define XM_MD_RX_IRLE (1L<<10) /* Bit 10: Rx in Range Len Err Frame */ +#define XM_MD_RX_LONG (1L<<9) /* Bit 9: Rx Long Frame */ +#define XM_MD_RX_CRCE (1L<<8) /* Bit 8: Rx CRC Error Frame */ +#define XM_MD_RX_ERR (1L<<7) /* Bit 7: Rx Error Frame */ +#define XM_MD_DIS_UC (1L<<6) /* Bit 6: Disable Rx Unicast */ +#define XM_MD_DIS_MC (1L<<5) /* Bit 5: Disable Rx Multicast */ +#define XM_MD_DIS_BC (1L<<4) /* Bit 4: Disable Rx Broadcast */ +#define XM_MD_ENA_PROM (1L<<3) /* Bit 3: Enable Promiscuous */ +#define XM_MD_ENA_BE (1L<<2) /* Bit 2: Enable Big Endian */ +#define XM_MD_FTF (1L<<1) /* Bit 1: (sc) Flush Tx FIFO */ +#define XM_MD_FRF (1L<<0) /* Bit 0: (sc) Flush Rx FIFO */ + +#define XM_PAUSE_MODE (XM_MD_SPOE_E | XM_MD_SPOL_I | XM_MD_SPOH_I) +#define XM_DEF_MODE (XM_MD_RX_RUNT | XM_MD_RX_IRLE | XM_MD_RX_LONG |\ + XM_MD_RX_CRCE | XM_MD_RX_ERR | XM_MD_CSA | XM_MD_CAA) + +/* XM_STAT_CMD 16 bit r/w Statistics Command Register */ + /* Bit 16..6: reserved */ +#define XM_SC_SNP_RXC (1<<5) /* Bit 5: (sc) Snap Rx Counters */ +#define XM_SC_SNP_TXC (1<<4) /* Bit 4: (sc) Snap Tx Counters */ +#define XM_SC_CP_RXC (1<<3) /* Bit 3: Copy Rx Counters Continuously */ +#define XM_SC_CP_TXC (1<<2) /* Bit 2: Copy Tx Counters Continuously */ +#define XM_SC_CLR_RXC (1<<1) /* Bit 1: (sc) Clear Rx Counters */ +#define XM_SC_CLR_TXC (1<<0) /* Bit 0: (sc) Clear Tx Counters */ + + +/* XM_RX_CNT_EV 32 bit r/o Rx Counter Event Register */ +/* XM_RX_EV_MSK 32 bit r/w Rx Counter Event Mask */ +#define XMR_MAX_SZ_OV (1UL<<31) /* Bit 31: 1024-MaxSize Rx Cnt Ov*/ +#define XMR_1023B_OV (1L<<30) /* Bit 30: 512-1023Byte Rx Cnt Ov*/ +#define XMR_511B_OV (1L<<29) /* Bit 29: 256-511 Byte Rx Cnt Ov*/ +#define XMR_255B_OV (1L<<28) /* Bit 28: 128-255 Byte Rx Cnt Ov*/ +#define XMR_127B_OV (1L<<27) /* Bit 27: 65-127 Byte Rx Cnt Ov */ +#define XMR_64B_OV (1L<<26) /* Bit 26: 64 Byte Rx Cnt Ov */ +#define XMR_UTIL_OV (1L<<25) /* Bit 25: Rx Util Cnt Overflow */ +#define XMR_UTIL_UR (1L<<24) /* Bit 24: Rx Util Cnt Underrun */ +#define XMR_CEX_ERR_OV (1L<<23) /* Bit 23: CEXT Err Cnt Ov */ + /* Bit 22: reserved */ +#define XMR_FCS_ERR_OV (1L<<21) /* Bit 21: Rx FCS Error Cnt Ov */ +#define XMR_LNG_ERR_OV (1L<<20) /* Bit 20: Rx too Long Err Cnt Ov*/ +#define XMR_RUNT_OV (1L<<19) /* Bit 19: Runt Event Cnt Ov */ +#define XMR_SHT_ERR_OV (1L<<18) /* Bit 18: Rx Short Ev Err Cnt Ov*/ +#define XMR_SYM_ERR_OV (1L<<17) /* Bit 17: Rx Sym Err Cnt Ov */ + /* Bit 16: reserved */ +#define XMR_CAR_ERR_OV (1L<<15) /* Bit 15: Rx Carr Ev Err Cnt Ov */ +#define XMR_JAB_PKT_OV (1L<<14) /* Bit 14: Rx Jabb Packet Cnt Ov */ +#define XMR_FIFO_OV (1L<<13) /* Bit 13: Rx FIFO Ov Ev Cnt Ov */ +#define XMR_FRA_ERR_OV (1L<<12) /* Bit 12: Rx Framing Err Cnt Ov */ +#define XMR_FMISS_OV (1L<<11) /* Bit 11: Rx Missed Ev Cnt Ov */ +#define XMR_BURST (1L<<10) /* Bit 10: Rx Burst Event Cnt Ov */ +#define XMR_INV_MOC (1L<<9) /* Bit 9: Rx with inv. MAC OC Ov*/ +#define XMR_INV_MP (1L<<8) /* Bit 8: Rx inv Pause Frame Ov */ +#define XMR_MCTRL_OV (1L<<7) /* Bit 7: Rx MAC Ctrl-F Cnt Ov */ +#define XMR_MPAUSE_OV (1L<<6) /* Bit 6: Rx Pause MAC Ctrl-F Ov*/ +#define XMR_UC_OK_OV (1L<<5) /* Bit 5: Rx Unicast Frame CntOv*/ +#define XMR_MC_OK_OV (1L<<4) /* Bit 4: Rx Multicast Cnt Ov */ +#define XMR_BC_OK_OV (1L<<3) /* Bit 3: Rx Broadcast Cnt Ov */ +#define XMR_OK_LO_OV (1L<<2) /* Bit 2: Octets Rx OK Low CntOv*/ +#define XMR_OK_HI_OV (1L<<1) /* Bit 1: Octets Rx OK Hi Cnt Ov*/ +#define XMR_OK_OV (1L<<0) /* Bit 0: Frames Received Ok Ov */ + +#define XMR_DEF_MSK (XMR_OK_LO_OV | XMR_OK_HI_OV) + +/* XM_TX_CNT_EV 32 bit r/o Tx Counter Event Register */ +/* XM_TX_EV_MSK 32 bit r/w Tx Counter Event Mask */ + /* Bit 31..26: reserved */ +#define XMT_MAX_SZ_OV (1L<<25) /* Bit 25: 1024-MaxSize Tx Cnt Ov*/ +#define XMT_1023B_OV (1L<<24) /* Bit 24: 512-1023Byte Tx Cnt Ov*/ +#define XMT_511B_OV (1L<<23) /* Bit 23: 256-511 Byte Tx Cnt Ov*/ +#define XMT_255B_OV (1L<<22) /* Bit 22: 128-255 Byte Tx Cnt Ov*/ +#define XMT_127B_OV (1L<<21) /* Bit 21: 65-127 Byte Tx Cnt Ov */ +#define XMT_64B_OV (1L<<20) /* Bit 20: 64 Byte Tx Cnt Ov */ +#define XMT_UTIL_OV (1L<<19) /* Bit 19: Tx Util Cnt Overflow */ +#define XMT_UTIL_UR (1L<<18) /* Bit 18: Tx Util Cnt Underrun */ +#define XMT_CS_ERR_OV (1L<<17) /* Bit 17: Tx Carr Sen Err Cnt Ov*/ +#define XMT_FIFO_UR_OV (1L<<16) /* Bit 16: Tx FIFO Ur Ev Cnt Ov */ +#define XMT_EX_DEF_OV (1L<<15) /* Bit 15: Tx Ex Deferall Cnt Ov */ +#define XMT_DEF (1L<<14) /* Bit 14: Tx Deferred Cnt Ov */ +#define XMT_LAT_COL_OV (1L<<13) /* Bit 13: Tx Late Col Cnt Ov */ +#define XMT_ABO_COL_OV (1L<<12) /* Bit 12: Tx abo dueto Ex Col Ov*/ +#define XMT_MUL_COL_OV (1L<<11) /* Bit 11: Tx Mult Col Cnt Ov */ +#define XMT_SNG_COL (1L<<10) /* Bit 10: Tx Single Col Cnt Ov */ +#define XMT_MCTRL_OV (1L<<9) /* Bit 9: Tx MAC Ctrl Counter Ov*/ +#define XMT_MPAUSE (1L<<8) /* Bit 8: Tx Pause MAC Ctrl-F Ov*/ +#define XMT_BURST (1L<<7) /* Bit 7: Tx Burst Event Cnt Ov */ +#define XMT_LONG (1L<<6) /* Bit 6: Tx Long Frame Cnt Ov */ +#define XMT_UC_OK_OV (1L<<5) /* Bit 5: Tx Unicast Cnt Ov */ +#define XMT_MC_OK_OV (1L<<4) /* Bit 4: Tx Multicast Cnt Ov */ +#define XMT_BC_OK_OV (1L<<3) /* Bit 3: Tx Broadcast Cnt Ov */ +#define XMT_OK_LO_OV (1L<<2) /* Bit 2: Octets Tx OK Low CntOv*/ +#define XMT_OK_HI_OV (1L<<1) /* Bit 1: Octets Tx OK Hi Cnt Ov*/ +#define XMT_OK_OV (1L<<0) /* Bit 0: Frames Tx Ok Ov */ + +#define XMT_DEF_MSK (XMT_OK_LO_OV | XMT_OK_HI_OV) + +/* + * Receive Frame Status Encoding + */ +#define XMR_FS_LEN (0x3fffUL<<18) /* Bit 31..18: Rx Frame Length */ +#define XMR_FS_2L_VLAN (1L<<17) /* Bit 17: tagged wh 2Lev VLAN ID*/ +#define XMR_FS_1L_VLAN (1L<<16) /* Bit 16: tagged wh 1Lev VLAN ID*/ +#define XMR_FS_BC (1L<<15) /* Bit 15: Broadcast Frame */ +#define XMR_FS_MC (1L<<14) /* Bit 14: Multicast Frame */ +#define XMR_FS_UC (1L<<13) /* Bit 13: Unicast Frame */ + /* Bit 12: reserved */ +#define XMR_FS_BURST (1L<<11) /* Bit 11: Burst Mode */ +#define XMR_FS_CEX_ERR (1L<<10) /* Bit 10: Carrier Ext. Error */ +#define XMR_FS_802_3 (1L<<9) /* Bit 9: 802.3 Frame */ +#define XMR_FS_COL_ERR (1L<<8) /* Bit 8: Collision Error */ +#define XMR_FS_CAR_ERR (1L<<7) /* Bit 7: Carrier Event Error */ +#define XMR_FS_LEN_ERR (1L<<6) /* Bit 6: In-Range Length Error */ +#define XMR_FS_FRA_ERR (1L<<5) /* Bit 5: Framing Error */ +#define XMR_FS_RUNT (1L<<4) /* Bit 4: Runt Frame */ +#define XMR_FS_LNG_ERR (1L<<3) /* Bit 3: Giant (Jumbo) Frame */ +#define XMR_FS_FCS_ERR (1L<<2) /* Bit 2: Frame Check Sequ Err */ +#define XMR_FS_ERR (1L<<1) /* Bit 1: Frame Error */ +#define XMR_FS_MCTRL (1L<<0) /* Bit 0: MAC Control Packet */ + +/* + * XMR_FS_ERR will be set if + * XMR_FS_FCS_ERR, XMR_FS_LNG_ERR, XMR_FS_RUNT, + * XMR_FS_FRA_ERR, XMR_FS_LEN_ERR, or XMR_FS_CEX_ERR + * is set. XMR_FS_LNG_ERR and XMR_FS_LEN_ERR will issue + * XMR_FS_ERR unless the corresponding bit in the Receive Command + * Register is set. + */ +#define XMR_FS_ANY_ERR XMR_FS_ERR + +/*----------------------------------------------------------------------------*/ +/* + * XMAC-PHY Registers, indirect addressed over the XMAC + */ +#define PHY_XMAC_CTRL 0x00 /* 16 bit r/w PHY Control Register */ +#define PHY_XMAC_STAT 0x01 /* 16 bit r/w PHY Status Register */ +#define PHY_XMAC_ID0 0x02 /* 16 bit r/o PHY ID0 Register */ +#define PHY_XMAC_ID1 0x03 /* 16 bit r/o PHY ID1 Register */ +#define PHY_XMAC_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */ +#define PHY_XMAC_AUNE_LP 0x05 /* 16 bit r/o Link Partner Abi Reg */ +#define PHY_XMAC_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */ +#define PHY_XMAC_NEPG 0x07 /* 16 bit r/w Next Page Register */ +#define PHY_XMAC_NEPG_LP 0x08 /* 16 bit r/o Next Page Link P Reg */ + /* 0x09 - 0x0e: reserved */ +#define PHY_XMAC_EXT_STAT 0x0f /* 16 bit r/o Ext Status Register */ +#define PHY_XMAC_RES_ABI 0x10 /* 16 bit r/o PHY Resolved Ability */ + +/*----------------------------------------------------------------------------*/ +/* + * Broadcom-PHY Registers, indirect addressed over XMAC + */ +#define PHY_BCOM_CTRL 0x00 /* 16 bit r/w PHY Control Register */ +#define PHY_BCOM_STAT 0x01 /* 16 bit r/o PHY Status Register */ +#define PHY_BCOM_ID0 0x02 /* 16 bit r/o PHY ID0 Register */ +#define PHY_BCOM_ID1 0x03 /* 16 bit r/o PHY ID1 Register */ +#define PHY_BCOM_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */ +#define PHY_BCOM_AUNE_LP 0x05 /* 16 bit r/o Link Part Ability Reg */ +#define PHY_BCOM_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */ +#define PHY_BCOM_NEPG 0x07 /* 16 bit r/w Next Page Register */ +#define PHY_BCOM_NEPG_LP 0x08 /* 16 bit r/o Next Page Link P Reg */ + /* Broadcom-specific registers */ +#define PHY_BCOM_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Ctrl Reg */ +#define PHY_BCOM_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */ + /* 0x0b - 0x0e: reserved */ +#define PHY_BCOM_EXT_STAT 0x0f /* 16 bit r/o Extended Status Reg */ +#define PHY_BCOM_P_EXT_CTRL 0x10 /* 16 bit r/w PHY Extended Ctrl Reg */ +#define PHY_BCOM_P_EXT_STAT 0x11 /* 16 bit r/o PHY Extended Stat Reg */ +#define PHY_BCOM_RE_CTR 0x12 /* 16 bit r/w Receive Error Counter */ +#define PHY_BCOM_FC_CTR 0x13 /* 16 bit r/w False Carr Sense Cnt */ +#define PHY_BCOM_RNO_CTR 0x14 /* 16 bit r/w Receiver NOT_OK Cnt */ + /* 0x15 - 0x17: reserved */ +#define PHY_BCOM_AUX_CTRL 0x18 /* 16 bit r/w Auxiliary Control Reg */ +#define PHY_BCOM_AUX_STAT 0x19 /* 16 bit r/o Auxiliary Stat Summary */ +#define PHY_BCOM_INT_STAT 0x1a /* 16 bit r/o Interrupt Status Reg */ +#define PHY_BCOM_INT_MASK 0x1b /* 16 bit r/w Interrupt Mask Reg */ + /* 0x1c: reserved */ + /* 0x1d - 0x1f: test registers */ + +/*----------------------------------------------------------------------------*/ +/* + * Marvel-PHY Registers, indirect addressed over GMAC + */ +#define PHY_MARV_CTRL 0x00 /* 16 bit r/w PHY Control Register */ +#define PHY_MARV_STAT 0x01 /* 16 bit r/o PHY Status Register */ +#define PHY_MARV_ID0 0x02 /* 16 bit r/o PHY ID0 Register */ +#define PHY_MARV_ID1 0x03 /* 16 bit r/o PHY ID1 Register */ +#define PHY_MARV_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */ +#define PHY_MARV_AUNE_LP 0x05 /* 16 bit r/o Link Part Ability Reg */ +#define PHY_MARV_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */ +#define PHY_MARV_NEPG 0x07 /* 16 bit r/w Next Page Register */ +#define PHY_MARV_NEPG_LP 0x08 /* 16 bit r/o Next Page Link P Reg */ + /* Marvel-specific registers */ +#define PHY_MARV_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Ctrl Reg */ +#define PHY_MARV_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */ + /* 0x0b - 0x0e: reserved */ +#define PHY_MARV_EXT_STAT 0x0f /* 16 bit r/o Extended Status Reg */ +#define PHY_MARV_PHY_CTRL 0x10 /* 16 bit r/w PHY Specific Ctrl Reg */ +#define PHY_MARV_PHY_STAT 0x11 /* 16 bit r/o PHY Specific Stat Reg */ +#define PHY_MARV_INT_MASK 0x12 /* 16 bit r/w Interrupt Mask Reg */ +#define PHY_MARV_INT_STAT 0x13 /* 16 bit r/o Interrupt Status Reg */ +#define PHY_MARV_EXT_CTRL 0x14 /* 16 bit r/w Ext. PHY Specific Ctrl */ +#define PHY_MARV_RXE_CNT 0x15 /* 16 bit r/w Receive Error Counter */ +#define PHY_MARV_EXT_ADR 0x16 /* 16 bit r/w Ext. Ad. for Cable Diag. */ + /* 0x17: reserved */ +#define PHY_MARV_LED_CTRL 0x18 /* 16 bit r/w LED Control Reg */ +#define PHY_MARV_LED_OVER 0x19 /* 16 bit r/w Manual LED Override Reg */ +#define PHY_MARV_EXT_CTRL_2 0x1a /* 16 bit r/w Ext. PHY Specific Ctrl 2 */ +#define PHY_MARV_EXT_P_STAT 0x1b /* 16 bit r/w Ext. PHY Spec. Stat Reg */ +#define PHY_MARV_CABLE_DIAG 0x1c /* 16 bit r/o Cable Diagnostic Reg */ + /* 0x1d - 0x1f: reserved */ + +/*----------------------------------------------------------------------------*/ +/* + * Level One-PHY Registers, indirect addressed over XMAC + */ +#define PHY_LONE_CTRL 0x00 /* 16 bit r/w PHY Control Register */ +#define PHY_LONE_STAT 0x01 /* 16 bit r/o PHY Status Register */ +#define PHY_LONE_ID0 0x02 /* 16 bit r/o PHY ID0 Register */ +#define PHY_LONE_ID1 0x03 /* 16 bit r/o PHY ID1 Register */ +#define PHY_LONE_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */ +#define PHY_LONE_AUNE_LP 0x05 /* 16 bit r/o Link Part Ability Reg */ +#define PHY_LONE_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */ +#define PHY_LONE_NEPG 0x07 /* 16 bit r/w Next Page Register */ +#define PHY_LONE_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner*/ + /* Level One-specific registers */ +#define PHY_LONE_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Control Reg*/ +#define PHY_LONE_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */ + /* 0x0b -0x0e: reserved */ +#define PHY_LONE_EXT_STAT 0x0f /* 16 bit r/o Extended Status Reg */ +#define PHY_LONE_PORT_CFG 0x10 /* 16 bit r/w Port Configuration Reg*/ +#define PHY_LONE_Q_STAT 0x11 /* 16 bit r/o Quick Status Reg */ +#define PHY_LONE_INT_ENAB 0x12 /* 16 bit r/w Interrupt Enable Reg */ +#define PHY_LONE_INT_STAT 0x13 /* 16 bit r/o Interrupt Status Reg */ +#define PHY_LONE_LED_CFG 0x14 /* 16 bit r/w LED Configuration Reg */ +#define PHY_LONE_PORT_CTRL 0x15 /* 16 bit r/w Port Control Reg */ +#define PHY_LONE_CIM 0x16 /* 16 bit r/o CIM Reg */ + /* 0x17 -0x1c: reserved */ + +/*----------------------------------------------------------------------------*/ +/* + * National-PHY Registers, indirect addressed over XMAC + */ +#define PHY_NAT_CTRL 0x00 /* 16 bit r/w PHY Control Register */ +#define PHY_NAT_STAT 0x01 /* 16 bit r/w PHY Status Register */ +#define PHY_NAT_ID0 0x02 /* 16 bit r/o PHY ID0 Register */ +#define PHY_NAT_ID1 0x03 /* 16 bit r/o PHY ID1 Register */ +#define PHY_NAT_AUNE_ADV 0x04 /* 16 bit r/w Auto-Neg. Advertisement */ +#define PHY_NAT_AUNE_LP 0x05 /* 16 bit r/o Link Partner Ability Reg */ +#define PHY_NAT_AUNE_EXP 0x06 /* 16 bit r/o Auto-Neg. Expansion Reg */ +#define PHY_NAT_NEPG 0x07 /* 16 bit r/w Next Page Register */ +#define PHY_NAT_NEPG_LP 0x08 /* 16 bit r/o Next Page Link Partner Reg */ + /* National-specific registers */ +#define PHY_NAT_1000T_CTRL 0x09 /* 16 bit r/w 1000Base-T Control Reg */ +#define PHY_NAT_1000T_STAT 0x0a /* 16 bit r/o 1000Base-T Status Reg */ + /* 0x0b -0x0e: reserved */ +#define PHY_NAT_EXT_STAT 0x0f /* 16 bit r/o Extended Status Register */ +#define PHY_NAT_EXT_CTRL1 0x10 /* 16 bit r/o Extended Control Reg1 */ +#define PHY_NAT_Q_STAT1 0x11 /* 16 bit r/o Quick Status Reg1 */ +#define PHY_NAT_10B_OP 0x12 /* 16 bit r/o 10Base-T Operations Reg */ +#define PHY_NAT_EXT_CTRL2 0x13 /* 16 bit r/o Extended Control Reg1 */ +#define PHY_NAT_Q_STAT2 0x14 /* 16 bit r/o Quick Status Reg2 */ + /* 0x15 -0x18: reserved */ +#define PHY_NAT_PHY_ADDR 0x19 /* 16 bit r/o PHY Address Register */ + + +/*----------------------------------------------------------------------------*/ + +/* + * PHY bit definitions + * Bits defined as PHY_X_..., PHY_B_..., PHY_L_... or PHY_N_... are + * Xmac/Broadcom/LevelOne/National-specific. + * All other are general. + */ + +/***** PHY_XMAC_CTRL 16 bit r/w PHY Control Register *****/ +/***** PHY_BCOM_CTRL 16 bit r/w PHY Control Register *****/ +/***** PHY_LONE_CTRL 16 bit r/w PHY Control Register *****/ +#define PHY_CT_RESET (1<<15) /* Bit 15: (sc) clear all PHY related regs */ +#define PHY_CT_LOOP (1<<14) /* Bit 14: enable Loopback over PHY */ +#define PHY_CT_SPS_LSB (1<<13) /* Bit 13: (BC,L1) Speed select, lower bit */ +#define PHY_CT_ANE (1<<12) /* Bit 12: Auto-Negotiation Enabled */ +#define PHY_CT_PDOWN (1<<11) /* Bit 11: (BC,L1) Power Down Mode */ +#define PHY_CT_ISOL (1<<10) /* Bit 10: (BC,L1) Isolate Mode */ +#define PHY_CT_RE_CFG (1<<9) /* Bit 9: (sc) Restart Auto-Negotiation */ +#define PHY_CT_DUP_MD (1<<8) /* Bit 8: Duplex Mode */ +#define PHY_CT_COL_TST (1<<7) /* Bit 7: (BC,L1) Collision Test enabled */ +#define PHY_CT_SPS_MSB (1<<6) /* Bit 6: (BC,L1) Speed select, upper bit */ + /* Bit 5..0: reserved */ + +#define PHY_CT_SP1000 PHY_CT_SPS_MSB /* enable speed of 1000 Mbps */ +#define PHY_CT_SP100 PHY_CT_SPS_LSB /* enable speed of 100 Mbps */ +#define PHY_CT_SP10 (0) /* enable speed of 10 Mbps */ + + +/***** PHY_XMAC_STAT 16 bit r/w PHY Status Register *****/ +/***** PHY_BCOM_STAT 16 bit r/w PHY Status Register *****/ +/***** PHY_MARV_STAT 16 bit r/w PHY Status Register *****/ +/***** PHY_LONE_STAT 16 bit r/w PHY Status Register *****/ + /* Bit 15..9: reserved */ + /* (BC/L1) 100/10 Mbps cap bits ignored*/ +#define PHY_ST_EXT_ST (1<<8) /* Bit 8: Extended Status Present */ + /* Bit 7: reserved */ +#define PHY_ST_PRE_SUP (1<<6) /* Bit 6: (BC/L1) preamble suppression */ +#define PHY_ST_AN_OVER (1<<5) /* Bit 5: Auto-Negotiation Over */ +#define PHY_ST_REM_FLT (1<<4) /* Bit 4: Remote Fault Condition Occured */ +#define PHY_ST_AN_CAP (1<<3) /* Bit 3: Auto-Negotiation Capability */ +#define PHY_ST_LSYNC (1<<2) /* Bit 2: Link Synchronized */ +#define PHY_ST_JAB_DET (1<<1) /* Bit 1: (BC/L1) Jabber Detected */ +#define PHY_ST_EXT_REG (1<<0) /* Bit 0: Extended Register available */ + + +/***** PHY_XMAC_ID1 16 bit r/o PHY ID1 Register */ +/***** PHY_BCOM_ID1 16 bit r/o PHY ID1 Register */ +/***** PHY_MARV_ID1 16 bit r/o PHY ID1 Register */ +/***** PHY_LONE_ID1 16 bit r/o PHY ID1 Register */ +#define PHY_I1_OUI_MSK (0x3f<<10) /* Bit 15..10: Organization Unique ID */ +#define PHY_I1_MOD_NUM (0x3f<<4) /* Bit 9.. 4: Model Number */ +#define PHY_I1_REV_MSK 0x0f /* Bit 3.. 0: Revision Number */ + +/* different Broadcom PHY Ids */ +#define PHY_BCOM_ID1_A1 0x6041 +#define PHY_BCOM_ID1_B2 0x6043 +#define PHY_BCOM_ID1_C0 0x6044 +#define PHY_BCOM_ID1_C5 0x6047 + + +/***** PHY_XMAC_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/ +/***** PHY_XMAC_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/ +#define PHY_AN_NXT_PG (1<<15) /* Bit 15: Request Next Page */ +#define PHY_X_AN_ACK (1<<14) /* Bit 14: (ro) Acknowledge Received */ +#define PHY_X_AN_RFB (3<<12) /* Bit 13..12: Remote Fault Bits */ + /* Bit 11.. 9: reserved */ +#define PHY_X_AN_PAUSE (3<<7) /* Bit 8.. 7: Pause Bits */ +#define PHY_X_AN_HD (1<<6) /* Bit 6: Half Duplex */ +#define PHY_X_AN_FD (1<<5) /* Bit 5: Full Duplex */ + /* Bit 4.. 0: reserved */ + +/***** PHY_BCOM_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/ +/***** PHY_BCOM_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/ +/* PHY_AN_NXT_PG (see XMAC) Bit 15: Request Next Page */ + /* Bit 14: reserved */ +#define PHY_B_AN_RF (1<<13) /* Bit 13: Remote Fault */ + /* Bit 12: reserved */ +#define PHY_B_AN_ASP (1<<11) /* Bit 11: Asymmetric Pause */ +#define PHY_B_AN_PC (1<<10) /* Bit 10: Pause Capable */ + /* Bit 9..5: 100/10 BT cap bits ingnored */ +#define PHY_B_AN_SEL 0x1f /* Bit 4..0: Selector Field, 00001=Ethernet*/ + +/***** PHY_LONE_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/ +/***** PHY_LONE_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/ +/* PHY_AN_NXT_PG (see XMAC) Bit 15: Request Next Page */ + /* Bit 14: reserved */ +#define PHY_L_AN_RF (1<<13) /* Bit 13: Remote Fault */ + /* Bit 12: reserved */ +#define PHY_L_AN_ASP (1<<11) /* Bit 11: Asymmetric Pause */ +#define PHY_L_AN_PC (1<<10) /* Bit 10: Pause Capable */ + /* Bit 9..5: 100/10 BT cap bits ingnored */ +#define PHY_L_AN_SEL 0x1f /* Bit 4..0: Selector Field, 00001=Ethernet*/ + +/***** PHY_NAT_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/ +/***** PHY_NAT_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/ +/* PHY_AN_NXT_PG (see XMAC) Bit 15: Request Next Page */ + /* Bit 14: reserved */ +#define PHY_N_AN_RF (1<<13) /* Bit 13: Remote Fault */ + /* Bit 12: reserved */ +#define PHY_N_AN_100F (1<<11) /* Bit 11: 100Base-T2 FD Support */ +#define PHY_N_AN_100H (1<<10) /* Bit 10: 100Base-T2 HD Support */ + /* Bit 9..5: 100/10 BT cap bits ingnored */ +#define PHY_N_AN_SEL 0x1f /* Bit 4..0: Selector Field, 00001=Ethernet*/ + +/* field type definition for PHY_x_AN_SEL */ +#define PHY_SEL_TYPE 0x01 /* 00001 = Ethernet */ + +/***** PHY_XMAC_AUNE_EXP 16 bit r/o Auto-Negotiation Expansion Reg *****/ + /* Bit 15..4: reserved */ +#define PHY_AN_LP_NP (1<<3) /* Bit 3: Link Partner can Next Page */ +#define PHY_AN_LOC_NP (1<<2) /* Bit 2: Local PHY can Next Page */ +#define PHY_AN_RX_PG (1<<1) /* Bit 1: Page Received */ + /* Bit 0: reserved */ + +/***** PHY_BCOM_AUNE_EXP 16 bit r/o Auto-Negotiation Expansion Reg *****/ + /* Bit 15..5: reserved */ +#define PHY_B_AN_PDF (1<<4) /* Bit 4: Parallel Detection Fault */ +/* PHY_AN_LP_NP (see XMAC) Bit 3: Link Partner can Next Page */ +/* PHY_AN_LOC_NP (see XMAC) Bit 2: Local PHY can Next Page */ +/* PHY_AN_RX_PG (see XMAC) Bit 1: Page Received */ +#define PHY_B_AN_LP_CAP (1<<0) /* Bit 0: Link Partner Auto-Neg. Cap. */ + +/***** PHY_LONE_AUNE_EXP 16 bit r/o Auto-Negotiation Expansion Reg *****/ +#define PHY_L_AN_BP (1<<5) /* Bit 5: Base Page Indication */ +#define PHY_L_AN_PDF (1<<4) /* Bit 4: Parallel Detection Fault */ +/* PHY_AN_LP_NP (see XMAC) Bit 3: Link Partner can Next Page */ +/* PHY_AN_LOC_NP (see XMAC) Bit 2: Local PHY can Next Page */ +/* PHY_AN_RX_PG (see XMAC) Bit 1: Page Received */ +#define PHY_B_AN_LP_CAP (1<<0) /* Bit 0: Link Partner Auto-Neg. Cap. */ + + +/***** PHY_XMAC_NEPG 16 bit r/w Next Page Register *****/ +/***** PHY_BCOM_NEPG 16 bit r/w Next Page Register *****/ +/***** PHY_LONE_NEPG 16 bit r/w Next Page Register *****/ +/***** PHY_XMAC_NEPG_LP 16 bit r/o Next Page Link Partner *****/ +/***** PHY_BCOM_NEPG_LP 16 bit r/o Next Page Link Partner *****/ +/***** PHY_LONE_NEPG_LP 16 bit r/o Next Page Link Partner *****/ +#define PHY_NP_MORE (1<<15) /* Bit 15: More, Next Pages to follow */ +#define PHY_NP_ACK1 (1<<14) /* Bit 14: (ro) Ack 1, for receiving a message*/ +#define PHY_NP_MSG_VAL (1<<13) /* Bit 13: Message Page valid */ +#define PHY_NP_ACK2 (1<<12) /* Bit 12: Ack 2, comply with msg content*/ +#define PHY_NP_TOG (1<<11) /* Bit 11: Toggle Bit, ensure sync */ +#define PHY_NP_MSG 0x07ff /* Bit 10..0: Message from/to Link Partner */ + +/* + * XMAC-Specific + */ +/***** PHY_XMAC_EXT_STAT 16 bit r/w Extended Status Register *****/ +#define PHY_X_EX_FD (1<<15) /* Bit 15: Device Supports Full Duplex */ +#define PHY_X_EX_HD (1<<14) /* Bit 14: Device Supports Half Duplex */ + /* Bit 13..0: reserved */ + +/***** PHY_XMAC_RES_ABI 16 bit r/o PHY Resolved Ability *****/ + /* Bit 15..9: reserved */ +#define PHY_X_RS_PAUSE (3<<7) /* Bit 8..7: selected Pause Mode */ +#define PHY_X_RS_HD (1<<6) /* Bit 6: Half Duplex Mode selected */ +#define PHY_X_RS_FD (1<<5) /* Bit 5: Full Duplex Mode selected */ +#define PHY_X_RS_ABLMIS (1<<4) /* Bit 4: duplex or pause cap mismatch */ +#define PHY_X_RS_PAUMIS (1<<3) /* Bit 3: pause capability missmatch */ + /* Bit 2..0: reserved */ +/* + * Remote Fault Bits (PHY_X_AN_RFB) encoding + */ +#define X_RFB_OK (0<<12) /* Bit 13..12 No errors, Link OK */ +#define X_RFB_LF (1<<12) /* Bit 13..12 Link Failure */ +#define X_RFB_OFF (2<<12) /* Bit 13..12 Offline */ +#define X_RFB_AN_ERR (3<<12) /* Bit 13..12 Auto-Negotiation Error */ + +/* + * Pause Bits (PHY_X_AN_PAUSE and PHY_X_RS_PAUSE) encoding + */ +#define PHY_X_P_NO_PAUSE (0<<7) /* Bit 8..7: no Pause Mode */ +#define PHY_X_P_SYM_MD (1<<7) /* Bit 8..7: symmetric Pause Mode */ +#define PHY_X_P_ASYM_MD (2<<7) /* Bit 8..7: asymmetric Pause Mode */ +#define PHY_X_P_BOTH_MD (3<<7) /* Bit 8..7: both Pause Mode */ + + +/* + * Broadcom-Specific + */ +/***** PHY_BCOM_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ +#define PHY_B_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */ +#define PHY_B_1000C_MSE (1<<12) /* Bit 12: Master/Slave Enable */ +#define PHY_B_1000C_MSC (1<<11) /* Bit 11: M/S Configuration */ +#define PHY_B_1000C_RD (1<<10) /* Bit 10: Repeater/DTE */ +#define PHY_B_1000C_AFD (1<<9) /* Bit 9: Advertise Full Duplex */ +#define PHY_B_1000C_AHD (1<<8) /* Bit 8: Advertise Half Duplex */ + /* Bit 7..0: reserved */ + +/***** PHY_BCOM_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ +#define PHY_B_1000S_MSF (1<<15) /* Bit 15: Master/Slave Fault */ +#define PHY_B_1000S_MSR (1<<14) /* Bit 14: Master/Slave Result */ +#define PHY_B_1000S_LRS (1<<13) /* Bit 13: Local Receiver Status */ +#define PHY_B_1000S_RRS (1<<12) /* Bit 12: Remote Receiver Status */ +#define PHY_B_1000S_LP_FD (1<<11) /* Bit 11: Link Partner can FD */ +#define PHY_B_1000S_LP_HD (1<<10) /* Bit 10: Link Partner can HD */ + /* Bit 9..8: reserved */ +#define PHY_B_1000S_IEC 0xff /* Bit 7..0: Idle Error Count */ + +/***** PHY_BCOM_EXT_STAT 16 bit r/o Extended Status Register *****/ +#define PHY_B_ES_X_FD_CAP (1<<15) /* Bit 15: 1000Base-X FD capable */ +#define PHY_B_ES_X_HD_CAP (1<<14) /* Bit 14: 1000Base-X HD capable */ +#define PHY_B_ES_T_FD_CAP (1<<13) /* Bit 13: 1000Base-T FD capable */ +#define PHY_B_ES_T_HD_CAP (1<<12) /* Bit 12: 1000Base-T HD capable */ + /* Bit 11..0: reserved */ + +/***** PHY_BCOM_P_EXT_CTRL 16 bit r/w PHY Extended Control Reg *****/ +#define PHY_B_PEC_MAC_PHY (1<<15) /* Bit 15: 10BIT/GMI-Interface */ +#define PHY_B_PEC_DIS_CROSS (1<<14) /* Bit 14: Disable MDI Crossover */ +#define PHY_B_PEC_TX_DIS (1<<13) /* Bit 13: Tx output Disabled */ +#define PHY_B_PEC_INT_DIS (1<<12) /* Bit 12: Interrupts Disabled */ +#define PHY_B_PEC_F_INT (1<<11) /* Bit 11: Force Interrupt */ +#define PHY_B_PEC_BY_45 (1<<10) /* Bit 10: Bypass 4B5B-Decoder */ +#define PHY_B_PEC_BY_SCR (1<<9) /* Bit 9: Bypass Scrambler */ +#define PHY_B_PEC_BY_MLT3 (1<<8) /* Bit 8: Bypass MLT3 Encoder */ +#define PHY_B_PEC_BY_RXA (1<<7) /* Bit 7: Bypass Rx Alignm. */ +#define PHY_B_PEC_RES_SCR (1<<6) /* Bit 6: Reset Scrambler */ +#define PHY_B_PEC_EN_LTR (1<<5) /* Bit 5: Ena LED Traffic Mode */ +#define PHY_B_PEC_LED_ON (1<<4) /* Bit 4: Force LED's on */ +#define PHY_B_PEC_LED_OFF (1<<3) /* Bit 3: Force LED's off */ +#define PHY_B_PEC_EX_IPG (1<<2) /* Bit 2: Extend Tx IPG Mode */ +#define PHY_B_PEC_3_LED (1<<1) /* Bit 1: Three Link LED mode */ +#define PHY_B_PEC_HIGH_LA (1<<0) /* Bit 0: GMII FIFO Elasticy */ + +/***** PHY_BCOM_P_EXT_STAT 16 bit r/o PHY Extended Status Reg *****/ + /* Bit 15..14: reserved */ +#define PHY_B_PES_CROSS_STAT (1<<13) /* Bit 13: MDI Crossover Status */ +#define PHY_B_PES_INT_STAT (1<<12) /* Bit 12: Interrupt Status */ +#define PHY_B_PES_RRS (1<<11) /* Bit 11: Remote Receiver Stat. */ +#define PHY_B_PES_LRS (1<<10) /* Bit 10: Local Receiver Stat. */ +#define PHY_B_PES_LOCKED (1<<9) /* Bit 9: Locked */ +#define PHY_B_PES_LS (1<<8) /* Bit 8: Link Status */ +#define PHY_B_PES_RF (1<<7) /* Bit 7: Remote Fault */ +#define PHY_B_PES_CE_ER (1<<6) /* Bit 6: Carrier Ext Error */ +#define PHY_B_PES_BAD_SSD (1<<5) /* Bit 5: Bad SSD */ +#define PHY_B_PES_BAD_ESD (1<<4) /* Bit 4: Bad ESD */ +#define PHY_B_PES_RX_ER (1<<3) /* Bit 3: Receive Error */ +#define PHY_B_PES_TX_ER (1<<2) /* Bit 2: Transmit Error */ +#define PHY_B_PES_LOCK_ER (1<<1) /* Bit 1: Lock Error */ +#define PHY_B_PES_MLT3_ER (1<<0) /* Bit 0: MLT3 code Error */ + +/***** PHY_BCOM_FC_CTR 16 bit r/w False Carrier Counter *****/ + /* Bit 15..8: reserved */ +#define PHY_B_FC_CTR 0xff /* Bit 7..0: False Carrier Counter */ + +/***** PHY_BCOM_RNO_CTR 16 bit r/w Receive NOT_OK Counter *****/ +#define PHY_B_RC_LOC_MSK 0xff00 /* Bit 15..8: Local Rx NOT_OK cnt */ +#define PHY_B_RC_REM_MSK 0x00ff /* Bit 7..0: Remote Rx NOT_OK cnt */ + +/***** PHY_BCOM_AUX_CTRL 16 bit r/w Auxiliary Control Reg *****/ +#define PHY_B_AC_L_SQE (1<<15) /* Bit 15: Low Squelch */ +#define PHY_B_AC_LONG_PACK (1<<14) /* Bit 14: Rx Long Packets */ +#define PHY_B_AC_ER_CTRL (3<<12) /* Bit 13..12: Edgerate Control */ + /* Bit 11: reserved */ +#define PHY_B_AC_TX_TST (1<<10) /* Bit 10: Tx test bit, always 1 */ + /* Bit 9.. 8: reserved */ +#define PHY_B_AC_DIS_PRF (1<<7) /* Bit 7: dis part resp filter */ + /* Bit 6: reserved */ +#define PHY_B_AC_DIS_PM (1<<5) /* Bit 5: dis power management */ + /* Bit 4: reserved */ +#define PHY_B_AC_DIAG (1<<3) /* Bit 3: Diagnostic Mode */ + /* Bit 2.. 0: reserved */ + +/***** PHY_BCOM_AUX_STAT 16 bit r/o Auxiliary Status Reg *****/ +#define PHY_B_AS_AN_C (1<<15) /* Bit 15: AutoNeg complete */ +#define PHY_B_AS_AN_CA (1<<14) /* Bit 14: AN Complete Ack */ +#define PHY_B_AS_ANACK_D (1<<13) /* Bit 13: AN Ack Detect */ +#define PHY_B_AS_ANAB_D (1<<12) /* Bit 12: AN Ability Detect */ +#define PHY_B_AS_NPW (1<<11) /* Bit 11: AN Next Page Wait */ +#define PHY_B_AS_AN_RES_MSK (7<<8) /* Bit 10..8: AN HDC */ +#define PHY_B_AS_PDF (1<<7) /* Bit 7: Parallel Detect. Fault */ +#define PHY_B_AS_RF (1<<6) /* Bit 6: Remote Fault */ +#define PHY_B_AS_ANP_R (1<<5) /* Bit 5: AN Page Received */ +#define PHY_B_AS_LP_ANAB (1<<4) /* Bit 4: LP AN Ability */ +#define PHY_B_AS_LP_NPAB (1<<3) /* Bit 3: LP Next Page Ability */ +#define PHY_B_AS_LS (1<<2) /* Bit 2: Link Status */ +#define PHY_B_AS_PRR (1<<1) /* Bit 1: Pause Resolution-Rx */ +#define PHY_B_AS_PRT (1<<0) /* Bit 0: Pause Resolution-Tx */ + +#define PHY_B_AS_PAUSE_MSK (PHY_B_AS_PRR | PHY_B_AS_PRT) + +/***** PHY_BCOM_INT_STAT 16 bit r/o Interrupt Status Reg *****/ +/***** PHY_BCOM_INT_MASK 16 bit r/w Interrupt Mask Reg *****/ + /* Bit 15: reserved */ +#define PHY_B_IS_PSE (1<<14) /* Bit 14: Pair Swap Error */ +#define PHY_B_IS_MDXI_SC (1<<13) /* Bit 13: MDIX Status Change */ +#define PHY_B_IS_HCT (1<<12) /* Bit 12: counter above 32k */ +#define PHY_B_IS_LCT (1<<11) /* Bit 11: counter above 128 */ +#define PHY_B_IS_AN_PR (1<<10) /* Bit 10: Page Received */ +#define PHY_B_IS_NO_HDCL (1<<9) /* Bit 9: No HCD Link */ +#define PHY_B_IS_NO_HDC (1<<8) /* Bit 8: No HCD */ +#define PHY_B_IS_NEG_USHDC (1<<7) /* Bit 7: Negotiated Unsup. HCD */ +#define PHY_B_IS_SCR_S_ER (1<<6) /* Bit 6: Scrambler Sync Error */ +#define PHY_B_IS_RRS_CHANGE (1<<5) /* Bit 5: Remote Rx Stat Change */ +#define PHY_B_IS_LRS_CHANGE (1<<4) /* Bit 4: Local Rx Stat Change */ +#define PHY_B_IS_DUP_CHANGE (1<<3) /* Bit 3: Duplex Mode Change */ +#define PHY_B_IS_LSP_CHANGE (1<<2) /* Bit 2: Link Speed Change */ +#define PHY_B_IS_LST_CHANGE (1<<1) /* Bit 1: Link Status Changed */ +#define PHY_B_IS_CRC_ER (1<<0) /* Bit 0: CRC Error */ + +#define PHY_B_DEF_MSK (~(PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) + +/* Pause Bits (PHY_B_AN_ASP and PHY_B_AN_PC) encoding */ +#define PHY_B_P_NO_PAUSE (0<<10) /* Bit 11..10: no Pause Mode */ +#define PHY_B_P_SYM_MD (1<<10) /* Bit 11..10: symmetric Pause Mode */ +#define PHY_B_P_ASYM_MD (2<<10) /* Bit 11..10: asymmetric Pause Mode */ +#define PHY_B_P_BOTH_MD (3<<10) /* Bit 11..10: both Pause Mode */ + +/* + * Resolved Duplex mode and Capabilities (Aux Status Summary Reg) + */ +#define PHY_B_RES_1000FD (7<<8) /* Bit 10..8: 1000Base-T Full Dup. */ +#define PHY_B_RES_1000HD (6<<8) /* Bit 10..8: 1000Base-T Half Dup. */ +/* others: 100/10: invalid for us */ + +/* + * Level One-Specific + */ +/***** PHY_LONE_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ +#define PHY_L_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */ +#define PHY_L_1000C_MSE (1<<12) /* Bit 12: Master/Slave Enable */ +#define PHY_L_1000C_MSC (1<<11) /* Bit 11: M/S Configuration */ +#define PHY_L_1000C_RD (1<<10) /* Bit 10: Repeater/DTE */ +#define PHY_L_1000C_AFD (1<<9) /* Bit 9: Advertise Full Duplex */ +#define PHY_L_1000C_AHD (1<<8) /* Bit 8: Advertise Half Duplex */ + /* Bit 7..0: reserved */ + +/***** PHY_LONE_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ +#define PHY_L_1000S_MSF (1<<15) /* Bit 15: Master/Slave Fault */ +#define PHY_L_1000S_MSR (1<<14) /* Bit 14: Master/Slave Result */ +#define PHY_L_1000S_LRS (1<<13) /* Bit 13: Local Receiver Status */ +#define PHY_L_1000S_RRS (1<<12) /* Bit 12: Remote Receiver Status*/ +#define PHY_L_1000S_LP_FD (1<<11) /* Bit 11: Link Partner can FD */ +#define PHY_L_1000S_LP_HD (1<<10) /* Bit 10: Link Partner can HD */ + /* Bit 9..8: reserved */ +#define PHY_B_1000S_IEC 0xff /* Bit 7..0: Idle Error Count */ + +/***** PHY_LONE_EXT_STAT 16 bit r/o Extended Status Register *****/ +#define PHY_L_ES_X_FD_CAP (1<<15) /* Bit 15: 1000Base-X FD capable */ +#define PHY_L_ES_X_HD_CAP (1<<14) /* Bit 14: 1000Base-X HD capable */ +#define PHY_L_ES_T_FD_CAP (1<<13) /* Bit 13: 1000Base-T FD capable */ +#define PHY_L_ES_T_HD_CAP (1<<12) /* Bit 12: 1000Base-T HD capable */ + /* Bit 11..0: reserved */ + +/***** PHY_LONE_PORT_CFG 16 bit r/w Port Configuration Reg *****/ +#define PHY_L_PC_REP_MODE (1<<15) /* Bit 15: Repeater Mode */ + /* Bit 14: reserved */ +#define PHY_L_PC_TX_DIS (1<<13) /* Bit 13: Tx output Disabled */ +#define PHY_L_PC_BY_SCR (1<<12) /* Bit 12: Bypass Scrambler */ +#define PHY_L_PC_BY_45 (1<<11) /* Bit 11: Bypass 4B5B-Decoder */ +#define PHY_L_PC_JAB_DIS (1<<10) /* Bit 10: Jabber Disabled */ +#define PHY_L_PC_SQE (1<<9) /* Bit 9: Enable Heartbeat */ +#define PHY_L_PC_TP_LOOP (1<<8) /* Bit 8: TP Loopback */ +#define PHY_L_PC_SSS (1<<7) /* Bit 7: Smart Speed Selection */ +#define PHY_L_PC_FIFO_SIZE (1<<6) /* Bit 6: FIFO Size */ +#define PHY_L_PC_PRE_EN (1<<5) /* Bit 5: Preamble Enable */ +#define PHY_L_PC_CIM (1<<4) /* Bit 4: Carrier Integrity Mon */ +#define PHY_L_PC_10_SER (1<<3) /* Bit 3: Use Serial Output */ +#define PHY_L_PC_ANISOL (1<<2) /* Bit 2: Unisolate Port */ +#define PHY_L_PC_TEN_BIT (1<<1) /* Bit 1: 10bit iface mode on */ +#define PHY_L_PC_ALTCLOCK (1<<0) /* Bit 0: (ro) ALTCLOCK Mode on */ + +/***** PHY_LONE_Q_STAT 16 bit r/o Quick Status Reg *****/ +#define PHY_L_QS_D_RATE (3<<14) /* Bit 15..14: Data Rate */ +#define PHY_L_QS_TX_STAT (1<<13) /* Bit 13: Transmitting */ +#define PHY_L_QS_RX_STAT (1<<12) /* Bit 12: Receiving */ +#define PHY_L_QS_COL_STAT (1<<11) /* Bit 11: Collision */ +#define PHY_L_QS_L_STAT (1<<10) /* Bit 10: Link is up */ +#define PHY_L_QS_DUP_MOD (1<<9) /* Bit 9: Full/Half Duplex */ +#define PHY_L_QS_AN (1<<8) /* Bit 8: AutoNeg is On */ +#define PHY_L_QS_AN_C (1<<7) /* Bit 7: AN is Complete */ +#define PHY_L_QS_LLE (7<<4) /* Bit 6: Line Length Estim. */ +#define PHY_L_QS_PAUSE (1<<3) /* Bit 3: LP advertised Pause */ +#define PHY_L_QS_AS_PAUSE (1<<2) /* Bit 2: LP adv. asym. Pause */ +#define PHY_L_QS_ISOLATE (1<<1) /* Bit 1: CIM Isolated */ +#define PHY_L_QS_EVENT (1<<0) /* Bit 0: Event has occurred */ + +/***** PHY_LONE_INT_ENAB 16 bit r/w Interrupt Enable Reg *****/ +/***** PHY_LONE_INT_STAT 16 bit r/o Interrupt Status Reg *****/ + /* Bit 15..14: reserved */ +#define PHY_L_IS_AN_F (1<<13) /* Bit 13: Auto-Negotiation fault */ + /* Bit 12: not described */ +#define PHY_L_IS_CROSS (1<<11) /* Bit 11: Crossover used */ +#define PHY_L_IS_POL (1<<10) /* Bit 10: Polarity correct. used*/ +#define PHY_L_IS_SS (1<<9) /* Bit 9: Smart Speed Downgrade*/ +#define PHY_L_IS_CFULL (1<<8) /* Bit 8: Counter Full */ +#define PHY_L_IS_AN_C (1<<7) /* Bit 7: AutoNeg Complete */ +#define PHY_L_IS_SPEED (1<<6) /* Bit 6: Speed Changed */ +#define PHY_L_IS_DUP (1<<5) /* Bit 5: Duplex Changed */ +#define PHY_L_IS_LS (1<<4) /* Bit 4: Link Status Changed */ +#define PHY_L_IS_ISOL (1<<3) /* Bit 3: Isolate Occured */ +#define PHY_L_IS_MDINT (1<<2) /* Bit 2: (ro) STAT: MII Int Pending */ +#define PHY_L_IS_INTEN (1<<1) /* Bit 1: ENAB: Enable IRQs */ +#define PHY_L_IS_FORCE (1<<0) /* Bit 0: ENAB: Force Interrupt */ + +/* int. mask */ +#define PHY_L_DEF_MSK (PHY_L_IS_LS | PHY_L_IS_ISOL | PHY_L_IS_INTEN) + +/***** PHY_LONE_LED_CFG 16 bit r/w LED Configuration Reg *****/ +#define PHY_L_LC_LEDC (3<<14) /* Bit 15..14: Col/Blink/On/Off */ +#define PHY_L_LC_LEDR (3<<12) /* Bit 13..12: Rx/Blink/On/Off */ +#define PHY_L_LC_LEDT (3<<10) /* Bit 11..10: Tx/Blink/On/Off */ +#define PHY_L_LC_LEDG (3<<8) /* Bit 9..8: Giga/Blink/On/Off */ +#define PHY_L_LC_LEDS (3<<6) /* Bit 7..6: 10-100/Blink/On/Off */ +#define PHY_L_LC_LEDL (3<<4) /* Bit 5..4: Link/Blink/On/Off */ +#define PHY_L_LC_LEDF (3<<2) /* Bit 3..2: Duplex/Blink/On/Off */ +#define PHY_L_LC_PSTRECH (1<<1) /* Bit 1: Strech LED Pulses */ +#define PHY_L_LC_FREQ (1<<0) /* Bit 0: 30/100 ms */ + +/***** PHY_LONE_PORT_CTRL 16 bit r/w Port Control Reg *****/ +#define PHY_L_PC_TX_TCLK (1<<15) /* Bit 15: Enable TX_TCLK */ + /* Bit 14: reserved */ +#define PHY_L_PC_ALT_NP (1<<13) /* Bit 14: Alternate Next Page */ +#define PHY_L_PC_GMII_ALT (1<<12) /* Bit 13: Alternate GMII driver */ + /* Bit 11: reserved */ +#define PHY_L_PC_TEN_CRS (1<<10) /* Bit 10: Extend CRS*/ + /* Bit 9..0: not described */ + +/***** PHY_LONE_CIM 16 bit r/o CIM Reg *****/ +#define PHY_L_CIM_ISOL (255<<8)/* Bit 15..8: Isolate Count */ +#define PHY_L_CIM_FALSE_CAR (255<<0)/* Bit 7..0: False Carrier Count */ + + +/* + * Pause Bits (PHY_L_AN_ASP and PHY_L_AN_PC) encoding + */ +#define PHY_L_P_NO_PAUSE (0<<10) /* Bit 11..10: no Pause Mode */ +#define PHY_L_P_SYM_MD (1<<10) /* Bit 11..10: symmetric Pause Mode */ +#define PHY_L_P_ASYM_MD (2<<10) /* Bit 11..10: asymmetric Pause Mode */ +#define PHY_L_P_BOTH_MD (3<<10) /* Bit 11..10: both Pause Mode */ + + +/* + * National-Specific + */ +/***** PHY_NAT_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ +#define PHY_N_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */ +#define PHY_N_1000C_MSE (1<<12) /* Bit 12: Master/Slave Enable */ +#define PHY_N_1000C_MSC (1<<11) /* Bit 11: M/S Configuration */ +#define PHY_N_1000C_RD (1<<10) /* Bit 10: Repeater/DTE */ +#define PHY_N_1000C_AFD (1<<9) /* Bit 9: Advertise Full Duplex */ +#define PHY_N_1000C_AHD (1<<8) /* Bit 8: Advertise Half Duplex */ +#define PHY_N_1000C_APC (1<<7) /* Bit 7: Asymmetric Pause Cap. */ + /* Bit 6..0: reserved */ + +/***** PHY_NAT_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ +#define PHY_N_1000S_MSF (1<<15) /* Bit 15: Master/Slave Fault */ +#define PHY_N_1000S_MSR (1<<14) /* Bit 14: Master/Slave Result */ +#define PHY_N_1000S_LRS (1<<13) /* Bit 13: Local Receiver Status */ +#define PHY_N_1000S_RRS (1<<12) /* Bit 12: Remote Receiver Status*/ +#define PHY_N_1000S_LP_FD (1<<11) /* Bit 11: Link Partner can FD */ +#define PHY_N_1000S_LP_HD (1<<10) /* Bit 10: Link Partner can HD */ +#define PHY_N_1000C_LP_APC (1<<9) /* Bit 9: LP Asym. Pause Cap. */ + /* Bit 8: reserved */ +#define PHY_N_1000S_IEC 0xff /* Bit 7..0: Idle Error Count */ + +/***** PHY_NAT_EXT_STAT 16 bit r/o Extended Status Register *****/ +#define PHY_N_ES_X_FD_CAP (1<<15) /* Bit 15: 1000Base-X FD capable */ +#define PHY_N_ES_X_HD_CAP (1<<14) /* Bit 14: 1000Base-X HD capable */ +#define PHY_N_ES_T_FD_CAP (1<<13) /* Bit 13: 1000Base-T FD capable */ +#define PHY_N_ES_T_HD_CAP (1<<12) /* Bit 12: 1000Base-T HD capable */ + /* Bit 11..0: reserved */ + +/* todo: those are still missing */ +/***** PHY_NAT_EXT_CTRL1 16 bit r/o Extended Control Reg1 *****/ +/***** PHY_NAT_Q_STAT1 16 bit r/o Quick Status Reg1 *****/ +/***** PHY_NAT_10B_OP 16 bit r/o 10Base-T Operations Reg *****/ +/***** PHY_NAT_EXT_CTRL2 16 bit r/o Extended Control Reg1 *****/ +/***** PHY_NAT_Q_STAT2 16 bit r/o Quick Status Reg2 *****/ +/***** PHY_NAT_PHY_ADDR 16 bit r/o PHY Address Register *****/ + +/* + * Marvell-Specific + */ +/***** PHY_MARV_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement *****/ +/***** PHY_MARV_AUNE_LP 16 bit r/w Link Part Ability Reg *****/ +#define PHY_M_AN_NXT_PG BIT_15 /* Request Next Page */ +#define PHY_M_AN_ACK BIT_14 /* (ro) Acknowledge Received */ +#define PHY_M_AN_RF BIT_13 /* Remote Fault */ + /* Bit 12: reserved */ +#define PHY_M_AN_ASP BIT_11 /* Asymmetric Pause */ +#define PHY_M_AN_PC BIT_10 /* MAC Pause implemented */ +#define PHY_M_AN_100_FD BIT_8 /* Advertise 100Base-TX Full Duplex */ +#define PHY_M_AN_100_HD BIT_7 /* Advertise 100Base-TX Half Duplex */ +#define PHY_M_AN_10_FD BIT_6 /* Advertise 10Base-TX Full Duplex */ +#define PHY_M_AN_10_HD BIT_5 /* Advertise 10Base-TX Half Duplex */ + +/* special defines for FIBER (88E1011S only) */ +#define PHY_M_AN_ASP_X BIT_8 /* Asymmetric Pause */ +#define PHY_M_AN_PC_X BIT_7 /* MAC Pause implemented */ +#define PHY_M_AN_1000X_AHD BIT_6 /* Advertise 10000Base-X Half Duplex */ +#define PHY_M_AN_1000X_AFD BIT_5 /* Advertise 10000Base-X Full Duplex */ + +/* Pause Bits (PHY_M_AN_ASP_X and PHY_M_AN_PC_X) encoding */ +#define PHY_M_P_NO_PAUSE_X (0<<7) /* Bit 8.. 7: no Pause Mode */ +#define PHY_M_P_SYM_MD_X (1<<7) /* Bit 8.. 7: symmetric Pause Mode */ +#define PHY_M_P_ASYM_MD_X (2<<7) /* Bit 8.. 7: asymmetric Pause Mode */ +#define PHY_M_P_BOTH_MD_X (3<<7) /* Bit 8.. 7: both Pause Mode */ + +/***** PHY_MARV_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ +#define PHY_M_1000C_TEST (7<<13) /* Bit 15..13: Test Modes */ +#define PHY_M_1000C_MSE (1<<12) /* Bit 12: Manual Master/Slave Enable */ +#define PHY_M_1000C_MSC (1<<11) /* Bit 11: M/S Configuration (1=Master) */ +#define PHY_M_1000C_MPD (1<<10) /* Bit 10: Multi-Port Device */ +#define PHY_M_1000C_AFD (1<<9) /* Bit 9: Advertise Full Duplex */ +#define PHY_M_1000C_AHD (1<<8) /* Bit 8: Advertise Half Duplex */ + /* Bit 7..0: reserved */ + +/***** PHY_MARV_PHY_CTRL 16 bit r/w PHY Specific Ctrl Reg *****/ + +#define PHY_M_PC_TX_FFD_MSK (3<<14) /* Bit 15..14: Tx FIFO Depth Mask */ +#define PHY_M_PC_RX_FFD_MSK (3<<12) /* Bit 13..12: Rx FIFO Depth Mask */ +#define PHY_M_PC_ASS_CRS_TX (1<<11) /* Bit 11: Assert CRS on Transmit */ +#define PHY_M_PC_FL_GOOD (1<<10) /* Bit 10: Force Link Good */ +#define PHY_M_PC_EN_DET_MSK (3<<8) /* Bit 9.. 8: Energy Detect Mask */ +#define PHY_M_PC_ENA_EXT_D (1<<7) /* Bit 7: Enable Ext. Distance (10BT) */ +#define PHY_M_PC_MDIX_MSK (3<<5) /* Bit 6.. 5: MDI/MDIX Config. Mask */ +#define PHY_M_PC_DIS_125CLK (1<<4) /* Bit 4: Disable 125 CLK */ +#define PHY_M_PC_MAC_POW_UP (1<<3) /* Bit 3: MAC Power up */ +#define PHY_M_PC_SQE_T_ENA (1<<2) /* Bit 2: SQE Test Enabled */ +#define PHY_M_PC_POL_R_DIS (1<<1) /* Bit 1: Polarity Reversal Disabled */ +#define PHY_M_PC_DIS_JABBER (1<<0) /* Bit 0: Disable Jabber */ + +#define PHY_M_PC_MDI_XMODE(x) SHIFT5(x) +#define PHY_M_PC_MAN_MDI 0 /* 00 = Manual MDI configuration */ +#define PHY_M_PC_MAN_MDIX 1 /* 01 = Manual MDIX configuration */ +#define PHY_M_PC_ENA_AUTO 3 /* 11 = Enable Automatic Crossover */ + +/***** PHY_MARV_PHY_STAT 16 bit r/o PHY Specific Status Reg *****/ +#define PHY_M_PS_SPEED_MSK (3<<14) /* Bit 15..14: Speed Mask */ +#define PHY_M_PS_SPEED_1000 (1<<15) /* 10 = 1000 Mbps */ +#define PHY_M_PS_SPEED_100 (1<<14) /* 01 = 100 Mbps */ +#define PHY_M_PS_SPEED_10 0 /* 00 = 10 Mbps */ +#define PHY_M_PS_FULL_DUP (1<<13) /* Bit 13: Full Duplex */ +#define PHY_M_PS_PAGE_REC (1<<12) /* Bit 12: Page Received */ +#define PHY_M_PS_SPDUP_RES (1<<11) /* Bit 11: Speed & Duplex Resolved */ +#define PHY_M_PS_LINK_UP (1<<10) /* Bit 10: Link Up */ +#define PHY_M_PS_CABLE_MSK (3<<7) /* Bit 9.. 7: Cable Length Mask */ +#define PHY_M_PS_MDI_X_STAT (1<<6) /* Bit 6: MDI Crossover Stat (1=MDIX) */ +#define PHY_M_PS_DOWNS_STAT (1<<5) /* Bit 5: Downshift Status (1=downsh.) */ +#define PHY_M_PS_ENDET_STAT (1<<4) /* Bit 4: Energy Detect Status (1=act) */ +#define PHY_M_PS_TX_P_EN (1<<3) /* Bit 3: Tx Pause Enabled */ +#define PHY_M_PS_RX_P_EN (1<<2) /* Bit 2: Rx Pause Enabled */ +#define PHY_M_PS_POL_REV (1<<1) /* Bit 1: Polarity Reversed */ +#define PHY_M_PC_JABBER (1<<0) /* Bit 0: Jabber */ + +#define PHY_M_PS_PAUSE_MSK (PHY_M_PS_TX_P_EN | PHY_M_PS_RX_P_EN) + +/***** PHY_MARV_INT_MASK 16 bit r/w Interrupt Mask Reg *****/ +/***** PHY_MARV_INT_STAT 16 bit r/o Interrupt Status Reg *****/ +#define PHY_M_IS_AN_ERROR (1<<15) /* Bit 15: Auto-Negotiation Error */ +#define PHY_M_IS_LSP_CHANGE (1<<14) /* Bit 14: Link Speed Changed */ +#define PHY_M_IS_DUP_CHANGE (1<<13) /* Bit 13: Duplex Mode Changed */ +#define PHY_M_IS_AN_PR (1<<12) /* Bit 12: Page Received */ +#define PHY_M_IS_AN_COMPL (1<<11) /* Bit 11: Auto-Negotiation Completed */ +#define PHY_M_IS_LST_CHANGE (1<<10) /* Bit 10: Link Status Changed */ +#define PHY_M_IS_SYMB_ERROR (1<<9) /* Bit 9: Symbol Error */ +#define PHY_M_IS_FALSE_CARR (1<<8) /* Bit 8: False Carrier */ +#define PHY_M_IS_FIFO_ERROR (1<<7) /* Bit 7: FIFO Overflow/Underrun Error */ +#define PHY_M_IS_MDI_CHANGE (1<<6) /* Bit 6: MDI Crossover Changed */ +#define PHY_M_IS_DOWNSH_DET (1<<5) /* Bit 5: Downshift Detected */ +#define PHY_M_IS_END_CHANGE (1<<4) /* Bit 4: Energy Detect Changed */ + /* Bit 3..2: reserved */ +#define PHY_M_IS_POL_CHANGE (1<<1) /* Bit 1: Polarity Changed */ +#define PHY_M_IS_JABBER (1<<0) /* Bit 0: Jabber */ + +#define PHY_M_DEF_MSK (PHY_M_IS_AN_ERROR | PHY_M_IS_AN_PR | \ + PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR) + +/***** PHY_MARV_EXT_CTRL 16 bit r/w Ext. PHY Specific Ctrl *****/ +#define PHY_M_EC_M_DSC_MSK (3<<10) /* Bit 11..10: Master downshift counter */ +#define PHY_M_EC_S_DSC_MSK (3<<8) /* Bit 9.. 8: Slave downshift counter */ +#define PHY_M_EC_MAC_S_MSK (7<<4) /* Bit 6.. 4: Def. MAC interface speed */ + +#define PHY_M_EC_M_DSC(x) SHIFT10(x) /* 00=1x; 01=2x; 10=3x; 11=4x */ +#define PHY_M_EC_S_DSC(x) SHIFT8(x) /* 00=dis; 01=1x; 10=2x; 11=3x */ +#define PHY_M_EC_MAC_S(x) SHIFT4(x) /* 01X=0; 110=2.5; 111=25 (MHz) */ + +#define MAC_TX_CLK_0_MHZ 2 +#define MAC_TX_CLK_2_5_MHZ 6 +#define MAC_TX_CLK_25_MHZ 7 + +/***** PHY_MARV_LED_CTRL 16 bit r/w LED Control Reg *****/ +#define PHY_M_LEDC_DIS_LED (1<<15) /* Bit 15: Disable LED */ +#define PHY_M_LEDC_PULS_MSK (7<<12) /* Bit 14..12: Pulse Stretch Mask */ +#define PHY_M_LEDC_F_INT (1<<11) /* Bit 11: Force Interrupt */ +#define PHY_M_LEDC_BL_R_MSK (7<<8) /* Bit 10.. 8: Blink Rate Mask */ + /* Bit 7.. 5: reserved */ +#define PHY_M_LEDC_LINK_MSK (3<<3) /* Bit 4.. 3: Link Control Mask */ +#define PHY_M_LEDC_DP_CTRL (1<<2) /* Bit 2: Duplex Control */ +#define PHY_M_LEDC_RX_CTRL (1<<1) /* Bit 1: Rx activity / Link */ +#define PHY_M_LEDC_TX_CTRL (1<<0) /* Bit 0: Tx activity / Link */ + +#define PHY_M_LED_PULS_DUR(x) SHIFT12(x) /* Pulse Stretch Duration */ + +#define PULS_NO_STR 0 /* no pulse stretching */ +#define PULS_21MS 1 /* 21 ms to 42 ms */ +#define PULS_42MS 2 /* 42 ms to 84 ms */ +#define PULS_84MS 3 /* 84 ms to 170 ms */ +#define PULS_170MS 4 /* 170 ms to 340 ms */ +#define PULS_340MS 5 /* 340 ms to 670 ms */ +#define PULS_670MS 6 /* 670 ms to 1.3 s */ +#define PULS_1300MS 7 /* 1.3 s to 2.7 s */ + +#define PHY_M_LED_BLINK_RT(x) SHIFT8(x) /* Blink Rate */ + +#define BLINK_42MS 0 /* 42 ms */ +#define BLINK_84MS 1 /* 84 ms */ +#define BLINK_170MS 2 /* 170 ms */ +#define BLINK_340MS 3 /* 340 ms */ +#define BLINK_670MS 4 /* 670 ms */ + /* values 5 - 7: reserved */ + +/***** PHY_MARV_LED_OVER 16 bit r/w Manual LED Override Reg *****/ +#define PHY_M_LED_MO_DUP(x) SHIFT10(x) /* Bit 11..10: Duplex */ +#define PHY_M_LED_MO_10(x) SHIFT8(x) /* Bit 9.. 8: Link 10 */ +#define PHY_M_LED_MO_100(x) SHIFT6(x) /* Bit 7.. 6: Link 100 */ +#define PHY_M_LED_MO_1000(x) SHIFT4(x) /* Bit 5.. 4: Link 1000 */ +#define PHY_M_LED_MO_RX(x) SHIFT2(x) /* Bit 3.. 2: Rx */ +#define PHY_M_LED_MO_TX(x) SHIFT0(x) /* Bit 1.. 0: Tx */ + +#define MO_LED_NORM 0 +#define MO_LED_BLINK 1 +#define MO_LED_OFF 2 +#define MO_LED_ON 3 + +/***** PHY_MARV_EXT_CTRL_2 16 bit r/w Ext. PHY Specific Ctrl 2 *****/ + /* Bit 15.. 7: reserved */ +#define PHY_M_EC2_FI_IMPED (1<<6) /* Bit 6: Fiber Input Impedance */ +#define PHY_M_EC2_FO_IMPED (1<<5) /* Bit 5: Fiber Output Impedance */ +#define PHY_M_EC2_FO_M_CLK (1<<4) /* Bit 4: Fiber Mode Clock Enable */ +#define PHY_M_EC2_FO_BOOST (1<<3) /* Bit 3: Fiber Output Boost */ +#define PHY_M_EC2_FO_AM_MSK 7 /* Bit 2.. 0: Fiber Output Amplitude */ + +/***** PHY_MARV_CABLE_DIAG 16 bit r/o Cable Diagnostic Reg *****/ +#define PHY_M_CABD_ENA_TEST (1<<15) /* Bit 15: Enable Test */ +#define PHY_M_CABD_STAT_MSK (3<<13) /* Bit 14..13: Status */ + /* Bit 12.. 8: reserved */ +#define PHY_M_CABD_DIST_MSK 0xff /* Bit 7.. 0: Distance */ + +/* values for Cable Diagnostic Status (11=fail; 00=OK; 10=open; 01=short) */ +#define CABD_STAT_NORMAL 0 +#define CABD_STAT_SHORT 1 +#define CABD_STAT_OPEN 2 +#define CABD_STAT_FAIL 3 + + +/* + * GMAC registers + * + * The GMAC registers are 16 or 32 bits wide. + * The GMACs host processor interface is 16 bits wide, + * therefore ALL registers will be addressed with 16 bit accesses. + * + * The following macros are provided to access the GMAC registers + * GM_IN16(), GM_OUT16, GM_IN32(), GM_OUT32(), GM_INADR(), GM_OUTADR(), + * GM_INHASH(), and GM_OUTHASH(). + * The macros are defined in SkGeHw.h. + * + * Note: NA reg = Network Address e.g DA, SA etc. + * + */ + +/* Port Registers */ +#define GM_GP_STAT 0x0000 /* 16 bit r/o General Purpose Status */ +#define GM_GP_CTRL 0x0004 /* 16 bit r/w General Purpose Control */ +#define GM_TX_CTRL 0x0008 /* 16 bit r/w Transmit Control Reg. */ +#define GM_RX_CTRL 0x000c /* 16 bit r/w Receive Control Reg. */ +#define GM_TX_FLOW_CTRL 0x0010 /* 16 bit r/w Transmit Flow Control */ +#define GM_TX_PARAM 0x0014 /* 16 bit r/w Transmit Parameter Reg. */ +#define GM_SERIAL_MODE 0x0018 /* 16 bit r/w Serial Mode Register */ + +/* Source Address Registers */ +#define GM_SRC_ADDR_1L 0x001c /* 16 bit r/w Source Address 1 (low) */ +#define GM_SRC_ADDR_1M 0x0020 /* 16 bit r/w Source Address 1 (middle) */ +#define GM_SRC_ADDR_1H 0x0024 /* 16 bit r/w Source Address 1 (high) */ +#define GM_SRC_ADDR_2L 0x0028 /* 16 bit r/w Source Address 2 (low) */ +#define GM_SRC_ADDR_2M 0x002c /* 16 bit r/w Source Address 2 (middle) */ +#define GM_SRC_ADDR_2H 0x0030 /* 16 bit r/w Source Address 2 (high) */ + +/* Multicast Address Hash Registers */ +#define GM_MC_ADDR_H1 0x0034 /* 16 bit r/w Multicast Address Hash 1 */ +#define GM_MC_ADDR_H2 0x0038 /* 16 bit r/w Multicast Address Hash 2 */ +#define GM_MC_ADDR_H3 0x003c /* 16 bit r/w Multicast Address Hash 3 */ +#define GM_MC_ADDR_H4 0x0040 /* 16 bit r/w Multicast Address Hash 4 */ + +/* Interrupt Source Registers */ +#define GM_TX_IRQ_SRC 0x0044 /* 16 bit r/o Tx Overflow IRQ Source */ +#define GM_RX_IRQ_SRC 0x0048 /* 16 bit r/o Rx Overflow IRQ Source */ +#define GM_TR_IRQ_SRC 0x004c /* 16 bit r/o Tx/Rx Over. IRQ Source */ + +/* Interrupt Mask Registers */ +#define GM_TX_IRQ_MSK 0x0050 /* 16 bit r/w Tx Overflow IRQ Mask */ +#define GM_RX_IRQ_MSK 0x0054 /* 16 bit r/w Rx Overflow IRQ Mask */ +#define GM_TR_IRQ_MSK 0x0058 /* 16 bit r/w Tx/Rx Over. IRQ Mask */ + +/* Serial Management Interface (SMI) Registers */ +#define GM_SMI_CTRL 0x0080 /* 16 bit r/w SMI Control Register */ +#define GM_SMI_DATA 0x0084 /* 16 bit r/w SMI Data Register */ +#define GM_PHY_ADDR 0x0088 /* 16 bit r/w GPHY Address Register */ + +/* MIB Counters */ +#define GM_MIB_CNT_BASE 0x0100 /* Base Address of MIB Counters */ +#define GM_MIB_CNT_SIZE 44 /* Number of MIB Counters */ + +/* + * MIB Counters base address definitions (low word) - + * use offset 4 for access to high word (32 bit r/o) + */ +#define GM_RXF_UC_OK \ + (GM_MIB_CNT_BASE + 0) /* Unicast Frames Received OK */ +#define GM_RXF_BC_OK \ + (GM_MIB_CNT_BASE + 8) /* Broadcast Frames Received OK */ +#define GM_RXF_MPAUSE \ + (GM_MIB_CNT_BASE + 16) /* Pause MAC Ctrl Frames Received */ +#define GM_RXF_MC_OK \ + (GM_MIB_CNT_BASE + 24) /* Multicast Frames Received OK */ +#define GM_RXF_FCS_ERR \ + (GM_MIB_CNT_BASE + 32) /* Rx Frame Check Seq. Error */ + /* GM_MIB_CNT_BASE + 40: reserved */ +#define GM_RXO_OK_LO \ + (GM_MIB_CNT_BASE + 48) /* Octets Received OK Low */ +#define GM_RXO_OK_HI \ + (GM_MIB_CNT_BASE + 56) /* Octets Received OK High */ +#define GM_RXO_ERR_LO \ + (GM_MIB_CNT_BASE + 64) /* Octets Received Invalid Low */ +#define GM_RXO_ERR_HI \ + (GM_MIB_CNT_BASE + 72) /* Octets Received Invalid High */ +#define GM_RXF_SHT \ + (GM_MIB_CNT_BASE + 80) /* Frames <64 Byte Received OK */ +#define GM_RXE_FRAG \ + (GM_MIB_CNT_BASE + 88) /* Frames <64 Byte Receeived with FCS Err */ +#define GM_RXF_64B \ + (GM_MIB_CNT_BASE + 96) /* 64 Byte Rx Frame */ +#define GM_RXF_127B \ + (GM_MIB_CNT_BASE + 104) /* 65-127 Byte Rx Frame */ +#define GM_RXF_255B \ + (GM_MIB_CNT_BASE + 112) /* 128-255 Byte Rx Frame */ +#define GM_RXF_511B \ + (GM_MIB_CNT_BASE + 120) /* 256-511 Byte Rx Frame */ +#define GM_RXF_1023B \ + (GM_MIB_CNT_BASE + 128) /* 512-1023 Byte Rx Frame */ +#define GM_RXF_1518B \ + (GM_MIB_CNT_BASE + 136) /* 1024-1518 Byte Rx Frame */ +#define GM_RXF_MAX_SZ \ + (GM_MIB_CNT_BASE + 144) /* 1519-MaxSize Byte Rx Frame */ +#define GM_RXF_LNG_ERR \ + (GM_MIB_CNT_BASE + 152) /* Rx Frame too Long Error */ +#define GM_RXF_JAB_PKT \ + (GM_MIB_CNT_BASE + 160) /* Rx Jabber Packet Frame */ + /* GM_MIB_CNT_BASE + 168: reserved */ +#define GM_RXE_FIFO_OV \ + (GM_MIB_CNT_BASE + 176) /* Rx FIFO overflow Event */ + /* GM_MIB_CNT_BASE + 184: reserved */ +#define GM_TXF_UC_OK \ + (GM_MIB_CNT_BASE + 192) /* Unicast Frames Xmitted OK */ +#define GM_TXF_BC_OK \ + (GM_MIB_CNT_BASE + 200) /* Broadcast Frames Xmitted OK */ +#define GM_TXF_MPAUSE \ + (GM_MIB_CNT_BASE + 208) /* Pause MAC Ctrl Frames Xmitted */ +#define GM_TXF_MC_OK \ + (GM_MIB_CNT_BASE + 216) /* Multicast Frames Xmitted OK */ +#define GM_TXO_OK_LO \ + (GM_MIB_CNT_BASE + 224) /* Octets Transmitted OK Low */ +#define GM_TXO_OK_HI \ + (GM_MIB_CNT_BASE + 232) /* Octets Transmitted OK High */ +#define GM_TXF_64B \ + (GM_MIB_CNT_BASE + 240) /* 64 Byte Tx Frame */ +#define GM_TXF_127B \ + (GM_MIB_CNT_BASE + 248) /* 65-127 Byte Tx Frame */ +#define GM_TXF_255B \ + (GM_MIB_CNT_BASE + 256) /* 128-255 Byte Tx Frame */ +#define GM_TXF_511B \ + (GM_MIB_CNT_BASE + 264) /* 256-511 Byte Tx Frame */ +#define GM_TXF_1023B \ + (GM_MIB_CNT_BASE + 272) /* 512-1023 Byte Tx Frame */ +#define GM_TXF_1518B \ + (GM_MIB_CNT_BASE + 280) /* 1024-1518 Byte Tx Frame */ +#define GM_TXF_MAX_SZ \ + (GM_MIB_CNT_BASE + 288) /* 1519-MaxSize Byte Tx Frame */ + /* GM_MIB_CNT_BASE + 296: reserved */ +#define GM_TXF_COL \ + (GM_MIB_CNT_BASE + 304) /* Tx Collision */ +#define GM_TXF_LAT_COL \ + (GM_MIB_CNT_BASE + 312) /* Tx Late Collision */ +#define GM_TXF_ABO_COL \ + (GM_MIB_CNT_BASE + 320) /* Tx aborted due to Exces. Col. */ +#define GM_TXF_MUL_COL \ + (GM_MIB_CNT_BASE + 328) /* Tx Multiple Collision */ +#define GM_TXF_SNG_COL \ + (GM_MIB_CNT_BASE + 336) /* Tx Single Collision */ +#define GM_TXE_FIFO_UR \ + (GM_MIB_CNT_BASE + 344) /* Tx FIFO Underrun Event */ + +/*----------------------------------------------------------------------------*/ +/* + * GMAC Bit Definitions + * + * If the bit access behaviour differs from the register access behaviour + * (r/w, r/o) this is documented after the bit number. + * The following bit access behaviours are used: + * (sc) self clearing + * (r/o) read only + */ + +/* GM_GP_STAT 16 bit r/o General Purpose Status Register */ + +#define GM_GPSR_SPEED (1<<15) /* Bit 15: Port Speed (1 = 100 Mbps) */ +#define GM_GPSR_DUPLEX (1<<14) /* Bit 14: Duplex Mode (1 = Full) */ +#define GM_GPSR_FC_TX_DIS (1<<13) /* Bit 13: Tx Flow Control Mode Disabled */ +#define GM_GPSR_LINK_UP (1<<12) /* Bit 12: Link Up Status */ +#define GM_GPSR_PAUSE (1<<11) /* Bit 11: Pause State */ +#define GM_GPSR_TX_ACTIVE (1<<10) /* Bit 10: Tx in Progress */ +#define GM_GPSR_EXC_COL (1<<9) /* Bit 9: Excessive Collisions Occured */ +#define GM_GPSR_LAT_COL (1<<8) /* Bit 8: Late Collisions Occured */ + /* Bit 7..6: reserved */ +#define GM_GPSR_PHY_ST_CH (1<<5) /* Bit 5: PHY Status Change */ +#define GM_GPSR_GIG_SPEED (1<<4) /* Bit 4: Gigabit Speed (1 = 1000 Mbps) */ +#define GM_GPSR_PART_MODE (1<<3) /* Bit 3: Partition mode */ +#define GM_GPSR_FC_RX_DIS (1<<2) /* Bit 2: Rx Flow Control Mode Disabled */ +#define GM_GPSR_PROM_EN (1<<1) /* Bit 1: Promiscuous Mode Enabled */ + /* Bit 0: reserved */ + +/* GM_GP_CTRL 16 bit r/w General Purpose Control Register */ + /* Bit 15: reserved */ +#define GM_GPCR_PROM_ENA (1<<14) /* Bit 14: Enable Promiscuous Mode */ +#define GM_GPCR_FC_TX_DIS (1<<13) /* Bit 13: Disable Tx Flow Control Mode */ +#define GM_GPCR_TX_ENA (1<<12) /* Bit 12: Enable Transmit */ +#define GM_GPCR_RX_ENA (1<<11) /* Bit 11: Enable Receive */ +#define GM_GPCR_BURST_ENA (1<<10) /* Bit 10: Enable Burst Mode */ +#define GM_GPCR_LOOP_ENA (1<<9) /* Bit 9: Enable MAC Loopback Mode */ +#define GM_GPCR_PART_ENA (1<<8) /* Bit 8: Enable Partition Mode */ +#define GM_GPCR_GIGS_ENA (1<<7) /* Bit 7: Gigabit Speed (1000 Mbps) */ +#define GM_GPCR_FL_PASS (1<<6) /* Bit 6: Force Link Pass */ +#define GM_GPCR_DUP_FULL (1<<5) /* Bit 5: Full Duplex Mode */ +#define GM_GPCR_FC_RX_DIS (1<<4) /* Bit 4: Disable Rx Flow Control Mode */ +#define GM_GPCR_SPEED_100 (1<<3) /* Bit 3: Port Speed 100 Mbps */ +#define GM_GPCR_AU_DUP_DIS (1<<2) /* Bit 2: Disable Auto-Update for Duplex */ +#define GM_GPCR_AU_FCT_DIS (1<<1) /* Bit 1: Disable Auto-Update for Flow-c. */ +#define GM_GPCR_AU_SPD_DIS (1<<0) /* Bit 0: Disable Auto-Update for Speed */ + +#define GM_GPCR_SPEED_1000 (GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100) +#define GM_GPCR_AU_ALL_DIS (GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS |\ + GM_GPCR_AU_SPD_DIS) + +/* GM_TX_CTRL 16 bit r/w Transmit Control Register */ + +#define GM_TXCR_FORCE_JAM (1<<15) /* Bit 15: Force Jam / Flow-Control */ +#define GM_TXCR_CRC_DIS (1<<14) /* Bit 14: Disable insertion of CRC */ +#define GM_TXCR_PAD_DIS (1<<13) /* Bit 13: Disable padding of packets */ +#define GM_TXCR_COL_THR (4<<10) /* Bit 12..10: Collision Threshold */ + +/* GM_RX_CTRL 16 bit r/w Receive Control Register */ +#define GM_RXCR_UCF_ENA (1<<15) /* Bit 15: Enable Unicast filtering */ +#define GM_RXCR_MCF_ENA (1<<14) /* Bit 14: Enable Multicast filtering */ +#define GM_RXCR_CRC_DIS (1<<13) /* Bit 13: Remove 4-byte CRC */ +#define GM_RXCR_PASS_FC (1<<12) /* Bit 12: Pass FC packets to FIFO */ + +/* GM_TX_PARAM 16 bit r/w Transmit Parameter Register */ +#define GM_TXPA_JAMLEN_MSK (0x03<<14) /* Bit 15..14: Jam Length */ +#define GM_TXPA_JAMIPG_MSK (0x1f<<9) /* Bit 13..9: Jam IPG */ +#define GM_TXPA_JAMDAT_MSK (0x1f<<4) /* Bit 8..4: IPG Jam to Data */ + /* Bit 3..0: reserved */ +#define JAM_LEN_VAL(x) SHIFT14(x) +#define JAM_IPG_VAL(x) SHIFT9(x) +#define IPG_JAM_DATA(x) SHIFT4(x) + +/* GM_SERIAL_MODE 16 bit r/w Serial Mode Register */ +#define GM_SMOD_DATABL_MSK (0x1f<<11) /* Bit 15..11: Data Blinder */ +#define GM_SMOD_LIMIT_4 (1<<10) /* Bit 10: 4 consecutive transmit trials */ +#define GM_SMOD_VLAN_ENA (1<<9) /* Bit 9: Enable VLAN (Max. Frame Length) */ +#define GM_SMOD_JUMBO_ENA (1<<8) /* Bit 8: Enable Jumbo (Max. Frame Length) */ + /* Bit 7..5: reserved */ +#define GM_SMOD_IPG_MSK 0x1f /* Bit 4..0: Inter-Packet Gap (IPG) */ + +#define DATA_BLIND_VAL(x) SHIFT11(x) +#define DATA_BLIND_FAST_ETH 0x1c +#define DATA_BLIND_GIGABIT 4 + +#define IPG_VAL_FAST_ETH 0x1e +#define IPG_VAL_GIGABIT 6 + +/* GM_SMI_CTRL 16 bit r/w SMI Control Register */ + +#define GM_SMI_CT_PHY_AD(x) SHIFT11(x) +#define GM_SMI_CT_REG_AD(x) SHIFT6(x) +#define GM_SMI_CT_OP_RD (1<<5) /* Bit 5: OpCode Read (0=Write)*/ +#define GM_SMI_CT_RD_VAL (1<<4) /* Bit 4: Read Valid (Read completed) */ +#define GM_SMI_CT_BUSY (1<<3) /* Bit 3: Busy (Operation in progress) */ + /* Bit 2..0: reserved */ + +/* GM_PHY_ADDR 16 bit r/w GPHY Address Register */ + /* Bit 15..6: reserved */ +#define GM_PAR_MIB_CLR (1<<5) /* Bit 5: Set MIB Clear Counter Mode */ +#define GM_PAR_MIB_TST (1<<4) /* Bit 4: MIB Load Counter (Test Mode) */ + /* Bit 3..0: reserved */ + +/* Receive Frame Status Encoding */ +#define GMR_FS_LEN (0xffffUL<<16) /* Bit 31..16: Rx Frame Length */ + /* Bit 15..14: reserved */ +#define GMR_FS_VLAN (1L<<13) /* Bit 13: VLAN Packet */ +#define GMR_FS_JABBER (1L<<12) /* Bit 12: Jabber Packet */ +#define GMR_FS_UN_SIZE (1L<<11) /* Bit 11: Undersize Packet */ +#define GMR_FS_MC (1L<<10) /* Bit 10: Multicast Packet */ +#define GMR_FS_BC (1L<<9) /* Bit 9: Broadcast Packet */ +#define GMR_FS_RX_OK (1L<<8) /* Bit 8: Receive OK (Good Packet) */ +#define GMR_FS_GOOD_FC (1L<<7) /* Bit 7: Good Flow-Control Packet */ +#define GMR_FS_BAD_FC (1L<<6) /* Bit 6: Bad Flow-Control Packet */ +#define GMR_FS_MII_ERR (1L<<5) /* Bit 5: MII Error */ +#define GMR_FS_LONG_ERR (1L<<4) /* Bit 4: Too Long Packet */ +#define GMR_FS_FRAGMENT (1L<<3) /* Bit 3: Fragment */ + /* Bit 2: reserved */ +#define GMR_FS_CRC_ERR (1L<<1) /* Bit 1: CRC Error */ +#define GMR_FS_RX_FF_OV (1L<<0) /* Bit 0: Rx FIFO Overflow */ + +/* + * GMR_FS_ANY_ERR (analogous to XMR_FS_ANY_ERR) + */ +#define GMR_FS_ANY_ERR (GMR_FS_CRC_ERR | \ + GMR_FS_LONG_ERR | \ + GMR_FS_MII_ERR | \ + GMR_FS_BAD_FC | \ + GMR_FS_GOOD_FC | \ + GMR_FS_JABBER) + +/* Rx GMAC FIFO Flush Mask (default) */ +#define RX_FF_FL_DEF_MSK (GMR_FS_CRC_ERR | \ + GMR_FS_RX_FF_OV | \ + GMR_FS_MII_ERR | \ + GMR_FS_BAD_FC | \ + GMR_FS_GOOD_FC | \ + GMR_FS_UN_SIZE | \ + GMR_FS_JABBER) + +/* typedefs *******************************************************************/ + + +/* function prototypes ********************************************************/ + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* __INC_XMAC_H */ |