summaryrefslogtreecommitdiff
path: root/drivers/net/sk98lin/skcsum.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/sk98lin/skcsum.c')
-rw-r--r--drivers/net/sk98lin/skcsum.c925
1 files changed, 0 insertions, 925 deletions
diff --git a/drivers/net/sk98lin/skcsum.c b/drivers/net/sk98lin/skcsum.c
deleted file mode 100644
index 162b67df0e..0000000000
--- a/drivers/net/sk98lin/skcsum.c
+++ /dev/null
@@ -1,925 +0,0 @@
-/******************************************************************************
- *
- * Name: skcsum.c
- * Project: GEnesis, PCI Gigabit Ethernet Adapter
- * Version: $Revision: 1.10 $
- * Date: $Date: 2002/04/11 10:02:04 $
- * Purpose: Store/verify Internet checksum in send/receive packets.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * (C)Copyright 1998-2001 SysKonnect GmbH.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-/******************************************************************************
- *
- * History:
- *
- * $Log: skcsum.c,v $
- * Revision 1.10 2002/04/11 10:02:04 rwahl
- * Fix in SkCsGetSendInfo():
- * - function did not return ProtocolFlags in every case.
- * - pseudo header csum calculated wrong for big endian.
- *
- * Revision 1.9 2001/06/13 07:42:08 gklug
- * fix: NetNumber was wrong in CLEAR_STAT event
- * add: check for good NetNumber in Clear STAT
- *
- * Revision 1.8 2001/02/06 11:15:36 rassmann
- * Supporting two nets on dual-port adapters.
- *
- * Revision 1.7 2000/06/29 13:17:05 rassmann
- * Corrected reception of a packet with UDP checksum == 0 (which means there
- * is no UDP checksum).
- *
- * Revision 1.6 2000/02/21 12:35:10 cgoos
- * Fixed license header comment.
- *
- * Revision 1.5 2000/02/21 11:05:19 cgoos
- * Merged changes back to common source.
- * Fixed rx path for BIG ENDIAN architecture.
- *
- * Revision 1.1 1999/07/26 15:28:12 mkarl
- * added return SKCS_STATUS_IP_CSUM_ERROR_UDP and
- * SKCS_STATUS_IP_CSUM_ERROR_TCP to pass the NidsTester
- * changed from common source to windows specific source
- * therefore restarting with v1.0
- *
- * Revision 1.3 1999/05/10 08:39:33 mkarl
- * prevent overflows in SKCS_HTON16
- * fixed a bug in pseudo header checksum calculation
- * added some comments
- *
- * Revision 1.2 1998/10/22 11:53:28 swolf
- * Now using SK_DBG_MSG.
- *
- * Revision 1.1 1998/09/01 15:35:41 swolf
- * initial revision
- *
- * 13-May-1998 sw Created.
- *
- ******************************************************************************/
-
-#include <config.h>
-
-#ifdef SK_USE_CSUM /* Check if CSUM is to be used. */
-
-#ifndef lint
-static const char SysKonnectFileId[] = "@(#)"
- "$Id: skcsum.c,v 1.10 2002/04/11 10:02:04 rwahl Exp $"
- " (C) SysKonnect.";
-#endif /* !lint */
-
-/******************************************************************************
- *
- * Description:
- *
- * This is the "GEnesis" common module "CSUM".
- *
- * This module contains the code necessary to calculate, store, and verify the
- * Internet Checksum of IP, TCP, and UDP frames.
- *
- * "GEnesis" is an abbreviation of "Gigabit Ethernet Network System in Silicon"
- * and is the code name of this SysKonnect project.
- *
- * Compilation Options:
- *
- * SK_USE_CSUM - Define if CSUM is to be used. Otherwise, CSUM will be an
- * empty module.
- *
- * SKCS_OVERWRITE_PROTO - Define to overwrite the default protocol id
- * definitions. In this case, all SKCS_PROTO_xxx definitions must be made
- * external.
- *
- * SKCS_OVERWRITE_STATUS - Define to overwrite the default return status
- * definitions. In this case, all SKCS_STATUS_xxx definitions must be made
- * external.
- *
- * Include File Hierarchy:
- *
- * "h/skdrv1st.h"
- * "h/skcsum.h"
- * "h/sktypes.h"
- * "h/skqueue.h"
- * "h/skdrv2nd.h"
- *
- ******************************************************************************/
-
-#include "h/skdrv1st.h"
-#include "h/skcsum.h"
-#include "h/skdrv2nd.h"
-
-/* defines ********************************************************************/
-
-/* The size of an Ethernet MAC header. */
-#define SKCS_ETHERNET_MAC_HEADER_SIZE (6+6+2)
-
-/* The size of the used topology's MAC header. */
-#define SKCS_MAC_HEADER_SIZE SKCS_ETHERNET_MAC_HEADER_SIZE
-
-/* The size of the IP header without any option fields. */
-#define SKCS_IP_HEADER_SIZE 20
-
-/*
- * Field offsets within the IP header.
- */
-
-/* "Internet Header Version" and "Length". */
-#define SKCS_OFS_IP_HEADER_VERSION_AND_LENGTH 0
-
-/* "Total Length". */
-#define SKCS_OFS_IP_TOTAL_LENGTH 2
-
-/* "Flags" "Fragment Offset". */
-#define SKCS_OFS_IP_FLAGS_AND_FRAGMENT_OFFSET 6
-
-/* "Next Level Protocol" identifier. */
-#define SKCS_OFS_IP_NEXT_LEVEL_PROTOCOL 9
-
-/* Source IP address. */
-#define SKCS_OFS_IP_SOURCE_ADDRESS 12
-
-/* Destination IP address. */
-#define SKCS_OFS_IP_DESTINATION_ADDRESS 16
-
-
-/*
- * Field offsets within the UDP header.
- */
-
-/* UDP checksum. */
-#define SKCS_OFS_UDP_CHECKSUM 6
-
-/* IP "Next Level Protocol" identifiers (see RFC 790). */
-#define SKCS_PROTO_ID_TCP 6 /* Transport Control Protocol */
-#define SKCS_PROTO_ID_UDP 17 /* User Datagram Protocol */
-
-/* IP "Don't Fragment" bit. */
-#define SKCS_IP_DONT_FRAGMENT SKCS_HTON16(0x4000)
-
-/* Add a byte offset to a pointer. */
-#define SKCS_IDX(pPtr, Ofs) ((void *) ((char *) (pPtr) + (Ofs)))
-
-/*
- * Macros that convert host to network representation and vice versa, i.e.
- * little/big endian conversion on little endian machines only.
- */
-#ifdef SK_LITTLE_ENDIAN
-#define SKCS_HTON16(Val16) (((unsigned) (Val16) >> 8) | (((Val16) & 0xFF) << 8))
-#endif /* SK_LITTLE_ENDIAN */
-#ifdef SK_BIG_ENDIAN
-#define SKCS_HTON16(Val16) (Val16)
-#endif /* SK_BIG_ENDIAN */
-#define SKCS_NTOH16(Val16) SKCS_HTON16(Val16)
-
-/* typedefs *******************************************************************/
-
-/* function prototypes ********************************************************/
-
-/******************************************************************************
- *
- * SkCsGetSendInfo - get checksum information for a send packet
- *
- * Description:
- * Get all checksum information necessary to send a TCP or UDP packet. The
- * function checks the IP header passed to it. If the high-level protocol
- * is either TCP or UDP the pseudo header checksum is calculated and
- * returned.
- *
- * The function returns the total length of the IP header (including any
- * IP option fields), which is the same as the start offset of the IP data
- * which in turn is the start offset of the TCP or UDP header.
- *
- * The function also returns the TCP or UDP pseudo header checksum, which
- * should be used as the start value for the hardware checksum calculation.
- * (Note that any actual pseudo header checksum can never calculate to
- * zero.)
- *
- * Note:
- * There is a bug in the ASIC which may lead to wrong checksums.
- *
- * Arguments:
- * pAc - A pointer to the adapter context struct.
- *
- * pIpHeader - Pointer to IP header. Must be at least the IP header *not*
- * including any option fields, i.e. at least 20 bytes.
- *
- * Note: This pointer will be used to address 8-, 16-, and 32-bit
- * variables with the respective alignment offsets relative to the pointer.
- * Thus, the pointer should point to a 32-bit aligned address. If the
- * target system cannot address 32-bit variables on non 32-bit aligned
- * addresses, then the pointer *must* point to a 32-bit aligned address.
- *
- * pPacketInfo - A pointer to the packet information structure for this
- * packet. Before calling this SkCsGetSendInfo(), the following field must
- * be initialized:
- *
- * ProtocolFlags - Initialize with any combination of
- * SKCS_PROTO_XXX bit flags. SkCsGetSendInfo() will only work on
- * the protocols specified here. Any protocol(s) not specified
- * here will be ignored.
- *
- * Note: Only one checksum can be calculated in hardware. Thus, if
- * SKCS_PROTO_IP is specified in the 'ProtocolFlags',
- * SkCsGetSendInfo() must calculate the IP header checksum in
- * software. It might be a better idea to have the calling
- * protocol stack calculate the IP header checksum.
- *
- * Returns: N/A
- * On return, the following fields in 'pPacketInfo' may or may not have
- * been filled with information, depending on the protocol(s) found in the
- * packet:
- *
- * ProtocolFlags - Returns the SKCS_PROTO_XXX bit flags of the protocol(s)
- * that were both requested by the caller and actually found in the packet.
- * Protocol(s) not specified by the caller and/or not found in the packet
- * will have their respective SKCS_PROTO_XXX bit flags reset.
- *
- * Note: For IP fragments, TCP and UDP packet information is ignored.
- *
- * IpHeaderLength - The total length in bytes of the complete IP header
- * including any option fields is returned here. This is the start offset
- * of the IP data, i.e. the TCP or UDP header if present.
- *
- * IpHeaderChecksum - If IP has been specified in the 'ProtocolFlags', the
- * 16-bit Internet Checksum of the IP header is returned here. This value
- * is to be stored into the packet's 'IP Header Checksum' field.
- *
- * PseudoHeaderChecksum - If this is a TCP or UDP packet and if TCP or UDP
- * has been specified in the 'ProtocolFlags', the 16-bit Internet Checksum
- * of the TCP or UDP pseudo header is returned here.
- */
-#if 0
-void SkCsGetSendInfo(
-SK_AC *pAc, /* Adapter context struct. */
-void *pIpHeader, /* IP header. */
-SKCS_PACKET_INFO *pPacketInfo, /* Packet information struct. */
-int NetNumber) /* Net number */
-{
- /* Internet Header Version found in IP header. */
- unsigned InternetHeaderVersion;
-
- /* Length of the IP header as found in IP header. */
- unsigned IpHeaderLength;
-
- /* Bit field specifiying the desired/found protocols. */
- unsigned ProtocolFlags;
-
- /* Next level protocol identifier found in IP header. */
- unsigned NextLevelProtocol;
-
- /* Length of IP data portion. */
- unsigned IpDataLength;
-
- /* TCP/UDP pseudo header checksum. */
- unsigned long PseudoHeaderChecksum;
-
- /* Pointer to next level protocol statistics structure. */
- SKCS_PROTO_STATS *NextLevelProtoStats;
-
- /* Temporary variable. */
- unsigned Tmp;
-
- Tmp = *(SK_U8 *)
- SKCS_IDX(pIpHeader, SKCS_OFS_IP_HEADER_VERSION_AND_LENGTH);
-
- /* Get the Internet Header Version (IHV). */
- /* Note: The IHV is stored in the upper four bits. */
-
- InternetHeaderVersion = Tmp >> 4;
-
- /* Check the Internet Header Version. */
- /* Note: We currently only support IP version 4. */
-
- if (InternetHeaderVersion != 4) { /* IPv4? */
- SK_DBG_MSG(pAc, SK_DBGMOD_CSUM, SK_DBGCAT_ERR | SK_DBGCAT_TX,
- ("Tx: Unknown Internet Header Version %u.\n",
- InternetHeaderVersion));
- pPacketInfo->ProtocolFlags = 0;
- pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_IP].TxUnableCts++;
- return;
- }
-
- /* Get the IP header length (IHL). */
- /*
- * Note: The IHL is stored in the lower four bits as the number of
- * 4-byte words.
- */
-
- IpHeaderLength = (Tmp & 0xf) * 4;
- pPacketInfo->IpHeaderLength = IpHeaderLength;
-
- /* Check the IP header length. */
-
- /* 04-Aug-1998 sw - Really check the IHL? Necessary? */
-
- if (IpHeaderLength < 5*4) {
- SK_DBG_MSG(pAc, SK_DBGMOD_CSUM, SK_DBGCAT_ERR | SK_DBGCAT_TX,
- ("Tx: Invalid IP Header Length %u.\n", IpHeaderLength));
- pPacketInfo->ProtocolFlags = 0;
- pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_IP].TxUnableCts++;
- return;
- }
-
- /* This is an IPv4 frame with a header of valid length. */
-
- pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_IP].TxOkCts++;
-
- /* Check if we should calculate the IP header checksum. */
-
- ProtocolFlags = pPacketInfo->ProtocolFlags;
-
- if (ProtocolFlags & SKCS_PROTO_IP) {
- pPacketInfo->IpHeaderChecksum =
- SkCsCalculateChecksum(pIpHeader, IpHeaderLength);
- }
-
- /* Get the next level protocol identifier. */
-
- NextLevelProtocol =
- *(SK_U8 *) SKCS_IDX(pIpHeader, SKCS_OFS_IP_NEXT_LEVEL_PROTOCOL);
-
- /*
- * Check if this is a TCP or UDP frame and if we should calculate the
- * TCP/UDP pseudo header checksum.
- *
- * Also clear all protocol bit flags of protocols not present in the
- * frame.
- */
-
- if ((ProtocolFlags & SKCS_PROTO_TCP) != 0 &&
- NextLevelProtocol == SKCS_PROTO_ID_TCP) {
- /* TCP/IP frame. */
- ProtocolFlags &= SKCS_PROTO_TCP | SKCS_PROTO_IP;
- NextLevelProtoStats =
- &pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_TCP];
- }
- else if ((ProtocolFlags & SKCS_PROTO_UDP) != 0 &&
- NextLevelProtocol == SKCS_PROTO_ID_UDP) {
- /* UDP/IP frame. */
- ProtocolFlags &= SKCS_PROTO_UDP | SKCS_PROTO_IP;
- NextLevelProtoStats =
- &pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_UDP];
- }
- else {
- /*
- * Either not a TCP or UDP frame and/or TCP/UDP processing not
- * specified.
- */
- pPacketInfo->ProtocolFlags = ProtocolFlags & SKCS_PROTO_IP;
- return;
- }
-
- /* Check if this is an IP fragment. */
-
- /*
- * Note: An IP fragment has a non-zero "Fragment Offset" field and/or
- * the "More Fragments" bit set. Thus, if both the "Fragment Offset"
- * and the "More Fragments" are zero, it is *not* a fragment. We can
- * easily check both at the same time since they are in the same 16-bit
- * word.
- */
-
- if ((*(SK_U16 *)
- SKCS_IDX(pIpHeader, SKCS_OFS_IP_FLAGS_AND_FRAGMENT_OFFSET) &
- ~SKCS_IP_DONT_FRAGMENT) != 0) {
- /* IP fragment; ignore all other protocols. */
- pPacketInfo->ProtocolFlags = ProtocolFlags & SKCS_PROTO_IP;
- NextLevelProtoStats->TxUnableCts++;
- return;
- }
-
- /*
- * Calculate the TCP/UDP pseudo header checksum.
- */
-
- /* Get total length of IP header and data. */
-
- IpDataLength =
- *(SK_U16 *) SKCS_IDX(pIpHeader, SKCS_OFS_IP_TOTAL_LENGTH);
-
- /* Get length of IP data portion. */
-
- IpDataLength = SKCS_NTOH16(IpDataLength) - IpHeaderLength;
-
- /* Calculate the sum of all pseudo header fields (16-bit). */
-
- PseudoHeaderChecksum =
- (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
- SKCS_OFS_IP_SOURCE_ADDRESS + 0) +
- (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
- SKCS_OFS_IP_SOURCE_ADDRESS + 2) +
- (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
- SKCS_OFS_IP_DESTINATION_ADDRESS + 0) +
- (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
- SKCS_OFS_IP_DESTINATION_ADDRESS + 2) +
- (unsigned long) SKCS_HTON16(NextLevelProtocol) +
- (unsigned long) SKCS_HTON16(IpDataLength);
-
- /* Add-in any carries. */
-
- SKCS_OC_ADD(PseudoHeaderChecksum, PseudoHeaderChecksum, 0);
-
- /* Add-in any new carry. */
-
- SKCS_OC_ADD(pPacketInfo->PseudoHeaderChecksum, PseudoHeaderChecksum, 0);
-
- pPacketInfo->ProtocolFlags = ProtocolFlags;
- NextLevelProtoStats->TxOkCts++; /* Success. */
-} /* SkCsGetSendInfo */
-
-
-/******************************************************************************
- *
- * SkCsGetReceiveInfo - verify checksum information for a received packet
- *
- * Description:
- * Verify a received frame's checksum. The function returns a status code
- * reflecting the result of the verification.
- *
- * Note:
- * Before calling this function you have to verify that the frame is
- * not padded and Checksum1 and Checksum2 are bigger than 1.
- *
- * Arguments:
- * pAc - Pointer to adapter context struct.
- *
- * pIpHeader - Pointer to IP header. Must be at least the length in bytes
- * of the received IP header including any option fields. For UDP packets,
- * 8 additional bytes are needed to access the UDP checksum.
- *
- * Note: The actual length of the IP header is stored in the lower four
- * bits of the first octet of the IP header as the number of 4-byte words,
- * so it must be multiplied by four to get the length in bytes. Thus, the
- * maximum IP header length is 15 * 4 = 60 bytes.
- *
- * Checksum1 - The first 16-bit Internet Checksum calculated by the
- * hardware starting at the offset returned by SkCsSetReceiveFlags().
- *
- * Checksum2 - The second 16-bit Internet Checksum calculated by the
- * hardware starting at the offset returned by SkCsSetReceiveFlags().
- *
- * Returns:
- * SKCS_STATUS_UNKNOWN_IP_VERSION - Not an IP v4 frame.
- * SKCS_STATUS_IP_CSUM_ERROR - IP checksum error.
- * SKCS_STATUS_IP_CSUM_ERROR_TCP - IP checksum error in TCP frame.
- * SKCS_STATUS_IP_CSUM_ERROR_UDP - IP checksum error in UDP frame
- * SKCS_STATUS_IP_FRAGMENT - IP fragment (IP checksum ok).
- * SKCS_STATUS_IP_CSUM_OK - IP checksum ok (not a TCP or UDP frame).
- * SKCS_STATUS_TCP_CSUM_ERROR - TCP checksum error (IP checksum ok).
- * SKCS_STATUS_UDP_CSUM_ERROR - UDP checksum error (IP checksum ok).
- * SKCS_STATUS_TCP_CSUM_OK - IP and TCP checksum ok.
- * SKCS_STATUS_UDP_CSUM_OK - IP and UDP checksum ok.
- * SKCS_STATUS_IP_CSUM_OK_NO_UDP - IP checksum OK and no UDP checksum.
- *
- * Note: If SKCS_OVERWRITE_STATUS is defined, the SKCS_STATUS_XXX values
- * returned here can be defined in some header file by the module using CSUM.
- * In this way, the calling module can assign return values for its own needs,
- * e.g. by assigning bit flags to the individual protocols.
- */
-SKCS_STATUS SkCsGetReceiveInfo(
-SK_AC *pAc, /* Adapter context struct. */
-void *pIpHeader, /* IP header. */
-unsigned Checksum1, /* Hardware checksum 1. */
-unsigned Checksum2, /* Hardware checksum 2. */
-int NetNumber) /* Net number */
-{
- /* Internet Header Version found in IP header. */
- unsigned InternetHeaderVersion;
-
- /* Length of the IP header as found in IP header. */
- unsigned IpHeaderLength;
-
- /* Length of IP data portion. */
- unsigned IpDataLength;
-
- /* IP header checksum. */
- unsigned IpHeaderChecksum;
-
- /* IP header options checksum, if any. */
- unsigned IpOptionsChecksum;
-
- /* IP data checksum, i.e. TCP/UDP checksum. */
- unsigned IpDataChecksum;
-
- /* Next level protocol identifier found in IP header. */
- unsigned NextLevelProtocol;
-
- /* The checksum of the "next level protocol", i.e. TCP or UDP. */
- unsigned long NextLevelProtocolChecksum;
-
- /* Pointer to next level protocol statistics structure. */
- SKCS_PROTO_STATS *NextLevelProtoStats;
-
- /* Temporary variable. */
- unsigned Tmp;
-
- Tmp = *(SK_U8 *)
- SKCS_IDX(pIpHeader, SKCS_OFS_IP_HEADER_VERSION_AND_LENGTH);
-
- /* Get the Internet Header Version (IHV). */
- /* Note: The IHV is stored in the upper four bits. */
-
- InternetHeaderVersion = Tmp >> 4;
-
- /* Check the Internet Header Version. */
- /* Note: We currently only support IP version 4. */
-
- if (InternetHeaderVersion != 4) { /* IPv4? */
- SK_DBG_MSG(pAc, SK_DBGMOD_CSUM, SK_DBGCAT_ERR | SK_DBGCAT_RX,
- ("Rx: Unknown Internet Header Version %u.\n",
- InternetHeaderVersion));
- pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_IP].RxUnableCts++;
- return (SKCS_STATUS_UNKNOWN_IP_VERSION);
- }
-
- /* Get the IP header length (IHL). */
- /*
- * Note: The IHL is stored in the lower four bits as the number of
- * 4-byte words.
- */
-
- IpHeaderLength = (Tmp & 0xf) * 4;
-
- /* Check the IP header length. */
-
- /* 04-Aug-1998 sw - Really check the IHL? Necessary? */
-
- if (IpHeaderLength < 5*4) {
- SK_DBG_MSG(pAc, SK_DBGMOD_CSUM, SK_DBGCAT_ERR | SK_DBGCAT_RX,
- ("Rx: Invalid IP Header Length %u.\n", IpHeaderLength));
- pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_IP].RxErrCts++;
- return (SKCS_STATUS_IP_CSUM_ERROR);
- }
-
- /* This is an IPv4 frame with a header of valid length. */
-
- /* Get the IP header and data checksum. */
-
- IpDataChecksum = Checksum2;
-
- /*
- * The IP header checksum is calculated as follows:
- *
- * IpHeaderChecksum = Checksum1 - Checksum2
- */
-
- SKCS_OC_SUB(IpHeaderChecksum, Checksum1, Checksum2);
-
- /* Check if any IP header options. */
-
- if (IpHeaderLength > SKCS_IP_HEADER_SIZE) {
-
- /* Get the IP options checksum. */
-
- IpOptionsChecksum = SkCsCalculateChecksum(
- SKCS_IDX(pIpHeader, SKCS_IP_HEADER_SIZE),
- IpHeaderLength - SKCS_IP_HEADER_SIZE);
-
- /* Adjust the IP header and IP data checksums. */
-
- SKCS_OC_ADD(IpHeaderChecksum, IpHeaderChecksum, IpOptionsChecksum);
-
- SKCS_OC_SUB(IpDataChecksum, IpDataChecksum, IpOptionsChecksum);
- }
-
- /*
- * Check if the IP header checksum is ok.
- *
- * NOTE: We must check the IP header checksum even if the caller just wants
- * us to check upper-layer checksums, because we cannot do any further
- * processing of the packet without a valid IP checksum.
- */
-
- /* Get the next level protocol identifier. */
-
- NextLevelProtocol = *(SK_U8 *)
- SKCS_IDX(pIpHeader, SKCS_OFS_IP_NEXT_LEVEL_PROTOCOL);
-
- if (IpHeaderChecksum != 0xFFFF) {
- pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_IP].RxErrCts++;
- /* the NDIS tester wants to know the upper level protocol too */
- if (NextLevelProtocol == SKCS_PROTO_ID_TCP) {
- return(SKCS_STATUS_IP_CSUM_ERROR_TCP);
- }
- else if (NextLevelProtocol == SKCS_PROTO_ID_UDP) {
- return(SKCS_STATUS_IP_CSUM_ERROR_UDP);
- }
- return (SKCS_STATUS_IP_CSUM_ERROR);
- }
-
- /*
- * Check if this is a TCP or UDP frame and if we should calculate the
- * TCP/UDP pseudo header checksum.
- *
- * Also clear all protocol bit flags of protocols not present in the
- * frame.
- */
-
- if ((pAc->Csum.ReceiveFlags[NetNumber] & SKCS_PROTO_TCP) != 0 &&
- NextLevelProtocol == SKCS_PROTO_ID_TCP) {
- /* TCP/IP frame. */
- NextLevelProtoStats =
- &pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_TCP];
- }
- else if ((pAc->Csum.ReceiveFlags[NetNumber] & SKCS_PROTO_UDP) != 0 &&
- NextLevelProtocol == SKCS_PROTO_ID_UDP) {
- /* UDP/IP frame. */
- NextLevelProtoStats =
- &pAc->Csum.ProtoStats[NetNumber][SKCS_PROTO_STATS_UDP];
- }
- else {
- /*
- * Either not a TCP or UDP frame and/or TCP/UDP processing not
- * specified.
- */
- return (SKCS_STATUS_IP_CSUM_OK);
- }
-
- /* Check if this is an IP fragment. */
-
- /*
- * Note: An IP fragment has a non-zero "Fragment Offset" field and/or
- * the "More Fragments" bit set. Thus, if both the "Fragment Offset"
- * and the "More Fragments" are zero, it is *not* a fragment. We can
- * easily check both at the same time since they are in the same 16-bit
- * word.
- */
-
- if ((*(SK_U16 *)
- SKCS_IDX(pIpHeader, SKCS_OFS_IP_FLAGS_AND_FRAGMENT_OFFSET) &
- ~SKCS_IP_DONT_FRAGMENT) != 0) {
- /* IP fragment; ignore all other protocols. */
- NextLevelProtoStats->RxUnableCts++;
- return (SKCS_STATUS_IP_FRAGMENT);
- }
-
- /*
- * 08-May-2000 ra
- *
- * From RFC 768 (UDP)
- * If the computed checksum is zero, it is transmitted as all ones (the
- * equivalent in one's complement arithmetic). An all zero transmitted
- * checksum value means that the transmitter generated no checksum (for
- * debugging or for higher level protocols that don't care).
- */
-
- if (NextLevelProtocol == SKCS_PROTO_ID_UDP &&
- *(SK_U16*)SKCS_IDX(pIpHeader, IpHeaderLength + 6) == 0x0000) {
-
- NextLevelProtoStats->RxOkCts++;
-
- return (SKCS_STATUS_IP_CSUM_OK_NO_UDP);
- }
-
- /*
- * Calculate the TCP/UDP checksum.
- */
-
- /* Get total length of IP header and data. */
-
- IpDataLength =
- *(SK_U16 *) SKCS_IDX(pIpHeader, SKCS_OFS_IP_TOTAL_LENGTH);
-
- /* Get length of IP data portion. */
-
- IpDataLength = SKCS_NTOH16(IpDataLength) - IpHeaderLength;
-
- NextLevelProtocolChecksum =
-
- /* Calculate the pseudo header checksum. */
-
- (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
- SKCS_OFS_IP_SOURCE_ADDRESS + 0) +
- (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
- SKCS_OFS_IP_SOURCE_ADDRESS + 2) +
- (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
- SKCS_OFS_IP_DESTINATION_ADDRESS + 0) +
- (unsigned long) *(SK_U16 *) SKCS_IDX(pIpHeader,
- SKCS_OFS_IP_DESTINATION_ADDRESS + 2) +
- (unsigned long) SKCS_HTON16(NextLevelProtocol) +
- (unsigned long) SKCS_HTON16(IpDataLength) +
-
- /* Add the TCP/UDP header checksum. */
-
- (unsigned long) IpDataChecksum;
-
- /* Add-in any carries. */
-
- SKCS_OC_ADD(NextLevelProtocolChecksum, NextLevelProtocolChecksum, 0);
-
- /* Add-in any new carry. */
-
- SKCS_OC_ADD(NextLevelProtocolChecksum, NextLevelProtocolChecksum, 0);
-
- /* Check if the TCP/UDP checksum is ok. */
-
- if ((unsigned) NextLevelProtocolChecksum == 0xFFFF) {
-
- /* TCP/UDP checksum ok. */
-
- NextLevelProtoStats->RxOkCts++;
-
- return (NextLevelProtocol == SKCS_PROTO_ID_TCP ?
- SKCS_STATUS_TCP_CSUM_OK : SKCS_STATUS_UDP_CSUM_OK);
- }
-
- /* TCP/UDP checksum error. */
-
- NextLevelProtoStats->RxErrCts++;
-
- return (NextLevelProtocol == SKCS_PROTO_ID_TCP ?
- SKCS_STATUS_TCP_CSUM_ERROR : SKCS_STATUS_UDP_CSUM_ERROR);
-} /* SkCsGetReceiveInfo */
-#endif
-
-
-/******************************************************************************
- *
- * SkCsSetReceiveFlags - set checksum receive flags
- *
- * Description:
- * Use this function to set the various receive flags. According to the
- * protocol flags set by the caller, the start offsets within received
- * packets of the two hardware checksums are returned. These offsets must
- * be stored in all receive descriptors.
- *
- * Arguments:
- * pAc - Pointer to adapter context struct.
- *
- * ReceiveFlags - Any combination of SK_PROTO_XXX flags of the protocols
- * for which the caller wants checksum information on received frames.
- *
- * pChecksum1Offset - The start offset of the first receive descriptor
- * hardware checksum to be calculated for received frames is returned
- * here.
- *
- * pChecksum2Offset - The start offset of the second receive descriptor
- * hardware checksum to be calculated for received frames is returned
- * here.
- *
- * Returns: N/A
- * Returns the two hardware checksum start offsets.
- */
-void SkCsSetReceiveFlags(
-SK_AC *pAc, /* Adapter context struct. */
-unsigned ReceiveFlags, /* New receive flags. */
-unsigned *pChecksum1Offset, /* Offset for hardware checksum 1. */
-unsigned *pChecksum2Offset, /* Offset for hardware checksum 2. */
-int NetNumber)
-{
- /* Save the receive flags. */
-
- pAc->Csum.ReceiveFlags[NetNumber] = ReceiveFlags;
-
- /* First checksum start offset is the IP header. */
- *pChecksum1Offset = SKCS_MAC_HEADER_SIZE;
-
- /*
- * Second checksum start offset is the IP data. Note that this may vary
- * if there are any IP header options in the actual packet.
- */
- *pChecksum2Offset = SKCS_MAC_HEADER_SIZE + SKCS_IP_HEADER_SIZE;
-} /* SkCsSetReceiveFlags */
-
-#ifndef SkCsCalculateChecksum
-
-/******************************************************************************
- *
- * SkCsCalculateChecksum - calculate checksum for specified data
- *
- * Description:
- * Calculate and return the 16-bit Internet Checksum for the specified
- * data.
- *
- * Arguments:
- * pData - Pointer to data for which the checksum shall be calculated.
- * Note: The pointer should be aligned on a 16-bit boundary.
- *
- * Length - Length in bytes of data to checksum.
- *
- * Returns:
- * The 16-bit Internet Checksum for the specified data.
- *
- * Note: The checksum is calculated in the machine's natural byte order,
- * i.e. little vs. big endian. Thus, the resulting checksum is different
- * for the same input data on little and big endian machines.
- *
- * However, when written back to the network packet, the byte order is
- * always in correct network order.
- */
-unsigned SkCsCalculateChecksum(
-void *pData, /* Data to checksum. */
-unsigned Length) /* Length of data. */
-{
- SK_U16 *pU16; /* Pointer to the data as 16-bit words. */
- unsigned long Checksum; /* Checksum; must be at least 32 bits. */
-
- /* Sum up all 16-bit words. */
-
- pU16 = (SK_U16 *) pData;
- for (Checksum = 0; Length > 1; Length -= 2) {
- Checksum += *pU16++;
- }
-
- /* If this is an odd number of bytes, add-in the last byte. */
-
- if (Length > 0) {
-#ifdef SK_BIG_ENDIAN
- /* Add the last byte as the high byte. */
- Checksum += ((unsigned) *(SK_U8 *) pU16) << 8;
-#else /* !SK_BIG_ENDIAN */
- /* Add the last byte as the low byte. */
- Checksum += *(SK_U8 *) pU16;
-#endif /* !SK_BIG_ENDIAN */
- }
-
- /* Add-in any carries. */
-
- SKCS_OC_ADD(Checksum, Checksum, 0);
-
- /* Add-in any new carry. */
-
- SKCS_OC_ADD(Checksum, Checksum, 0);
-
- /* Note: All bits beyond the 16-bit limit are now zero. */
-
- return ((unsigned) Checksum);
-} /* SkCsCalculateChecksum */
-
-#endif /* SkCsCalculateChecksum */
-
-/******************************************************************************
- *
- * SkCsEvent - the CSUM event dispatcher
- *
- * Description:
- * This is the event handler for the CSUM module.
- *
- * Arguments:
- * pAc - Pointer to adapter context.
- *
- * Ioc - I/O context.
- *
- * Event - Event id.
- *
- * Param - Event dependent parameter.
- *
- * Returns:
- * The 16-bit Internet Checksum for the specified data.
- *
- * Note: The checksum is calculated in the machine's natural byte order,
- * i.e. little vs. big endian. Thus, the resulting checksum is different
- * for the same input data on little and big endian machines.
- *
- * However, when written back to the network packet, the byte order is
- * always in correct network order.
- */
-int SkCsEvent(
-SK_AC *pAc, /* Pointer to adapter context. */
-SK_IOC Ioc, /* I/O context. */
-SK_U32 Event, /* Event id. */
-SK_EVPARA Param) /* Event dependent parameter. */
-{
- int ProtoIndex;
- int NetNumber;
-
- switch (Event) {
- /*
- * Clear protocol statistics.
- *
- * Param - Protocol index, or -1 for all protocols.
- * - Net number.
- */
- case SK_CSUM_EVENT_CLEAR_PROTO_STATS:
-
- ProtoIndex = (int)Param.Para32[1];
- NetNumber = (int)Param.Para32[0];
- if (ProtoIndex < 0) { /* Clear for all protocols. */
- if (NetNumber >= 0) {
- memset(&pAc->Csum.ProtoStats[NetNumber][0], 0,
- sizeof(pAc->Csum.ProtoStats[NetNumber]));
- }
- }
- else { /* Clear for individual protocol. */
- memset(&pAc->Csum.ProtoStats[NetNumber][ProtoIndex], 0,
- sizeof(pAc->Csum.ProtoStats[NetNumber][ProtoIndex]));
- }
- break;
- default:
- break;
- }
- return (0); /* Success. */
-} /* SkCsEvent */
-
-#endif /* SK_USE_CSUM */