diff options
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/phy/marvell.c | 65 |
1 files changed, 10 insertions, 55 deletions
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index efbbd31ff7..93cf44ad4c 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -303,9 +303,9 @@ static int m88e1111s_config(struct phy_device *phydev) } /** - * m88e1518_phy_writebits - write bits to a register + * m88e151x_phy_writebits - write bits to a register */ -void m88e1518_phy_writebits(struct phy_device *phydev, +void m88e151x_phy_writebits(struct phy_device *phydev, u8 reg_num, u16 offset, u16 len, u16 data) { u16 reg, mask; @@ -323,7 +323,7 @@ void m88e1518_phy_writebits(struct phy_device *phydev, phy_write(phydev, MDIO_DEVAD_NONE, reg_num, reg); } -static int m88e1518_config(struct phy_device *phydev) +static int m88e151x_config(struct phy_device *phydev) { u16 reg; @@ -350,11 +350,11 @@ static int m88e1518_config(struct phy_device *phydev) phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 18); /* In reg 20, write MODE[2:0] = 0x1 (SGMII to Copper) */ - m88e1518_phy_writebits(phydev, MIIM_88E151x_GENERAL_CTRL, + m88e151x_phy_writebits(phydev, MIIM_88E151x_GENERAL_CTRL, 0, 3, MIIM_88E151x_MODE_SGMII); /* PHY reset is necessary after changing MODE[2:0] */ - m88e1518_phy_writebits(phydev, MIIM_88E151x_GENERAL_CTRL, + m88e151x_phy_writebits(phydev, MIIM_88E151x_GENERAL_CTRL, MIIM_88E151x_RESET_OFFS, 1, 1); /* Reset page selection */ @@ -401,33 +401,6 @@ static int m88e1518_config(struct phy_device *phydev) return 0; } -/* Marvell 88E1510 */ -static int m88e1510_config(struct phy_device *phydev) -{ - /* Select page 3 */ - phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, - MIIM_88E1118_PHY_LED_PAGE); - - /* Enable INTn output on LED[2] */ - m88e1518_phy_writebits(phydev, MIIM_88E151x_LED_TIMER_CTRL, - MIIM_88E151x_INT_EN_OFFS, 1, 1); - - /* Configure LEDs */ - /* LED[0]:0011 (ACT) */ - m88e1518_phy_writebits(phydev, MIIM_88E151x_LED_FUNC_CTRL, - MIIM_88E151x_LED0_OFFS, MIIM_88E151x_LED_FLD_SZ, - MIIM_88E151x_LED0_ACT); - /* LED[1]:0110 (LINK 100/1000 Mbps) */ - m88e1518_phy_writebits(phydev, MIIM_88E151x_LED_FUNC_CTRL, - MIIM_88E151x_LED1_OFFS, MIIM_88E151x_LED_FLD_SZ, - MIIM_88E151x_LED1_100_1000_LINK); - - /* Reset page selection */ - phy_write(phydev, MDIO_DEVAD_NONE, MIIM_88E1118_PHY_PAGE, 0); - - return m88e1518_config(phydev); -} - /* Marvell 88E1118 */ static int m88e1118_config(struct phy_device *phydev) { @@ -685,29 +658,12 @@ static struct phy_driver M88E1149S_driver = { .shutdown = &genphy_shutdown, }; -static struct phy_driver M88E1510_driver = { - .name = "Marvell 88E1510", - .uid = 0x1410dd0, - .mask = 0xfffffff, - .features = PHY_GBIT_FEATURES, - .config = &m88e1510_config, - .startup = &m88e1011s_startup, - .shutdown = &genphy_shutdown, - .readext = &m88e1xxx_phy_extread, - .writeext = &m88e1xxx_phy_extwrite, -}; - -/* - * This supports: - * 88E1518, uid 0x1410dd1 - * 88E1512, uid 0x1410dd4 - */ -static struct phy_driver M88E1518_driver = { - .name = "Marvell 88E1518", +static struct phy_driver M88E151x_driver = { + .name = "Marvell 88E151x", .uid = 0x1410dd0, - .mask = 0xffffffa, + .mask = 0xffffff0, .features = PHY_GBIT_FEATURES, - .config = &m88e1518_config, + .config = &m88e151x_config, .startup = &m88e1011s_startup, .shutdown = &genphy_shutdown, .readext = &m88e1xxx_phy_extread, @@ -744,8 +700,7 @@ int phy_marvell_init(void) phy_register(&M88E1118R_driver); phy_register(&M88E1111S_driver); phy_register(&M88E1011S_driver); - phy_register(&M88E1510_driver); - phy_register(&M88E1518_driver); + phy_register(&M88E151x_driver); phy_register(&M88E1680_driver); return 0; |