diff options
Diffstat (limited to 'drivers/power/axp209.c')
| -rw-r--r-- | drivers/power/axp209.c | 24 |
1 files changed, 24 insertions, 0 deletions
diff --git a/drivers/power/axp209.c b/drivers/power/axp209.c index 819b168a84..cf138fc722 100644 --- a/drivers/power/axp209.c +++ b/drivers/power/axp209.c @@ -9,6 +9,16 @@ #include <asm/arch/pmic_bus.h> #include <axp_pmic.h> +#ifdef CONFIG_AXP_ALDO3_VOLT_SLOPE_08 +# define AXP209_VRC_SLOPE AXP209_VRC_LDO3_800uV_uS +#endif +#ifdef CONFIG_AXP_ALDO3_VOLT_SLOPE_16 +# define AXP209_VRC_SLOPE AXP209_VRC_LDO3_1600uV_uS +#endif +#if defined CONFIG_AXP_ALDO3_VOLT_SLOPE_NONE || !defined AXP209_VRC_SLOPE +# define AXP209_VRC_SLOPE 0x00 +#endif + static u8 axp209_mvolt_to_cfg(int mvolt, int min, int max, int div) { if (mvolt < min) @@ -98,6 +108,20 @@ int axp_set_aldo3(unsigned int mvolt) return pmic_bus_clrbits(AXP209_OUTPUT_CTRL, AXP209_OUTPUT_CTRL_LDO3); + /* + * Some boards have trouble reaching the target voltage without causing + * great inrush currents. To prevent this, boards can enable a certain + * slope to ramp up voltage. Note, this only works when changing an + * already active power rail. When toggling power on, the AXP ramps up + * steeply at 0.0167 V/uS. + */ + rc = pmic_bus_read(AXP209_VRC_DCDC2_LDO3, &cfg); + cfg = AXP209_VRC_LDO3_SLOPE_SET(cfg, AXP209_VRC_SLOPE); + rc |= pmic_bus_write(AXP209_VRC_DCDC2_LDO3, cfg); + + if (rc) + return rc; + if (mvolt == -1) { cfg = AXP209_LDO3_VOLTAGE_FROM_LDO3IN; } else { |