diff options
Diffstat (limited to 'drivers/ram/stm32mp1')
| -rw-r--r-- | drivers/ram/stm32mp1/stm32mp1_ddr.c | 54 | ||||
| -rw-r--r-- | drivers/ram/stm32mp1/stm32mp1_ddr.h | 1 | ||||
| -rw-r--r-- | drivers/ram/stm32mp1/stm32mp1_ddr_regs.h | 1 | ||||
| -rw-r--r-- | drivers/ram/stm32mp1/stm32mp1_interactive.c | 17 | ||||
| -rw-r--r-- | drivers/ram/stm32mp1/stm32mp1_ram.c | 34 | ||||
| -rw-r--r-- | drivers/ram/stm32mp1/stm32mp1_tuning.c | 223 |
6 files changed, 271 insertions, 59 deletions
diff --git a/drivers/ram/stm32mp1/stm32mp1_ddr.c b/drivers/ram/stm32mp1/stm32mp1_ddr.c index d765a46f7c..11b14ae652 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ddr.c +++ b/drivers/ram/stm32mp1/stm32mp1_ddr.c @@ -639,7 +639,8 @@ void stm32mp1_refresh_disable(struct stm32mp1_ddrctl *ctl) start_sw_done(ctl); /* quasi-dynamic register update*/ setbits_le32(&ctl->rfshctl3, DDRCTRL_RFSHCTL3_DIS_AUTO_REFRESH); - clrbits_le32(&ctl->pwrctl, DDRCTRL_PWRCTL_POWERDOWN_EN); + clrbits_le32(&ctl->pwrctl, DDRCTRL_PWRCTL_POWERDOWN_EN | + DDRCTRL_PWRCTL_SELFREF_EN); clrbits_le32(&ctl->dfimisc, DDRCTRL_DFIMISC_DFI_INIT_COMPLETE_EN); wait_sw_done_ack(ctl); } @@ -652,6 +653,8 @@ void stm32mp1_refresh_restore(struct stm32mp1_ddrctl *ctl, clrbits_le32(&ctl->rfshctl3, DDRCTRL_RFSHCTL3_DIS_AUTO_REFRESH); if (pwrctl & DDRCTRL_PWRCTL_POWERDOWN_EN) setbits_le32(&ctl->pwrctl, DDRCTRL_PWRCTL_POWERDOWN_EN); + if ((pwrctl & DDRCTRL_PWRCTL_SELFREF_EN)) + setbits_le32(&ctl->pwrctl, DDRCTRL_PWRCTL_SELFREF_EN); setbits_le32(&ctl->dfimisc, DDRCTRL_DFIMISC_DFI_INIT_COMPLETE_EN); wait_sw_done_ack(ctl); } @@ -668,14 +671,34 @@ void stm32mp1_ddr_init(struct ddr_info *priv, { u32 pir; int ret = -EINVAL; + char bus_width; + + switch (config->c_reg.mstr & DDRCTRL_MSTR_DATA_BUS_WIDTH_MASK) { + case DDRCTRL_MSTR_DATA_BUS_WIDTH_QUARTER: + bus_width = 8; + break; + case DDRCTRL_MSTR_DATA_BUS_WIDTH_HALF: + bus_width = 16; + break; + default: + bus_width = 32; + break; + } + if (config->c_reg.mstr & DDRCTRL_MSTR_DDR3) ret = board_ddr_power_init(STM32MP_DDR3); - else if (config->c_reg.mstr & DDRCTRL_MSTR_LPDDR2) - ret = board_ddr_power_init(STM32MP_LPDDR2); - else if (config->c_reg.mstr & DDRCTRL_MSTR_LPDDR3) - ret = board_ddr_power_init(STM32MP_LPDDR3); - + else if (config->c_reg.mstr & DDRCTRL_MSTR_LPDDR2) { + if (bus_width == 32) + ret = board_ddr_power_init(STM32MP_LPDDR2_32); + else + ret = board_ddr_power_init(STM32MP_LPDDR2_16); + } else if (config->c_reg.mstr & DDRCTRL_MSTR_LPDDR3) { + if (bus_width == 32) + ret = board_ddr_power_init(STM32MP_LPDDR3_32); + else + ret = board_ddr_power_init(STM32MP_LPDDR3_16); + } if (ret) panic("ddr power init failed\n"); @@ -746,7 +769,8 @@ start: */ set_reg(priv, REGPHY_REG, &config->p_reg); set_reg(priv, REGPHY_TIMING, &config->p_timing); - set_reg(priv, REGPHY_CAL, &config->p_cal); + if (config->p_cal_present) + set_reg(priv, REGPHY_CAL, &config->p_cal); if (INTERACTIVE(STEP_PHY_INIT)) goto start; @@ -781,13 +805,16 @@ start: wait_operating_mode(priv, DDRCTRL_STAT_OPERATING_MODE_NORMAL); - debug("DDR DQS training : "); + if (config->p_cal_present) { + debug("DDR DQS training skipped.\n"); + } else { + debug("DDR DQS training : "); /* 8. Disable Auto refresh and power down by setting * - RFSHCTL3.dis_au_refresh = 1 * - PWRCTL.powerdown_en = 0 * - DFIMISC.dfiinit_complete_en = 0 */ - stm32mp1_refresh_disable(priv->ctl); + stm32mp1_refresh_disable(priv->ctl); /* 9. Program PUBL PGCR to enable refresh during training and rank to train * not done => keep the programed value in PGCR @@ -795,14 +822,15 @@ start: /* 10. configure PUBL PIR register to specify which training step to run */ /* warning : RVTRN is not supported by this PUBL */ - stm32mp1_ddrphy_init(priv->phy, DDRPHYC_PIR_QSTRN); + stm32mp1_ddrphy_init(priv->phy, DDRPHYC_PIR_QSTRN); /* 11. monitor PUB PGSR.IDONE to poll cpmpletion of training sequence */ - ddrphy_idone_wait(priv->phy); + ddrphy_idone_wait(priv->phy); /* 12. set back registers in step 8 to the orginal values if desidered */ - stm32mp1_refresh_restore(priv->ctl, config->c_reg.rfshctl3, - config->c_reg.pwrctl); + stm32mp1_refresh_restore(priv->ctl, config->c_reg.rfshctl3, + config->c_reg.pwrctl); + } /* if (config->p_cal_present) */ /* enable uMCTL2 AXI port 0 and 1 */ setbits_le32(&priv->ctl->pctrl_0, DDRCTRL_PCTRL_N_PORT_EN); diff --git a/drivers/ram/stm32mp1/stm32mp1_ddr.h b/drivers/ram/stm32mp1/stm32mp1_ddr.h index 52b748f3ca..4998f04439 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ddr.h +++ b/drivers/ram/stm32mp1/stm32mp1_ddr.h @@ -170,6 +170,7 @@ struct stm32mp1_ddr_config { struct stm32mp1_ddrphy_reg p_reg; struct stm32mp1_ddrphy_timing p_timing; struct stm32mp1_ddrphy_cal p_cal; + bool p_cal_present; }; int stm32mp1_ddr_clk_enable(struct ddr_info *priv, u32 mem_speed); diff --git a/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h b/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h index 9d33186b3a..afd93c518e 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h +++ b/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h @@ -260,6 +260,7 @@ struct stm32mp1_ddrphy { #define DDRCTRL_MRSTAT_MR_WR_BUSY BIT(0) +#define DDRCTRL_PWRCTL_SELFREF_EN BIT(0) #define DDRCTRL_PWRCTL_POWERDOWN_EN BIT(1) #define DDRCTRL_PWRCTL_SELFREF_SW BIT(5) diff --git a/drivers/ram/stm32mp1/stm32mp1_interactive.c b/drivers/ram/stm32mp1/stm32mp1_interactive.c index cc9b2e7c96..805c9ddaad 100644 --- a/drivers/ram/stm32mp1/stm32mp1_interactive.c +++ b/drivers/ram/stm32mp1/stm32mp1_interactive.c @@ -106,7 +106,7 @@ static void stm32mp1_do_usage(void) "help displays help\n" "info displays DDR information\n" "info <param> <val> changes DDR information\n" - " with <param> = step, name, size or speed\n" + " with <param> = step, name, size, speed or cal\n" "freq displays the DDR PHY frequency in kHz\n" "freq <freq> changes the DDR PHY frequency\n" "param [type|reg] prints input parameters\n" @@ -160,6 +160,7 @@ static void stm32mp1_do_info(struct ddr_info *priv, printf("name = %s\n", config->info.name); printf("size = 0x%x\n", config->info.size); printf("speed = %d kHz\n", config->info.speed); + printf("cal = %d\n", config->p_cal_present); return; } @@ -208,6 +209,16 @@ static void stm32mp1_do_info(struct ddr_info *priv, } return; } + if (!strcmp(argv[1], "cal")) { + if (strict_strtoul(argv[2], 10, &value) < 0 || + (value != 0 && value != 1)) { + printf("invalid value %s\n", argv[2]); + } else { + config->p_cal_present = value; + printf("cal = %d\n", config->p_cal_present); + } + return; + } printf("argument %s invalid\n", argv[1]); } @@ -367,7 +378,6 @@ bool stm32mp1_ddr_interactive(void *priv, enum stm32mp1_ddr_interact_step step, const struct stm32mp1_ddr_config *config) { - const char *prompt = "DDR>"; char buffer[CONFIG_SYS_CBSIZE]; char *argv[CONFIG_SYS_MAXARGS + 1]; /* NULL terminated */ int argc; @@ -403,13 +413,12 @@ bool stm32mp1_ddr_interactive(void *priv, } printf("%d:%s\n", step, step_str[step]); - printf("%s\n", prompt); if (next_step > step) return false; while (next_step == step) { - cli_readline_into_buffer(prompt, buffer, 0); + cli_readline_into_buffer("DDR>", buffer, 0); argc = cli_simple_parse_line(buffer, argv); if (!argc) continue; diff --git a/drivers/ram/stm32mp1/stm32mp1_ram.c b/drivers/ram/stm32mp1/stm32mp1_ram.c index eb78f1198d..b1e593f86b 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ram.c +++ b/drivers/ram/stm32mp1/stm32mp1_ram.c @@ -65,18 +65,22 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) struct clk axidcg; struct stm32mp1_ddr_config config; -#define PARAM(x, y) \ - { x,\ - offsetof(struct stm32mp1_ddr_config, y),\ - sizeof(config.y) / sizeof(u32)} +#define PARAM(x, y, z) \ + { .name = x, \ + .offset = offsetof(struct stm32mp1_ddr_config, y), \ + .size = sizeof(config.y) / sizeof(u32), \ + .present = z, \ + } -#define CTL_PARAM(x) PARAM("st,ctl-"#x, c_##x) -#define PHY_PARAM(x) PARAM("st,phy-"#x, p_##x) +#define CTL_PARAM(x) PARAM("st,ctl-"#x, c_##x, NULL) +#define PHY_PARAM(x) PARAM("st,phy-"#x, p_##x, NULL) +#define PHY_PARAM_OPT(x) PARAM("st,phy-"#x, p_##x, &config.p_##x##_present) const struct { const char *name; /* name in DT */ const u32 offset; /* offset in config struct */ const u32 size; /* size of parameters */ + bool * const present; /* presence indication for opt */ } param[] = { CTL_PARAM(reg), CTL_PARAM(timing), @@ -84,7 +88,7 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) CTL_PARAM(perf), PHY_PARAM(reg), PHY_PARAM(timing), - PHY_PARAM(cal) + PHY_PARAM_OPT(cal) }; config.info.speed = dev_read_u32_default(dev, "st,mem-speed", 0); @@ -103,11 +107,25 @@ static __maybe_unused int stm32mp1_ddr_setup(struct udevice *dev) param[idx].size); debug("%s: %s[0x%x] = %d\n", __func__, param[idx].name, param[idx].size, ret); - if (ret) { + if (ret && + (ret != -FDT_ERR_NOTFOUND || !param[idx].present)) { pr_err("%s: Cannot read %s, error=%d\n", __func__, param[idx].name, ret); return -EINVAL; } + if (param[idx].present) { + /* save presence of optional parameters */ + *param[idx].present = true; + if (ret == -FDT_ERR_NOTFOUND) { + *param[idx].present = false; +#ifdef CONFIG_STM32MP1_DDR_INTERACTIVE + /* reset values if used later */ + memset((void *)((u32)&config + + param[idx].offset), + 0, param[idx].size * sizeof(u32)); +#endif + } + } } ret = clk_get_by_name(dev, "axidcg", &axidcg); diff --git a/drivers/ram/stm32mp1/stm32mp1_tuning.c b/drivers/ram/stm32mp1/stm32mp1_tuning.c index 4e1c1fab54..3013b7b667 100644 --- a/drivers/ram/stm32mp1/stm32mp1_tuning.c +++ b/drivers/ram/stm32mp1/stm32mp1_tuning.c @@ -8,6 +8,8 @@ #include <ram.h> #include <reset.h> #include <asm/io.h> +#include <linux/bitops.h> +#include <linux/iopoll.h> #include "stm32mp1_ddr_regs.h" #include "stm32mp1_ddr.h" @@ -75,6 +77,133 @@ static u8 get_nb_bytes(struct stm32mp1_ddrctl *ctl) return nb_bytes; } +static u8 get_nb_bank(struct stm32mp1_ddrctl *ctl) +{ + /* Count bank address bits */ + u8 bits = 0; + u32 reg, val; + + reg = readl(&ctl->addrmap1); + /* addrmap1.addrmap_bank_b1 */ + val = (reg & GENMASK(5, 0)) >> 0; + if (val <= 31) + bits++; + /* addrmap1.addrmap_bank_b2 */ + val = (reg & GENMASK(13, 8)) >> 8; + if (val <= 31) + bits++; + /* addrmap1.addrmap_bank_b3 */ + val = (reg & GENMASK(21, 16)) >> 16; + if (val <= 31) + bits++; + + return bits; +} + +static u8 get_nb_col(struct stm32mp1_ddrctl *ctl) +{ + u8 bits; + u32 reg, val; + + /* Count column address bits, start at 2 for b0 and b1 (fixed) */ + bits = 2; + + reg = readl(&ctl->addrmap2); + /* addrmap2.addrmap_col_b2 */ + val = (reg & GENMASK(3, 0)) >> 0; + if (val <= 7) + bits++; + /* addrmap2.addrmap_col_b3 */ + val = (reg & GENMASK(11, 8)) >> 8; + if (val <= 7) + bits++; + /* addrmap2.addrmap_col_b4 */ + val = (reg & GENMASK(19, 16)) >> 16; + if (val <= 7) + bits++; + /* addrmap2.addrmap_col_b5 */ + val = (reg & GENMASK(27, 24)) >> 24; + if (val <= 7) + bits++; + + reg = readl(&ctl->addrmap3); + /* addrmap3.addrmap_col_b6 */ + val = (reg & GENMASK(3, 0)) >> 0; + if (val <= 7) + bits++; + /* addrmap3.addrmap_col_b7 */ + val = (reg & GENMASK(11, 8)) >> 8; + if (val <= 7) + bits++; + /* addrmap3.addrmap_col_b8 */ + val = (reg & GENMASK(19, 16)) >> 16; + if (val <= 7) + bits++; + /* addrmap3.addrmap_col_b9 */ + val = (reg & GENMASK(27, 24)) >> 24; + if (val <= 7) + bits++; + + reg = readl(&ctl->addrmap4); + /* addrmap4.addrmap_col_b10 */ + val = (reg & GENMASK(3, 0)) >> 0; + if (val <= 7) + bits++; + /* addrmap4.addrmap_col_b11 */ + val = (reg & GENMASK(11, 8)) >> 8; + if (val <= 7) + bits++; + + return bits; +} + +static u8 get_nb_row(struct stm32mp1_ddrctl *ctl) +{ + /* Count row address bits */ + u8 bits = 0; + u32 reg, val; + + reg = readl(&ctl->addrmap5); + /* addrmap5.addrmap_row_b0 */ + val = (reg & GENMASK(3, 0)) >> 0; + if (val <= 11) + bits++; + /* addrmap5.addrmap_row_b1 */ + val = (reg & GENMASK(11, 8)) >> 8; + if (val <= 11) + bits++; + /* addrmap5.addrmap_row_b2_10 */ + val = (reg & GENMASK(19, 16)) >> 16; + if (val <= 11) + bits += 9; + else + printf("warning: addrmap5.addrmap_row_b2_10 not supported\n"); + /* addrmap5.addrmap_row_b11 */ + val = (reg & GENMASK(27, 24)) >> 24; + if (val <= 11) + bits++; + + reg = readl(&ctl->addrmap6); + /* addrmap6.addrmap_row_b12 */ + val = (reg & GENMASK(3, 0)) >> 0; + if (val <= 7) + bits++; + /* addrmap6.addrmap_row_b13 */ + val = (reg & GENMASK(11, 8)) >> 8; + if (val <= 7) + bits++; + /* addrmap6.addrmap_row_b14 */ + val = (reg & GENMASK(19, 16)) >> 16; + if (val <= 7) + bits++; + /* addrmap6.addrmap_row_b15 */ + val = (reg & GENMASK(27, 24)) >> 24; + if (val <= 7) + bits++; + + return bits; +} + static void itm_soft_reset(struct stm32mp1_ddrphy *phy) { stm32mp1_ddrphy_init(phy, DDRPHYC_PIR_ITMSRST); @@ -169,8 +298,13 @@ static void set_r0dgps_delay(struct stm32mp1_ddrphy *phy, } /* Basic BIST configuration for data lane tests. */ -static void config_BIST(struct stm32mp1_ddrphy *phy) +static void config_BIST(struct stm32mp1_ddrctl *ctl, + struct stm32mp1_ddrphy *phy) { + u8 nb_bank = get_nb_bank(ctl); + u8 nb_row = get_nb_row(ctl); + u8 nb_col = get_nb_col(ctl); + /* Selects the SDRAM bank address to be used during BIST. */ u32 bbank = 0; /* Selects the SDRAM row address to be used during BIST. */ @@ -190,18 +324,20 @@ static void config_BIST(struct stm32mp1_ddrphy *phy) * must be 0 with single rank */ u32 brank = 0; + /* Specifies the maximum SDRAM bank address to be used during * BIST before the address & increments to the next rank. */ - u32 bmbank = 1; + u32 bmbank = (1 << nb_bank) - 1; /* Specifies the maximum SDRAM row address to be used during * BIST before the address & increments to the next bank. */ - u32 bmrow = 0x7FFF; /* To check */ + u32 bmrow = (1 << nb_row) - 1; /* Specifies the maximum SDRAM column address to be used during * BIST before the address & increments to the next row. */ - u32 bmcol = 0x3FF; /* To check */ + u32 bmcol = (1 << nb_col) - 1; + u32 bmode_conf = 0x00000001; /* DRam mode */ u32 bdxen_conf = 0x00000001; /* BIST on Data byte */ u32 bdpat_conf = 0x00000002; /* Select LFSR pattern */ @@ -223,8 +359,6 @@ static void config_BIST(struct stm32mp1_ddrphy *phy) writel(bcol | (brow << 12) | (bbank << 28), &phy->bistar0); writel(brank | (bmrank << 2) | (bainc << 4), &phy->bistar1); - - /* To check this line : */ writel(bmcol | (bmrow << 12) | (bmbank << 28), &phy->bistar2); } @@ -246,6 +380,8 @@ static void BIST_test(struct stm32mp1_ddrphy *phy, u8 byte, bool result = true; /* BIST_SUCCESS */ u32 cnt = 0; u32 error = 0; + u32 val; + int ret; bist->test_result = true; @@ -266,7 +402,7 @@ run: writel(rand(), &phy->bistlsr); /* some delay to reset BIST */ - mdelay(1); + udelay(10); /*Perform BIST Run*/ clrsetbits_le32(&phy->bistrr, @@ -274,27 +410,29 @@ run: 0x00000001); /* Write BISTRR.BINST = 3?b001; */ - /* Wait for a number of CTL clocks before reading BIST register*/ - /* Wait 300 ctl_clk cycles; ... IS it really needed?? */ - /* Perform BIST Instruction Stop*/ - /* Write BISTRR.BINST = 3?b010;*/ - - /* poll on BISTGSR.BDONE. If 0, wait. ++TODO Add timeout */ - while (!(readl(&phy->bistgsr) & DDRPHYC_BISTGSR_BDDONE)) - ; - - /*Check if received correct number of words*/ - /* if (Read BISTWCSR.DXWCNT = Read BISTWCR.BWCNT) */ - if (((readl(&phy->bistwcsr)) >> DDRPHYC_BISTWCSR_DXWCNT_SHIFT) == - readl(&phy->bistwcr)) { - /*Determine if there is a data comparison error*/ - /* if (Read BISTGSR.BDXERR = 1?b0) */ - if (readl(&phy->bistgsr) & DDRPHYC_BISTGSR_BDXERR) - result = false; /* BIST_FAIL; */ - else - result = true; /* BIST_SUCCESS; */ - } else { + /* poll on BISTGSR.BDONE and wait max 1000 us */ + ret = readl_poll_timeout(&phy->bistgsr, val, + val & DDRPHYC_BISTGSR_BDDONE, 1000); + + if (ret < 0) { + printf("warning: BIST timeout\n"); result = false; /* BIST_FAIL; */ + /*Perform BIST Stop */ + clrsetbits_le32(&phy->bistrr, 0x00000007, 0x00000002); + } else { + /*Check if received correct number of words*/ + /* if (Read BISTWCSR.DXWCNT = Read BISTWCR.BWCNT) */ + if (((readl(&phy->bistwcsr)) >> DDRPHYC_BISTWCSR_DXWCNT_SHIFT) + == readl(&phy->bistwcr)) { + /*Determine if there is a data comparison error*/ + /* if (Read BISTGSR.BDXERR = 1?b0) */ + if (readl(&phy->bistgsr) & DDRPHYC_BISTGSR_BDXERR) + result = false; /* BIST_FAIL; */ + else + result = true; /* BIST_SUCCESS; */ + } else { + result = false; /* BIST_FAIL; */ + } } /* loop while success */ @@ -394,7 +532,7 @@ static enum test_result bit_deskew(struct stm32mp1_ddrctl *ctl, clrbits_le32(&phy->dx3gcr, DDRPHYC_DXNGCR_DXEN); /* Config the BIST block */ - config_BIST(phy); + config_BIST(ctl, phy); pr_debug("BIST Config done.\n"); /* Train each byte */ @@ -807,7 +945,7 @@ static enum test_result eye_training(struct stm32mp1_ddrctl *ctl, clrbits_le32(&phy->dx3gcr, DDRPHYC_DXNGCR_DXEN); /* Config the BIST block */ - config_BIST(phy); + config_BIST(ctl, phy); for (byte = 0; byte < nb_bytes; byte++) { if (ctrlc()) { @@ -1182,15 +1320,17 @@ static u8 set_midpoint_read_dqs_gating(struct stm32mp1_ddrphy *phy, u8 byte, dqs_gate_values[byte][0], dqs_gate_values[byte][1]); pr_debug("*******the nominal values were system latency: 0 phase: 2*******\n"); - set_r0dgsl_delay(phy, byte, dqs_gate_values[byte][0]); - set_r0dgps_delay(phy, byte, dqs_gate_values[byte][1]); } } else { /* if intermitant, restore defaut values */ pr_debug("dqs gating:no regular fail/pass/fail found. defaults values restored.\n"); - set_r0dgsl_delay(phy, byte, 0); - set_r0dgps_delay(phy, byte, 2); + dqs_gate_values[byte][0] = 0; + dqs_gate_values[byte][1] = 2; } + set_r0dgsl_delay(phy, byte, dqs_gate_values[byte][0]); + set_r0dgps_delay(phy, byte, dqs_gate_values[byte][1]); + printf("Byte %d, R0DGSL = %d, R0DGPS = %d\n", + byte, dqs_gate_values[byte][0], dqs_gate_values[byte][1]); /* return 0 if intermittent or if both left_bound * and right_bound are not found @@ -1227,7 +1367,7 @@ static enum test_result read_dqs_gating(struct stm32mp1_ddrctl *ctl, clrbits_le32(&phy->dx3gcr, DDRPHYC_DXNGCR_DXEN); /* config the bist block */ - config_BIST(phy); + config_BIST(ctl, phy); for (byte = 0; byte < nb_bytes; byte++) { if (ctrlc()) { @@ -1281,11 +1421,16 @@ static enum test_result do_read_dqs_gating(struct stm32mp1_ddrctl *ctl, { u32 rfshctl3 = readl(&ctl->rfshctl3); u32 pwrctl = readl(&ctl->pwrctl); + u32 derateen = readl(&ctl->derateen); enum test_result res; + writel(0x0, &ctl->derateen); stm32mp1_refresh_disable(ctl); + res = read_dqs_gating(ctl, phy, string); + stm32mp1_refresh_restore(ctl, rfshctl3, pwrctl); + writel(derateen, &ctl->derateen); return res; } @@ -1296,11 +1441,16 @@ static enum test_result do_bit_deskew(struct stm32mp1_ddrctl *ctl, { u32 rfshctl3 = readl(&ctl->rfshctl3); u32 pwrctl = readl(&ctl->pwrctl); + u32 derateen = readl(&ctl->derateen); enum test_result res; + writel(0x0, &ctl->derateen); stm32mp1_refresh_disable(ctl); + res = bit_deskew(ctl, phy, string); + stm32mp1_refresh_restore(ctl, rfshctl3, pwrctl); + writel(derateen, &ctl->derateen); return res; } @@ -1311,11 +1461,16 @@ static enum test_result do_eye_training(struct stm32mp1_ddrctl *ctl, { u32 rfshctl3 = readl(&ctl->rfshctl3); u32 pwrctl = readl(&ctl->pwrctl); + u32 derateen = readl(&ctl->derateen); enum test_result res; + writel(0x0, &ctl->derateen); stm32mp1_refresh_disable(ctl); + res = eye_training(ctl, phy, string); + stm32mp1_refresh_restore(ctl, rfshctl3, pwrctl); + writel(derateen, &ctl->derateen); return res; } |