1 files changed, 0 insertions, 130 deletions
diff --git a/drivers/serial/serial_ixp.c b/drivers/serial/serial_ixp.c
deleted file mode 100644
index b9d0f5bfa5..0000000000
--- a/drivers/serial/serial_ixp.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/arch/ixp425.h>
-#include <watchdog.h>
-#include <serial.h>
-#include <linux/compiler.h>
-
-/*
- *               14.7456 MHz
- * Baud Rate = --------------
- *              16 x Divisor
- */
-#define SERIAL_CLOCK 921600
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void ixp_serial_setbrg(void)
-{
-	unsigned int quot = 0;
-	int uart = CONFIG_SYS_IXP425_CONSOLE;
-
-	if ((gd->baudrate <= SERIAL_CLOCK) && (SERIAL_CLOCK % gd->baudrate == 0))
-		quot = SERIAL_CLOCK / gd->baudrate;
-	else
-		hang ();
-
-	IER(uart) = 0;					/* Disable for now */
-	FCR(uart) = 0;					/* No fifos enabled */
-
-	/* set baud rate */
-	LCR(uart) = LCR_WLS0 | LCR_WLS1 | LCR_DLAB;
-	DLL(uart) = quot & 0xff;
-	DLH(uart) = quot >> 8;
-	LCR(uart) = LCR_WLS0 | LCR_WLS1;
-#ifdef CONFIG_SERIAL_RTS_ACTIVE
-	MCR(uart) = MCR_RTS;				/* set RTS active */
-#else
-	MCR(uart) = 0;					/* set RTS inactive */
-#endif
-	IER(uart) = IER_UUE;
-}
-
-/*
- * Initialise the serial port with the given baudrate. The settings
- * are always 8 data bits, no parity, 1 stop bit, no start bits.
- *
- */
-static int ixp_serial_init(void)
-{
-	serial_setbrg ();
-
-	return (0);
-}
-
-
-/*
- * Output a single byte to the serial port.
- */
-static void ixp_serial_putc(const char c)
-{
-	/* wait for room in the tx FIFO on UART */
-	while ((LSR(CONFIG_SYS_IXP425_CONSOLE) & LSR_TEMT) == 0)
-		WATCHDOG_RESET();	/* Reset HW Watchdog, if needed */
-
-	THR(CONFIG_SYS_IXP425_CONSOLE) = c;
-
-	/* If \n, also do \r */
-	if (c == '\n')
-		serial_putc ('\r');
-}
-
-/*
- * Read a single byte from the serial port. Returns 1 on success, 0
- * otherwise. When the function is succesfull, the character read is
- * written into its argument c.
- */
-static int ixp_serial_tstc(void)
-{
-	return LSR(CONFIG_SYS_IXP425_CONSOLE) & LSR_DR;
-}
-
-/*
- * Read a single byte from the serial port. Returns 1 on success, 0
- * otherwise. When the function is succesfull, the character read is
- * written into its argument c.
- */
-static int ixp_serial_getc(void)
-{
-	while (!(LSR(CONFIG_SYS_IXP425_CONSOLE) & LSR_DR))
-		WATCHDOG_RESET();	/* Reset HW Watchdog, if needed */
-
-	return (char) RBR(CONFIG_SYS_IXP425_CONSOLE) & 0xff;
-}
-
-static struct serial_device ixp_serial_drv = {
-	.name	= "ixp_serial",
-	.start	= ixp_serial_init,
-	.stop	= NULL,
-	.setbrg	= ixp_serial_setbrg,
-	.putc	= ixp_serial_putc,
-	.puts	= default_serial_puts,
-	.getc	= ixp_serial_getc,
-	.tstc	= ixp_serial_tstc,
-};
-
-void ixp_serial_initialize(void)
-{
-	serial_register(&ixp_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
-	return &ixp_serial_drv;
-}