diff options
Diffstat (limited to 'drivers/serial/serial_ks8695.c')
-rw-r--r-- | drivers/serial/serial_ks8695.c | 121 |
1 files changed, 0 insertions, 121 deletions
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c deleted file mode 100644 index 13adabd112..0000000000 --- a/drivers/serial/serial_ks8695.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * serial.c -- KS8695 serial driver - * - * (C) Copyright 2004, Greg Ungerer <greg.ungerer@opengear.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/arch/platform.h> -#include <serial.h> -#include <linux/compiler.h> - -#ifndef CONFIG_SERIAL1 -#error "Bad: you didn't configure serial ..." -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Define the UART hardware register access structure. - */ -struct ks8695uart { - unsigned int RX; /* 0x00 - Receive data (r) */ - unsigned int TX; /* 0x04 - Transmit data (w) */ - unsigned int FCR; /* 0x08 - Fifo Control (r/w) */ - unsigned int LCR; /* 0x0c - Line Control (r/w) */ - unsigned int MCR; /* 0x10 - Modem Control (r/w) */ - unsigned int LSR; /* 0x14 - Line Status (r/w) */ - unsigned int MSR; /* 0x18 - Modem Status (r/w) */ - unsigned int BD; /* 0x1c - Baud Rate (r/w) */ - unsigned int SR; /* 0x20 - Status (r/w) */ -}; - -#define KS8695_UART_ADDR ((void *) (KS8695_IO_BASE + KS8695_UART_RX_BUFFER)) -#define KS8695_UART_CLK 25000000 - - -/* - * Under some circumstances we want to be "quiet" and not issue any - * serial output - though we want u-boot to otherwise work and behave - * the same. By default be noisy. - */ -int serial_console = 1; - - -static void ks8695_serial_setbrg(void) -{ - volatile struct ks8695uart *uartp = KS8695_UART_ADDR; - - /* Set to global baud rate and 8 data bits, no parity, 1 stop bit*/ - uartp->BD = KS8695_UART_CLK / gd->baudrate; - uartp->LCR = KS8695_UART_LINEC_WLEN8; -} - -static int ks8695_serial_init(void) -{ - serial_console = 1; - serial_setbrg(); - return 0; -} - -static void ks8695_serial_raw_putc(const char c) -{ - volatile struct ks8695uart *uartp = KS8695_UART_ADDR; - int i; - - for (i = 0; (i < 0x100000); i++) { - if (uartp->LSR & KS8695_UART_LINES_TXFE) - break; - } - - uartp->TX = c; -} - -static void ks8695_serial_putc(const char c) -{ - if (serial_console) { - ks8695_serial_raw_putc(c); - if (c == '\n') - ks8695_serial_raw_putc('\r'); - } -} - -static int ks8695_serial_tstc(void) -{ - volatile struct ks8695uart *uartp = KS8695_UART_ADDR; - if (serial_console) - return ((uartp->LSR & KS8695_UART_LINES_RXFE) ? 1 : 0); - return 0; -} - -static int ks8695_serial_getc(void) -{ - volatile struct ks8695uart *uartp = KS8695_UART_ADDR; - - while ((uartp->LSR & KS8695_UART_LINES_RXFE) == 0) - ; - return (uartp->RX); -} - -static struct serial_device ks8695_serial_drv = { - .name = "ks8695_serial", - .start = ks8695_serial_init, - .stop = NULL, - .setbrg = ks8695_serial_setbrg, - .putc = ks8695_serial_putc, - .puts = default_serial_puts, - .getc = ks8695_serial_getc, - .tstc = ks8695_serial_tstc, -}; - -void ks8695_serial_initialize(void) -{ - serial_register(&ks8695_serial_drv); -} - -__weak struct serial_device *default_serial_console(void) -{ - return &ks8695_serial_drv; -} |