diff options
Diffstat (limited to 'drivers/smc91111.h')
| -rw-r--r-- | drivers/smc91111.h | 619 |
1 files changed, 619 insertions, 0 deletions
diff --git a/drivers/smc91111.h b/drivers/smc91111.h new file mode 100644 index 0000000000..a372c2734d --- /dev/null +++ b/drivers/smc91111.h @@ -0,0 +1,619 @@ +/*------------------------------------------------------------------------ + . smc91111.h - macros for the LAN91C111 Ethernet Driver + . + . (C) Copyright 2002 + . Sysgo Real-Time Solutions, GmbH <www.elinos.com> + . Rolf Offermanns <rof@sysgo.de> + . Copyright (C) 2001 Standard Microsystems Corporation (SMSC) + . Developed by Simple Network Magic Corporation (SNMC) + . Copyright (C) 1996 by Erik Stahlman (ES) + . + . This program is free software; you can redistribute it and/or modify + . it under the terms of the GNU General Public License as published by + . the Free Software Foundation; either version 2 of the License, or + . (at your option) any later version. + . + . This program is distributed in the hope that it will be useful, + . but WITHOUT ANY WARRANTY; without even the implied warranty of + . MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + . GNU General Public License for more details. + . + . You should have received a copy of the GNU General Public License + . along with this program; if not, write to the Free Software + . Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + . + . This file contains register information and access macros for + . the LAN91C111 single chip ethernet controller. It is a modified + . version of the smc9194.h file. + . + . Information contained in this file was obtained from the LAN91C111 + . manual from SMC. To get a copy, if you really want one, you can find + . information under www.smsc.com. + . + . Authors + . Erik Stahlman ( erik@vt.edu ) + . Daris A Nevil ( dnevil@snmc.com ) + . + . History + . 03/16/01 Daris A Nevil Modified for use with LAN91C111 device + . + ---------------------------------------------------------------------------*/ +#ifndef _SMC91111_H_ +#define _SMC91111_H_ + +#include <asm/types.h> +#include <config.h> + +/* + * This function may be called by the board specific initialisation code + * in order to override the default mac address. + */ + +void smc_set_mac_addr(const char *addr); + + +/* I want some simple types */ + +typedef unsigned char byte; +typedef unsigned short word; +typedef unsigned long int dword; + +/* + . DEBUGGING LEVELS + . + . 0 for normal operation + . 1 for slightly more details + . >2 for various levels of increasingly useless information + . 2 for interrupt tracking, status flags + . 3 for packet info + . 4 for complete packet dumps +*/ +/*#define SMC_DEBUG 0 */ + +/* Because of bank switching, the LAN91xxx uses only 16 I/O ports */ + +#define SMC_IO_EXTENT 16 + +#ifdef CONFIG_PXA250 + +#define SMC_inl(r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r)))) +#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+(r)))) +#define SMC_inb(p) ({ \ + unsigned int __p = (unsigned int)(SMC_BASE_ADDRESS + (p)); \ + unsigned int __v = *(volatile unsigned short *)((SMC_BASE_ADDRESS + __p) & ~1); \ + if (__p & 1) __v >>= 8; \ + else __v &= 0xff; \ + __v; }) + +#define SMC_outl(d,r) (*((volatile dword *)(SMC_BASE_ADDRESS+(r))) = d) +#define SMC_outw(d,r) (*((volatile word *)(SMC_BASE_ADDRESS+(r))) = d) +#define SMC_outb(d,r) ({ word __d = (byte)(d); \ + word __w = SMC_inw((r)&~1); \ + __w &= ((r)&1) ? 0x00FF : 0xFF00; \ + __w |= ((r)&1) ? __d<<8 : __d; \ + SMC_outw(__w,(r)&~1); \ + }) + +#define SMC_outsl(r,b,l) ({ int __i; \ + dword *__b2; \ + __b2 = (dword *) b; \ + for (__i = 0; __i < l; __i++) { \ + SMC_outl( *(__b2 + __i), r); \ + } \ + }) + +#define SMC_outsw(r,b,l) ({ int __i; \ + word *__b2; \ + __b2 = (word *) b; \ + for (__i = 0; __i < l; __i++) { \ + SMC_outw( *(__b2 + __i), r); \ + } \ + }) + +#define SMC_insl(r,b,l) ({ int __i ; \ + dword *__b2; \ + __b2 = (dword *) b; \ + for (__i = 0; __i < l; __i++) { \ + *(__b2 + __i) = SMC_inl(r); \ + SMC_inl(0); \ + }; \ + }) + +#define SMC_insw(r,b,l) ({ int __i ; \ + word *__b2; \ + __b2 = (word *) b; \ + for (__i = 0; __i < l; __i++) { \ + *(__b2 + __i) = SMC_inw(r); \ + SMC_inw(0); \ + }; \ + }) + +#define SMC_insb(r,b,l) ({ int __i ; \ + byte *__b2; \ + __b2 = (byte *) b; \ + for (__i = 0; __i < l; __i++) { \ + *(__b2 + __i) = SMC_inb(r); \ + SMC_inb(0); \ + }; \ + }) + +#else /* if not CONFIG_PXA250 */ + +/* + * We have only 16 Bit PCMCIA access on Socket 0 + */ + +#define SMC_inw(r) (*((volatile word *)(SMC_BASE_ADDRESS+(r)))) +#define SMC_inb(r) (((r)&1) ? SMC_inw((r)&~1)>>8 : SMC_inw(r)&0xFF) + +#define SMC_outw(d,r) (*((volatile word *)(SMC_BASE_ADDRESS+(r))) = d) +#define SMC_outb(d,r) ({ word __d = (byte)(d); \ + word __w = SMC_inw((r)&~1); \ + __w &= ((r)&1) ? 0x00FF : 0xFF00; \ + __w |= ((r)&1) ? __d<<8 : __d; \ + SMC_outw(__w,(r)&~1); \ + }) +#if 0 +#define SMC_outsw(r,b,l) outsw(SMC_BASE_ADDRESS+(r), (b), (l)) +#else +#define SMC_outsw(r,b,l) ({ int __i; \ + word *__b2; \ + __b2 = (word *) b; \ + for (__i = 0; __i < l; __i++) { \ + SMC_outw( *(__b2 + __i), r); \ + } \ + }) +#endif + +#if 0 +#define SMC_insw(r,b,l) insw(SMC_BASE_ADDRESS+(r), (b), (l)) +#else +#define SMC_insw(r,b,l) ({ int __i ; \ + word *__b2; \ + __b2 = (word *) b; \ + for (__i = 0; __i < l; __i++) { \ + *(__b2 + __i) = SMC_inw(r); \ + SMC_inw(0); \ + }; \ + }) +#endif + +#endif + +/*--------------------------------------------------------------- + . + . A description of the SMSC registers is probably in order here, + . although for details, the SMC datasheet is invaluable. + . + . Basically, the chip has 4 banks of registers ( 0 to 3 ), which + . are accessed by writing a number into the BANK_SELECT register + . ( I also use a SMC_SELECT_BANK macro for this ). + . + . The banks are configured so that for most purposes, bank 2 is all + . that is needed for simple run time tasks. + -----------------------------------------------------------------------*/ + +/* + . Bank Select Register: + . + . yyyy yyyy 0000 00xx + . xx = bank number + . yyyy yyyy = 0x33, for identification purposes. +*/ +#define BANK_SELECT 14 + +/* Transmit Control Register */ +/* BANK 0 */ +#define TCR_REG 0x0000 /* transmit control register */ +#define TCR_ENABLE 0x0001 /* When 1 we can transmit */ +#define TCR_LOOP 0x0002 /* Controls output pin LBK */ +#define TCR_FORCOL 0x0004 /* When 1 will force a collision */ +#define TCR_PAD_EN 0x0080 /* When 1 will pad tx frames < 64 bytes w/0 */ +#define TCR_NOCRC 0x0100 /* When 1 will not append CRC to tx frames */ +#define TCR_MON_CSN 0x0400 /* When 1 tx monitors carrier */ +#define TCR_FDUPLX 0x0800 /* When 1 enables full duplex operation */ +#define TCR_STP_SQET 0x1000 /* When 1 stops tx if Signal Quality Error */ +#define TCR_EPH_LOOP 0x2000 /* When 1 enables EPH block loopback */ +#define TCR_SWFDUP 0x8000 /* When 1 enables Switched Full Duplex mode */ + +#define TCR_CLEAR 0 /* do NOTHING */ +/* the default settings for the TCR register : */ +/* QUESTION: do I want to enable padding of short packets ? */ +#define TCR_DEFAULT TCR_ENABLE + + +/* EPH Status Register */ +/* BANK 0 */ +#define EPH_STATUS_REG 0x0002 +#define ES_TX_SUC 0x0001 /* Last TX was successful */ +#define ES_SNGL_COL 0x0002 /* Single collision detected for last tx */ +#define ES_MUL_COL 0x0004 /* Multiple collisions detected for last tx */ +#define ES_LTX_MULT 0x0008 /* Last tx was a multicast */ +#define ES_16COL 0x0010 /* 16 Collisions Reached */ +#define ES_SQET 0x0020 /* Signal Quality Error Test */ +#define ES_LTXBRD 0x0040 /* Last tx was a broadcast */ +#define ES_TXDEFR 0x0080 /* Transmit Deferred */ +#define ES_LATCOL 0x0200 /* Late collision detected on last tx */ +#define ES_LOSTCARR 0x0400 /* Lost Carrier Sense */ +#define ES_EXC_DEF 0x0800 /* Excessive Deferral */ +#define ES_CTR_ROL 0x1000 /* Counter Roll Over indication */ +#define ES_LINK_OK 0x4000 /* Driven by inverted value of nLNK pin */ +#define ES_TXUNRN 0x8000 /* Tx Underrun */ + + +/* Receive Control Register */ +/* BANK 0 */ +#define RCR_REG 0x0004 +#define RCR_RX_ABORT 0x0001 /* Set if a rx frame was aborted */ +#define RCR_PRMS 0x0002 /* Enable promiscuous mode */ +#define RCR_ALMUL 0x0004 /* When set accepts all multicast frames */ +#define RCR_RXEN 0x0100 /* IFF this is set, we can receive packets */ +#define RCR_STRIP_CRC 0x0200 /* When set strips CRC from rx packets */ +#define RCR_ABORT_ENB 0x0200 /* When set will abort rx on collision */ +#define RCR_FILT_CAR 0x0400 /* When set filters leading 12 bit s of carrier */ +#define RCR_SOFTRST 0x8000 /* resets the chip */ + +/* the normal settings for the RCR register : */ +#define RCR_DEFAULT (RCR_STRIP_CRC | RCR_RXEN) +#define RCR_CLEAR 0x0 /* set it to a base state */ + +/* Counter Register */ +/* BANK 0 */ +#define COUNTER_REG 0x0006 + +/* Memory Information Register */ +/* BANK 0 */ +#define MIR_REG 0x0008 + +/* Receive/Phy Control Register */ +/* BANK 0 */ +#define RPC_REG 0x000A +#define RPC_SPEED 0x2000 /* When 1 PHY is in 100Mbps mode. */ +#define RPC_DPLX 0x1000 /* When 1 PHY is in Full-Duplex Mode */ +#define RPC_ANEG 0x0800 /* When 1 PHY is in Auto-Negotiate Mode */ +#define RPC_LSXA_SHFT 5 /* Bits to shift LS2A,LS1A,LS0A to lsb */ +#define RPC_LSXB_SHFT 2 /* Bits to get LS2B,LS1B,LS0B to lsb */ +#define RPC_LED_100_10 (0x00) /* LED = 100Mbps OR's with 10Mbps link detect */ +#define RPC_LED_RES (0x01) /* LED = Reserved */ +#define RPC_LED_10 (0x02) /* LED = 10Mbps link detect */ +#define RPC_LED_FD (0x03) /* LED = Full Duplex Mode */ +#define RPC_LED_TX_RX (0x04) /* LED = TX or RX packet occurred */ +#define RPC_LED_100 (0x05) /* LED = 100Mbps link dectect */ +#define RPC_LED_TX (0x06) /* LED = TX packet occurred */ +#define RPC_LED_RX (0x07) /* LED = RX packet occurred */ +#define RPC_DEFAULT (RPC_ANEG | (RPC_LED_100 << RPC_LSXA_SHFT) | (RPC_LED_FD << RPC_LSXB_SHFT) | RPC_SPEED | RPC_DPLX) + +/* Bank 0 0x000C is reserved */ + +/* Bank Select Register */ +/* All Banks */ +#define BSR_REG 0x000E + + +/* Configuration Reg */ +/* BANK 1 */ +#define CONFIG_REG 0x0000 +#define CONFIG_EXT_PHY 0x0200 /* 1=external MII, 0=internal Phy */ +#define CONFIG_GPCNTRL 0x0400 /* Inverse value drives pin nCNTRL */ +#define CONFIG_NO_WAIT 0x1000 /* When 1 no extra wait states on ISA bus */ +#define CONFIG_EPH_POWER_EN 0x8000 /* When 0 EPH is placed into low power mode. */ + +/* Default is powered-up, Internal Phy, Wait States, and pin nCNTRL=low */ +#define CONFIG_DEFAULT (CONFIG_EPH_POWER_EN) + + +/* Base Address Register */ +/* BANK 1 */ +#define BASE_REG 0x0002 + + +/* Individual Address Registers */ +/* BANK 1 */ +#define ADDR0_REG 0x0004 +#define ADDR1_REG 0x0006 +#define ADDR2_REG 0x0008 + + +/* General Purpose Register */ +/* BANK 1 */ +#define GP_REG 0x000A + + +/* Control Register */ +/* BANK 1 */ +#define CTL_REG 0x000C +#define CTL_RCV_BAD 0x4000 /* When 1 bad CRC packets are received */ +#define CTL_AUTO_RELEASE 0x0800 /* When 1 tx pages are released automatically */ +#define CTL_LE_ENABLE 0x0080 /* When 1 enables Link Error interrupt */ +#define CTL_CR_ENABLE 0x0040 /* When 1 enables Counter Rollover interrupt */ +#define CTL_TE_ENABLE 0x0020 /* When 1 enables Transmit Error interrupt */ +#define CTL_EEPROM_SELECT 0x0004 /* Controls EEPROM reload & store */ +#define CTL_RELOAD 0x0002 /* When set reads EEPROM into registers */ +#define CTL_STORE 0x0001 /* When set stores registers into EEPROM */ +#define CTL_DEFAULT (0x1210) + +/* MMU Command Register */ +/* BANK 2 */ +#define MMU_CMD_REG 0x0000 +#define MC_BUSY 1 /* When 1 the last release has not completed */ +#define MC_NOP (0<<5) /* No Op */ +#define MC_ALLOC (1<<5) /* OR with number of 256 byte packets */ +#define MC_RESET (2<<5) /* Reset MMU to initial state */ +#define MC_REMOVE (3<<5) /* Remove the current rx packet */ +#define MC_RELEASE (4<<5) /* Remove and release the current rx packet */ +#define MC_FREEPKT (5<<5) /* Release packet in PNR register */ +#define MC_ENQUEUE (6<<5) /* Enqueue the packet for transmit */ +#define MC_RSTTXFIFO (7<<5) /* Reset the TX FIFOs */ + + +/* Packet Number Register */ +/* BANK 2 */ +#define PN_REG 0x0002 + + +/* Allocation Result Register */ +/* BANK 2 */ +#define AR_REG 0x0003 +#define AR_FAILED 0x80 /* Alocation Failed */ + + +/* RX FIFO Ports Register */ +/* BANK 2 */ +#define RXFIFO_REG 0x0004 /* Must be read as a word */ +#define RXFIFO_REMPTY 0x8000 /* RX FIFO Empty */ + + +/* TX FIFO Ports Register */ +/* BANK 2 */ +#define TXFIFO_REG RXFIFO_REG /* Must be read as a word */ +#define TXFIFO_TEMPTY 0x80 /* TX FIFO Empty */ + + +/* Pointer Register */ +/* BANK 2 */ +#define PTR_REG 0x0006 +#define PTR_RCV 0x8000 /* 1=Receive area, 0=Transmit area */ +#define PTR_AUTOINC 0x4000 /* Auto increment the pointer on each access */ +#define PTR_READ 0x2000 /* When 1 the operation is a read */ + + +/* Data Register */ +/* BANK 2 */ +#define SMC91111_DATA_REG 0x0008 + + +/* Interrupt Status/Acknowledge Register */ +/* BANK 2 */ +#define SMC91111_INT_REG 0x000C + + +/* Interrupt Mask Register */ +/* BANK 2 */ +#define IM_REG 0x000D +#define IM_MDINT 0x80 /* PHY MI Register 18 Interrupt */ +#define IM_ERCV_INT 0x40 /* Early Receive Interrupt */ +#define IM_EPH_INT 0x20 /* Set by Etheret Protocol Handler section */ +#define IM_RX_OVRN_INT 0x10 /* Set by Receiver Overruns */ +#define IM_ALLOC_INT 0x08 /* Set when allocation request is completed */ +#define IM_TX_EMPTY_INT 0x04 /* Set if the TX FIFO goes empty */ +#define IM_TX_INT 0x02 /* Transmit Interrrupt */ +#define IM_RCV_INT 0x01 /* Receive Interrupt */ + + +/* Multicast Table Registers */ +/* BANK 3 */ +#define MCAST_REG1 0x0000 +#define MCAST_REG2 0x0002 +#define MCAST_REG3 0x0004 +#define MCAST_REG4 0x0006 + + +/* Management Interface Register (MII) */ +/* BANK 3 */ +#define MII_REG 0x0008 +#define MII_MSK_CRS100 0x4000 /* Disables CRS100 detection during tx half dup */ +#define MII_MDOE 0x0008 /* MII Output Enable */ +#define MII_MCLK 0x0004 /* MII Clock, pin MDCLK */ +#define MII_MDI 0x0002 /* MII Input, pin MDI */ +#define MII_MDO 0x0001 /* MII Output, pin MDO */ + + +/* Revision Register */ +/* BANK 3 */ +#define REV_REG 0x000A /* ( hi: chip id low: rev # ) */ + + +/* Early RCV Register */ +/* BANK 3 */ +/* this is NOT on SMC9192 */ +#define ERCV_REG 0x000C +#define ERCV_RCV_DISCRD 0x0080 /* When 1 discards a packet being received */ +#define ERCV_THRESHOLD 0x001F /* ERCV Threshold Mask */ + +/* External Register */ +/* BANK 7 */ +#define EXT_REG 0x0000 + + +#define CHIP_9192 3 +#define CHIP_9194 4 +#define CHIP_9195 5 +#define CHIP_9196 6 +#define CHIP_91100 7 +#define CHIP_91100FD 8 +#define CHIP_91111FD 9 + +#if 0 +static const char * chip_ids[ 15 ] = { + NULL, NULL, NULL, + /* 3 */ "SMC91C90/91C92", + /* 4 */ "SMC91C94", + /* 5 */ "SMC91C95", + /* 6 */ "SMC91C96", + /* 7 */ "SMC91C100", + /* 8 */ "SMC91C100FD", + /* 9 */ "SMC91C111", + NULL, NULL, + NULL, NULL, NULL}; +#endif + +/* + . Transmit status bits +*/ +#define TS_SUCCESS 0x0001 +#define TS_LOSTCAR 0x0400 +#define TS_LATCOL 0x0200 +#define TS_16COL 0x0010 + +/* + . Receive status bits +*/ +#define RS_ALGNERR 0x8000 +#define RS_BRODCAST 0x4000 +#define RS_BADCRC 0x2000 +#define RS_ODDFRAME 0x1000 /* bug: the LAN91C111 never sets this on receive */ +#define RS_TOOLONG 0x0800 +#define RS_TOOSHORT 0x0400 +#define RS_MULTICAST 0x0001 +#define RS_ERRORS (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT) + + +/* PHY Types */ +enum { + PHY_LAN83C183 = 1, /* LAN91C111 Internal PHY */ + PHY_LAN83C180 +}; + + +/* PHY Register Addresses (LAN91C111 Internal PHY) */ + +/* PHY Control Register */ +#define PHY_CNTL_REG 0x00 +#define PHY_CNTL_RST 0x8000 /* 1=PHY Reset */ +#define PHY_CNTL_LPBK 0x4000 /* 1=PHY Loopback */ +#define PHY_CNTL_SPEED 0x2000 /* 1=100Mbps, 0=10Mpbs */ +#define PHY_CNTL_ANEG_EN 0x1000 /* 1=Enable Auto negotiation */ +#define PHY_CNTL_PDN 0x0800 /* 1=PHY Power Down mode */ +#define PHY_CNTL_MII_DIS 0x0400 /* 1=MII 4 bit interface disabled */ +#define PHY_CNTL_ANEG_RST 0x0200 /* 1=Reset Auto negotiate */ +#define PHY_CNTL_DPLX 0x0100 /* 1=Full Duplex, 0=Half Duplex */ +#define PHY_CNTL_COLTST 0x0080 /* 1= MII Colision Test */ + +/* PHY Status Register */ +#define PHY_STAT_REG 0x01 +#define PHY_STAT_CAP_T4 0x8000 /* 1=100Base-T4 capable */ +#define PHY_STAT_CAP_TXF 0x4000 /* 1=100Base-X full duplex capable */ +#define PHY_STAT_CAP_TXH 0x2000 /* 1=100Base-X half duplex capable */ +#define PHY_STAT_CAP_TF 0x1000 /* 1=10Mbps full duplex capable */ +#define PHY_STAT_CAP_TH 0x0800 /* 1=10Mbps half duplex capable */ +#define PHY_STAT_CAP_SUPR 0x0040 /* 1=recv mgmt frames with not preamble */ +#define PHY_STAT_ANEG_ACK 0x0020 /* 1=ANEG has completed */ +#define PHY_STAT_REM_FLT 0x0010 /* 1=Remote Fault detected */ +#define PHY_STAT_CAP_ANEG 0x0008 /* 1=Auto negotiate capable */ +#define PHY_STAT_LINK 0x0004 /* 1=valid link */ +#define PHY_STAT_JAB 0x0002 /* 1=10Mbps jabber condition */ +#define PHY_STAT_EXREG 0x0001 /* 1=extended registers implemented */ + +/* PHY Identifier Registers */ +#define PHY_ID1_REG 0x02 /* PHY Identifier 1 */ +#define PHY_ID2_REG 0x03 /* PHY Identifier 2 */ + +/* PHY Auto-Negotiation Advertisement Register */ +#define PHY_AD_REG 0x04 +#define PHY_AD_NP 0x8000 /* 1=PHY requests exchange of Next Page */ +#define PHY_AD_ACK 0x4000 /* 1=got link code word from remote */ +#define PHY_AD_RF 0x2000 /* 1=advertise remote fault */ +#define PHY_AD_T4 0x0200 /* 1=PHY is capable of 100Base-T4 */ +#define PHY_AD_TX_FDX 0x0100 /* 1=PHY is capable of 100Base-TX FDPLX */ +#define PHY_AD_TX_HDX 0x0080 /* 1=PHY is capable of 100Base-TX HDPLX */ +#define PHY_AD_10_FDX 0x0040 /* 1=PHY is capable of 10Base-T FDPLX */ +#define PHY_AD_10_HDX 0x0020 /* 1=PHY is capable of 10Base-T HDPLX */ +#define PHY_AD_CSMA 0x0001 /* 1=PHY is capable of 802.3 CMSA */ + +/* PHY Auto-negotiation Remote End Capability Register */ +#define PHY_RMT_REG 0x05 +/* Uses same bit definitions as PHY_AD_REG */ + +/* PHY Configuration Register 1 */ +#define PHY_CFG1_REG 0x10 +#define PHY_CFG1_LNKDIS 0x8000 /* 1=Rx Link Detect Function disabled */ +#define PHY_CFG1_XMTDIS 0x4000 /* 1=TP Transmitter Disabled */ +#define PHY_CFG1_XMTPDN 0x2000 /* 1=TP Transmitter Powered Down */ +#define PHY_CFG1_BYPSCR 0x0400 /* 1=Bypass scrambler/descrambler */ +#define PHY_CFG1_UNSCDS 0x0200 /* 1=Unscramble Idle Reception Disable */ +#define PHY_CFG1_EQLZR 0x0100 /* 1=Rx Equalizer Disabled */ +#define PHY_CFG1_CABLE 0x0080 /* 1=STP(150ohm), 0=UTP(100ohm) */ +#define PHY_CFG1_RLVL0 0x0040 /* 1=Rx Squelch level reduced by 4.5db */ +#define PHY_CFG1_TLVL_SHIFT 2 /* Transmit Output Level Adjust */ +#define PHY_CFG1_TLVL_MASK 0x003C +#define PHY_CFG1_TRF_MASK 0x0003 /* Transmitter Rise/Fall time */ + + +/* PHY Configuration Register 2 */ +#define PHY_CFG2_REG 0x11 +#define PHY_CFG2_APOLDIS 0x0020 /* 1=Auto Polarity Correction disabled */ +#define PHY_CFG2_JABDIS 0x0010 /* 1=Jabber disabled */ +#define PHY_CFG2_MREG 0x0008 /* 1=Multiple register access (MII mgt) */ +#define PHY_CFG2_INTMDIO 0x0004 /* 1=Interrupt signaled with MDIO pulseo */ + +/* PHY Status Output (and Interrupt status) Register */ +#define PHY_INT_REG 0x12 /* Status Output (Interrupt Status) */ +#define PHY_INT_INT 0x8000 /* 1=bits have changed since last read */ +#define PHY_INT_LNKFAIL 0x4000 /* 1=Link Not detected */ +#define PHY_INT_LOSSSYNC 0x2000 /* 1=Descrambler has lost sync */ +#define PHY_INT_CWRD 0x1000 /* 1=Invalid 4B5B code detected on rx */ +#define PHY_INT_SSD 0x0800 /* 1=No Start Of Stream detected on rx */ +#define PHY_INT_ESD 0x0400 /* 1=No End Of Stream detected on rx */ +#define PHY_INT_RPOL 0x0200 /* 1=Reverse Polarity detected */ +#define PHY_INT_JAB 0x0100 /* 1=Jabber detected */ +#define PHY_INT_SPDDET 0x0080 /* 1=100Base-TX mode, 0=10Base-T mode */ +#define PHY_INT_DPLXDET 0x0040 /* 1=Device in Full Duplex */ + +/* PHY Interrupt/Status Mask Register */ +#define PHY_MASK_REG 0x13 /* Interrupt Mask */ +/* Uses the same bit definitions as PHY_INT_REG */ + + + +/*------------------------------------------------------------------------- + . I define some macros to make it easier to do somewhat common + . or slightly complicated, repeated tasks. + --------------------------------------------------------------------------*/ + +/* select a register bank, 0 to 3 */ + +#define SMC_SELECT_BANK(x) { SMC_outw( x, BANK_SELECT ); } + +/* this enables an interrupt in the interrupt mask register */ +#define SMC_ENABLE_INT(x) {\ + unsigned char mask;\ + SMC_SELECT_BANK(2);\ + mask = SMC_inb( IM_REG );\ + mask |= (x);\ + SMC_outb( mask, IM_REG ); \ +} + +/* this disables an interrupt from the interrupt mask register */ + +#define SMC_DISABLE_INT(x) {\ + unsigned char mask;\ + SMC_SELECT_BANK(2);\ + mask = SMC_inb( IM_REG );\ + mask &= ~(x);\ + SMC_outb( mask, IM_REG ); \ +} + +/*---------------------------------------------------------------------- + . Define the interrupts that I want to receive from the card + . + . I want: + . IM_EPH_INT, for nasty errors + . IM_RCV_INT, for happy received packets + . IM_RX_OVRN_INT, because I have to kick the receiver + . IM_MDINT, for PHY Register 18 Status Changes + --------------------------------------------------------------------------*/ +#define SMC_INTERRUPT_MASK (IM_EPH_INT | IM_RX_OVRN_INT | IM_RCV_INT | \ + IM_MDINT) + +#endif /* _SMC_91111_H_ */ + |