diff options
Diffstat (limited to 'drivers/usb/host/r8a66597-hcd.c')
| -rw-r--r-- | drivers/usb/host/r8a66597-hcd.c | 47 |
1 files changed, 47 insertions, 0 deletions
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 6ef51906c2..28d2bc8454 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -82,6 +82,7 @@ static int r8a66597_clock_enable(struct r8a66597 *r8a66597) } } while ((tmp & USBE) != USBE); r8a66597_bclr(r8a66597, USBE, SYSCFG0); +#if !defined(CONFIG_RZA_USB) r8a66597_mdfy(r8a66597, CONFIG_R8A66597_XTAL, XTAL, SYSCFG0); i = 0; @@ -94,6 +95,20 @@ static int r8a66597_clock_enable(struct r8a66597 *r8a66597) return -1; } } while ((tmp & SCKE) != SCKE); +#else + /* + * RZ/A Only: + * Bits XTAL(UCKSEL) and UPLLE in SYSCFG0 for USB0 controls both USB0 + * and USB1, so we must always set the USB0 register + */ +#if (CONFIG_R8A66597_XTAL == 1) + setbits(le16, R8A66597_BASE0, XTAL); +#endif + mdelay(1); + setbits(le16, R8A66597_BASE0, UPLLE); + mdelay(1); + r8a66597_bset(r8a66597, SUSPM, SUSPMODE0); +#endif /* CONFIG_RZA_USB */ #endif /* #if defined(CONFIG_SUPERH_ON_CHIP_R8A66597) */ return 0; @@ -101,6 +116,7 @@ static int r8a66597_clock_enable(struct r8a66597 *r8a66597) static void r8a66597_clock_disable(struct r8a66597 *r8a66597) { +#if !defined(CONFIG_RZA_USB) r8a66597_bclr(r8a66597, SCKE, SYSCFG0); udelay(1); #if !defined(CONFIG_SUPERH_ON_CHIP_R8A66597) @@ -108,6 +124,15 @@ static void r8a66597_clock_disable(struct r8a66597 *r8a66597) r8a66597_bclr(r8a66597, XCKE, SYSCFG0); r8a66597_bclr(r8a66597, USBE, SYSCFG0); #endif +#else + r8a66597_bclr(r8a66597, SUSPM, SUSPMODE0); + + clrbits(le16, R8A66597_BASE0, UPLLE); + mdelay(1); + r8a66597_bclr(r8a66597, USBE, SYSCFG0); + mdelay(1); + +#endif } static void r8a66597_enable_port(struct r8a66597 *r8a66597, int port) @@ -118,7 +143,9 @@ static void r8a66597_enable_port(struct r8a66597 *r8a66597, int port) r8a66597_bset(r8a66597, val, get_syscfg_reg(port)); r8a66597_bset(r8a66597, HSE, get_syscfg_reg(port)); +#if !defined(CONFIG_RZA_USB) r8a66597_write(r8a66597, BURST | CPU_ADR_RD_WR, get_dmacfg_reg(port)); +#endif } static void r8a66597_disable_port(struct r8a66597 *r8a66597, int port) @@ -148,7 +175,9 @@ static int enable_controller(struct r8a66597 *r8a66597) if (ret < 0) return ret; +#if !defined(CONFIG_RZA_USB) r8a66597_bset(r8a66597, CONFIG_R8A66597_LDRV & LDRV, PINCFG); +#endif r8a66597_bset(r8a66597, USBE, SYSCFG0); r8a66597_bset(r8a66597, INTL, SOFCFG); @@ -266,12 +295,30 @@ static int send_setup_packet(struct r8a66597 *r8a66597, struct usb_device *dev, unsigned long setup_addr = USBREQ; u16 intsts1; int timeout = 3000; +#if defined(CONFIG_RZA_USB) + u16 dcpctr; + int timeout2 = 10000; +#endif u16 devsel = setup->request == USB_REQ_SET_ADDRESS ? 0 : dev->devnum; r8a66597_write(r8a66597, make_devsel(devsel) | (8 << dev->maxpacketsize), DCPMAXP); r8a66597_write(r8a66597, ~(SIGN | SACK), INTSTS1); +#if defined(CONFIG_RZA_USB) + dcpctr = r8a66597_read(r8a66597, DCPCTR); + if ((dcpctr & PID) == PID_BUF) { + timeout2 = 10000; + while (!(dcpctr & BSTS)) { + dcpctr = r8a66597_read(r8a66597, DCPCTR); + if (timeout2-- < 0) { + printf("DCPCTR clear timeout!\n"); + break; + } + } + } +#endif + for (i = 0; i < 4; i++) { r8a66597_write(r8a66597, le16_to_cpu(p[i]), setup_addr); setup_addr += 2; |