diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/mtd/nand/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/net/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/serial/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/thermal/Kconfig | 13 |
4 files changed, 34 insertions, 0 deletions
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 5ce7d6d06c..df154bfd32 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -80,6 +80,13 @@ config NAND_ARASAN controller. This uses the hardware ECC for read and write operations. +config NAND_MXS + bool "MXS NAND support" + depends on MX6 + help + This enables NAND driver for the NAND flash controller on the + MXS processors. + comment "Generic NAND options" # Enhance depends when converting drivers to Kconfig which use this config diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 302c005aa1..7b9961de47 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -129,6 +129,13 @@ config ETHOC help This MAC is present in OpenRISC and Xtensa XTFPGA boards. +config FEC_MXC + bool "FEC Ethernet controller" + depends on MX6 + help + This driver supports the 10/100 Fast Ethernet controller for + NXP i.MX processors. + config MVPP2 bool "Marvell Armada 375 network interface support" depends on ARMADA_375 diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 541cf2e512..317d15849d 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -309,6 +309,13 @@ config MVEBU_A3700_UART Choose this option to add support for UART driver on the Marvell Armada 3700 SoC. The base address is configured via DT. +config MXC_UART + bool "IMX serial port support" + depends on MX6 + help + If you have a machine based on a Motorola IMX CPU you + can enable its onboard serial port by enabling this option. + config PIC32_SERIAL bool "Support for Microchip PIC32 on-chip UART" depends on DM_SERIAL && MACH_PIC32 diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 8e22ea7060..f0ffbb3083 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -5,3 +5,16 @@ config DM_THERMAL temperature sensors to permit warnings, speed throttling or even automatic power-off when the temperature gets too high or low. Other devices may be discrete but connected on a suitable bus. + +if DM_THERMAL + +config IMX_THERMAL + bool "Temperature sensor driver for Freescale i.MX SoCs" + depends on MX6 + help + Support for Temperature Monitor (TEMPMON) found on Freescale i.MX SoCs. + It supports one critical trip point and one passive trip point. The + cpufreq is used as the cooling device to throttle CPUs when the + passive trip is crossed. + +endif # if DM_THERMAL |