diff options
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/gpio/s3c2440_gpio.c | 6 | ||||
-rw-r--r-- | drivers/gpio/s5p_gpio.c | 9 | ||||
-rw-r--r-- | drivers/i2c/s3c24x0_i2c.c | 3 | ||||
-rw-r--r-- | drivers/power/battery/bat_trats.c | 13 | ||||
-rw-r--r-- | drivers/power/power_core.c | 3 | ||||
-rw-r--r-- | drivers/serial/serial_s5p.c | 78 | ||||
-rw-r--r-- | drivers/video/exynos_fimd.c | 3 |
7 files changed, 97 insertions, 18 deletions
diff --git a/drivers/gpio/s3c2440_gpio.c b/drivers/gpio/s3c2440_gpio.c index 43bbf1160c..09b04eb94a 100644 --- a/drivers/gpio/s3c2440_gpio.c +++ b/drivers/gpio/s3c2440_gpio.c @@ -61,7 +61,7 @@ int gpio_set_value(unsigned gpio, int value) else l &= ~bit; - return writel(port, l); + return writel(l, port); } int gpio_get_value(unsigned gpio) @@ -85,11 +85,11 @@ int gpio_free(unsigned gpio) int gpio_direction_input(unsigned gpio) { - return writel(GPIO_FULLPORT(gpio), GPIO_INPUT << GPIO_BIT(gpio)); + return writel(GPIO_INPUT << GPIO_BIT(gpio), GPIO_FULLPORT(gpio)); } int gpio_direction_output(unsigned gpio, int value) { - writel(GPIO_FULLPORT(gpio), GPIO_OUTPUT << GPIO_BIT(gpio)); + writel(GPIO_OUTPUT << GPIO_BIT(gpio), GPIO_FULLPORT(gpio)); return gpio_set_value(gpio, value); } diff --git a/drivers/gpio/s5p_gpio.c b/drivers/gpio/s5p_gpio.c index 656bf4a06c..4efb768551 100644 --- a/drivers/gpio/s5p_gpio.c +++ b/drivers/gpio/s5p_gpio.c @@ -48,15 +48,8 @@ void s5p_gpio_cfg_pin(struct s5p_gpio_bank *bank, int gpio, int cfg) void s5p_gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en) { - unsigned int value; - s5p_gpio_cfg_pin(bank, gpio, GPIO_OUTPUT); - - value = readl(&bank->dat); - value &= ~DAT_MASK(gpio); - if (en) - value |= DAT_SET(gpio); - writel(value, &bank->dat); + s5p_gpio_set_value(bank, gpio, en); } void s5p_gpio_direction_input(struct s5p_gpio_bank *bank, int gpio) diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c index 46d25061ee..382e4c2ecf 100644 --- a/drivers/i2c/s3c24x0_i2c.c +++ b/drivers/i2c/s3c24x0_i2c.c @@ -518,8 +518,9 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) #ifdef CONFIG_OF_CONTROL void board_i2c_init(const void *blob) { + int i; int node_list[CONFIG_MAX_I2C_NUM]; - int count, i; + int count; count = fdtdec_find_aliases_for_id(blob, "i2c", COMPAT_SAMSUNG_S3C2440_I2C, node_list, diff --git a/drivers/power/battery/bat_trats.c b/drivers/power/battery/bat_trats.c index ca0d214659..97a9661150 100644 --- a/drivers/power/battery/bat_trats.c +++ b/drivers/power/battery/bat_trats.c @@ -41,18 +41,23 @@ static int power_battery_charge(struct pmic *bat) for (k = 0; bat->chrg->chrg_bat_present(p_bat->chrg) && bat->chrg->chrg_type(p_bat->muic) && battery->state_of_chrg < 100; k++) { - udelay(10000000); - puts("."); + udelay(2000000); + if (!(k % 5)) + puts("."); bat->fg->fg_battery_update(p_bat->fg, bat); - if (k == 100) { + if (k == 200) { debug(" %d [V]", battery->voltage_uV); puts("\n"); k = 0; } + if (ctrlc()) { + printf("\nCharging disabled on request.\n"); + goto exit; + } } - + exit: bat->chrg->chrg_state(p_bat->chrg, CHARGER_DISABLE, 0); return 0; diff --git a/drivers/power/power_core.c b/drivers/power/power_core.c index 90df2c58c4..f16b9dc066 100644 --- a/drivers/power/power_core.c +++ b/drivers/power/power_core.c @@ -205,7 +205,8 @@ int do_pmic(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (strcmp(argv[3], "charge") == 0) { if (p->pbat) { - printf("PRINT BAT charge %s\n", p->name); + printf("BAT: %s charging (ctrl+c to break)\n", + p->name); if (p->low_power_mode) p->low_power_mode(); if (p->pbat->battery_charge) diff --git a/drivers/serial/serial_s5p.c b/drivers/serial/serial_s5p.c index e65125ccd7..6836c7a225 100644 --- a/drivers/serial/serial_s5p.c +++ b/drivers/serial/serial_s5p.c @@ -22,6 +22,7 @@ */ #include <common.h> +#include <fdtdec.h> #include <linux/compiler.h> #include <asm/io.h> #include <asm/arch/uart.h> @@ -34,10 +35,21 @@ DECLARE_GLOBAL_DATA_PTR; #define RX_FIFO_FULL_MASK (1 << 8) #define TX_FIFO_FULL_MASK (1 << 24) +/* Information about a serial port */ +struct fdt_serial { + u32 base_addr; /* address of registers in physical memory */ + u8 port_id; /* uart port number */ + u8 enabled; /* 1 if enabled, 0 if disabled */ +} config __attribute__ ((section(".data"))); + static inline struct s5p_uart *s5p_get_base_uart(int dev_index) { +#ifdef CONFIG_OF_CONTROL + return (struct s5p_uart *)(config.base_addr); +#else u32 offset = dev_index * sizeof(struct s5p_uart); return (struct s5p_uart *)(samsung_get_base_uart() + offset); +#endif } /* @@ -73,6 +85,16 @@ void serial_setbrg_dev(const int dev_index) u32 baudrate = gd->baudrate; u32 val; +#if defined(CONFIG_SILENT_CONSOLE) && \ + defined(CONFIG_OF_CONTROL) && \ + !defined(CONFIG_SPL_BUILD) + if (fdtdec_get_config_int(gd->fdt_blob, "silent_console", 0)) + gd->flags |= GD_FLG_SILENT; +#endif + + if (!config.enabled) + return; + val = uclk / baudrate; writel(val / 16 - 1, &uart->ubrdiv); @@ -133,6 +155,9 @@ int serial_getc_dev(const int dev_index) { struct s5p_uart *const uart = s5p_get_base_uart(dev_index); + if (!config.enabled) + return 0; + /* wait for character to arrive */ while (!(readl(&uart->ufstat) & (RX_FIFO_COUNT_MASK | RX_FIFO_FULL_MASK))) { @@ -150,6 +175,9 @@ void serial_putc_dev(const char c, const int dev_index) { struct s5p_uart *const uart = s5p_get_base_uart(dev_index); + if (!config.enabled) + return; + /* wait for room in the tx FIFO */ while ((readl(&uart->ufstat) & TX_FIFO_FULL_MASK)) { if (serial_err_check(dev_index, 1)) @@ -170,6 +198,9 @@ int serial_tstc_dev(const int dev_index) { struct s5p_uart *const uart = s5p_get_base_uart(dev_index); + if (!config.enabled) + return 0; + return (int)(readl(&uart->utrstat) & 0x1); } @@ -212,8 +243,54 @@ DECLARE_S5P_SERIAL_FUNCTIONS(3); struct serial_device s5p_serial3_device = INIT_S5P_SERIAL_STRUCTURE(3, "s5pser3"); +#ifdef CONFIG_OF_CONTROL +int fdtdec_decode_console(int *index, struct fdt_serial *uart) +{ + const void *blob = gd->fdt_blob; + int node; + + node = fdt_path_offset(blob, "console"); + if (node < 0) + return node; + + uart->base_addr = fdtdec_get_addr(blob, node, "reg"); + if (uart->base_addr == FDT_ADDR_T_NONE) + return -FDT_ERR_NOTFOUND; + + uart->port_id = fdtdec_get_int(blob, node, "id", -1); + uart->enabled = fdtdec_get_is_enabled(blob, node); + + return 0; +} +#endif + __weak struct serial_device *default_serial_console(void) { +#ifdef CONFIG_OF_CONTROL + int index = 0; + + if ((!config.base_addr) && (fdtdec_decode_console(&index, &config))) { + debug("Cannot decode default console node\n"); + return NULL; + } + + switch (config.port_id) { + case 0: + return &s5p_serial0_device; + case 1: + return &s5p_serial1_device; + case 2: + return &s5p_serial2_device; + case 3: + return &s5p_serial3_device; + default: + debug("Unknown config.port_id: %d", config.port_id); + break; + } + + return NULL; +#else + config.enabled = 1; #if defined(CONFIG_SERIAL0) return &s5p_serial0_device; #elif defined(CONFIG_SERIAL1) @@ -225,6 +302,7 @@ __weak struct serial_device *default_serial_console(void) #else #error "CONFIG_SERIAL? missing." #endif +#endif } void s5p_serial_initialize(void) diff --git a/drivers/video/exynos_fimd.c b/drivers/video/exynos_fimd.c index 33599499ee..7243ea335e 100644 --- a/drivers/video/exynos_fimd.c +++ b/drivers/video/exynos_fimd.c @@ -280,8 +280,9 @@ void exynos_fimd_lcd_init(vidinfo_t *vid) node, "reg"); if (fimd_ctrl == NULL) debug("Can't get the FIMD base address\n"); -#endif +#else fimd_ctrl = (struct exynos_fb *)samsung_get_base_fimd(); +#endif offset = exynos_fimd_get_base_offset(); |