diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/misc/mxc_ocotp.c | 78 |
1 files changed, 73 insertions, 5 deletions
diff --git a/drivers/misc/mxc_ocotp.c b/drivers/misc/mxc_ocotp.c index d9b02c78e2..65ff8158e5 100644 --- a/drivers/misc/mxc_ocotp.c +++ b/drivers/misc/mxc_ocotp.c @@ -57,6 +57,68 @@ #define WRITE_POSTAMBLE_US 2 +#if defined(CONFIG_MX6) || defined(CONFIG_VF610) +#define FUSE_BANK_SIZE 0x80 +#ifdef CONFIG_MX6SL +#define FUSE_BANKS 8 +#else +#define FUSE_BANKS 16 +#endif +#elif defined CONFIG_MX7 +#define FUSE_BANK_SIZE 0x40 +#define FUSE_BANKS 16 +#else +#error "Unsupported architecture\n" +#endif + +#if defined(CONFIG_MX6) +#include <asm/arch/sys_proto.h> + +/* + * There is a hole in shadow registers address map of size 0x100 + * between bank 5 and bank 6 on iMX6QP, iMX6DQ, iMX6SDL, iMX6SX and iMX6UL. + * Bank 5 ends at 0x6F0 and Bank 6 starts at 0x800. When reading the fuses, + * we should account for this hole in address space. + * + * Similar hole exists between bank 14 and bank 15 of size + * 0x80 on iMX6QP, iMX6DQ, iMX6SDL and iMX6SX. + * Note: iMX6SL has only 0-7 banks and there is no hole. + * Note: iMX6UL doesn't have this one. + * + * This function is to covert user input to physical bank index. + * Only needed when read fuse, because we use register offset, so + * need to calculate real register offset. + * When write, no need to consider hole, always use the bank/word + * index from fuse map. + */ +u32 fuse_bank_physical(int index) +{ + u32 phy_index; + + if (is_cpu_type(MXC_CPU_MX6SL)) { + phy_index = index; + } else if (is_cpu_type(MXC_CPU_MX6UL)) { + if (index >= 6) + phy_index = fuse_bank_physical(5) + (index - 6) + 3; + else + phy_index = index; + } else { + if (index >= 15) + phy_index = fuse_bank_physical(14) + (index - 15) + 2; + else if (index >= 6) + phy_index = fuse_bank_physical(5) + (index - 6) + 3; + else + phy_index = index; + } + return phy_index; +} +#else +u32 fuse_bank_physical(int index) +{ + return index; +} +#endif + static void wait_busy(struct ocotp_regs *regs, unsigned int delay_us) { while (readl(®s->ctrl) & BM_CTRL_BUSY) @@ -73,9 +135,9 @@ static int prepare_access(struct ocotp_regs **regs, u32 bank, u32 word, { *regs = (struct ocotp_regs *)OCOTP_BASE_ADDR; - if (bank >= ARRAY_SIZE((*regs)->bank) || - word >= ARRAY_SIZE((*regs)->bank[0].fuse_regs) >> 2 || - !assert) { + if (bank >= FUSE_BANKS || + word >= ARRAY_SIZE((*regs)->bank[0].fuse_regs) >> 2 || + !assert) { printf("mxc_ocotp %s(): Invalid argument\n", caller); return -EINVAL; } @@ -113,12 +175,15 @@ int fuse_read(u32 bank, u32 word, u32 *val) { struct ocotp_regs *regs; int ret; + u32 phy_bank; ret = prepare_read(®s, bank, word, val, __func__); if (ret) return ret; - *val = readl(®s->bank[bank].fuse_regs[word << 2]); + phy_bank = fuse_bank_physical(bank); + + *val = readl(®s->bank[phy_bank].fuse_regs[word << 2]); return finish_access(regs, __func__); } @@ -259,12 +324,15 @@ int fuse_override(u32 bank, u32 word, u32 val) { struct ocotp_regs *regs; int ret; + u32 phy_bank; ret = prepare_write(®s, bank, word, __func__); if (ret) return ret; - writel(val, ®s->bank[bank].fuse_regs[word << 2]); + phy_bank = fuse_bank_physical(bank); + + writel(val, ®s->bank[phy_bank].fuse_regs[word << 2]); return finish_access(regs, __func__); } |