diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/phy/allwinner/phy-sun4i-usb.c | 6 | ||||
| -rw-r--r-- | drivers/usb/musb-new/musb_core.h | 4 | ||||
| -rw-r--r-- | drivers/usb/musb-new/musb_uboot.c | 19 | ||||
| -rw-r--r-- | drivers/usb/musb-new/sunxi.c | 16 |
4 files changed, 34 insertions, 11 deletions
diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c index 4194a15007..2b3cf48025 100644 --- a/drivers/phy/allwinner/phy-sun4i-usb.c +++ b/drivers/phy/allwinner/phy-sun4i-usb.c @@ -36,6 +36,7 @@ #define PHY_TX_AMPLITUDE_TUNE 0x20 #define PHY_TX_SLEWRATE_TUNE 0x22 #define PHY_DISCON_TH_SEL 0x2a +#define PHY_SQUELCH_DETECT 0x3c #define PHYCTL_DATA BIT(7) #define OTGCTL_ROUTE_MUSB BIT(0) @@ -383,6 +384,11 @@ int sun4i_usb_phy_id_detect(struct phy *phy) return gpio_get_value(usb_phy->gpio_id_det); } +void sun4i_usb_phy_set_squelch_detect(struct phy *phy, bool enabled) +{ + sun4i_usb_phy_write(phy, PHY_SQUELCH_DETECT, enabled ? 0 : 2, 2); +} + static struct phy_ops sun4i_usb_phy_ops = { .of_xlate = sun4i_usb_phy_xlate, .init = sun4i_usb_phy_init, diff --git a/drivers/usb/musb-new/musb_core.h b/drivers/usb/musb-new/musb_core.h index fa4cf86c79..821d0e06f6 100644 --- a/drivers/usb/musb-new/musb_core.h +++ b/drivers/usb/musb-new/musb_core.h @@ -200,6 +200,8 @@ enum musb_g_ep0_state { * @vbus_status: returns vbus status if possible * @set_vbus: forces vbus status * @adjust_channel_params: pre check for standard dma channel_program func + * @pre_root_reset_end: called before the root usb port reset flag gets cleared + * @post_root_reset_end: called after the root usb port reset flag gets cleared */ struct musb_platform_ops { int (*init)(struct musb *musb); @@ -221,6 +223,8 @@ struct musb_platform_ops { int (*adjust_channel_params)(struct dma_channel *channel, u16 packet_sz, u8 *mode, dma_addr_t *dma_addr, u32 *len); + void (*pre_root_reset_end)(struct musb *musb); + void (*post_root_reset_end)(struct musb *musb); }; /* diff --git a/drivers/usb/musb-new/musb_uboot.c b/drivers/usb/musb-new/musb_uboot.c index 8662c0ff70..48242c0475 100644 --- a/drivers/usb/musb-new/musb_uboot.c +++ b/drivers/usb/musb-new/musb_uboot.c @@ -193,19 +193,16 @@ static int _musb_reset_root_port(struct musb_host_data *host, power &= 0xf0; musb_writeb(mbase, MUSB_POWER, MUSB_POWER_RESET | power); mdelay(50); -#ifdef CONFIG_ARCH_SUNXI - /* - * sunxi phy has a bug and it will wrongly detect high speed squelch - * when clearing reset on low-speed devices, temporary disable - * squelch detection to work around this. - */ - sunxi_usb_phy_enable_squelch_detect(0, 0); -#endif + + if (host->host->ops->pre_root_reset_end) + host->host->ops->pre_root_reset_end(host->host); + power = musb_readb(mbase, MUSB_POWER); musb_writeb(mbase, MUSB_POWER, ~MUSB_POWER_RESET & power); -#ifdef CONFIG_ARCH_SUNXI - sunxi_usb_phy_enable_squelch_detect(0, 1); -#endif + + if (host->host->ops->post_root_reset_end) + host->host->ops->post_root_reset_end(host->host); + host->host->isr(0, host->host); host->host_speed = (musb_readb(mbase, MUSB_POWER) & MUSB_POWER_HSMODE) ? USB_SPEED_HIGH : diff --git a/drivers/usb/musb-new/sunxi.c b/drivers/usb/musb-new/sunxi.c index a33ebe5caf..5728a3f384 100644 --- a/drivers/usb/musb-new/sunxi.c +++ b/drivers/usb/musb-new/sunxi.c @@ -304,10 +304,26 @@ static int sunxi_musb_init(struct musb *musb) return 0; } +static void sunxi_musb_pre_root_reset_end(struct musb *musb) +{ + struct sunxi_glue *glue = to_sunxi_glue(musb->controller); + + sun4i_usb_phy_set_squelch_detect(glue->phy, false); +} + +static void sunxi_musb_post_root_reset_end(struct musb *musb) +{ + struct sunxi_glue *glue = to_sunxi_glue(musb->controller); + + sun4i_usb_phy_set_squelch_detect(glue->phy, true); +} + static const struct musb_platform_ops sunxi_musb_ops = { .init = sunxi_musb_init, .enable = sunxi_musb_enable, .disable = sunxi_musb_disable, + .pre_root_reset_end = sunxi_musb_pre_root_reset_end, + .post_root_reset_end = sunxi_musb_post_root_reset_end, }; /* Allwinner OTG supports up to 5 endpoints */ |