diff options
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/ddr/fsl/main.c | 36 | ||||
| -rw-r--r-- | drivers/i2c/mxc_i2c.c | 15 | ||||
| -rw-r--r-- | drivers/net/fsl-mc/mc.c | 10 | ||||
| -rw-r--r-- | drivers/rtc/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/rtc/ds3231.c | 17 |
5 files changed, 76 insertions, 8 deletions
diff --git a/drivers/ddr/fsl/main.c b/drivers/ddr/fsl/main.c index e1f69a1d25..ac0783b428 100644 --- a/drivers/ddr/fsl/main.c +++ b/drivers/ddr/fsl/main.c @@ -92,7 +92,10 @@ static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address) uint8_t dummy = 0; #endif +#ifndef CONFIG_DM_I2C i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM); +#endif + #ifdef CONFIG_SYS_FSL_DDR4 /* @@ -101,6 +104,7 @@ static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address) * To access the upper 256 bytes, we need to set EE page address to 1 * See Jedec standar No. 21-C for detail */ +#ifndef CONFIG_DM_I2C i2c_write(SPD_SPA0_ADDRESS, 0, 1, &dummy, 1); ret = i2c_read(i2c_address, 0, 1, (uchar *)spd, 256); if (!ret) { @@ -111,8 +115,38 @@ static void __get_spd(generic_spd_eeprom_t *spd, u8 i2c_address) (int)sizeof(generic_spd_eeprom_t) - 256)); } #else + struct udevice *dev; + int read_len = min(256, (int)sizeof(generic_spd_eeprom_t) - 256); + + ret = i2c_get_chip_for_busnum(0, SPD_SPA0_ADDRESS, 1, &dev); + if (!ret) + dm_i2c_write(dev, 0, &dummy, 1); + ret = i2c_get_chip_for_busnum(0, i2c_address, 1, &dev); + if (!ret) { + if (!dm_i2c_read(dev, 0, (uchar *)spd, 256)) { + if (!i2c_get_chip_for_busnum(0, SPD_SPA1_ADDRESS, + 1, &dev)) + dm_i2c_write(dev, 0, &dummy, 1); + if (!i2c_get_chip_for_busnum(0, i2c_address, 1, &dev)) + ret = dm_i2c_read(dev, 0, + (uchar *)((ulong)spd + 256), + read_len); + } + } +#endif + +#else + +#ifndef CONFIG_DM_I2C ret = i2c_read(i2c_address, 0, 1, (uchar *)spd, - sizeof(generic_spd_eeprom_t)); + sizeof(generic_spd_eeprom_t)); +#else + ret = i2c_get_chip_for_busnum(0, i2c_address, 1, &dev); + if (!ret) + ret = dm_i2c_read(dev, 0, (uchar *)spd, + sizeof(generic_spd_eeprom_t)); +#endif + #endif if (ret) { diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c index 23119cce65..73b9807598 100644 --- a/drivers/i2c/mxc_i2c.c +++ b/drivers/i2c/mxc_i2c.c @@ -558,6 +558,14 @@ static int i2c_read_data(struct mxc_i2c_bus *i2c_bus, uchar chip, uchar *buf, return 0; } +int __enable_i2c_clk(unsigned char enable, unsigned int i2c_num) +{ + return 1; +} + +int enable_i2c_clk(unsigned char enable, unsigned int i2c_num) + __attribute__((weak, alias("__enable_i2c_clk"))); + #ifndef CONFIG_DM_I2C /* * Read data from I2C device @@ -723,13 +731,6 @@ static int mxc_i2c_probe(struct i2c_adapter *adap, uint8_t chip) return bus_i2c_write(i2c_get_base(adap), chip, 0, 0, NULL, 0); } -int __enable_i2c_clk(unsigned char enable, unsigned i2c_num) -{ - return 1; -} -int enable_i2c_clk(unsigned char enable, unsigned i2c_num) - __attribute__((weak, alias("__enable_i2c_clk"))); - void bus_i2c_init(int index, int speed, int unused, int (*idle_bus_fn)(void *p), void *idle_bus_data) { diff --git a/drivers/net/fsl-mc/mc.c b/drivers/net/fsl-mc/mc.c index 1d96e4bdc2..c980ba4edb 100644 --- a/drivers/net/fsl-mc/mc.c +++ b/drivers/net/fsl-mc/mc.c @@ -282,6 +282,16 @@ static int mc_fixup_dpl_mac_addr(void *blob, int dpmac_id, MC_FIXUP_DPL); } +void fdt_fixup_mc_ddr(u64 *base, u64 *size) +{ + u64 mc_size = mc_get_dram_block_size(); + + if (mc_size < MC_DRAM_BLOCK_DEFAULT_SIZE) { + *base = mc_get_dram_addr() + mc_size; + *size = MC_DRAM_BLOCK_DEFAULT_SIZE - mc_size; + } +} + void fdt_fsl_mc_fixup_iommu_map_entry(void *blob) { u32 *prop; diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 860b73d369..8778cc7b26 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -31,6 +31,12 @@ config TPL_DM_RTC drivers to perform the actual functions. See rtc.h for a description of the API. +config RTC_ENABLE_32KHZ_OUTPUT + bool "Enable RTC 32Khz output" + help + Some real-time clocks support the output of 32kHz square waves (such as ds3231), + the config symbol choose Real Time Clock device 32Khz output feature. + config RTC_PCF2127 bool "Enable PCF2127 driver" depends on DM_RTC diff --git a/drivers/rtc/ds3231.c b/drivers/rtc/ds3231.c index 79b026af4b..fde4d860ec 100644 --- a/drivers/rtc/ds3231.c +++ b/drivers/rtc/ds3231.c @@ -148,11 +148,13 @@ void rtc_reset (void) /* * Enable 32KHz output */ +#ifdef CONFIG_RTC_ENABLE_32KHZ_OUTPUT void rtc_enable_32khz_output(void) { rtc_write(RTC_STAT_REG_ADDR, RTC_STAT_BIT_BB32KHZ | RTC_STAT_BIT_EN32KHZ); } +#endif /* * Helper functions @@ -251,6 +253,21 @@ static int ds3231_probe(struct udevice *dev) return 0; } +#ifdef CONFIG_RTC_ENABLE_32KHZ_OUTPUT +int rtc_enable_32khz_output(int busnum, int chip_addr) +{ + int ret; + struct udevice *dev; + + ret = i2c_get_chip_for_busnum(busnum, chip_addr, 1, &dev); + if (!ret) + ret = dm_i2c_reg_write(dev, RTC_STAT_REG_ADDR, + RTC_STAT_BIT_BB32KHZ | + RTC_STAT_BIT_EN32KHZ); + return ret; +} +#endif + static const struct rtc_ops ds3231_rtc_ops = { .get = ds3231_rtc_get, .set = ds3231_rtc_set, |