diff options
Diffstat (limited to 'include/asm-m68k/m5249.h')
| -rw-r--r-- | include/asm-m68k/m5249.h | 167 |
1 files changed, 0 insertions, 167 deletions
diff --git a/include/asm-m68k/m5249.h b/include/asm-m68k/m5249.h deleted file mode 100644 index fa0cb14dae..0000000000 --- a/include/asm-m68k/m5249.h +++ /dev/null @@ -1,167 +0,0 @@ -/* - * mcf5249.h -- Definitions for Motorola Coldfire 5249 - * - * Based on mcf5272sim.h of uCLinux distribution: - * (C) Copyright 1999, Greg Ungerer (gerg@snapgear.com) - * (C) Copyright 2000, Lineo Inc. (www.lineo.com) - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef mcf5249_h -#define mcf5249_h -/****************************************************************************/ - -/* - * useful definitions for reading/writing MBAR offset memory - */ -#define mbar_readLong(x) *((volatile unsigned long *) (CONFIG_SYS_MBAR + x)) -#define mbar_writeLong(x,y) *((volatile unsigned long *) (CONFIG_SYS_MBAR + x)) = y -#define mbar_writeShort(x,y) *((volatile unsigned short *) (CONFIG_SYS_MBAR + x)) = y -#define mbar_writeByte(x,y) *((volatile unsigned char *) (CONFIG_SYS_MBAR + x)) = y -#define mbar2_readLong(x) *((volatile unsigned long *) (CONFIG_SYS_MBAR2 + x)) -#define mbar2_writeLong(x,y) *((volatile unsigned long *) (CONFIG_SYS_MBAR2 + x)) = y -#define mbar2_writeShort(x,y) *((volatile unsigned short *) (CONFIG_SYS_MBAR2 + x)) = y -#define mbar2_writeByte(x,y) *((volatile unsigned char *) (CONFIG_SYS_MBAR2 + x)) = y - -/* - * Size of internal RAM - */ - -#define INT_RAM_SIZE 32768 /* RAMBAR0 - 32k */ -#define INT_RAM_SIZE2 65536 /* RAMBAR1 - 64k */ - -/* - * Define the 5249 SIM register set addresses. - */ - -/***************** - ***** MBAR1 ***** - *****************/ -#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ -#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w) */ -#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ -#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ -#define MCFSIM_MPARK 0x0c /* Bus master park register (r/w) */ - -#define MCFSIM_SIMR 0x00 /* SIM Config reg (r/w) */ -#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ -#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ -#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ -#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ -#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ -#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ -#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ -#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ -#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ -#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ -#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ -#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ - -#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ -#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ - -#define MCFSIM_DCR 0x100 /* DRAM Control reg (r/w) */ -#define MCFSIM_DACR0 0x108 /* DRAM 0 Addr and Ctrl (r/w) */ -#define MCFSIM_DMR0 0x10c /* DRAM 0 Mask reg (r/w) */ -#define MCFSIM_DACR1 0x110 /* DRAM 1 Addr and Ctrl (r/w) */ -#define MCFSIM_DMR1 0x114 /* DRAM 1 Mask reg (r/w) */ - -/***************** - ***** MBAR2 ***** - *****************/ - -/* GPIO Addresses - * Note: These are offset from MBAR2! - */ -#define MCFSIM_GPIO_READ 0x00 /* Read-Only access to gpio 0-31 (MBAR2) (r) */ -#define MCFSIM_GPIO_OUT 0x04 /* Output register for gpio 0-31 (MBAR2) (r/w) */ -#define MCFSIM_GPIO_EN 0x08 /* gpio 0-31 enable (r/w) */ -#define MCFSIM_GPIO_FUNC 0x0c /* gpio 0-31 function select (r/w) */ -#define MCFSIM_GPIO1_READ 0xb0 /* Read-Only access to gpio 32-63 (MBAR2) (r) */ -#define MCFSIM_GPIO1_OUT 0xb4 /* Output register for gpio 32-63 (MBAR2) (r/w) */ -#define MCFSIM_GPIO1_EN 0xb8 /* gpio 32-63 enable (r/w) */ -#define MCFSIM_GPIO1_FUNC 0xbc /* gpio 32-63 function select (r/w) */ - -#define MCFSIM_GPIO_INT_STAT 0xc0 /* Secondary Interrupt status (r) */ -#define MCFSIM_GPIO_INT_CLEAR 0xc0 /* Secondary Interrupt status (w) */ -#define MCFSIM_GPIO_INT_EN 0xc4 /* Secondary Interrupt status (r/w) */ - -#define MCFSIM_INT_STAT3 0xe0 /* 3rd Interrupt ctrl status (r) */ -#define MCFSIM_INT_CLEAR3 0xe0 /* 3rd Interrupt ctrl clear (w) */ -#define MCFSIM_INT_EN3 0xe4 /* 3rd Interrupt ctrl enable (r/w) */ - -#define MCFSIM_INTLEV1 0x140 /* Interrupts 0 - 7 (r/w) */ -#define MCFSIM_INTLEV2 0x144 /* Interrupts 8 -15 (r/w) */ -#define MCFSIM_INTLEV3 0x148 /* Interrupts 16-23 (r/w) */ -#define MCFSIM_INTLEV4 0x14c /* Interrupts 24-31 (r/w) */ -#define MCFSIM_INTLEV5 0x150 /* Interrupts 32-39 (r/w) */ -#define MCFSIM_INTLEV6 0x154 /* Interrupts 40-47 (r/w) */ -#define MCFSIM_INTLEV7 0x158 /* Interrupts 48-55 (r/w) */ -#define MCFSIM_INTLEV8 0x15c /* Interrupts 56-63 (r/w) */ - -#define MCFSIM_SPURVEC 0x167 /* Spurious Vector Register (r/w) */ -#define MCFSIM_INTBASE 0x16b /* Software interrupt base address (r/w) */ - -#define MCFSIM_IDECONFIG1 0x18c /* IDE config register 1 (r/w) */ -#define MCFSIM_IDECONFIG2 0x190 /* IDE config register 1 (r/w) */ - -#define MCFSIM_PLLCR 0x180 /* PLL Control register */ - -/* - * Some symbol defines for the above... - */ -#define MCFSIM_SWDICR MCFSIM_ICR0 /* Watchdog timer ICR */ -#define MCFSIM_TIMER1ICR MCFSIM_ICR1 /* Timer 1 ICR */ -#define MCFSIM_TIMER2ICR MCFSIM_ICR2 /* Timer 2 ICR */ -#define MCFSIM_I2CICR MCFSIM_ICR3 /* I2C ICR */ -#define MCFSIM_UART1ICR MCFSIM_ICR4 /* UART 1 ICR */ -#define MCFSIM_UART2ICR MCFSIM_ICR5 /* UART 2 ICR */ -/* XXX - If needed, DMA ICRs go here */ -#define MCFSIM_QSPIICR MCFSIM_ICR10 /* QSPI ICR */ - -/* - * Bit definitions for the ICR family of registers. - */ -#define MCFSIM_ICR_AUTOVEC 0x80 /* Auto-vectored intr */ -#define MCFSIM_ICR_LEVEL0 0x00 /* Level 0 intr */ -#define MCFSIM_ICR_LEVEL1 0x04 /* Level 1 intr */ -#define MCFSIM_ICR_LEVEL2 0x08 /* Level 2 intr */ -#define MCFSIM_ICR_LEVEL3 0x0c /* Level 3 intr */ -#define MCFSIM_ICR_LEVEL4 0x10 /* Level 4 intr */ -#define MCFSIM_ICR_LEVEL5 0x14 /* Level 5 intr */ -#define MCFSIM_ICR_LEVEL6 0x18 /* Level 6 intr */ -#define MCFSIM_ICR_LEVEL7 0x1c /* Level 7 intr */ - -#define MCFSIM_ICR_PRI0 0x00 /* Priority 0 intr */ -#define MCFSIM_ICR_PRI1 0x01 /* Priority 1 intr */ -#define MCFSIM_ICR_PRI2 0x02 /* Priority 2 intr */ -#define MCFSIM_ICR_PRI3 0x03 /* Priority 3 intr */ - -/* - * Macros to read/set IMR register. It is 32 bits on the 5249. - */ - -#define mcf_getimr() \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) - -#define mcf_setimr(imr) \ - *((volatile unsigned long *) (MCF_MBAR + MCFSIM_IMR)) = (imr); - -#endif /* mcf5249_h */ |