summaryrefslogtreecommitdiff
path: root/include/configs/Total5200.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/Total5200.h')
-rw-r--r--include/configs/Total5200.h33
1 files changed, 28 insertions, 5 deletions
diff --git a/include/configs/Total5200.h b/include/configs/Total5200.h
index 29c627c628..830bf81a45 100644
--- a/include/configs/Total5200.h
+++ b/include/configs/Total5200.h
@@ -60,6 +60,25 @@
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+/*
+ * Video console
+ */
+#if 1
+#define CONFIG_VIDEO_SED13806
+#define CONFIG_VIDEO_SED13806_16BPP
+
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VIDEO_LOGO
+/* #define CONFIG_VIDEO_BMP_LOGO */
+#define CONFIG_CONSOLE_EXTRA_INFO
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_SPLASH_SCREEN
+
+#define ADD_VIDEO_CMD CFG_CMD_BMP
+#else
+#define ADD_VIDEO_CMD 0
+#endif
#ifdef CONFIG_MPC5200 /* MGT5100 PCI is not supported yet. */
/*
@@ -114,6 +133,7 @@
CFG_CMD_EEPROM | \
CFG_CMD_FAT | \
CFG_CMD_IDE | \
+ ADD_VIDEO_CMD | \
ADD_PCI_CMD | \
ADD_USB_CMD)
@@ -129,7 +149,9 @@
*/
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#define CONFIG_PREBOOT "echo;" \
+#define CONFIG_PREBOOT \
+ "setenv stdout serial;setenv stderr serial;" \
+ "echo;" \
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
"echo"
@@ -150,6 +172,7 @@
"net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
"rootpath=/opt/eldk/ppc_82xx\0" \
"bootfile=/tftpboot/MPC5200/uImage\0" \
+ "console=serial\0" \
""
#define CONFIG_BOOTCOMMAND "run flash_self"
@@ -201,7 +224,7 @@
# define CFG_FLASH_SIZE 0x06000000
#endif /* CONFIG_TOTAL5200_REV */
-#if !defined(CFG_LOWBOOT)
+#if defined(CFG_LOWBOOT)
# define CFG_ENV_ADDR 0xFE040000
#else /* CFG_LOWBOOT */
# define CFG_ENV_ADDR 0xFFF40000
@@ -223,7 +246,7 @@
#define CFG_MBAR 0xF0000000 /* 64 kB */
#define CFG_FPGA_BASE 0xF0010000 /* 64 kB */
#define CFG_CPLD_BASE 0xF0020000 /* 64 kB */
-#define CFG_LCD_BASE 0xF0100000 /* 2048 kB */
+#define CFG_LCD_BASE 0xF1000000 /* 4096 kB */
/* Use SRAM until RAM will be available */
#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
@@ -332,8 +355,8 @@
#define CFG_CS1_CFG 0x0019FF00 /* 25WS, MX, AL, AA, CE, AS_25, DS_32 */
#define CFG_CS2_START CFG_LCD_BASE
-#define CFG_CS2_SIZE 0x00200000 /* 2048 kB */
-#define CFG_CS2_CFG 0x0019FD00 /* 25WS, MX, AL, AA, CE, AS_25, DS_16 */
+#define CFG_CS2_SIZE 0x00400000 /* 4096 kB */
+#define CFG_CS2_CFG 0x0032FD00 /* 50WS, MX, AL, AA, CE, AS_25, DS_16 */
#if CONFIG_TOTAL5200_REV==1
# define CFG_CS3_START CFG_CPLD_BASE