diff options
Diffstat (limited to 'include/configs/a3m071.h')
| -rw-r--r-- | include/configs/a3m071.h | 408 |
1 files changed, 0 insertions, 408 deletions
diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h deleted file mode 100644 index 82b9ff471d..0000000000 --- a/include/configs/a3m071.h +++ /dev/null @@ -1,408 +0,0 @@ -/* - * Copyright 2012-2013 Stefan Roese <sr@denx.de> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC5200 -#define CONFIG_A3M071 /* A3M071 board */ - -#define CONFIG_SYS_TEXT_BASE 0x01000000 /* boot low for 32 MiB boards */ - -#define CONFIG_SPL_TARGET "u-boot-img.bin" - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33MHz */ - -#define CONFIG_MISC_INIT_R -#define CONFIG_SYS_LOWBOOT /* Enable lowboot */ - -#ifdef CONFIG_A4M2K -#define CONFIG_HOSTNAME a4m2k -#else -#define CONFIG_HOSTNAME a3m071 -#endif - -#define CONFIG_BOOTCOUNT_LIMIT - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_BOOTP_SERVERIP -#define CONFIG_BOOTP_MAY_FAIL -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_SERVERIP -#define CONFIG_NET_RETRY_COUNT 3 -#define CONFIG_NETCONSOLE -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_MTD_PARTITIONS /* needed for UBI */ -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=fc000000.flash" -#define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:512k(u-boot)," \ - "128k(env1)," \ - "128k(env2)," \ - "128k(hwinfo)," \ - "1M(nvramsim)," \ - "128k(dtb)," \ - "5M(kernel)," \ - "128k(sysinfo)," \ - "7552k(root)," \ - "4M(app)," \ - "5376k(data)," \ - "8M(install)" - -#define CONFIG_LZO /* needed for UBI */ -#define CONFIG_RBTREE /* needed for UBI */ -#define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_UBIFS - -/* - * IPB Bus clocking configuration. - */ -#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ -/* define for 66MHz speed - undef for 33MHz PCI clock speed */ -#ifdef CONFIG_A4M2K -#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 -#else -#undef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 -#endif - -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - -#define OF_CPU "PowerPC,5200@0" -#define OF_SOC "soc5200@f0000000" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" - -/* - * NOR flash configuration - */ -#define CONFIG_SYS_FLASH_BASE 0xfc000000 -#define CONFIG_SYS_FLASH_SIZE 0x02000000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x80000) - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 -#define CONFIG_SYS_FLASH_LOCK_TOUT 5 -#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 -#define CONFIG_SYS_FLASH_PROTECTION -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#define CONFIG_FLASH_VERIFY - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OVERWRITE -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xf0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - -#define CONFIG_SYS_MONITOR_LEN (512 << 10) -#define CONFIG_SYS_MALLOC_LEN (4 << 20) -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC -#define CONFIG_MPC5xxx_FEC_MII100 -#ifdef CONFIG_A4M2K -#define CONFIG_PHY_ADDR 0x01 -#else -#define CONFIG_PHY_ADDR 0x00 -#endif - -/* - * GPIO configuration - */ - -/* - * GPIO-config depends on failsave-level - * failsave 0 means just MPX-config, no digiboard, no fpga - * 1 means digiboard ok - * 2 means fpga ok - */ - -#ifdef CONFIG_A4M2K -#define CONFIG_SYS_GPS_PORT_CONFIG 0x1005C805 -#else -/* for failsave-level 0 - full failsave */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x1005C005 -/* for failsave-level 1 - only digiboard ok */ -#define CONFIG_SYS_GPS_PORT_CONFIG_1 0x1005C065 -/* for failsave-level 2 - all ok */ -#define CONFIG_SYS_GPS_PORT_CONFIG_2 0x1005C065 -#endif - -#define CONFIG_WDOG_GPIO_PIN GPIO_WKUP_7 -#if defined(CONFIG_A4M2K) && !defined(CONFIG_SPL_BUILD) -#define CONFIG_HW_WATCHDOG /* Use external HW-Watchdog */ -#endif - -/* - * Configuration matrix - * MSB LSB - * failsave 0 0x1005C005 00010000000001011100000000000101 ( full failsave ) - * failsave 1 0x1005C065 00010000000001011100000001100101 ( digib.-ver ok ) - * failsave 2 0x1005C065 00010000000001011100000001100101 ( all ok ) - * || ||| || | ||| | | | | - * || ||| || | ||| | | | | bit rev name - * ++-+++-++--+---+++-+---+---+---+- 0 31 CS1 - * +-+++-++--+---+++-+---+---+---+- 1 30 LPTZ - * ||| || | ||| | | | | 2 29 ALTs - * +++-++--+---+++-+---+---+---+- 3 28 ALTs - * ++-++--+---+++-+---+---+---+- 4 27 CS7 - * +-++--+---+++-+---+---+---+- 5 26 CS6 - * || | ||| | | | | 6 25 ATA - * ++--+---+++-+---+---+---+- 7 24 ATA - * +--+---+++-+---+---+---+- 8 23 IR_USB_CLK - * | ||| | | | | 9 22 IRDA - * | ||| | | | | 10 21 IRDA - * +---+++-+---+---+---+- 11 20 IRDA - * ||| | | | | 12 19 Ether - * ||| | | | | 13 18 Ether - * ||| | | | | 14 17 Ether - * +++-+---+---+---+- 15 16 Ether - * ++-+---+---+---+- 16 15 PCI_DIS - * +-+---+---+---+- 17 14 USB_SE - * | | | | 18 13 USB - * +---+---+---+- 19 12 USB - * | | | 20 11 PSC3 - * | | | 21 10 PSC3 - * | | | 22 9 PSC3 - * +---+---+- 23 8 PSC3 - * | | 24 7 - - * | | 25 6 PSC2 - * | | 26 5 PSC2 - * +---+- 27 4 PSC2 - * | 28 3 - - * | 29 2 PSC1 - * | 30 1 PSC1 - * +- 31 0 PSC1 - */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP - -#define CONFIG_CMDLINE_EDITING - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 -#else -#define CONFIG_SYS_CBSIZE 256 -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_MEMTEST_START 0x00100000 -#define CONFIG_SYS_MEMTEST_END 0x00f00000 - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT (HID0_ICE | HID0_ICFI) -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE - -#ifdef CONFIG_A4M2K -/* external MRAM */ -#define CONFIG_SYS_CS1_START 0xf1000000 -#define CONFIG_SYS_CS1_SIZE (512 << 10) /* 512KiB MRAM */ -#endif - -#define CONFIG_SYS_CS2_START 0xe0000000 -#define CONFIG_SYS_CS2_SIZE 0x00100000 - -/* FPGA slave io (512kiB / 1MiB) - see ticket #66 */ -#define CONFIG_SYS_CS3_START 0xE9000000 -#ifdef CONFIG_A4M2K -#define CONFIG_SYS_CS3_SIZE 0x00100000 -#else -#define CONFIG_SYS_CS3_SIZE 0x00080000 -#endif -/* 00000000 00110010 1 0 1 1 10 01 00 00 0 0 0 0 = 0x0032B900 */ -#define CONFIG_SYS_CS3_CFG 0x0032B900 - -#ifndef CONFIG_A4M2K -/* Diagnosis Interface - see ticket #63 */ -#define CONFIG_SYS_CS4_START 0xEA000000 -#define CONFIG_SYS_CS4_SIZE 0x00000001 -/* 00000000 00000010 1 0 1 1 10 01 00 00 0 0 0 0 = 0x0002B900 */ -#define CONFIG_SYS_CS4_CFG 0x0002B900 -#endif - -/* FPGA master io (64kiB / 1MiB) - see ticket #66 */ -#define CONFIG_SYS_CS5_START 0xE8000000 -#ifdef CONFIG_A4M2K -#define CONFIG_SYS_CS5_SIZE 0x00100000 -#else -#define CONFIG_SYS_CS5_SIZE 0x00010000 -#endif -/* 00000000 00110010 1 0 1 1 10 01 00 00 0 0 0 0 = 0x0032B900 */ -#define CONFIG_SYS_CS5_CFG 0x0032B900 - -#ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* for pci_clk = 66 MHz */ -#define CONFIG_SYS_BOOTCS_CFG 0x0006F900 -#define CONFIG_SYS_CS1_CFG 0x0008FD00 -#define CONFIG_SYS_CS2_CFG 0x0006F90C -#else /* for pci_clk = 33 MHz */ -#define CONFIG_SYS_BOOTCS_CFG 0x0002F900 -#define CONFIG_SYS_CS1_CFG 0x0001FB00 -#define CONFIG_SYS_CS2_CFG 0x0002F90C -#endif - -#define CONFIG_SYS_CS_BURST 0x00000000 -/* set DC for FPGA CS5 and CS3 to 0 - see ticket #66 */ -/* R 7 R 6 R 5 R 4 R 3 R 2 R 1 R 0 */ -/* 00 11 00 11 00 00 00 11 00 00 00 00 00 00 00 00 */ -#define CONFIG_SYS_CS_DEADCYCLE 0x33030000 - -#define CONFIG_SYS_RESET_ADDRESS 0xff000000 - -/* - * Environment Configuration - */ - -#undef CONFIG_BOOTARGS - -#define CONFIG_SYS_AUTOLOAD "n" - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \"run flash_mtd\" to boot from flash with mtd filesystem;" \ - "echo Type \"run net_nfs\" to boot from tftp with nfs filesystem;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_SYS_FDT_BASE 0xfc1e0000 -#define CONFIG_SYS_FDT_SIZE (16<<10) - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "verify=no\0" \ - "loadaddr=200000\0" \ - "kernel_addr=" __stringify(CONFIG_SYS_OS_BASE) "\0" \ - "kernel_addr_r=1000000\0" \ - "fdt_addr=" __stringify(CONFIG_SYS_FDT_BASE) "\0" \ - "fdt_addr_r=1800000\0" \ - "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \ - "fdtfile=" __stringify(CONFIG_HOSTNAME) "/" \ - __stringify(CONFIG_HOSTNAME) ".dtb\0" \ - "rootpath=/opt/eldk-5.2.1/powerpc/" \ - "core-image-minimal-mtdutils-dropbear-generic\0" \ - "consoledev=ttyPSC0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "mtdargs=setenv bootargs root=/dev/mtdblock8 " \ - "rootfstype=squashfs,jffs2\0" \ - "addhost=setenv bootargs ${bootargs} " \ - "hostname=${hostname}\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs} " \ - "console=${consoledev},${baudrate}\0" \ - "flash_nfs=run nfsargs addip addtty addmtd addhost;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "flash_mtd=run mtdargs addip addtty addmtd addhost;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "flash_self=run ramargs addip addtty addmtd addhost;" \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${fdt_addr_r} ${fdtfile};" \ - "run nfsargs addip addtty addmtd addhost;" \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "load=tftp ${loadaddr} " __stringify(CONFIG_HOSTNAME) \ - "/u-boot-img.bin\0" \ - "update=protect off fc000000 fc07ffff;" \ - "era fc000000 fc07ffff;" \ - "cp.b ${loadaddr} fc000000 ${filesize}\0" \ - "upd=run load;run update\0" \ - "upd_fdt=tftp 1800000 a3m071/a3m071.dtb;" \ - "run mtdargs addip addtty addmtd addhost;" \ - "fdt addr 1800000;fdt boardsetup;fdt chosen;" \ - "erase fc1e0000 fc1fffff;cp.b 1800000 fc1e0000 20000" \ - "upd_kernel=tftp 1000000 a3m071/uImage-uncompressed;" \ - "erase fc200000 fc6fffff;" \ - "cp.b 1000000 fc200000 ${filesize}" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "mtdids=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run flash_mtd" - -/* - * SPL related defines - */ -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_TEXT_BASE 0xfc000000 - -/* Place BSS for SPL near end of SDRAM */ -#define CONFIG_SPL_BSS_START_ADDR ((128 - 1) << 20) -#define CONFIG_SPL_BSS_MAX_SIZE (64 << 10) - -/* Place patched DT blob (fdt) at this address */ -#define CONFIG_SYS_SPL_ARGS_ADDR 0x01800000 - -/* Settings for real U-Boot to be loaded from NOR flash */ -#ifndef __ASSEMBLY__ -extern char __spl_flash_end[]; -#endif -#define CONFIG_SYS_UBOOT_BASE __spl_flash_end -#define CONFIG_SYS_SPL_MAX_LEN (32 << 10) -#define CONFIG_SYS_UBOOT_START 0x1000100 - -#endif /* __CONFIG_H */ |