diff options
Diffstat (limited to 'include/configs/apalis_imx6.h')
-rw-r--r-- | include/configs/apalis_imx6.h | 89 |
1 files changed, 39 insertions, 50 deletions
diff --git a/include/configs/apalis_imx6.h b/include/configs/apalis_imx6.h index ba4e96da50..96169f55f0 100644 --- a/include/configs/apalis_imx6.h +++ b/include/configs/apalis_imx6.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* - * Copyright 2013-2015 Toradex, Inc. + * Copyright 2013-2019 Toradex, Inc. * * Configuration settings for the Toradex Apalis iMX6 */ @@ -34,17 +34,12 @@ #define CONFIG_MXC_UART_BASE UART1_BASE /* I2C Configs */ -#define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC -#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ -#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ -#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ +#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ #define CONFIG_SYS_I2C_SPEED 100000 - -/* OCOTP Configs */ -#ifdef CONFIG_CMD_FUSE -#define CONFIG_MXC_OCOTP -#endif +#define CONFIG_SYS_MXC_I2C3_SPEED 400000 /* MMC Configs */ #define CONFIG_FSL_USDHC @@ -57,9 +52,6 @@ * SATA Configs */ #ifdef CONFIG_CMD_SATA -#define CONFIG_SYS_SATA_MAX_DEVICE 1 -#define CONFIG_DWC_AHSATA_PORT_ID 0 -#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR #define CONFIG_LBA48 #endif @@ -82,11 +74,7 @@ /* Client */ #define CONFIG_USBD_HS -#define CONFIG_USB_GADGET_MASS_STORAGE - /* Framebuffer and LCD */ -#define CONFIG_VIDEO_IPUV3 -#define CONFIG_SYS_CONSOLE_IS_IN_ENV #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE #define CONFIG_VIDEO_BMP_RLE8 #define CONFIG_SPLASH_SCREEN @@ -115,37 +103,36 @@ #define CONFIG_LOADADDR 0x12000000 -#ifdef CONFIG_CMD_SATA -#define CONFIG_DRIVE_SATA "sata " -#else -#define CONFIG_DRIVE_SATA -#endif - -#ifdef CONFIG_CMD_MMC -#define CONFIG_DRIVE_MMC "mmc " -#else -#define CONFIG_DRIVE_MMC -#endif - -#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC +#ifndef CONFIG_SPL_BUILD +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 1) \ + func(MMC, mmc, 2) \ + func(USB, usb, 0) \ + func(DHCP, dhcp, na) +#include <config_distro_bootcmd.h> +#undef BOOTENV_RUN_NET_USB_START +#define BOOTENV_RUN_NET_USB_START "" +#else /* CONFIG_SPL_BUILD */ +#define BOOTENV +#endif /* CONFIG_SPL_BUILD */ #define DFU_ALT_EMMC_INFO \ "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \ "boot part 0 1;" \ "rootfs part 0 2;" \ - "uImage fat 0 1;" \ - "imx6q-colibri-eval-v3.dtb fat 0 1;" \ - "imx6q-colibri-cam-eval-v3.dtb fat 0 1" + "zImage fat 0 1;" \ + "imx6q-apalis-eval.dtb fat 0 1;" \ + "imx6q-apalis-cam-eval.dtb fat 0 1" #define EMMC_BOOTCMD \ - "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \ + "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext4 " \ "rootwait\0" \ "emmcboot=run setup; " \ "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \ "${vidargs}; echo Booting from internal eMMC chip...; " \ "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \ "${boot_file} && run fdt_fixup && " \ - "bootm ${kernel_addr_r} ${dtbparam}\0" \ + "bootz ${kernel_addr_r} ${dtbparam}\0" \ "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \ "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0" @@ -155,7 +142,9 @@ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ "kernel_addr_r=0x11000000\0" \ - "ramdisk_addr_r=0x12100000\0" + "pxefile_addr_r=0x17100000\0" \ + "ramdisk_addr_r=0x12100000\0" \ + "scriptaddr=0x17000000\0" #define NFS_BOOTCMD \ "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \ @@ -163,30 +152,30 @@ "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \ "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \ "run nfsdtbload; dhcp ${kernel_addr_r} " \ - "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \ + "&& run fdt_fixup && bootz ${kernel_addr_r} ${dtbparam}\0" \ "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \ "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0" -#define SD_BOOTCMD \ - "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \ +#define SD_BOOTCMD \ + "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext4 " \ "rootwait\0" \ "sdboot=run setup; " \ "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \ "${vidargs}; echo Booting from SD card; " \ "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \ "${boot_file} && run fdt_fixup && " \ - "bootm ${kernel_addr_r} ${dtbparam}\0" \ + "bootz ${kernel_addr_r} ${dtbparam}\0" \ "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \ "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0" #define USB_BOOTCMD \ - "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \ + "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext4 " \ "rootwait\0" \ "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \ "${usbargs} ${vidargs}; echo Booting from USB stick...; " \ "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \ "${boot_file} && run fdt_fixup && " \ - "bootm ${kernel_addr_r} ${dtbparam}\0" \ + "bootz ${kernel_addr_r} ${dtbparam}\0" \ "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \ "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0" @@ -197,11 +186,12 @@ #define FDT_FILE "imx6q-apalis_v1_0-eval.dtb" #endif #define CONFIG_EXTRA_ENV_SETTINGS \ + BOOTENV \ "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \ - "run nfsboot ; echo ; echo nfsboot failed ; " \ - "usb start ;" \ + "run distro_bootcmd ; " \ + "usb start ; " \ "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \ - "boot_file=uImage\0" \ + "boot_file=zImage\0" \ "console=ttymxc0\0" \ "defargs=enable_wait_mode=off vmalloc=400M\0" \ "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \ @@ -214,8 +204,10 @@ "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \ "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \ "flash_eth.img && source ${loadaddr}\0" \ - "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \ - "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \ + "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; " \ + "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img " \ + "|| setenv drive 2; mmc rescan; load ${interface} ${drive}:1" \ + " ${loadaddr} flash_blk.img && " \ "source ${loadaddr}\0" \ "setup=setenv setupargs fec_mac=${ethaddr} " \ "consoleblank=0 no_console_suspend=1 console=tty1 " \ @@ -255,7 +247,6 @@ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) /* environment organization */ - #define CONFIG_ENV_SIZE (8 * 1024) #if defined(CONFIG_ENV_IS_IN_MMC) @@ -266,8 +257,6 @@ #define CONFIG_SYS_MMC_ENV_PART 1 #endif -#define CONFIG_OF_SYSTEM_SETUP - #define CONFIG_CMD_TIME #endif /* __CONFIG_H */ |