diff options
Diffstat (limited to 'include/configs/dart_6ul.h')
| -rw-r--r-- | include/configs/dart_6ul.h | 131 |
1 files changed, 131 insertions, 0 deletions
diff --git a/include/configs/dart_6ul.h b/include/configs/dart_6ul.h new file mode 100644 index 0000000000..fb1b899d71 --- /dev/null +++ b/include/configs/dart_6ul.h @@ -0,0 +1,131 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Board configuration file for Variscite DART-6UL Evaluation Kit + * Copyright (C) 2019 Parthiban Nallathambi <parthitce@gmail.com> + */ +#ifndef __DART_6UL_H +#define __DART_6UL_H + +#include <linux/sizes.h> +#include "mx6_common.h" + +/* SPL options */ +#include "imx6_spl.h" + +/* NAND pin conflicts with usdhc2 */ +#ifdef CONFIG_CMD_NAND +#define CONFIG_SYS_FSL_USDHC_NUM 1 +#else +#define CONFIG_SYS_FSL_USDHC_NUM 2 +#endif + +#ifdef CONFIG_CMD_NET +#define CONFIG_FEC_ENET_DEV 0 + +#if (CONFIG_FEC_ENET_DEV == 0) +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_MXC_PHYADDR 0x1 +#define CONFIG_FEC_XCV_TYPE RMII +#define CONFIG_ETHPRIME "eth0" +#elif (CONFIG_FEC_ENET_DEV == 1) +#define IMX_FEC_BASE ENET2_BASE_ADDR +#define CONFIG_FEC_MXC_PHYADDR 0x3 +#define CONFIG_FEC_XCV_TYPE RMII +#define CONFIG_ETHPRIME "eth1" +#endif +#endif + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (16 * SZ_1M) + +/* Environment settings */ +#define CONFIG_ENV_SIZE SZ_8K +#define CONFIG_ENV_OFFSET (14 * SZ_64K) +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT +#define CONFIG_ENV_OFFSET_REDUND \ + (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) + +/* Environment in SD */ +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_SYS_MMC_ENV_PART 0 +#define MMC_ROOTFS_DEV 0 +#define MMC_ROOTFS_PART 2 + +/* Console configs */ +#define CONFIG_MXC_UART_BASE UART1_BASE + +/* MMC Configs */ +#define CONFIG_FSL_USDHC + +#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR +#define CONFIG_SUPPORT_EMMC_BOOT + +/* I2C configs */ +#ifdef CONFIG_CMD_I2C +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ +#define CONFIG_SYS_I2C_SPEED 100000 +#endif + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_MEMTEST_START 0x80000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x8000000) + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 + +/* Physical Memory Map */ +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#define PHYS_SDRAM_SIZE SZ_512M + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* USB Configs */ +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) +#define CONFIG_MXC_USB_FLAGS 0 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 + +#define CONFIG_IMX_THERMAL + +#define ENV_MMC \ + "mmcdev=" __stringify(MMC_ROOTFS_DEV) "\0" \ + "mmcpart=" __stringify(MMC_ROOTFS_PART) "\0" \ + "fitpart=1\0" \ + "bootdelay=3\0" \ + "silent=1\0" \ + "optargs=rw rootwait\0" \ + "mmcautodetect=yes\0" \ + "mmcrootfstype=ext4\0" \ + "mmcfit_name=fitImage\0" \ + "mmcloadfit=fatload mmc ${mmcdev}:${fitpart} ${fit_addr} " \ + "${mmcfit_name}\0" \ + "mmcargs=setenv bootargs " \ + "root=/dev/mmcblk${mmcdev}p${mmcpart} ${optargs} " \ + "console=${console} rootfstype=${mmcrootfstype}\0" \ + "mmc_mmc_fit=run mmcloadfit;run mmcargs addcon; bootm ${fit_addr}\0" \ + +/* Default environment */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "fdt_high=0xffffffff\0" \ + "console=ttymxc0,115200n8\0" \ + "addcon=setenv bootargs ${bootargs} console=${console},${baudrate}\0" \ + "fit_addr=0x82000000\0" \ + ENV_MMC + +#define CONFIG_BOOTCOMMAND "run mmc_mmc_fit" + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(MMC, mmc, 1) \ + func(DHCP, dhcp, na) + +#include <config_distro_bootcmd.h> +#endif /* __DART_6UL_H */ |