diff options
Diffstat (limited to 'include/configs/ls1088a_common.h')
| -rw-r--r-- | include/configs/ls1088a_common.h | 38 |
1 files changed, 38 insertions, 0 deletions
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index fa058f7e52..6b71d47c5a 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -20,18 +20,24 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) /* Link Definitions */ +#ifdef CONFIG_SPL +#define CONFIG_SYS_TEXT_BASE 0x80400000 +#else #ifdef CONFIG_QSPI_BOOT #define CONFIG_SYS_TEXT_BASE 0x20100000 #else #define CONFIG_SYS_TEXT_BASE 0x30100000 #endif +#endif #define CONFIG_SUPPORT_RAW_INITRD #define CONFIG_SKIP_LOWLEVEL_INIT +#if !defined(CONFIG_SD_BOOT) #define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */ +#endif #define CONFIG_VERY_BIG_RAM #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL @@ -148,6 +154,19 @@ unsigned long long get_qixis_addr(void); /* Miscellaneous configurable options */ #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000) +/* SATA */ +#ifdef CONFIG_SCSI +#define CONFIG_LIBATA +#define CONFIG_SCSI_AHCI +#define CONFIG_SCSI_AHCI_PLAT +#define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1 + +#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1 +#define CONFIG_SYS_SCSI_MAX_LUN 1 +#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ + CONFIG_SYS_SCSI_MAX_LUN) +#endif + /* Physical Memory Map */ #define CONFIG_CHIP_SELECTS_PER_CTRL 4 @@ -187,6 +206,11 @@ unsigned long long get_qixis_addr(void); " fsl_mc apply dpl 0x80200000 &&" \ " sf read $kernel_load $kernel_start" \ " $kernel_size && bootm $kernel_load" +#elif defined(CONFIG_SD_BOOT) +#define CONFIG_BOOTCOMMAND "mmcinfo;mmc read 0x80200000 0x6800 0x800;"\ + " fsl_mc apply dpl 0x80200000 &&" \ + " mmc read $kernel_load $kernel_start" \ + " $kernel_size && bootm $kernel_load" #else /* NOR BOOT*/ #define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580d00000 &&" \ " cp.b $kernel_start $kernel_load" \ @@ -206,6 +230,20 @@ unsigned long long get_qixis_addr(void); #define CONFIG_PANIC_HANG /* do not reset board on panic */ +#ifdef CONFIG_SPL +#define CONFIG_SPL_BSS_START_ADDR 0x80100000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" +#define CONFIG_SPL_MAX_SIZE 0x16000 +#define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0) +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SPL_TEXT_BASE 0x1800a000 + +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 +#define CONFIG_SYS_SPL_MALLOC_START 0x80200000 +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#endif #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #endif /* __LS1088_COMMON_H */ |