diff options
Diffstat (limited to 'include/configs/ls2080ardb.h')
| -rw-r--r-- | include/configs/ls2080ardb.h | 48 |
1 files changed, 29 insertions, 19 deletions
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index c1819d22a8..006a4c97fb 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -273,13 +273,9 @@ unsigned long get_board_sys_clk(void); #define I2C_MUX_CH_DEFAULT 0x8 /* SPI */ -#if defined(CONFIG_FSL_QSPI) || defined(CONFIG_FSL_DSPI) -#ifdef CONFIG_FSL_DSPI +#if defined(CONFIG_FSL_DSPI) #define CONFIG_SPI_FLASH_STMICRO #endif -#define FSL_QSPI_FLASH_SIZE SZ_64M /* 64MB */ -#define FSL_QSPI_FLASH_NUM 2 -#endif /* * RTC configuration @@ -321,11 +317,15 @@ unsigned long get_board_sys_clk(void); #include <config_distro_bootcmd.h> #ifdef CONFIG_TFABOOT -#define QSPI_MC_INIT_CMD \ - "env exists secureboot && " \ - "esbc_validate 0x20640000 && " \ - "esbc_validate 0x20680000;" \ - "fsl_mc start mc 0x20a00000 0x20e00000 \0" +#define QSPI_MC_INIT_CMD \ + "sf probe 0:0; " \ + "sf read 0x80640000 0x640000 0x80000; " \ + "env exists secureboot && " \ + "esbc_validate 0x80640000 && " \ + "esbc_validate 0x80680000; " \ + "sf read 0x80a00000 0xa00000 0x300000; " \ + "sf read 0x80e00000 0xe00000 0x100000; " \ + "fsl_mc start mc 0x80a00000 0x80e00000 \0" #define SD_MC_INIT_CMD \ "mmcinfo;mmc read 0x80a00000 0x5000 0x1200;" \ "mmc read 0x80e00000 0x7000 0x800;" \ @@ -342,11 +342,15 @@ unsigned long get_board_sys_clk(void); "fsl_mc start mc 0x580a00000 0x580e00000 \0" #else #ifdef CONFIG_QSPI_BOOT -#define MC_INIT_CMD \ - "mcinitcmd=env exists secureboot && " \ - "esbc_validate 0x20640000 && " \ - "esbc_validate 0x20680000;" \ - "fsl_mc start mc 0x20a00000 0x20e00000 \0" +#define MC_INIT_CMD \ + "mcinitcmd=sf probe 0:0; " \ + "sf read 0x80640000 0x640000 0x80000; " \ + "env exists secureboot && " \ + "esbc_validate 0x80640000 && " \ + "esbc_validate 0x80680000; " \ + "sf read 0x80a00000 0xa00000 0x300000; " \ + "sf read 0x80e00000 0xe00000 0x100000; " \ + "fsl_mc start mc 0x80a00000 0x80e00000 \0" #elif defined(CONFIG_SD_BOOT) #define MC_INIT_CMD \ "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \ @@ -500,10 +504,13 @@ unsigned long get_board_sys_clk(void); #ifdef CONFIG_TFABOOT #define QSPI_NOR_BOOTCOMMAND \ + "sf probe 0:0; " \ + "sf read 0x806c0000 0x6c0000 0x40000; " \ "env exists mcinitcmd && env exists secureboot "\ - "&& esbc_validate 0x206C0000; " \ + "&& esbc_validate 0x806c0000; " \ + "sf read 0x80d00000 0xd00000 0x100000; " \ "env exists mcinitcmd && " \ - "fsl_mc lazyapply dpl 0x20d00000; " \ + "fsl_mc lazyapply dpl 0x80d00000; " \ "run distro_bootcmd;run qspi_bootcmd; " \ "env exists secureboot && esbc_halt;" @@ -530,10 +537,13 @@ unsigned long get_board_sys_clk(void); #ifdef CONFIG_QSPI_BOOT /* Try to boot an on-QSPI kernel first, then do normal distro boot */ #define CONFIG_BOOTCOMMAND \ + "sf probe 0:0; " \ + "sf read 0x806c0000 0x6c0000 0x40000; " \ "env exists mcinitcmd && env exists secureboot "\ - "&& esbc_validate 0x206C0000; " \ + "&& esbc_validate 0x806C0000; " \ + "sf read 0x80d00000 0xd00000 0x100000; " \ "env exists mcinitcmd && " \ - "fsl_mc lazyapply dpl 0x20d00000; " \ + "fsl_mc lazyapply dpl 0x80d00000; " \ "run distro_bootcmd;run qspi_bootcmd; " \ "env exists secureboot && esbc_halt;" #elif defined(CONFIG_SD_BOOT) |