summaryrefslogtreecommitdiff
path: root/include/configs/m28evk.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs/m28evk.h')
-rw-r--r--include/configs/m28evk.h225
1 files changed, 0 insertions, 225 deletions
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
deleted file mode 100644
index bb1d6b4f5d..0000000000
--- a/include/configs/m28evk.h
+++ /dev/null
@@ -1,225 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
- * on behalf of DENX Software Engineering GmbH
- */
-#ifndef __CONFIGS_M28EVK_H__
-#define __CONFIGS_M28EVK_H__
-
-/* System configurations */
-#define CONFIG_MACH_TYPE MACH_TYPE_M28EVK
-
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-
-/* Memory configuration */
-#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
-#define PHYS_SDRAM_1 0x40000000 /* Base address */
-#define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-
-/* Environment */
-#define CONFIG_ENV_SIZE (16 * 1024)
-
-/* Environment is in NAND */
-#if defined(CONFIG_CMD_NAND) && defined(CONFIG_ENV_IS_IN_NAND)
-#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
-#define CONFIG_ENV_SECT_SIZE (128 * 1024)
-#define CONFIG_ENV_RANGE (4 * CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_OFFSET (24 * CONFIG_ENV_SECT_SIZE) /* 3 MiB */
-#define CONFIG_ENV_OFFSET_REDUND \
- (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
-
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-#endif
-
-/* FEC Ethernet on SoC */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_FEC_MXC
-#endif
-
-/* RTC */
-#ifdef CONFIG_CMD_DATE
-/* Use the internal RTC in the MXS chip */
-#define CONFIG_RTC_INTERNAL
-#ifdef CONFIG_RTC_INTERNAL
-#define CONFIG_RTC_MXS
-#else
-#define CONFIG_RTC_M41T62
-#define CONFIG_SYS_I2C_RTC_ADDR 0x68
-#define CONFIG_SYS_M41T11_BASE_YEAR 2000
-#endif
-#endif
-
-/* USB */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_MXS_PORT0
-#define CONFIG_EHCI_MXS_PORT1
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#endif
-
-/* SPI */
-#ifdef CONFIG_CMD_SPI
-#define CONFIG_DEFAULT_SPI_BUS 2
-#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0
-
-/* SPI FLASH */
-#ifdef CONFIG_CMD_SF
-#define CONFIG_SF_DEFAULT_BUS 2
-#define CONFIG_SF_DEFAULT_CS 0
-#define CONFIG_SF_DEFAULT_SPEED 40000000
-#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
-
-#define CONFIG_ENV_SPI_BUS 2
-#define CONFIG_ENV_SPI_CS 0
-#define CONFIG_ENV_SPI_MAX_HZ 40000000
-#define CONFIG_ENV_SPI_MODE SPI_MODE_0
-#endif
-
-#endif
-
-/* LCD */
-#ifdef CONFIG_VIDEO
-#define CONFIG_VIDEO_LOGO
-#define CONFIG_SPLASH_SCREEN
-#define CONFIG_BMP_16BPP
-#define CONFIG_VIDEO_BMP_RLE8
-#define CONFIG_VIDEO_BMP_GZIP
-#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20)
-#endif
-
-/* Booting Linux */
-#define CONFIG_BOOTFILE "fitImage"
-#define CONFIG_BOOTCOMMAND "run mmc_mmc"
-#define CONFIG_LOADADDR 0x42000000
-#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
-
-/* Extra Environment */
-#define CONFIG_PREBOOT "run try_bootscript"
-#define CONFIG_HOSTNAME "m28evk"
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "consdev=ttyAMA0\0" \
- "baudrate=115200\0" \
- "bootscript=boot.scr\0" \
- "bootdev=/dev/mmcblk0p2\0" \
- "rootdev=/dev/mmcblk0p3\0" \
- "netdev=eth0\0" \
- "hostname=m28evk\0" \
- "rootpath=/opt/eldk-5.5/armv5te/rootfs-qte-sdk\0" \
- "kernel_addr_r=0x42000000\0" \
- "videomode=video=ctfb:x:800,y:480,depth:18,mode:0,pclk:30066," \
- "le:0,ri:256,up:0,lo:45,hs:1,vs:1,sync:100663296," \
- "vmode:0\0" \
- "update_nand_full_filename=u-boot.nand\0" \
- "update_nand_firmware_filename=u-boot.sb\0" \
- "update_sd_firmware_filename=u-boot.sd\0" \
- "update_nand_firmware_maxsz=0x100000\0" \
- "update_nand_stride=0x40\0" /* MX28 datasheet ch. 12.12 */ \
- "update_nand_count=0x4\0" /* MX28 datasheet ch. 12.12 */ \
- "update_nand_get_fcb_size=" /* Get size of FCB blocks */ \
- "nand device 0 ; " \
- "nand info ; " \
- "setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \
- "setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \
- "update_nand_full=" /* Update FCB, DBBT and FW */ \
- "if tftp ${update_nand_full_filename} ; then " \
- "run update_nand_get_fcb_size ; " \
- "nand scrub -y 0x0 ${filesize} ; " \
- "nand write.raw ${loadaddr} 0x0 ${fcb_sz} ; " \
- "setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \
- "setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \
- "nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \
- "fi\0" \
- "update_nand_firmware=" /* Update only firmware */ \
- "if tftp ${update_nand_firmware_filename} ; then " \
- "run update_nand_get_fcb_size ; " \
- "setexpr fcb_sz ${update_nand_fcb} * 2 ; " /* FCB + DBBT */ \
- "setexpr fw_sz ${update_nand_firmware_maxsz} * 2 ; " \
- "setexpr fw_off ${fcb_sz} + ${update_nand_firmware_maxsz};" \
- "nand erase ${fcb_sz} ${fw_sz} ; " \
- "nand write ${loadaddr} ${fcb_sz} ${filesize} ; " \
- "nand write ${loadaddr} ${fw_off} ${filesize} ; " \
- "fi\0" \
- "update_sd_firmware=" /* Update the SD firmware partition */ \
- "if mmc rescan ; then " \
- "if tftp ${update_sd_firmware_filename} ; then " \
- "setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \
- "setexpr fw_sz ${fw_sz} + 1 ; " \
- "mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
- "fi ; " \
- "fi\0" \
- "addcons=" \
- "setenv bootargs ${bootargs} " \
- "console=${consdev},${baudrate}\0" \
- "addip=" \
- "setenv bootargs ${bootargs} " \
- "ip=${ipaddr}:${serverip}:${gatewayip}:" \
- "${netmask}:${hostname}:${netdev}:off\0" \
- "addmisc=" \
- "setenv bootargs ${bootargs} ${miscargs}\0" \
- "adddfltmtd=" \
- "if test \"x${mtdparts}\" == \"x\" ; then " \
- "mtdparts default ; " \
- "fi\0" \
- "addmtd=" \
- "run adddfltmtd ; " \
- "setenv bootargs ${bootargs} ${mtdparts}\0" \
- "addargs=run addcons addmtd addmisc\0" \
- "mmcload=" \
- "mmc rescan ; " \
- "load mmc 0:2 ${kernel_addr_r} ${bootfile}\0" \
- "ubiload=" \
- "ubi part UBI ; ubifsmount ubi0:rootfs ; " \
- "ubifsload ${kernel_addr_r} /boot/${bootfile}\0" \
- "netload=" \
- "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
- "miscargs=nohlt panic=1\0" \
- "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
- "ubiargs=" \
- "setenv bootargs ubi.mtd=5 " \
- "root=ubi0:rootfs rootfstype=ubifs\0" \
- "nfsargs=" \
- "setenv bootargs root=/dev/nfs rw " \
- "nfsroot=${serverip}:${rootpath},v3,tcp\0" \
- "mmc_mmc=" \
- "run mmcload mmcargs addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "mmc_ubi=" \
- "run mmcload ubiargs addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "mmc_nfs=" \
- "run mmcload nfsargs addip addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "ubi_mmc=" \
- "run ubiload mmcargs addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "ubi_ubi=" \
- "run ubiload ubiargs addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "ubi_nfs=" \
- "run ubiload nfsargs addip addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "net_mmc=" \
- "run netload mmcargs addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "net_ubi=" \
- "run netload ubiargs addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "net_nfs=" \
- "run netload nfsargs addip addargs ; " \
- "bootm ${kernel_addr_r}\0" \
- "try_bootscript=" \
- "mmc rescan;" \
- "if test -e mmc 0:2 ${bootscript} ; then " \
- "if load mmc 0:2 ${kernel_addr_r} ${bootscript};" \
- "then ; " \
- "echo Running bootscript... ; " \
- "source ${kernel_addr_r} ; " \
- "fi ; " \
- "fi\0"
-
-/* The rest of the configuration is shared */
-#include <configs/mxs.h>
-
-#endif /* __CONFIGS_M28EVK_H__ */
generated by cgit (git 2.34.1) at 2025-02-10 02:33:37 +0000