diff options
Diffstat (limited to 'include/configs/netstar.h')
| -rw-r--r-- | include/configs/netstar.h | 245 |
1 files changed, 0 insertions, 245 deletions
diff --git a/include/configs/netstar.h b/include/configs/netstar.h deleted file mode 100644 index f159013934..0000000000 --- a/include/configs/netstar.h +++ /dev/null @@ -1,245 +0,0 @@ -/* - * (C) Copyright 2005 2N TELEKOMUNIKACE, Ladislav Michl - * - * Configuation settings for the TI OMAP NetStar board. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <configs/omap1510.h> - -#define CONFIG_ARM925T 1 /* This is an arm925t CPU */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP1510 1 /* which is in a 5910 */ - -/* Input clock of PLL */ -#define CONFIG_SYS_CLK_FREQ 150000000 /* 150MHz */ -#define CONFIG_XTAL_FREQ 12000000 /* 12MHz */ - -#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ - -#define CONFIG_MISC_INIT_R /* There is nothing to really init */ -#define BOARD_LATE_INIT /* but we flash the LEDs here */ - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */ -#define CONFIG_SYS_CONSOLE_INFO_QUIET - -/* - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 1 -#define PHYS_SDRAM_1 0x10000000 -#define PHYS_SDRAM_1_SIZE (64 * 1024 * 1024) -#define PHYS_FLASH_1 0x00000000 - -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR 0x4000 -#define CONFIG_ENV_SIZE (8 * 1024) -#define CONFIG_ENV_SECT_SIZE (8 * 1024) -#define CONFIG_ENV_ADDR_REDUND 0x6000 -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE -#define CONFIG_ENV_OVERWRITE - -/* - * Size of malloc() pool - */ -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) - -/* - * The stack size is set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (1 * 1024 * 1024) - -/* - * Hardware drivers - */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK (CONFIG_XTAL_FREQ) -#define CONFIG_SYS_NS16550_COM1 OMAP1510_UART1_BASE - -#define CONFIG_NET_MULTI -#define CONFIG_SMC91111 -#define CONFIG_SMC91111_BASE 0x04000300 - -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 19 - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_FLASH_CFI_LEGACY -#define CONFIG_SYS_FLASH_LEGACY_512Kx16 - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x04000000 + (2 << 23) -#define NAND_ALLOW_ERASE_ALL 1 - -#define CONFIG_HARD_I2C -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_DRIVER_OMAP1510_I2C - -#define CONFIG_RTC_DS1307 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 - - -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -/* - * Partitions (mtdparts command line support) - */ -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=gen_nand.0" -#define MTDPARTS_DEFAULT "mtdparts=" \ - "physmap-flash.0:8k@16k(env),8k(r_env),448k@576k(u-boot);" \ - "gen_nand.0:4M(kernel0),40M(rootfs0),4M(kernel1),40M(rootfs1),-(data)" - -/* - * Command line configuration - */ -#define CONFIG_CMD_BDI -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_FLASH -#define CONFIG_CMD_IMI -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_NAND -#define CONFIG_CMD_NET -#define CONFIG_CMD_PING -#define CONFIG_CMD_RUN - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH - -#define CONFIG_LOOPW - -#define CONFIG_BOOTDELAY 3 -#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */ -#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ -#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */ -#define CONFIG_BOOTCOMMAND "run fboot" -#define CONFIG_PREBOOT "run setup" -#define CONFIG_EXTRA_ENV_SETTINGS \ - "autostart=yes\0" \ - "ospart=0\0" \ - "setup=setenv bootargs console=ttyS0,$baudrate $mtdparts\0" \ - "setpart=" \ - "if test -n $swapos; then " \ - "setenv swapos; saveenv; " \ - "if test $ospart -eq 0; then " \ - "setenv ospart 1; " \ - "else " \ - "setenv ospart 0; " \ - "fi; " \ - "fi\0" \ - "nfsargs=setenv bootargs $bootargs " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off " \ - "nfsroot=$rootpath root=/dev/nfs\0" \ - "flashargs=run setpart;setenv bootargs $bootargs " \ - "root=mtd:rootfs$ospart ro " \ - "rootfstype=jffs2\0" \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \ - "fboot=run flashargs;nboot kernel$ospart\0" \ - "nboot=bootp;run nfsargs;tftp\0" - -#if 0 /* feel free to disable for development */ -#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */ -#define CONFIG_AUTOBOOT_PROMPT \ - "\nNetStar PBX - boot in %d secs...\n", bootdelay -#define CONFIG_AUTOBOOT_DELAY_STR "." /* 1st "password" */ -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_SYS_PROMPT "# " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_AUTO_COMPLETE - -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 -#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE - \ - (CONFIG_SYS_MONITOR_LEN + CONFIG_SYS_MALLOC_LEN + CONFIG_STACKSIZE) - -#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x400000) - -/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1. - * This time is further subdivided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE -#define CONFIG_SYS_PTV 7 -#define CONFIG_SYS_HZ 1000 - -#define OMAP5910_DPLL_DIV 1 -#define OMAP5910_DPLL_MUL \ - ((CONFIG_SYS_CLK_FREQ * (1 << OMAP5910_DPLL_DIV)) / CONFIG_XTAL_FREQ) - -#define OMAP5910_ARM_PER_DIV 2 /* CKL/4 */ -#define OMAP5910_LCD_DIV 2 /* CKL/4 */ -#define OMAP5910_ARM_DIV 0 /* CKL/1 */ -#define OMAP5910_DSP_DIV 0 /* CKL/1 */ -#define OMAP5910_TC_DIV 1 /* CKL/2 */ -#define OMAP5910_DSP_MMU_DIV 1 /* CKL/2 */ -#define OMAP5910_ARM_TIM_SEL 1 /* CKL used for MPU timers */ - -#define OMAP5910_ARM_EN_CLK 0x03d6 /* 0000 0011 1101 0110b */ -#define OMAP5910_ARM_CKCTL ((OMAP5910_ARM_PER_DIV) | \ - (OMAP5910_LCD_DIV << 2) | \ - (OMAP5910_ARM_DIV << 4) | \ - (OMAP5910_DSP_DIV << 6) | \ - (OMAP5910_TC_DIV << 8) | \ - (OMAP5910_DSP_MMU_DIV << 10) | \ - (OMAP5910_ARM_TIM_SEL << 12)) - -#endif /* __CONFIG_H */ |