diff options
Diffstat (limited to 'include/configs/pico-imx7d.h')
| -rw-r--r-- | include/configs/pico-imx7d.h | 94 |
1 files changed, 52 insertions, 42 deletions
diff --git a/include/configs/pico-imx7d.h b/include/configs/pico-imx7d.h index d2ffa70fc5..13e735379e 100644 --- a/include/configs/pico-imx7d.h +++ b/include/configs/pico-imx7d.h @@ -10,7 +10,19 @@ #include "mx7_common.h" -#define PHYS_SDRAM_SIZE SZ_1G +#include "imx7_spl.h" + +#ifdef CONFIG_SPL_OS_BOOT +/* Falcon Mode */ +#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args" +#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" +#define CONFIG_SYS_SPL_ARGS_ADDR 0x88000000 + +/* Falcon Mode - MMC support: args@1MB kernel@2MB */ +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x800 /* 1MB */ +#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512) +#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x1000 /* 2MB */ +#endif /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M) @@ -32,6 +44,18 @@ /* MMC Config */ #define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_DFU_ENV_SETTINGS \ + "dfu_alt_info=" \ + "spl raw 0x2 0x400 mmcpart 1;" \ + "u-boot raw 0x8a 0x400 mmcpart 1;" \ + "/boot/zImage ext4 0 1;" \ + "/boot/imx7d-pico-pi.dtb ext4 0 1;" \ + "rootfs part 0 1\0" \ + +#define BOOTMENU_ENV \ + "bootmenu_0=Boot using PICO-PI baseboard=" \ + "setenv fdtfile imx7d-pico-pi.dtb\0" \ + #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ #define CONFIG_SYS_MMC_IMG_LOAD_PART 1 @@ -41,48 +65,34 @@ "console=ttymxc4\0" \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ - "fdt_file=imx7d-pico-pi.dtb\0" \ + "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ + BOOTMENU_ENV \ "fdt_addr=0x83000000\0" \ - "ip_dyn=yes\0" \ - "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ - "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ - "finduuid=part uuid mmc 0:2 uuid\0" \ - "mmcargs=setenv bootargs console=${console},${baudrate} " \ - "root=PARTUUID=${uuid} rootwait rw\0" \ - "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ - "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run finduuid; " \ - "run mmcargs; " \ - "if run loadfdt; then " \ - "bootz ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi;\0" \ - "netargs=setenv bootargs console=${console},${baudrate} " \ - "root=/dev/nfs " \ - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ - "netboot=echo Booting from net ...; " \ - "run netargs; " \ - "if test ${ip_dyn} = yes; then " \ - "setenv get_cmd dhcp; " \ - "else " \ - "setenv get_cmd tftp; " \ - "fi; " \ - "${get_cmd} ${image}; " \ - "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ - "bootz ${loadaddr} - ${fdt_addr}; " \ - "else " \ - "echo WARN: Cannot load the DT; " \ - "fi;\0" - -#define CONFIG_BOOTCOMMAND \ - "if mmc rescan; then " \ - "if run loadimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "else run netboot; fi" + "fdt_addr_r=0x83000000\0" \ + "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ + "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \ + "ramdisk_addr_r=0x83000000\0" \ + "ramdiskaddr=0x83000000\0" \ + "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \ + CONFIG_DFU_ENV_SETTINGS \ + "findfdt=" \ + "if test $fdtfile = ask ; then " \ + "bootmenu -1; fi;" \ + "if test $fdtfile != ask ; then " \ + "saveenv; fi;\0" \ + "finduuid=part uuid mmc 0:1 uuid\0" \ + "partitions=" \ + "uuid_disk=${uuid_gpt_disk};" \ + "name=rootfs,size=0,uuid=${uuid_gpt_rootfs}\0" \ + "fastboot_partition_alias_system=rootfs\0" \ + "setup_emmc=mmc dev 0; gpt write mmc 0 $partitions; reset;\0" \ + BOOTENV + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(DHCP, dhcp, na) + +#include <config_distro_bootcmd.h> #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x20000000) |