diff options
Diffstat (limited to 'include/configs/pmdra.h')
| -rw-r--r-- | include/configs/pmdra.h | 186 |
1 files changed, 0 insertions, 186 deletions
diff --git a/include/configs/pmdra.h b/include/configs/pmdra.h deleted file mode 100644 index e170ee9ccd..0000000000 --- a/include/configs/pmdra.h +++ /dev/null @@ -1,186 +0,0 @@ -/* - * Copyright (C) 2008 Prodrive BV <pieter.voorthijsen@prodrive.nl> - * - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H -#include <asm/sizes.h> - -/*=======*/ -/* Board */ -/*=======*/ -#define CFG_PMDRA -#define CFG_NAND_LARGEPAGE -/*===================*/ -/* SoC Configuration */ -/*===================*/ -#define CONFIG_ARM926EJS /* arm926ejs CPU core */ -#define CONFIG_SYS_CLK_FREQ ((CFG_HZ_CLOCK * (CFG_DAVINCI_PLL1_PLLM + 1))/2) -#define CFG_TIMERBASE 0x01c21400 /* use timer 0 */ -#define CFG_HZ_CLOCK 27000000 /* Timer Input clock freq */ -#define CFG_HZ 1000 -#define CFG_DAVINCI_PINMUX_0 0x00000c1f -#define CFG_DAVINCI_WAITCFG 0x10000000 -#define CFG_DAVINCI_ACFG2 0x00460385 /* NOR CE Config */ -#define CFG_DAVINCI_ACFG3 0x0822218c /* NAND CE Config */ -#define CFG_DAVINCI_ACFG4 0x3ffffffd -#define CFG_DAVINCI_ACFG5 0x3ffffffd -#define CFG_DAVINCI_NANDCE 3 /* Use CE3 for NAND */ -#define CFG_DAVINCI_DDRCTL 0x50006405 /* DDR timing config */ -#define CFG_DAVINCI_SDREF 0x000005c3 -#define CFG_DAVINCI_SDCFG 0x00178832 /* 8 banks , CAS = 4*/ -#define CFG_DAVINCI_SDTIM0 0x28923211 -#define CFG_DAVINCI_SDTIM1 0x0016c722 -#define CFG_DAVINCI_MMARG_BRF0 0x00444400 -/* DM6446 = 0x15, DM6441 = 0x12, DM6441_LV = 0x0e */ -#define CFG_DAVINCI_PLL1_PLLM 0x12 -#define CFG_DAVINCI_PLL2_PLLM 0x17 /* 162 MHz */ -#define CFG_DAVINCI_PLL2_DIV1 0x0b /* 54 MHz */ -#define CFG_DAVINCI_PLL2_DIV2 0x01 -/*====================================================*/ -/* EEPROM definitions for Atmel 24C256BN SEEPROM chip */ -/* on Sonata/DV_EVM board. No EEPROM on schmoogie. */ -/*====================================================*/ -#define CFG_I2C_EEPROM_ADDR_LEN 2 -#define CFG_I2C_EEPROM_ADDR 0x50 -#define CFG_EEPROM_PAGE_WRITE_BITS 6 -#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 -/*=============*/ -/* Memory Info */ -/*=============*/ -#define CFG_MALLOC_LEN (0x10000 + 128*1024) /* malloc() len */ -#define CFG_GBL_DATA_SIZE 128 /* reserved for initial data */ -#define CFG_MEMTEST_START 0x80000000 /* memtest start address */ -#define CFG_MEMTEST_END 0x81000000 /* 16MB RAM test */ -#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ -#define CONFIG_STACKSIZE (256*1024) /* regular stack */ -#define PHYS_SDRAM_1 0x80000000 /* DDR Start */ -#define PHYS_SDRAM_1_SIZE 0x10000000 /* DDR size 256MB */ -#define DDR_8BANKS /* 8-bank DDR2 (256MB) */ -/*====================*/ -/* Serial Driver info */ -/*====================*/ -#define CFG_NS16550 -#define CFG_NS16550_SERIAL -#define CFG_NS16550_REG_SIZE 4 /* NS16550 register size */ -#define CFG_NS16550_COM1 0x01c20000 /* Base address of UART0 */ -#define CFG_NS16550_COM2 0x01c20800 /* Base address of UART2 */ -#define CFG_NS16550_CLK 27000000 /* Input clock to NS16550 */ -#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ -#define CONFIG_BAUDRATE 115200 /* Default baud rate */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -/*===================*/ -/* I2C Configuration */ -/*===================*/ -#define CONFIG_HARD_I2C -#define CONFIG_DRIVER_DAVINCI_I2C -#define CFG_I2C_SPEED 50000 /* 100Kbps won't work, silicon bug */ -#define CFG_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ -/*==================================*/ -/* Network & Ethernet Configuration */ -/*==================================*/ -#define CONFIG_DRIVER_TI_EMAC -#define CONFIG_MII -#define CONFIG_BOOTP_DEFAULT -#define CONFIG_BOOTP_DNS -#define CONFIG_BOOTP_DNS2 -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_NET_RETRY_COUNT 10 -/*=====================*/ -/* Flash & Environment */ -/*=====================*/ -#define CFG_USE_NAND -#define CFG_NAND_BASE 0x04000000 -#undef CFG_NAND_HW_ECC -#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define NAND_MAX_CHIPS 1 -#define DEF_BOOTM "" -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_FLASH_CFI_DRIVER -#define CFG_FLASH_CFI -#define CFG_MAX_FLASH_BANKS 1 /* max number of flash banks */ -#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0x40000) -#define CFG_ENV_OFFSET (CFG_ENV_ADDR) -#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster)*/ -#define PHYS_FLASH_1 0x02000000 /* CS2 Base address */ -#define CFG_FLASH_BASE PHYS_FLASH_1 /* Flash Base for U-Boot */ -#define PHYS_FLASH_SIZE 0x2000000 /* Flash size 32MB */ -#define CFG_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CFG_FLASH_SECT_SZ) -#define CFG_ENV_SECT_SIZE CFG_FLASH_SECT_SZ /* Env sector Size */ -#define CFG_FLASH_SECT_SZ 0x20000 /* 128KB sect size INTEL Flash */ -#define CFG_FLASH_PROTECTION 1 -/*==============================*/ -/* U-Boot general configuration */ -/*==============================*/ -#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ -#define CONFIG_MISC_INIT_R -#define CONFIG_BOOTFILE "uImage" /* Boot file name */ -#define CFG_PROMPT "U-Boot > " /* Monitor Command Prompt */ -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print buffer sz */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ -#define CFG_LOAD_ADDR 0x80700000 /* default Linux kernel load address */ -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ -#define CFG_HUSH_PARSER -#define CFG_PROMPT_HUSH_PS2 "> " -#define CONFIG_CMDLINE_EDITING -#define CFG_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC -#define CONFIG_ENV_OVERWRITE -/*===================*/ -/* Linux Information */ -/*===================*/ -#define LINUX_BOOT_PARAM_ADDR 0x80000100 -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTDELAY 2 -#define CONFIG_BOOTARGS \ - "mem=120M console=ttyS0,115200n8 root=/dev/hda1 rw noinitrd ip=dhcp" -#define CONFIG_BOOTCOMMAND "run nand" -#define CONFIG_EXTRA_ENV_SETTINGS "ethaddr=00:11:22:33:44:55\n" -/*=================*/ -/* U-Boot commands */ -/*=================*/ -#include <config_cmd_default.h> -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_PING -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_EEPROM -#undef CONFIG_CMD_BDI -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_SETGETDCR -#define CONFIG_CMD_FLASH -#undef CONFIG_CMD_IMLS -#define CONFIG_CMD_NAND -/*=======================*/ -/* KGDB support (if any) */ -/*=======================*/ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */ -#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */ -#endif -#endif /* __CONFIG_H */ |