diff options
Diffstat (limited to 'include/configs/socfpga_arria5_secu1.h')
| -rw-r--r-- | include/configs/socfpga_arria5_secu1.h | 131 |
1 files changed, 131 insertions, 0 deletions
diff --git a/include/configs/socfpga_arria5_secu1.h b/include/configs/socfpga_arria5_secu1.h new file mode 100644 index 0000000000..b059100ccd --- /dev/null +++ b/include/configs/socfpga_arria5_secu1.h @@ -0,0 +1,131 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2017-2020 ABB + * + */ +#ifndef __CONFIG_SOCFPGA_SECU1_H__ +#define __CONFIG_SOCFPGA_SECU1_H__ + +#include <asm/arch/base_addr_ac5.h> + +/* Call misc_init_r */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_HUSH_INIT_VAR +/* Eternal oscillator */ +#define CONFIG_SYS_TIMER_RATE 40000000 + +/* Memory configurations */ +#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512MiB on SECU1 */ + +/* + * We use bootcounter in i2c nvram of the RTC (0x68) + * The offset fopr the bootcounter is 0x9e, which are + * the last two bytes of the 128 bytes large NVRAM in the + * RTC which begin at address 0x20 + */ +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 + +/* Booting Linux */ +#define CONFIG_BOOTDELAY 2 +#define CONFIG_BOOTFILE "zImage" +#define CONFIG_BOOTARGS \ + "console=ttyS0," __stringify(CONFIG_BAUDRATE) \ + " ubi.fm_autoconvert=1" \ + " uio_pdrv_genirq.of_id=\"idq,regbank\"" + +#define CONFIG_BOOTCOMMAND \ + "setenv bootcmd '" \ + "bridge enable; " \ + "if test ${bootnum} = \"b\"; " \ + "then run _fpga_loadsafe; " \ + "else if test ${bootcount} -eq 4; then echo \"Switching copy...\"; setexpr x $bootnum % 2 && setexpr bootnum $x + 1; saveenv; fi; " \ + "run _fpga_loaduser; " \ + "fi;" \ + "echo \"Booting bank $bootnum\" && run userload && run userboot;" \ + "' && " \ + "setenv altbootcmd 'setenv bootnum b && saveenv && boot;' && " \ + "saveenv && saveenv && boot;" + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SYS_BOOTM_LEN (64 << 20) + +/* Environment settings */ +#define CONFIG_ENV_OVERWRITE + +/* + * Autoboot + * + * After 45s of inactivity in the prompt, the board will reset. + * Set 'bootretry' in the environment to -1 to disable this behavior + */ +#define CONFIG_BOOT_RETRY_TIME 45 +#define CONFIG_RESET_TO_RETRY + +#define CONFIG_LOADADDR 0x01000000 +#define CONFIG_SYS_LOAD_ADDR CONFIG_KM_KERNEL_ADDR + +/* + * FPGA Remote Update related environment + * + * Note that since those commands access the FPGA, the HPS-to-FPGA + * bridges MUST have been previously enabled (for example + * with 'bridge enable'). + */ +#define FPGA_RMTU_ENV \ + "rmtu_page=0xFF29000C\0" \ + "rmtu_reconfig=0xFF290018\0" \ + "fpga_safebase=0x0\0" \ + "fpga_userbase=0x2000000\0" \ + "_fpga_loaduser=echo Loading FPGA USER image..." \ + " && mw ${rmtu_page} ${fpga_userbase} && mw ${rmtu_reconfig} 1\0" \ + "_fpga_loadsafe=echo Loading FPGA SAFE image..." \ + " && mw ${rmtu_page} ${fpga_safebase} && mw ${rmtu_reconfig} 1\0" \ + +#define CONFIG_KM_NEW_ENV \ + "newenv=" \ + "nand erase 0x100000 0x40000\0" + +#define CONFIG_KM_DEF_ENV_BOOTTARGETS \ + "release=" \ + "run newenv; reset\0" \ + "develop=" \ + "tftp 0x200000 scripts/develop-secu.txt && env import -t 0x200000 ${filesize} && saveenv && reset\0" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + FPGA_RMTU_ENV \ + CONFIG_KM_DEF_ENV_BOOTTARGETS \ + CONFIG_KM_NEW_ENV \ + "socfpga_legacy_reset_compat=1\0" \ + "altbootcmd=run bootcmd;\0" \ + "bootlimit=6\0" \ + "bootnum=1\0" \ + "bootretry=" __stringify(CONFIG_BOOT_RETRY_TIME) "\0" \ + "fdt_addr=" __stringify(CONFIG_KM_FDT_ADDR) "\0" \ + "load=tftpboot ${loadaddr} u-boot-with-nand-spl.sfp\0" \ + "loadaddr=" __stringify(CONFIG_KM_KERNEL_ADDR) "\0" \ + "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \ + "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \ + "update=nand erase 0x0 0x00100000 && nand write ${loadaddr} 0x0 ${filesize}\0" \ + "userload=ubi part nand.ubi &&" \ + "ubi check rootfs$bootnum &&" \ + "ubi read $fdt_addr dtb$bootnum &&" \ + "ubi read $loadaddr kernel$bootnum\0" \ + "userboot=setenv bootargs " CONFIG_BOOTARGS \ + " ubi.mtd=1 ubi.block=0,rootfs$bootnum root=/dev/ubiblock0_$ubivolid" \ + " ro rootfstype=squashfs init=sbin/preinit;" \ + "bootz ${loadaddr} - ${fdt_addr}\0" \ + "verify=y\0" + +/* The rest of the configuration is shared */ +#include <configs/socfpga_common.h> + +#ifdef CONFIG_SPL_NAND_SUPPORT +#undef CONFIG_SYS_NAND_U_BOOT_OFFS +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 +#endif + +#undef CONFIG_WATCHDOG_TIMEOUT_MSECS +#define CONFIG_WATCHDOG_TIMEOUT_MSECS 60000 + +#endif /* __CONFIG_SOCFPGA_SECU1_H__ */ |