diff options
Diffstat (limited to 'include/configs/stamp.h')
| -rw-r--r-- | include/configs/stamp.h | 131 |
1 files changed, 62 insertions, 69 deletions
diff --git a/include/configs/stamp.h b/include/configs/stamp.h index 1402a4131a..248ca70de0 100644 --- a/include/configs/stamp.h +++ b/include/configs/stamp.h @@ -17,7 +17,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -40,7 +40,7 @@ #define CONFIG_RTC_BF533 1 /* FLASH/ETHERNET uses the same address range */ -#define SHARED_RESOURCES 1 +#define SHARED_RESOURCES 1 #define CONFIG_VDSP 1 @@ -49,37 +49,37 @@ * */ -/* CONFIG_CLKIN_HZ is any value in Hz */ +/* CONFIG_CLKIN_HZ is any value in Hz */ #define CONFIG_CLKIN_HZ 11059200 -/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */ -/* 1=CLKIN/2 */ +/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */ +/* 1=CLKIN/2 */ #define CONFIG_CLKIN_HALF 0 -/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */ -/* 1=bypass PLL */ -#define CONFIG_PLL_BYPASS 0 -/* CONFIG_VCO_MULT controls what the multiplier of the PLL is. */ -/* Values can range from 1-64 */ +/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */ +/* 1=bypass PLL */ +#define CONFIG_PLL_BYPASS 0 +/* CONFIG_VCO_MULT controls what the multiplier of the PLL is. */ +/* Values can range from 1-64 */ #define CONFIG_VCO_MULT 45 -/* CONFIG_CCLK_DIV controls what the core clock divider is */ -/* Values can be 1, 2, 4, or 8 ONLY */ +/* CONFIG_CCLK_DIV controls what the core clock divider is */ +/* Values can be 1, 2, 4, or 8 ONLY */ #define CONFIG_CCLK_DIV 1 /* CONFIG_SCLK_DIV controls what the peripheral clock divider is */ -/* Values can range from 1-15 */ +/* Values can range from 1-15 */ #define CONFIG_SCLK_DIV 6 /* * Network Settings */ /* network support */ -#define CONFIG_IPADDR 192.168.0.15 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_GATEWAYIP 192.168.0.1 -#define CONFIG_SERVERIP 192.168.0.2 -#define CONFIG_HOSTNAME STAMP +#define CONFIG_IPADDR 192.168.0.15 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_GATEWAYIP 192.168.0.1 +#define CONFIG_SERVERIP 192.168.0.2 +#define CONFIG_HOSTNAME STAMP #define CONFIG_ROOTPATH /checkout/uClinux-dist/romfs /* To remove hardcoding and enable MAC storage in EEPROM */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:b8 */ +/* #define CONFIG_ETHADDR 02:80:ad:20:31:b8 */ /* * Command settings @@ -90,17 +90,17 @@ #define CONFIG_BOOTDELAY 5 #define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ -#define CONFIG_BOOTCOMMAND "run ramboot" +#define CONFIG_BOOTCOMMAND "run ramboot" #define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n" -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ CFG_CMD_PING | \ CFG_CMD_ELF | \ CFG_CMD_I2C | \ CFG_CMD_CACHE | \ - CFG_CMD_JFFS2 | \ + CFG_CMD_JFFS2 | \ CFG_CMD_DATE) -#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw" +#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw" #define CONFIG_EXTRA_ENV_SETTINGS \ "ramargs=setenv bootargs root=/dev/mtdblock0 rw\0" \ @@ -127,14 +127,14 @@ #define CONFIG_BAUDRATE 57600 #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } -#define CFG_PROMPT "stamp>" /* Monitor Command Prompt */ +#define CFG_PROMPT "stamp>" /* Monitor Command Prompt */ #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ #endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CONFIG_LOADS_ECHO 1 @@ -154,9 +154,9 @@ * */ -#define CFG_FLASH_CFI /* The flash is CFI compatible */ -#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CFG_FLASH_CFI_AMD_RESET +#define CFG_FLASH_CFI /* The flash is CFI compatible */ +#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ +#define CFG_FLASH_CFI_AMD_RESET #define CFG_ENV_IS_IN_FLASH 1 @@ -165,8 +165,8 @@ #define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ #define CFG_ENV_ADDR 0x20020000 -#define CFG_ENV_SIZE 0x10000 -#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ +#define CFG_ENV_SIZE 0x10000 +#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ #define CFG_FLASH_ERASE_TOUT 30000 /* Timeout for Chip Erase (in ms) */ #define CFG_FLASH_ERASEBLOCK_TOUT 5000 /* Timeout for Block Erase (in ms) */ @@ -176,10 +176,10 @@ #define CFG_JFFS2_FIRST_BANK 0 #define CFG_JFFS2_NUM_BANKS 1 /* 512k reserved for u-boot */ -#define CFG_JFFS2_FIRST_SECTOR 11 +#define CFG_JFFS2_FIRST_SECTOR 11 -/* - * following timeouts shall be used once the +/* + * following timeouts shall be used once the * Flash real protection is enabled */ #define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ @@ -204,7 +204,7 @@ *pFIO_FLAG_S = PF_SDA; \ asm("ssync;"); \ } \ - else { \ + else { \ *pFIO_FLAG_C = PF_SDA; \ asm("ssync;"); \ } @@ -212,7 +212,7 @@ *pFIO_FLAG_S = PF_SCL; \ asm("ssync;"); \ } \ - else { \ + else { \ *pFIO_FLAG_C = PF_SCL; \ asm("ssync;"); \ } @@ -236,9 +236,9 @@ /* * IDE/ATA stuff */ -#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ -#undef CONFIG_IDE_LED /* no led for ide supported */ -#undef CONFIG_IDE_RESET /* no reset for ide supported */ +#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ +#undef CONFIG_IDE_LED /* no led for ide supported */ +#undef CONFIG_IDE_RESET /* no reset for ide supported */ #define CFG_IDE_MAXBUS 1 /* max. 1 IDE busses */ #define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */ @@ -246,9 +246,9 @@ #define CFG_ATA_BASE_ADDR 0x20200000 #define CFG_ATA_IDE0_OFFSET 0x0000 -#define CFG_ATA_DATA_OFFSET 0x0020 /* Offset for data I/O */ -#define CFG_ATA_REG_OFFSET 0x0020 /* Offset for normal register accesses */ -#define CFG_ATA_ALT_OFFSET 0x0007 /* Offset for alternate registers */ +#define CFG_ATA_DATA_OFFSET 0x0020 /* Offset for data I/O */ +#define CFG_ATA_REG_OFFSET 0x0020 /* Offset for normal register accesses */ +#define CFG_ATA_ALT_OFFSET 0x0007 /* Offset for alternate registers */ #define CFG_ATA_STRIDE 2 #endif @@ -258,23 +258,20 @@ * */ -#define CONFIG_MEM_SIZE 128 /* 128, 64, 32, 16 */ -#define CONFIG_MEM_ADD_WDTH 11 /* 8, 9, 10, 11 */ +#define CONFIG_MEM_SIZE 128 /* 128, 64, 32, 16 */ +#define CONFIG_MEM_ADD_WDTH 11 /* 8, 9, 10, 11 */ #define CONFIG_MEM_MT48LC64M4A2FB_7E 1 #define CFG_MEMTEST_START 0x00100000 /* memtest works on */ #define CFG_MEMTEST_END 0x07EFFFFF /* 1 ... 127 MB in DRAM */ -#define CFG_LOAD_ADDR 0x01000000 /* default load address */ +#define CFG_LOAD_ADDR 0x01000000 /* default load address */ -#define CFG_SDRAM_BASE 0x00000000 +#define CFG_SDRAM_BASE 0x00000000 #define CFG_MAX_RAM_SIZE 0x08000000 -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ +#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ #define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN) - - - #if ( CONFIG_CLKIN_HALF == 0 ) #define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) #else @@ -289,14 +286,12 @@ #define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ #endif - - /* * Miscellaneous configurable options */ -#define CFG_HZ 1000 /* 1ms time tick */ +#define CFG_HZ 1000 /* 1ms time tick */ -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ +#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ #define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) #define CFG_GBL_DATA_SIZE 0x4000 #define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) @@ -309,25 +304,24 @@ /* * Stack sizes */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ - +#define CONFIG_STACKSIZE (128*1024) /* regular stack */ /* * FLASH organization and environment definitions */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ /* 0xFF, 0xBBC3BBc3, 0x99B39983 */ -/*#define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN) -#define AMBCTL0VAL (B1WAT_11 | B1RAT_11 | B1HT_3 | B1ST_4 | B1TT_4 | B1RDYPOL | \ - B1RDYEN | B0WAT_11 | B0RAT_11 | B0HT_3 | B0ST_4 | B0TT_4 | B0RDYPOL | B0RDYEN) -#define AMBCTL1VAL (B3WAT_9 | B3RAT_9 | B3HT_2 | B3ST_3 | B3TT_4 | B3RDYPOL | \ - B3RDYEN | B2WAT_9 | B2RAT_9 | B2HT_2 | B2ST_4 | B2TT_4 | B2RDYPOL | B2RDYEN) +/*#define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN) +#define AMBCTL0VAL (B1WAT_11 | B1RAT_11 | B1HT_3 | B1ST_4 | B1TT_4 | B1RDYPOL | \ + B1RDYEN | B0WAT_11 | B0RAT_11 | B0HT_3 | B0ST_4 | B0TT_4 | B0RDYPOL | B0RDYEN) +#define AMBCTL1VAL (B3WAT_9 | B3RAT_9 | B3HT_2 | B3ST_3 | B3TT_4 | B3RDYPOL | \ + B3RDYEN | B2WAT_9 | B2RAT_9 | B2HT_2 | B2ST_4 | B2TT_4 | B2RDYPOL | B2RDYEN) */ -#define AMGCTLVAL 0xFF -#define AMBCTL0VAL 0xBBC3BBC3 -#define AMBCTL1VAL 0x99B39983 -#define CF_AMBCTL1VAL 0x99B3ffc2 +#define AMGCTLVAL 0xFF +#define AMBCTL0VAL 0xBBC3BBC3 +#define AMBCTL1VAL 0x99B39983 +#define CF_AMBCTL1VAL 0x99B3ffc2 #ifdef CONFIG_VDSP #define ET_EXEC_VDSP 0x8 @@ -336,5 +330,4 @@ #define VDSP_ENTRY_ADDR 0xFFA00000 #endif - #endif |