diff options
Diffstat (limited to 'include/configs/stamp.h')
| -rw-r--r-- | include/configs/stamp.h | 333 |
1 files changed, 0 insertions, 333 deletions
diff --git a/include/configs/stamp.h b/include/configs/stamp.h deleted file mode 100644 index 248ca70de0..0000000000 --- a/include/configs/stamp.h +++ /dev/null @@ -1,333 +0,0 @@ -/* - * U-boot - stamp.h Configuration file for STAMP board - * having BF533 processor - * - * Copyright (c) 2005 blackfin.uclinux.org - * - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_STAMP_H__ -#define __CONFIG_STAMP_H__ - -/* - * Board settings - * - */ - -#define __ADSPLPBLACKFIN__ 1 -#define __ADSPBF533__ 1 -#define CONFIG_STAMP 1 -#define CONFIG_RTC_BF533 1 - -/* FLASH/ETHERNET uses the same address range */ -#define SHARED_RESOURCES 1 - -#define CONFIG_VDSP 1 - -/* - * Clock settings - * - */ - -/* CONFIG_CLKIN_HZ is any value in Hz */ -#define CONFIG_CLKIN_HZ 11059200 -/* CONFIG_CLKIN_HALF controls what is passed to PLL 0=CLKIN */ -/* 1=CLKIN/2 */ -#define CONFIG_CLKIN_HALF 0 -/* CONFIG_PLL_BYPASS controls if the PLL is used 0=don't bypass */ -/* 1=bypass PLL */ -#define CONFIG_PLL_BYPASS 0 -/* CONFIG_VCO_MULT controls what the multiplier of the PLL is. */ -/* Values can range from 1-64 */ -#define CONFIG_VCO_MULT 45 -/* CONFIG_CCLK_DIV controls what the core clock divider is */ -/* Values can be 1, 2, 4, or 8 ONLY */ -#define CONFIG_CCLK_DIV 1 -/* CONFIG_SCLK_DIV controls what the peripheral clock divider is */ -/* Values can range from 1-15 */ -#define CONFIG_SCLK_DIV 6 - -/* - * Network Settings - */ -/* network support */ -#define CONFIG_IPADDR 192.168.0.15 -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_GATEWAYIP 192.168.0.1 -#define CONFIG_SERVERIP 192.168.0.2 -#define CONFIG_HOSTNAME STAMP -#define CONFIG_ROOTPATH /checkout/uClinux-dist/romfs - -/* To remove hardcoding and enable MAC storage in EEPROM */ -/* #define CONFIG_ETHADDR 02:80:ad:20:31:b8 */ - -/* - * Command settings - * - */ - -#define CFG_LONGHELP 1 - -#define CONFIG_BOOTDELAY 5 -#define CONFIG_BOOT_RETRY_TIME -1 /* Enable this if bootretry required, currently its disabled */ -#define CONFIG_BOOTCOMMAND "run ramboot" -#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds\n" - -#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ - CFG_CMD_PING | \ - CFG_CMD_ELF | \ - CFG_CMD_I2C | \ - CFG_CMD_CACHE | \ - CFG_CMD_JFFS2 | \ - CFG_CMD_DATE) -#define CONFIG_BOOTARGS "root=/dev/mtdblock0 rw" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "ramargs=setenv bootargs root=/dev/mtdblock0 rw\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$(serverip):$(rootpath)\0" \ - "addip=setenv bootargs $(bootargs) " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ - ":$(hostname):eth0:off\0" \ - "ramboot=tftpboot 0x1000000 linux;" \ - "run ramargs;run addip;bootelf\0" \ - "nfsboot=tftpboot 0x1000000 linux;" \ - "run nfsargs;run addip;bootelf\0" \ - "flashboot=bootm 0x20100000\0" \ - "" - -/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include <cmd_confdefs.h> - -/* - * Console settings - * - */ - -#define CONFIG_BAUDRATE 57600 -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } - -#define CFG_PROMPT "stamp>" /* Monitor Command Prompt */ -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_LOADS_ECHO 1 - -/* - * Network settings - * - */ - -#define CONFIG_DRIVER_SMC91111 1 -#define CONFIG_SMC91111_BASE 0x20300300 -/* To remove hardcoding and enable MAC storage in EEPROM */ -/* #define HARDCODE_MAC 1 */ - -/* - * Flash settings - * - */ - -#define CFG_FLASH_CFI /* The flash is CFI compatible */ -#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CFG_FLASH_CFI_AMD_RESET - -#define CFG_ENV_IS_IN_FLASH 1 - -#define CFG_FLASH_BASE 0x20000000 -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ - -#define CFG_ENV_ADDR 0x20020000 -#define CFG_ENV_SIZE 0x10000 -#define CFG_ENV_SECT_SIZE 0x10000 /* Total Size of Environment Sector */ - -#define CFG_FLASH_ERASE_TOUT 30000 /* Timeout for Chip Erase (in ms) */ -#define CFG_FLASH_ERASEBLOCK_TOUT 5000 /* Timeout for Block Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 1 /* Timeout for Flash Write (in ms) */ - -/* JFFS Partition offset set */ -#define CFG_JFFS2_FIRST_BANK 0 -#define CFG_JFFS2_NUM_BANKS 1 -/* 512k reserved for u-boot */ -#define CFG_JFFS2_FIRST_SECTOR 11 - -/* - * following timeouts shall be used once the - * Flash real protection is enabled - */ -#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ -#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ - -/* - * I2C settings - * By default PF2 is used as SDA and PF3 as SCL on the Stamp board - */ -#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ -/* - * Software (bit-bang) I2C driver configuration - */ -#define PF_SCL PF3 -#define PF_SDA PF2 - -#define I2C_INIT (*pFIO_DIR |= PF_SCL); asm("ssync;") -#define I2C_ACTIVE (*pFIO_DIR |= PF_SDA); *pFIO_INEN &= ~PF_SDA; asm("ssync;") -#define I2C_TRISTATE (*pFIO_DIR &= ~PF_SDA); *pFIO_INEN |= PF_SDA; asm("ssync;") -#define I2C_READ ((volatile)(*pFIO_FLAG_D & PF_SDA) != 0); asm("ssync;") -#define I2C_SDA(bit) if(bit) { \ - *pFIO_FLAG_S = PF_SDA; \ - asm("ssync;"); \ - } \ - else { \ - *pFIO_FLAG_C = PF_SDA; \ - asm("ssync;"); \ - } -#define I2C_SCL(bit) if(bit) { \ - *pFIO_FLAG_S = PF_SCL; \ - asm("ssync;"); \ - } \ - else { \ - *pFIO_FLAG_C = PF_SCL; \ - asm("ssync;"); \ - } -#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ - -#define CFG_I2C_SPEED 50000 -#define CFG_I2C_SLAVE 0xFE - -/* - * Compact Flash settings - */ - -/* Enabled below option for CF support */ -/* #define CONFIG_STAMP_CF 1 */ - -#if defined(CONFIG_STAMP_CF) && (CONFIG_COMMANDS & CFG_CMD_IDE) - -#define CONFIG_MISC_INIT_R 1 -#define CONFIG_DOS_PARTITION 1 - -/* - * IDE/ATA stuff - */ -#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ -#undef CONFIG_IDE_LED /* no led for ide supported */ -#undef CONFIG_IDE_RESET /* no reset for ide supported */ - -#define CFG_IDE_MAXBUS 1 /* max. 1 IDE busses */ -#define CFG_IDE_MAXDEVICE (CFG_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */ - -#define CFG_ATA_BASE_ADDR 0x20200000 -#define CFG_ATA_IDE0_OFFSET 0x0000 - -#define CFG_ATA_DATA_OFFSET 0x0020 /* Offset for data I/O */ -#define CFG_ATA_REG_OFFSET 0x0020 /* Offset for normal register accesses */ -#define CFG_ATA_ALT_OFFSET 0x0007 /* Offset for alternate registers */ - -#define CFG_ATA_STRIDE 2 -#endif - -/* - * SDRAM settings - * - */ - -#define CONFIG_MEM_SIZE 128 /* 128, 64, 32, 16 */ -#define CONFIG_MEM_ADD_WDTH 11 /* 8, 9, 10, 11 */ -#define CONFIG_MEM_MT48LC64M4A2FB_7E 1 - -#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#define CFG_MEMTEST_END 0x07EFFFFF /* 1 ... 127 MB in DRAM */ -#define CFG_LOAD_ADDR 0x01000000 /* default load address */ - -#define CFG_SDRAM_BASE 0x00000000 -#define CFG_MAX_RAM_SIZE 0x08000000 - -#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CFG_MONITOR_BASE (CFG_MAX_RAM_SIZE - CFG_MONITOR_LEN) - -#if ( CONFIG_CLKIN_HALF == 0 ) -#define CONFIG_VCO_HZ ( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) -#else -#define CONFIG_VCO_HZ (( CONFIG_CLKIN_HZ * CONFIG_VCO_MULT ) / 2 ) -#endif - -#if (CONFIG_PLL_BYPASS == 0) -#define CONFIG_CCLK_HZ ( CONFIG_VCO_HZ / CONFIG_CCLK_DIV ) -#define CONFIG_SCLK_HZ ( CONFIG_VCO_HZ / CONFIG_SCLK_DIV ) -#else -#define CONFIG_CCLK_HZ CONFIG_CLKIN_HZ -#define CONFIG_SCLK_HZ CONFIG_CLKIN_HZ -#endif - -/* - * Miscellaneous configurable options - */ -#define CFG_HZ 1000 /* 1ms time tick */ - -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CFG_MALLOC_BASE (CFG_MONITOR_BASE - CFG_MALLOC_LEN) -#define CFG_GBL_DATA_SIZE 0x4000 -#define CFG_GBL_DATA_ADDR (CFG_MALLOC_BASE - CFG_GBL_DATA_SIZE) -#define CONFIG_STACKBASE (CFG_GBL_DATA_ADDR - 4) - -#define CFG_LARGE_IMAGE_LEN 0x4000000 /* Large Image Length, set to 64 Meg */ - -#define CONFIG_SHOW_BOOT_PROGRESS 1 /* Show boot progress on LEDs */ - -/* - * Stack sizes - */ -#define CONFIG_STACKSIZE (128*1024) /* regular stack */ - -/* - * FLASH organization and environment definitions - */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* 0xFF, 0xBBC3BBc3, 0x99B39983 */ -/*#define AMGCTLVAL (AMBEN_P0 | AMBEN_P1 | AMBEN_P2 | AMCKEN) -#define AMBCTL0VAL (B1WAT_11 | B1RAT_11 | B1HT_3 | B1ST_4 | B1TT_4 | B1RDYPOL | \ - B1RDYEN | B0WAT_11 | B0RAT_11 | B0HT_3 | B0ST_4 | B0TT_4 | B0RDYPOL | B0RDYEN) -#define AMBCTL1VAL (B3WAT_9 | B3RAT_9 | B3HT_2 | B3ST_3 | B3TT_4 | B3RDYPOL | \ - B3RDYEN | B2WAT_9 | B2RAT_9 | B2HT_2 | B2ST_4 | B2TT_4 | B2RDYPOL | B2RDYEN) -*/ -#define AMGCTLVAL 0xFF -#define AMBCTL0VAL 0xBBC3BBC3 -#define AMBCTL1VAL 0x99B39983 -#define CF_AMBCTL1VAL 0x99B3ffc2 - -#ifdef CONFIG_VDSP -#define ET_EXEC_VDSP 0x8 -#define SHT_STRTAB_VDSP 0x1 -#define ELFSHDRSIZE_VDSP 0x2C -#define VDSP_ENTRY_ADDR 0xFFA00000 -#endif - -#endif |