diff options
Diffstat (limited to 'include/configs/svm_sc8xx.h')
| -rw-r--r-- | include/configs/svm_sc8xx.h | 450 |
1 files changed, 0 insertions, 450 deletions
diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h deleted file mode 100644 index b4aa948565..0000000000 --- a/include/configs/svm_sc8xx.h +++ /dev/null @@ -1,450 +0,0 @@ -/* - * (C) Copyright 2000, 2001, 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * board/config.h - configuration options, board specific, - * for SinoVee Microsystems SC8xx series SBC - * http://www.fel.com.cn (Chinese) - * http://www.sinovee.com (English) - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_SYS_TEXT_BASE 0x40000000 - -/* Custom configuration */ -/* SC823,SC850,SC860SAR, FEL8xx-AT(823/850/860) */ -/* SC85T,SC860T, FEL8xx-AT(855T/860T) */ -/*#define CONFIG_FEL8xx_AT */ -/*#define CONFIG_LCD */ -/*#define CONFIG_MPC8XX_LCD*/ -/* if core > 50MHz , un-comment CONFIG_BUS_DIV2 */ -/* #define CONFIG_50MHz */ -/* #define CONFIG_66MHz */ -/* #define CONFIG_75MHz */ -#define CONFIG_80MHz -/*#define CONFIG_100MHz */ -/* #define CONFIG_BUS_DIV2 1 */ -/* for BOOT device port size */ -/* #define CONFIG_BOOT_8B */ -#define CONFIG_BOOT_16B -/* #define CONFIG_BOOT_32B */ -/* #define CONFIG_CAN_DRIVER */ -/* #define DEBUG */ -#define CONFIG_FEC_ENET - -/* #define CONFIG_SDRAM_16M */ -#define CONFIG_SDRAM_32M -/* #define CONFIG_SDRAM_64M */ -#define CONFIG_SYS_RESET_ADDRESS 0xffffffff -/* - * High Level Configuration Options - * (easy to change) - */ - -/* #define CONFIG_MPC823 1 */ -/* #define CONFIG_MPC850 1 */ -#define CONFIG_MPC855 1 -/* #define CONFIG_MPC860 1 */ -/* #define CONFIG_MPC860T 1 */ - -#undef CONFIG_WATCHDOG /* watchdog */ - -#define CONFIG_SVM_SC8xx 1 /* ...on SVM SC8xx series */ - -#ifdef CONFIG_LCD /* with LCD controller ? */ -/* #define CONFIG_NEC_NL6448BC20 1 / * use NEC NL6448BC20 display */ -#endif - -#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ -#undef CONFIG_8xx_CONS_SMC2 -#undef CONFIG_8xx_CONS_NONE -#define CONFIG_BAUDRATE 19200 /* console baudrate = 115kbps */ -#if 0 -#define CONFIG_BOOTDELAY -1 /* autoboot disabled */ -#else -#define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ -#endif - -#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ - -#define CONFIG_BOARD_TYPES 1 /* support board types */ - -#define CONFIG_PREBOOT "echo;echo Welcome to U-Boot SVM port;echo;echo Type \"? or help\" to get on-line help;echo" - -#undef CONFIG_BOOTARGS -#define CONFIG_EXTRA_ENV_SETTINGS \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "flash_nfs=run nfsargs addip;" \ - "bootm ${kernel_addr}\0" \ - "flash_self=run ramargs addip;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "net_nfs=tftp 0x210000 ${bootfile};run nfsargs addip;bootm\0" \ - "rootpath=/opt/sinovee/ppc8xx-linux-2.0/target\0" \ - "bootfile=pImage-sc855t\0" \ - "kernel_addr=48000000\0" \ - "ramdisk_addr=48100000\0" \ - "" -#define CONFIG_BOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; " \ - "tftpboot 0x210000 pImage-sc855t;bootm 0x210000" - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ - - -#ifdef CONFIG_LCD -# undef CONFIG_STATUS_LED /* disturbs display */ -#else -# define CONFIG_STATUS_LED 1 /* Status LED enabled */ -#endif /* CONFIG_LCD */ - -#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_BOOTFILESIZE - -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION - -#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DATE - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#ifdef CONFIG_SYS_HUSH_PARSER -#endif - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Low Level Configuration Settings - * (address mappings, register initial values, etc.) - * You should know what you are doing if you make changes here. - */ -/*----------------------------------------------------------------------- - * Internal Memory Mapped Register - */ -#define CONFIG_SYS_IMMR 0xFF000000 - -/*----------------------------------------------------------------------- - * Definitions for initial stack pointer and data area (in DPRAM) - */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR -#define CONFIG_SYS_INIT_RAM_SIZE 0x2F00 /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -/*----------------------------------------------------------------------- - * Start addresses for the final memory configuration - * (Set up by the startup code) - * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 - */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0x40000000 -#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 192 kB for Monitor */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------- - * FLASH organization - */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_ENV_IS_IN_FLASH 1 - -#ifdef CONFIG_BOOT_8B -#define CONFIG_ENV_OFFSET 0x10000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ -#elif defined (CONFIG_BOOT_16B) -#define CONFIG_ENV_OFFSET 0x10000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x10000 /* Total Size of Environment Sector */ -#elif defined (CONFIG_BOOT_32B) -#define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ -#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ -#endif - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - - -/*----------------------------------------------------------------------- - * Hardware Information Block - */ -#define CONFIG_SYS_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */ -#define CONFIG_SYS_HWINFO_SIZE 0x00000040 /* size of HW Info block */ -#define CONFIG_SYS_HWINFO_MAGIC 0x46454C38 /* 'SVM8' */ - -/*----------------------------------------------------------------------- - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ -#endif - -/*----------------------------------------------------------------------- - * SYPCR - System Protection Control 11-9 - * SYPCR can only be written once after reset! - *----------------------------------------------------------------------- - * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze - */ -#if defined(CONFIG_WATCHDOG) -/*#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -*/ -#define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_SWF | \ - SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) -#else -#define CONFIG_SYS_SYPCR 0xffffff88 -#endif - -/*----------------------------------------------------------------------- - * SIUMCR - SIU Module Configuration 11-6 - *----------------------------------------------------------------------- - * PCMCIA config., multi-function pin tri-state - */ -#ifndef CONFIG_CAN_DRIVER -/*#define CONFIG_SYS_SIUMCR 0x00610c00 */ -#define CONFIG_SYS_SIUMCR 0x00000000 -#else /* we must activate GPL5 in the SIUMCR for CAN */ -#define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01) -#endif /* CONFIG_CAN_DRIVER */ - -/*----------------------------------------------------------------------- - * TBSCR - Time Base Status and Control 11-26 - *----------------------------------------------------------------------- - * Clear Reference Interrupt Status, Timebase freezing enabled - */ -#define CONFIG_SYS_TBSCR 0x0001 - -/*----------------------------------------------------------------------- - * RTCSC - Real-Time Clock Status and Control Register 11-27 - *----------------------------------------------------------------------- - */ -#define CONFIG_SYS_RTCSC 0x00c3 - -/*----------------------------------------------------------------------- - * PISCR - Periodic Interrupt Status and Control 11-31 - *----------------------------------------------------------------------- - * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled - */ -#define CONFIG_SYS_PISCR 0x0000 - -/*----------------------------------------------------------------------- - * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 - *----------------------------------------------------------------------- - * Reset PLL lock status sticky bit, timer expired status bit and timer - * interrupt status bit - */ -#if defined (CONFIG_100MHz) -#define CONFIG_SYS_PLPRCR 0x06301000 -#define CONFIG_8xx_GCLK_FREQ 100000000 -#elif defined (CONFIG_80MHz) -#define CONFIG_SYS_PLPRCR 0x04f01000 -#define CONFIG_8xx_GCLK_FREQ 80000000 -#elif defined(CONFIG_75MHz) -#define CONFIG_SYS_PLPRCR 0x04a00100 -#define CONFIG_8xx_GCLK_FREQ 75000000 -#elif defined(CONFIG_66MHz) -#define CONFIG_SYS_PLPRCR 0x04101000 -#define CONFIG_8xx_GCLK_FREQ 66000000 -#elif defined(CONFIG_50MHz) -#define CONFIG_SYS_PLPRCR 0x03101000 -#define CONFIG_8xx_GCLK_FREQ 50000000 -#endif - -/*----------------------------------------------------------------------- - * SCCR - System Clock and reset Control Register 15-27 - *----------------------------------------------------------------------- - * Set clock output, timebase and RTC source and divider, - * power management and some other internal clocks - */ -#define SCCR_MASK SCCR_EBDF11 -#ifdef CONFIG_BUS_DIV2 -#define CONFIG_SYS_SCCR 0x02020000 | SCCR_RTSEL -#else /* up to 50 MHz we use a 1:1 clock */ -#define CONFIG_SYS_SCCR 0x02000000 | SCCR_RTSEL -#endif - -/*----------------------------------------------------------------------- - * PCMCIA stuff - *----------------------------------------------------------------------- - * - */ -#define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) -#define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) -#define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) -#define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) -#define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) -#define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) - -/*----------------------------------------------------------------------- - * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) - *----------------------------------------------------------------------- - */ - -#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ - -#define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */ -#define CONFIG_IDE_INIT_POSTRESET 1 /* Use postreset IDE hook */ -#define CONFIG_IDE_8xx_DIRECT 1 /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ -#undef CONFIG_IDE_RESET /* reset for ide not supported */ - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_BASE_ADDR 0xFE100010 -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -/*#define CONFIG_SYS_ATA_IDE1_OFFSET 0x0C00 */ -#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O - */ -#define CONFIG_SYS_ATA_REG_OFFSET 0x0200 /* Offset for normal register accesses - */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x0210 /* Offset for alternate registers - */ -#define CONFIG_ATAPI -#define CONFIG_SYS_PIO_MODE 0 - -/*----------------------------------------------------------------------- - * - *----------------------------------------------------------------------- - * - */ -/*#define CONFIG_SYS_DER 0x2002000F*/ -#define CONFIG_SYS_DER 0x0 - -/* - * Init Memory Controller: - * - * BR0/1 and OR0/1 (FLASH) - */ - -#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ -#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */ - -/* used to re-map FLASH both when starting from SRAM or FLASH: - * restrict access enough to keep SRAM working (if any) - * but not too much to meddle with FLASH accesses - */ -#define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */ -#define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ - -/* - * FLASH timing: - */ -#if defined(CONFIG_100MHz) -#define CONFIG_SYS_OR_TIMING_FLASH 0x000002f4 -#define CONFIG_SYS_OR_TIMING_DOC 0x000002f4 -#define CONFIG_SYS_MxMR_PTx 0x61000000 -#define CONFIG_SYS_MPTPR 0x400 - -#elif defined(CONFIG_80MHz) -#define CONFIG_SYS_OR_TIMING_FLASH 0x00000ff4 -#define CONFIG_SYS_OR_TIMING_DOC 0x000001f4 -#define CONFIG_SYS_MxMR_PTx 0x4e000000 -#define CONFIG_SYS_MPTPR 0x400 - -#elif defined(CONFIG_75MHz) -#define CONFIG_SYS_OR_TIMING_FLASH 0x000008f4 -#define CONFIG_SYS_OR_TIMING_DOC 0x000002f4 -#define CONFIG_SYS_MxMR_PTx 0x49000000 -#define CONFIG_SYS_MPTPR 0x400 - -#elif defined(CONFIG_66MHz) -#define CONFIG_SYS_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \ - OR_SCY_3_CLK | OR_EHTR | OR_BI) -/*#define CONFIG_SYS_OR_TIMING_FLASH 0x000001f4 */ -#define CONFIG_SYS_OR_TIMING_DOC 0x000003f4 -#define CONFIG_SYS_MxMR_PTx 0x40000000 -#define CONFIG_SYS_MPTPR 0x400 - -#else /* 50 MHz */ -#define CONFIG_SYS_OR_TIMING_FLASH 0x00000ff4 -#define CONFIG_SYS_OR_TIMING_DOC 0x000001f4 -#define CONFIG_SYS_MxMR_PTx 0x30000000 -#define CONFIG_SYS_MPTPR 0x400 -#endif /*CONFIG_??MHz */ - - -#if defined (CONFIG_BOOT_8B) /* 512K X 8 ,29F040 , 2MB space */ -#define CONFIG_SYS_OR0_PRELIM (0xffe00000 | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_8) -#elif defined (CONFIG_BOOT_16B) /* 29lv160 X 16 , 4MB space */ -#define CONFIG_SYS_OR0_PRELIM (0xffc00000 | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16) -#elif defined( CONFIG_BOOT_32B ) /* 29lv160 X 2 X 32, 4/8/16MB , 64MB space */ -#define CONFIG_SYS_OR0_PRELIM (0xfc000000 | CONFIG_SYS_OR_TIMING_FLASH) -#define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V ) -#else -#error Boot device port size missing. -#endif - -/* - * Disk-On-Chip configuration - */ - -#define CONFIG_SYS_DOC_SHORT_TIMEOUT -#define CONFIG_SYS_MAX_DOC_DEVICE 1 /* Max number of DOC devices */ - -#define CONFIG_SYS_DOC_SUPPORT_2000 -#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM -#define CONFIG_SYS_DOC_BASE 0x80000000 - -#endif /* __CONFIG_H */ |