diff options
Diffstat (limited to 'include/configs/tnetv107x_evm.h')
| -rw-r--r-- | include/configs/tnetv107x_evm.h | 139 |
1 files changed, 0 insertions, 139 deletions
diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h deleted file mode 100644 index 00a1a9e002..0000000000 --- a/include/configs/tnetv107x_evm.h +++ /dev/null @@ -1,139 +0,0 @@ -/* - * Copyright (C) 2008 Texas Instruments, Inc <www.ti.com> - * - * Based on davinci_dvevm.h. Original Copyrights follow: - * - * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#include <linux/sizes.h> -#include <asm/arch/hardware.h> -#include <asm/arch/clock.h> - -/* Architecture, CPU, etc */ -#define CONFIG_TNETV107X -#define CONFIG_TNETV107X_EVM -#define CONFIG_TNETV107X_WATCHDOG -#define CONFIG_ARCH_CPU_INIT -#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_DISABLE_TCM -#define CONFIG_PERIPORT_REMAP -#define CONFIG_PERIPORT_BASE 0x2000000 -#define CONFIG_PERIPORT_SIZE 0x10 -#define CONFIG_SYS_CLK_FREQ clk_get_rate(TNETV107X_LPSC_ARM) - -#define CONFIG_SYS_TIMERBASE TNETV107X_TIMER0_BASE -#define CONFIG_SYS_HZ_CLOCK clk_get_rate(TNETV107X_LPSC_TIMER0) - -#define CONFIG_PLL_SYS_EXT_FREQ 25000000 -#define CONFIG_PLL_TDM_EXT_FREQ 19200000 -#define CONFIG_PLL_ETH_EXT_FREQ 25000000 - -/* Memory Info */ -#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) -#define PHYS_SDRAM_1 TNETV107X_DDR_EMIF_DATA_BASE -#define PHYS_SDRAM_1_SIZE 0x04000000 -#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 -#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 16*1024*1024) -#define CONFIG_NR_DRAM_BANKS 1 - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -/* Serial Driver Info */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE -4 -#define CONFIG_SYS_NS16550_COM1 TNETV107X_UART1_BASE -#define CONFIG_SYS_NS16550_CLK clk_get_rate(TNETV107X_LPSC_UART1) -#define CONFIG_CONS_INDEX 1 -#define CONFIG_BAUDRATE 115200 - -/* Flash and environment info */ -#define CONFIG_SYS_NO_FLASH -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_NAND_DAVINCI -#define CONFIG_ENV_SIZE (SZ_128K) -#define CONFIG_SYS_NAND_HW_ECC -#define CONFIG_SYS_NAND_1BIT_ECC -#define CONFIG_SYS_NAND_CS 2 -#define CONFIG_SYS_NAND_USE_FLASH_BBT -#define CONFIG_SYS_NAND_BASE TNETV107X_ASYNC_EMIF_DATA_CE0_BASE -#define CONFIG_SYS_NAND_MASK_CLE 0x10 -#define CONFIG_SYS_NAND_MASK_ALE 0x8 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_PARTITIONS -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE -#define CONFIG_JFFS2_NAND -#define CONFIG_ENV_OFFSET 0x180000 - -/* - * davinci_nand is a bit of a misnomer since this particular EMIF block is - * commonly used across multiple TI devices. Unfortunately, this misnomer - * (amongst others) carries forward into the kernel too. Consequently, if we - * use a different device name here, the mtdparts variable won't be usable as - * a kernel command-line argument. - */ -#define MTDIDS_DEFAULT "nand0=davinci_nand.0" -#define MTDPARTS_DEFAULT "mtdparts=davinci_nand.0:" \ - "1536k(uboot)ro," \ - "128k(params)ro," \ - "4m(kernel)," \ - "-(filesystem)" - -/* General U-Boot configuration */ -#define CONFIG_BOOTFILE "uImage" -#define CONFIG_SYS_PROMPT "U-Boot > " -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_MAXARGS 64 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -#define CONFIG_VERSION_VARIABLE -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CMDLINE_EDITING -#define CONFIG_SYS_LONGHELP -#define CONFIG_CRC32_VERIFY -#define CONFIG_MX_CYCLIC -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_MEMTEST_START + \ - 0x700000) -#define LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_MEMTEST_START + 0x100) -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_BOOTARGS "mem=32M console=ttyS1,115200n8 " \ - "root=/dev/mmcblk0p1 rw noinitrd" -#define CONFIG_BOOTCOMMAND "" -#define CONFIG_BOOTDELAY 1 - -#define CONFIG_CMD_BDI -#define CONFIG_CMD_BOOTD -#define CONFIG_CMD_CONSOLE -#define CONFIG_CMD_ECHO -#define CONFIG_CMD_EDITENV -#define CONFIG_CMD_IMI -#define CONFIG_CMD_ITEST -#define CONFIG_CMD_LOADB -#define CONFIG_CMD_LOADS -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_MISC -#define CONFIG_CMD_RUN -#define CONFIG_CMD_SAVEENV -#define CONFIG_CMD_SOURCE -#define CONFIG_CMD_ENV -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_SAVES -#define CONFIG_CMD_MEMORY -#define CONFIG_CMD_NAND -#define CONFIG_CMD_JFFS2 - -#endif /* __CONFIG_H */ |