diff options
Diffstat (limited to 'include/configs/vme8349.h')
| -rw-r--r-- | include/configs/vme8349.h | 98 |
1 files changed, 56 insertions, 42 deletions
diff --git a/include/configs/vme8349.h b/include/configs/vme8349.h index f9db73b2dc..dbc15b297f 100644 --- a/include/configs/vme8349.h +++ b/include/configs/vme8349.h @@ -35,6 +35,13 @@ #define __CONFIG_H /* + * Top level Makefile configuration choices + */ +#ifdef CONFIG_MK_caddy2 +#define VME_CADDY2 +#endif + +/* * High Level Configuration Options */ #define CONFIG_E300 1 /* E300 Family */ @@ -43,6 +50,8 @@ #define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_VME8349 1 /* ESD VME8349 board specific */ +#define CONFIG_MISC_INIT_R + #define CONFIG_PCI /* Don't enable PCI2 on vme834x - it doesn't exist physically. */ #undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */ @@ -75,7 +84,9 @@ */ #define CONFIG_DDR_ECC /* only for ECC DDR module */ #define CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */ -#undef CONFIG_SPD_EEPROM /* dont use SPD EEPROM for DDR setup*/ +#define CONFIG_SPD_EEPROM +#define SPD_EEPROM_ADDRESS 0x54 +#define CONFIG_SYS_READ_SPD vme8349_read_spd #define CONFIG_SYS_83XX_DDR_USES_CS0 /* esd; Fsl board uses CS2/CS3 */ /* @@ -96,54 +107,40 @@ #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075) #define CONFIG_DDR_2T_TIMING - -/* - * Manually set up DDR parameters - */ -#define CONFIG_SYS_DDR_SIZE 512 /* MB */ - -#if (CONFIG_SYS_DDR_SIZE == 512) -#define CONFIG_SYS_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | \ - CSCONFIG_COL_BIT_10 | \ - CSCONFIG_BANK_BIT_3) -#endif - -/* - * Manually set up DDR parameters - */ -#define CONFIG_SYS_DDR_TIMING_0 0x00220802 -#define CONFIG_SYS_DDR_TIMING_1 0x39377322 -#define CONFIG_SYS_DDR_TIMING_2 0x2f9848ca /* P9-45, tuning? */ -#define CONFIG_SYS_DDR_TIMING_3 0x00000000 -#define CONFIG_SYS_DDR_CONTROL 0xc2000000 /* unbuf,no DYN_PWR */ -#define CONFIG_SYS_DDR_MODE 0x07940242 -#define CONFIG_SYS_DDR_MODE2 0x00000000 -/* autocharge,no open page */ -#define CONFIG_SYS_DDR_INTERVAL 0x04060100 -#define CONFIG_SYS_DDR_SDRAM_CFG 0x63000000 -#define CONFIG_SYS_DDR_SDRAM_CFG2 0x04061000 +#define CONFIG_SYS_DDRCDR 0x80080001 /* * FLASH on the Local Bus */ #define CONFIG_SYS_FLASH_CFI #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ -#define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH */ -#define CONFIG_SYS_FLASH_SIZE 128 /* flash size in MB */ -/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */ +#ifdef VME_CADDY2 +#define CONFIG_SYS_FLASH_BASE 0xffc00000 /* start of FLASH */ +#define CONFIG_SYS_FLASH_SIZE 4 /* flash size in MB */ +#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ + (2 << BR_PS_SHIFT) | /* 32bit */ \ + BR_V) /* valid */ +#define CONFIG_SYS_OR0_PRELIM 0xffc06ff7 /* 4 MB flash size */ +#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000015 /* 4 MB window size */ +#else +#define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH */ +#define CONFIG_SYS_FLASH_SIZE 128 /* flash size in MB */ #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \ (2 << BR_PS_SHIFT) | /* 32bit */ \ BR_V) /* valid */ -#define CONFIG_SYS_OR0_PRELIM 0xF8006FF7 /* 128 MB flash size */ +#define CONFIG_SYS_OR0_PRELIM 0xf8006ff7 /* 128 MB flash size */ #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_LBLAWAR0_PRELIM 0x8000001A /* 128 MB window size */ +#define CONFIG_SYS_LBLAWAR0_PRELIM 0x8000001a /* 128 MB window size */ +#endif +/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */ #define CONFIG_SYS_BR1_PRELIM (0xf0000000 | 0x00001801) -#define CONFIG_SYS_OR1_PRELIM (0xffff8000 | 0x00000200) +#define CONFIG_SYS_OR1_PRELIM (0xfffc0008 | 0x00000200) #define CONFIG_SYS_LBLAWBAR1_PRELIM 0xf0000000 -#define CONFIG_SYS_LBLAWAR1_PRELIM (0x80000000 | 0x0000000e) +#define CONFIG_SYS_LBLAWAR1_PRELIM (0x80000000 | 0x00000011) #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device*/ @@ -157,7 +154,7 @@ #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) #define CONFIG_SYS_RAMBOOT #else -#undef CONFIG_SYS_RAMBOOT +#undef CONFIG_SYS_RAMBOOT #endif #define CONFIG_SYS_INIT_RAM_LOCK 1 @@ -174,11 +171,10 @@ /* * Local Bus LCRR and LBCR regs - * LCRR: DLL bypass, Clock divider is 4 + * LCRR: no DLL bypass, Clock divider is 4 * External Local Bus rate is * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV */ -#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 #define CONFIG_SYS_LBC_LBCR 0x00000000 @@ -268,10 +264,10 @@ #undef PCI_ONE_PCI1 #endif -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ - +#ifndef VME_CADDY2 #define CONFIG_NET_MULTI +#endif +#define CONFIG_PCI_PNP /* do pci plug-and-play */ #undef CONFIG_EEPRO100 #undef CONFIG_TULIP @@ -282,19 +278,26 @@ #define PCI_IDSEL_NUMBER 0xFIXME #endif +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ + #endif /* CONFIG_PCI */ /* * TSEC configuration */ +#ifdef VME_CADDY2 +#define CONFIG_E1000 +#else #define CONFIG_TSEC_ENET /* TSEC ethernet support */ +#endif #if defined(CONFIG_TSEC_ENET) #ifndef CONFIG_NET_MULTI #define CONFIG_NET_MULTI #endif -#define CONFIG_GMII /* MII PHY management */ +#define CONFIG_GMII /* MII PHY management */ #define CONFIG_TSEC1 #define CONFIG_TSEC1_NAME "TSEC0" #define CONFIG_TSEC2 @@ -312,6 +315,12 @@ #endif /* CONFIG_TSEC_ENET */ +#if defined(CONFIG_E1000) +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI +#endif +#endif + /* * Environment */ @@ -560,7 +569,7 @@ #define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ #undef CONFIG_BOOTARGS /* boot command will set bootargs */ -#define CONFIG_BAUDRATE 115200 +#define CONFIG_BAUDRATE 9600 #define CONFIG_EXTRA_ENV_SETTINGS \ "netdev=eth0\0" \ @@ -605,4 +614,9 @@ #define CONFIG_BOOTCOMMAND "run flash_self" +#ifndef __ASSEMBLY__ +int vme8349_read_spd(unsigned char chip, unsigned int addr, int alen, + unsigned char *buffer, int len); +#endif + #endif /* __CONFIG_H */ |