diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/ls1088a_common.h | 25 | ||||
| -rw-r--r-- | include/configs/ls1088ardb.h | 30 |
2 files changed, 53 insertions, 2 deletions
diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 7cfdc96df2..6b71d47c5a 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -20,18 +20,24 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0) /* Link Definitions */ +#ifdef CONFIG_SPL +#define CONFIG_SYS_TEXT_BASE 0x80400000 +#else #ifdef CONFIG_QSPI_BOOT #define CONFIG_SYS_TEXT_BASE 0x20100000 #else #define CONFIG_SYS_TEXT_BASE 0x30100000 #endif +#endif #define CONFIG_SUPPORT_RAW_INITRD #define CONFIG_SKIP_LOWLEVEL_INIT +#if !defined(CONFIG_SD_BOOT) #define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */ +#endif #define CONFIG_VERY_BIG_RAM #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL @@ -200,6 +206,11 @@ unsigned long long get_qixis_addr(void); " fsl_mc apply dpl 0x80200000 &&" \ " sf read $kernel_load $kernel_start" \ " $kernel_size && bootm $kernel_load" +#elif defined(CONFIG_SD_BOOT) +#define CONFIG_BOOTCOMMAND "mmcinfo;mmc read 0x80200000 0x6800 0x800;"\ + " fsl_mc apply dpl 0x80200000 &&" \ + " mmc read $kernel_load $kernel_start" \ + " $kernel_size && bootm $kernel_load" #else /* NOR BOOT*/ #define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580d00000 &&" \ " cp.b $kernel_start $kernel_load" \ @@ -219,6 +230,20 @@ unsigned long long get_qixis_addr(void); #define CONFIG_PANIC_HANG /* do not reset board on panic */ +#ifdef CONFIG_SPL +#define CONFIG_SPL_BSS_START_ADDR 0x80100000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" +#define CONFIG_SPL_MAX_SIZE 0x16000 +#define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0) +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SPL_TEXT_BASE 0x1800a000 + +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 +#define CONFIG_SYS_SPL_MALLOC_START 0x80200000 +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#endif #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ #endif /* __LS1088_COMMON_H */ diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index 958d472e4d..eef9a07cd9 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -15,6 +15,10 @@ #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ #define CONFIG_ENV_OFFSET 0x300000 /* 3MB */ #define CONFIG_ENV_SECT_SIZE 0x40000 +#elif defined(CONFIG_SD_BOOT) +#define CONFIG_ENV_OFFSET (3 * 1024 * 1024) +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_SIZE 0x2000 #else #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) @@ -22,9 +26,10 @@ #define CONFIG_ENV_SIZE 0x20000 #endif -#if defined(CONFIG_QSPI_BOOT) +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_QIXIS_I2C_ACCESS #define SYS_NO_FLASH +#undef CONFIG_CMD_IMLS #endif #define CONFIG_SYS_CLK_FREQ 100000000 @@ -232,7 +237,7 @@ #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 /* QSPI device */ -#if defined(CONFIG_QSPI_BOOT) +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_FSL_QSPI #define FSL_QSPI_FLASH_SIZE (1 << 26) #define FSL_QSPI_FLASH_NUM 2 @@ -243,7 +248,11 @@ #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END 0x9fffffff +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE +#else #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#endif #define CONFIG_FSL_MEMAC @@ -265,6 +274,23 @@ "sf read 0x80100000 0xE00000 0x100000;" \ "fsl_mc start mc 0x80000000 0x80100000\0" \ "mcmemsize=0x70000000 \0" +#elif defined(CONFIG_SD_BOOT) +#undef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:bank_intlv=auto\0" \ + "loadaddr=0x90100000\0" \ + "kernel_addr=0x800\0" \ + "ramdisk_addr=0x800000\0" \ + "ramdisk_size=0x2000000\0" \ + "fdt_high=0xa0000000\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "kernel_start=0x8000\0" \ + "kernel_load=0xa0000000\0" \ + "kernel_size=0x14000\0" \ + "mcinitcmd=mmcinfo;mmc read 0x80000000 0x5000 0x800;" \ + "mmc read 0x80100000 0x7000 0x800;" \ + "fsl_mc start mc 0x80000000 0x80100000\0" \ + "mcmemsize=0x70000000 \0" #endif |