diff options
Diffstat (limited to 'include/configs')
80 files changed, 456 insertions, 236 deletions
diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h index f1608e145f..527c846502 100644 --- a/include/configs/CRAYL1.h +++ b/include/configs/CRAYL1.h @@ -86,7 +86,7 @@ #define CONFIG_CMD_FLASH #define CONFIG_CMD_MEMORY #define CONFIG_CMD_NET -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_CONSOLE #define CONFIG_CMD_ASKENV #define CONFIG_CMD_ECHO diff --git a/include/configs/EP1S10.h b/include/configs/EP1S10.h index 63a0d3d6a1..53bd0d87c9 100644 --- a/include/configs/EP1S10.h +++ b/include/configs/EP1S10.h @@ -170,7 +170,7 @@ #define CONFIG_CMD_BDI #define CONFIG_CMD_DHCP #define CONFIG_CMD_ECHO -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_FLASH #define CONFIG_CMD_IMI #define CONFIG_CMD_IRQ diff --git a/include/configs/EP1S40.h b/include/configs/EP1S40.h index 36e1f81739..9e9a8a4ab0 100644 --- a/include/configs/EP1S40.h +++ b/include/configs/EP1S40.h @@ -170,7 +170,7 @@ #define CONFIG_CMD_BDI #define CONFIG_CMD_DHCP #define CONFIG_CMD_ECHO -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_FLASH #define CONFIG_CMD_IMI #define CONFIG_CMD_IRQ diff --git a/include/configs/ERIC.h b/include/configs/ERIC.h index 1b766a7dcb..201e62aa04 100644 --- a/include/configs/ERIC.h +++ b/include/configs/ERIC.h @@ -114,7 +114,7 @@ #define CONFIG_CMD_PCI #define CONFIG_CMD_IRQ -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_FLASH diff --git a/include/configs/FLAGADM.h b/include/configs/FLAGADM.h index 1ef8067963..d8312384df 100644 --- a/include/configs/FLAGADM.h +++ b/include/configs/FLAGADM.h @@ -83,7 +83,7 @@ #define CONFIG_CMD_FLASH #define CONFIG_CMD_LOADB #define CONFIG_CMD_LOADS -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_REGINFO #define CONFIG_CMD_IMMAP #define CONFIG_CMD_NET diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 58a26e117e..0ef4ebaec7 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -430,7 +430,7 @@ #define CONFIG_CMD_PCI #if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT) - #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_LOADS #endif diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index a04868ec67..9fa91f4f6d 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -434,7 +434,7 @@ #define CONFIG_CMD_PCI #if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_LOADS #endif diff --git a/include/configs/MPC8323ERDB.h b/include/configs/MPC8323ERDB.h index c6ac91a536..4eab285712 100644 --- a/include/configs/MPC8323ERDB.h +++ b/include/configs/MPC8323ERDB.h @@ -427,7 +427,7 @@ #define CONFIG_CMD_PCI #endif #if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_LOADS #endif diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h index ad8ea89ef7..ea1928eae9 100644 --- a/include/configs/MPC832XEMDS.h +++ b/include/configs/MPC832XEMDS.h @@ -441,7 +441,7 @@ #endif #if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_LOADS #endif diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h index 8e82aac7b7..b3c0e2dd5c 100644 --- a/include/configs/MPC8349EMDS.h +++ b/include/configs/MPC8349EMDS.h @@ -509,7 +509,7 @@ #endif #if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_LOADS #endif diff --git a/include/configs/MPC8360EMDS.h b/include/configs/MPC8360EMDS.h index fbd2457aaf..bdd6b87ad3 100644 --- a/include/configs/MPC8360EMDS.h +++ b/include/configs/MPC8360EMDS.h @@ -470,7 +470,7 @@ #endif #if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_LOADS #endif diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h index c20f86aa23..f7ebdaad72 100644 --- a/include/configs/MPC8360ERDK.h +++ b/include/configs/MPC8360ERDK.h @@ -376,7 +376,7 @@ #endif #if defined(CONFIG_SYS_RAMBOOT) -#undef CONFIG_CMD_ENV +#undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_LOADS #endif diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 75b67b4590..a62d805a9a 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -497,7 +497,7 @@ extern int board_pci_host_broken(void); #endif #if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_LOADS #endif diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index f281c59d3c..2e31dd00a8 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -481,7 +481,7 @@ #endif #if defined(CONFIG_SYS_RAMBOOT) -#undef CONFIG_CMD_ENV +#undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_LOADS #endif diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 0d03b0b85f..4aaad55b53 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -423,7 +423,7 @@ #endif #if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_LOADS #endif diff --git a/include/configs/MPC8540EVAL.h b/include/configs/MPC8540EVAL.h index 5ac1916cbd..95ea275839 100644 --- a/include/configs/MPC8540EVAL.h +++ b/include/configs/MPC8540EVAL.h @@ -300,7 +300,7 @@ #endif #if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH) - #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_LOADS #endif diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index 3f78a6e120..a41f50a173 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -457,7 +457,7 @@ #endif #if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_LOADS #endif diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 7a9e57fdc5..1091043c01 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -489,7 +489,7 @@ #define CONFIG_CMD_MII #if defined(CONFIG_SYS_RAMBOOT) -#undef CONFIG_CMD_ENV +#undef CONFIG_CMD_SAVEENV #endif #if defined(CONFIG_PCI) diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 9a1b84756c..9d661010d3 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -649,7 +649,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_CMD_REGINFO #if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_SAVEENV #endif #if defined(CONFIG_PCI) diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h index 31b9f038b5..79c20696fa 100644 --- a/include/configs/MVBLUE.h +++ b/include/configs/MVBLUE.h @@ -85,7 +85,7 @@ #define CONFIG_CMD_CACHE #define CONFIG_CMD_DHCP #define CONFIG_CMD_ECHO -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_FLASH #define CONFIG_CMD_IMI #define CONFIG_CMD_IRQ diff --git a/include/configs/MVS1.h b/include/configs/MVS1.h index b036127978..10210f0400 100644 --- a/include/configs/MVS1.h +++ b/include/configs/MVS1.h @@ -92,7 +92,7 @@ #define CONFIG_CMD_MEMORY #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_BOOTD #define CONFIG_CMD_RUN diff --git a/include/configs/MigoR.h b/include/configs/MigoR.h index e171f76b5a..c9589bd876 100644 --- a/include/configs/MigoR.h +++ b/include/configs/MigoR.h @@ -40,7 +40,7 @@ #define CONFIG_CMD_NFS #define CONFIG_CMD_DFL #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTDELAY 3 diff --git a/include/configs/PATI.h b/include/configs/PATI.h index 9d80ce4132..88e9528952 100644 --- a/include/configs/PATI.h +++ b/include/configs/PATI.h @@ -57,7 +57,7 @@ #define CONFIG_CMD_REGINFO #define CONFIG_CMD_FLASH #define CONFIG_CMD_LOADS -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_REGINFO #define CONFIG_CMD_BDI #define CONFIG_CMD_CONSOLE diff --git a/include/configs/PCI5441.h b/include/configs/PCI5441.h index 481e3354be..831a60d9a0 100644 --- a/include/configs/PCI5441.h +++ b/include/configs/PCI5441.h @@ -137,7 +137,7 @@ */ #define CONFIG_CMD_BDI #define CONFIG_CMD_ECHO -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_FLASH #define CONFIG_CMD_IMI #define CONFIG_CMD_IRQ diff --git a/include/configs/PK1C20.h b/include/configs/PK1C20.h index 5b1fcff9c2..522349f788 100644 --- a/include/configs/PK1C20.h +++ b/include/configs/PK1C20.h @@ -177,7 +177,7 @@ #define CONFIG_CMD_BDI #define CONFIG_CMD_DHCP #define CONFIG_CMD_ECHO -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_FLASH #define CONFIG_CMD_IMI #define CONFIG_CMD_IRQ diff --git a/include/configs/PM854.h b/include/configs/PM854.h index 41e290d0b1..3f943aa437 100644 --- a/include/configs/PM854.h +++ b/include/configs/PM854.h @@ -331,7 +331,7 @@ #endif #if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_LOADS #endif diff --git a/include/configs/PM856.h b/include/configs/PM856.h index 6b4e2dd42d..43c2873e37 100644 --- a/include/configs/PM856.h +++ b/include/configs/PM856.h @@ -330,7 +330,7 @@ #endif #if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_LOADS #endif diff --git a/include/configs/PMC405.h b/include/configs/PMC405.h index 43e95320cd..c598d00cf0 100644 --- a/include/configs/PMC405.h +++ b/include/configs/PMC405.h @@ -12,7 +12,7 @@ * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License @@ -21,16 +21,11 @@ * MA 02111-1307 USA */ -/* - * board/config.h - configuration options, board specific - */ - #ifndef __CONFIG_H #define __CONFIG_H /* * High Level Configuration Options - * (easy to change) */ #define CONFIG_405GP 1 /* This is a PPC405 CPU */ @@ -45,13 +40,22 @@ #define CONFIG_BAUDRATE 9600 #define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ -#undef CONFIG_BOOTARGS -#undef CONFIG_BOOTCOMMAND +/* Only interrupt boot if space is pressed. */ +#define CONFIG_AUTOBOOT_KEYED 1 +#define CONFIG_AUTOBOOT_PROMPT \ + "Press SPACE to abort autoboot in %d seconds\n", bootdelay +#undef CONFIG_AUTOBOOT_DELAY_STR +#define CONFIG_AUTOBOOT_STOP_STR " " + +#undef CONFIG_BOOTARGS +#undef CONFIG_BOOTCOMMAND -#define CONFIG_PREBOOT /* enable preboot variable */ +#define CONFIG_PREBOOT /* enable preboot variable */ + +#define CFG_BOOTM_LEN 0x1000000 /* support booting of huge images */ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ #define CONFIG_NET_MULTI 1 #undef CONFIG_HAS_ETH1 @@ -59,11 +63,8 @@ #define CONFIG_PPC4xx_EMAC #define CONFIG_MII 1 /* MII PHY management */ #define CONFIG_PHY_ADDR 0 /* PHY address */ -#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ -#define CONFIG_RESET_PHY_R 1 /* use reset_phy() to disable phy sleep mode */ - -#define CONFIG_NETCONSOLE /* include NetConsole support */ - +#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */ +#define CONFIG_RESET_PHY_R 1 /* use reset_phy() */ /* * BOOTP options @@ -73,7 +74,6 @@ #define CONFIG_BOOTP_GATEWAY #define CONFIG_BOOTP_HOSTNAME - /* * Command line configuration. */ @@ -91,249 +91,241 @@ #define CONFIG_CMD_UNIVERSE #define CONFIG_CMD_EEPROM - #define CONFIG_MAC_PARTITION #define CONFIG_DOS_PARTITION -#undef CONFIG_WATCHDOG /* watchdog disabled */ +#undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_RTC_MC146818 /* DS1685 is MC146818 compatible*/ -#define CONFIG_SYS_RTC_REG_BASE_ADDR 0xF0000500 /* RTC Base Address */ +#define CONFIG_RTC_MC146818 /* DS1685 is MC146818 compatible */ +#define CONFIG_SYS_RTC_REG_BASE_ADDR 0xF0000500 /* RTC Base Address */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ /* * Miscellaneous configurable options */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ -#undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#ifdef CONFIG_SYS_HUSH_PARSER +#undef CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#ifdef CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #endif #if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ #endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Sz */ -#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */ +#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */ -#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/ +#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* don't print console info */ -#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ +#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */ -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ -#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */ -#define CONFIG_SYS_BASE_BAUD 691200 +#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock */ +#define CONFIG_SYS_BASE_BAUD 806400 /* The following table includes the supported baudrates */ #define CONFIG_SYS_BAUDRATE_TABLE \ - { 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \ - 57600, 115200, 230400, 460800, 921600 } + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ +#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ -#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ -#define CONFIG_SYS_RX_ETH_BUFFER 16 /* use 16 rx buffer on 405 emac */ +#define CONFIG_SYS_RX_ETH_BUFFER 16 -/*----------------------------------------------------------------------- +/* * PCI stuff - *----------------------------------------------------------------------- */ -#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */ -#define PCI_HOST_FORCE 1 /* configure as pci host */ -#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ +#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */ +#define PCI_HOST_FORCE 1 /* configure as pci host */ +#define PCI_HOST_AUTO 2 /* detected via arbiter enable */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ - /* resource configuration */ +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_HOST PCI_HOST_AUTO /* select pci host function */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ + /* resource configuration */ -#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */ +#define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */ -#define CONFIG_PCI_CONFIG_HOST_BRIDGE 1 /* don't skip host bridge config*/ +#define CONFIG_PCI_CONFIG_HOST_BRIDGE 1 /* don't skip host bridge config */ -#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/ - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */ -#define CONFIG_SYS_PCI_SUBSYS_DEVICEID_NONMONARCH 0x0408 /* PCI Device ID: Non-Monarch */ -#define CONFIG_SYS_PCI_SUBSYS_DEVICEID_MONARCH 0x0409 /* PCI Device ID: Monarch */ +#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */ +#define CONFIG_SYS_PCI_SUBSYS_DEVICEID_NONMONARCH 0x0408 /* PCI Device ID */ +#define CONFIG_SYS_PCI_SUBSYS_DEVICEID_MONARCH 0x0409 /* PCI Device ID */ #define CONFIG_SYS_PCI_SUBSYS_DEVICEID pmc405_pci_subsys_deviceid() -#define CONFIG_SYS_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/ - -#define CONFIG_SYS_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */ -#define CONFIG_SYS_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable hard-wired to 1 */ -#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ -#if 1 -#define CONFIG_SYS_PCI_PTM2LA 0xef000000 /* point to internal regs */ -#define CONFIG_SYS_PCI_PTM2MS 0xff000001 /* 16MB, enable */ -#define CONFIG_SYS_PCI_PTM2PCI 0x00000000 /* Host: use this pci address */ -#else /* old mapping */ -#define CONFIG_SYS_PCI_PTM2LA 0xffc00000 /* point to flash */ -#define CONFIG_SYS_PCI_PTM2MS 0xffc00001 /* 4MB, enable */ -#define CONFIG_SYS_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */ -#endif -/*----------------------------------------------------------------------- +#define CONFIG_SYS_PCI_CLASSCODE 0x0b20 /* Processor/PPC */ + +#define CONFIG_SYS_PCI_PTM1LA (bd->bi_memstart) /* point to sdram */ +#define CONFIG_SYS_PCI_PTM1MS (~(bd->bi_memsize - 1) | 1) /* memsize, enable */ +#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ +#define CONFIG_SYS_PCI_PTM2LA 0xef000000 /* point to internal regs */ +#define CONFIG_SYS_PCI_PTM2MS 0xff000001 /* 16MB, enable */ +#define CONFIG_SYS_PCI_PTM2PCI 0x00000000 /* Host: use this pci address */ + +/* * Start addresses for the final memory configuration * (Set up by the startup code) * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_MONITOR_BASE 0xFFFC0000 -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN (~(TEXT_BASE) + 1) +#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* 128 kB for malloc() */ + +#define CONFIG_PRAM 0 /* use pram variable to overwrite */ /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ -/*----------------------------------------------------------------------- +/* * FLASH organization */ #define CONFIG_SYS_FLASH_BASE 0xFE000000 #define CONFIG_SYS_FLASH_INCREMENT 0x01000000 -#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* don't use hardware protection */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_INCREMENT } -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ +#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CONFIG_SYS_FLASH_PROTECTION 1 /* don't use hardware protection */ +#define CONFIG_SYS_FLASH_AUTOPROTECT_LIST {{0xfff80000, 0x80000}} +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (faster) */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks */ +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, \ + CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_INCREMENT} +#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ +#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on fli */ /* - * JFFS2 partitions - second bank contains u-boot - * - */ -/* No command line, one static partition, whole device */ -#undef CONFIG_JFFS2_CMDLINE -#define CONFIG_JFFS2_DEV "nor0" -#define CONFIG_JFFS2_PART_SIZE 0x01b00000 -#define CONFIG_JFFS2_PART_OFFSET 0x00400000 - -/* mtdparts command line support */ -/* Note: fake mtd_id used, no linux mtd map file */ -/* -#define CONFIG_JFFS2_CMDLINE -#define MTDIDS_DEFAULT "nor0=pmc405-0" -#define MTDPARTS_DEFAULT "mtdparts=pmc405-0:-(jffs2)" -*/ - -/*----------------------------------------------------------------------- * Environment Variable setup */ #define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ -#define CONFIG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */ -#define CONFIG_ENV_SIZE 0x800 /* 2048 bytes may be used for env vars*/ - /* total size of a CAT24WC16 is 2048 bytes */ -#define CONFIG_SYS_NVRAM_BASE_ADDR 0xF0000500 /* NVRAM base address */ -#define CONFIG_SYS_NVRAM_SIZE 242 /* NVRAM size */ +/* environment starts at the beginning of the EEPROM */ +#define CONFIG_ENV_OFFSET 0x000 +#define CONFIG_ENV_SIZE 0x800 /* 2048 bytes may be used for env vars */ -/*----------------------------------------------------------------------- +#define CONFIG_SYS_NVRAM_BASE_ADDR 0xF0000500 /* NVRAM base address */ +#define CONFIG_SYS_NVRAM_SIZE 242 /* NVRAM size */ + +/* * I2C EEPROM (CAT24WC16) for environment */ #define CONFIG_HARD_I2C /* I2c with hardware support */ -#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ +#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SLAVE 0x7F -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ -/* mask of address bits that overflow into the "EEPROM chip address" */ +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT24W16 */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ +/* mask of address bits that overflow into the "EEPROM chip address" */ #define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24W16 has */ /* 16 byte page write mode using*/ - /* last 4 bits of the address */ -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ + /* last 4 bits of the address */ -/*----------------------------------------------------------------------- +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ + +/* * External Bus Controller (EBC) Setup */ -#define FLASH0_BA 0xFF000000 /* FLASH 0 Base Address */ -#define FLASH1_BA 0xFE000000 /* FLASH 1 Base Address */ -#define CAN_BA 0xF0000000 /* CAN Base Address */ -#define RTC_BA 0xF0000500 /* RTC Base Address */ -#define NVRAM_BA 0xF0200000 /* NVRAM Base Address */ +#define FLASH0_BA 0xFF000000 /* FLASH 0 Base Address */ +#define FLASH1_BA 0xFE000000 /* FLASH 1 Base Address */ +#define CAN_BA 0xF0000000 /* CAN Base Addres */ +#define RTC_BA 0xF0000500 /* RTC Base Address */ +#define NVRAM_BA 0xF0200000 /* NVRAM Base Address */ -/* Memory Bank 0 (Flash Bank 0) initialization */ +/* Memory Bank 0 (Flash Bank 0) initialization */ #define CONFIG_SYS_EBC_PB0AP 0x92015480 -#define CONFIG_SYS_EBC_PB0CR FLASH0_BA | 0x9A000 /* BAS=0xFF0,BS=16MB,BU=R/W,BW=16bit*/ +/* BAS=0xFF0,BS=16MB,BU=R/W,BW=16bit */ +#define CONFIG_SYS_EBC_PB0CR (FLASH0_BA | 0x9A000) -/* Memory Bank 1 (Flash Bank 1) initialization */ +/* Memory Bank 1 (Flash Bank 1) initialization */ #define CONFIG_SYS_EBC_PB1AP 0x92015480 -#define CONFIG_SYS_EBC_PB1CR FLASH1_BA | 0x9A000 /* BAS=0xFE0,BS=16MB,BU=R/W,BW=16bit*/ +/* BAS=0xFE0,BS=16MB,BU=R/W,BW=16bit*/ +#define CONFIG_SYS_EBC_PB1CR (FLASH1_BA | 0x9A000) -/* Memory Bank 2 (CAN0, 1, RTC) initialization */ -#define CONFIG_SYS_EBC_PB2AP 0x03000440 /* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0 */ -#define CONFIG_SYS_EBC_PB2CR CAN_BA | 0x18000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */ +/* Memory Bank 2 (CAN0, 1, RTC) initialization */ +/* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0 */ +#define CONFIG_SYS_EBC_PB2AP 0x03000440 +/* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */ +#define CONFIG_SYS_EBC_PB2CR (CAN_BA | 0x18000) /* Memory Bank 3 -> unused */ -/* Memory Bank 4 (NVRAM) initialization */ -#define CONFIG_SYS_EBC_PB4AP 0x03000440 /* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0 */ -#define CONFIG_SYS_EBC_PB4CR NVRAM_BA | 0x18000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */ +/* Memory Bank 4 (NVRAM) initialization */ +/* TWT=5,TH=2,CSN=0,OEN=0,WBN=0,WBF=0 */ +#define CONFIG_SYS_EBC_PB4AP 0x03000440 +/* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */ +#define CONFIG_SYS_EBC_PB4CR (NVRAM_BA | 0x18000) -/*----------------------------------------------------------------------- +/* * FPGA stuff */ -#define CONFIG_SYS_FPGA_XC95XL 1 /* using Xilinx XC95XL CPLD */ -#define CONFIG_SYS_FPGA_MAX_SIZE 32*1024 /* 32kByte is enough for CPLD */ +#define CONFIG_SYS_FPGA_XC95XL 1 /* using Xilinx XC95XL CPLD */ +#define CONFIG_SYS_FPGA_MAX_SIZE (32 * 1024) /* 32kByte for CPLD */ /* FPGA program pin configuration */ -#define CONFIG_SYS_FPGA_PRG 0x04000000 /* JTAG TMS pin (ppc output) */ -#define CONFIG_SYS_FPGA_CLK 0x02000000 /* JTAG TCK pin (ppc output) */ -#define CONFIG_SYS_FPGA_DATA 0x01000000 /* JTAG TDO->TDI data pin (ppc output) */ -#define CONFIG_SYS_FPGA_INIT 0x00010000 /* unused (ppc input) */ -#define CONFIG_SYS_FPGA_DONE 0x00008000 /* JTAG TDI->TDO pin (ppc input) */ +#define CONFIG_SYS_FPGA_PRG 0x04000000 /* JTAG TMS pin (output) */ +#define CONFIG_SYS_FPGA_CLK 0x02000000 /* JTAG TCK pin (output) */ +#define CONFIG_SYS_FPGA_DATA 0x01000000 /* JTAG TDO pin (output) */ +#define CONFIG_SYS_FPGA_INIT 0x00010000 /* unused (ppc input) */ +#define CONFIG_SYS_FPGA_DONE 0x00008000 /* JTAG TDI pin (input) */ -#define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */ +/* pass Ethernet MAC to VxWorks */ +#define CONFIG_SYS_VXWORKS_MAC_PTR 0x00000000 -/*----------------------------------------------------------------------- +/* * GPIOs */ -#define CONFIG_SYS_NONMONARCH (0x80000000 >> 14) /* GPIO24 */ -#define CONFIG_SYS_XEREADY (0x80000000 >> 15) /* GPIO15 */ -#define CONFIG_SYS_INTA_FAKE (0x80000000 >> 19) /* GPIO19 */ -#define CONFIG_SYS_SELF_RST (0x80000000 >> 21) /* GPIO21 */ -#define CONFIG_SYS_REV1_2 (0x80000000 >> 23) /* GPIO23 */ +#define CONFIG_SYS_VPEN (0x80000000 >> 3) /* GPIO3 */ +#define CONFIG_SYS_NONMONARCH (0x80000000 >> 14) /* GPIO14 */ +#define CONFIG_SYS_XEREADY (0x80000000 >> 15) /* GPIO15 */ +#define CONFIG_SYS_INTA_FAKE (0x80000000 >> 19) /* GPIO19 */ +#define CONFIG_SYS_SELF_RST (0x80000000 >> 21) /* GPIO21 */ +#define CONFIG_SYS_REV1_2 (0x80000000 >> 23) /* GPIO23 */ -/*----------------------------------------------------------------------- +/* * Definitions for initial stack pointer and data area (in data cache) */ -/* use on chip memory ( OCM ) for temperary stack until sdram is tested */ +/* use on chip memory (OCM) for temperary stack until sdram is tested */ #define CONFIG_SYS_TEMP_STACK_OCM 1 /* On Chip Memory location */ #define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000 #define CONFIG_SYS_OCM_DATA_SIZE 0x1000 -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM */ -#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area in RAM */ -#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +/* inside of SDRAM */ +#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR + +/* End of used area in RAM */ +#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE + +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ + CONFIG_SYS_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* @@ -341,7 +333,10 @@ * * Boot Flags */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP -#endif /* __CONFIG_H */ +#endif /* __CONFIG_H */ diff --git a/include/configs/PN62.h b/include/configs/PN62.h index 2c0774fea0..06c11e69ba 100644 --- a/include/configs/PN62.h +++ b/include/configs/PN62.h @@ -61,7 +61,7 @@ #undef CONFIG_CMD_AUTOSCRIPT #undef CONFIG_CMD_LOADS -#undef CONFIG_CMD_ENV +#undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_FLASH #undef CONFIG_CMD_IMLS diff --git a/include/configs/QS823.h b/include/configs/QS823.h index 4ac31b1c0a..c1416cb91b 100644 --- a/include/configs/QS823.h +++ b/include/configs/QS823.h @@ -211,7 +211,7 @@ #define CONFIG_CMD_BOOTD #define CONFIG_CMD_CONSOLE #define CONFIG_CMD_DATE -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_FLASH #define CONFIG_CMD_IMI #define CONFIG_CMD_IMMAP diff --git a/include/configs/QS850.h b/include/configs/QS850.h index 65f41e6a70..de74fee768 100644 --- a/include/configs/QS850.h +++ b/include/configs/QS850.h @@ -211,7 +211,7 @@ #define CONFIG_CMD_BOOTD #define CONFIG_CMD_CONSOLE #define CONFIG_CMD_DATE -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_FLASH #define CONFIG_CMD_IMI #define CONFIG_CMD_IMMAP diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h index 34196319c5..7239f8409d 100644 --- a/include/configs/SBC8540.h +++ b/include/configs/SBC8540.h @@ -382,7 +382,7 @@ #endif #if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_LOADS #endif diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h index a616236b77..b939cfa79f 100644 --- a/include/configs/SIMPC8313.h +++ b/include/configs/SIMPC8313.h @@ -205,6 +205,9 @@ #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 +#ifdef CONFIG_NAND_SPL +#define CONFIG_NS16550_MIN_FUNCTIONS +#endif #define CONFIG_SYS_BAUDRATE_TABLE \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} @@ -332,7 +335,7 @@ #define CONFIG_CMD_JFFS2 #if defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_NAND_U_BOOT) - #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_LOADS #endif diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h index d4154d2050..4181a400e8 100644 --- a/include/configs/SPD823TS.h +++ b/include/configs/SPD823TS.h @@ -67,7 +67,7 @@ #define CONFIG_CMD_IDE -#undef CONFIG_CMD_ENV +#undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_FLASH diff --git a/include/configs/TQM8260.h b/include/configs/TQM8260.h index ac9c94e689..582e670253 100644 --- a/include/configs/TQM8260.h +++ b/include/configs/TQM8260.h @@ -81,8 +81,8 @@ "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ "rootpath=/opt/eldk/ppc_6xx\0" \ "bootfile=tqm8260/uImage\0" \ - "kernel_addr=40080000\0" \ - "ramdisk_addr=40200000\0" \ + "kernel_addr=400C0000\0" \ + "ramdisk_addr=40240000\0" \ "" #define CONFIG_BOOTCOMMAND "run flash_self" diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 796030d060..e126dc38cb 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -340,7 +340,7 @@ extern int tqm834x_num_flash_banks; #endif #if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_LOADS #endif diff --git a/include/configs/VoVPN-GW.h b/include/configs/VoVPN-GW.h index 982f8d8010..5f9a17f3df 100644 --- a/include/configs/VoVPN-GW.h +++ b/include/configs/VoVPN-GW.h @@ -154,7 +154,7 @@ #define CONFIG_CMD_BDI #define CONFIG_CMD_CONSOLE #define CONFIG_CMD_ECHO -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_FLASH #define CONFIG_CMD_IMI #define CONFIG_CMD_IMLS diff --git a/include/configs/XPEDITE5200.h b/include/configs/XPEDITE5200.h index 1df6855cca..370aae1c4c 100644 --- a/include/configs/XPEDITE5200.h +++ b/include/configs/XPEDITE5200.h @@ -330,7 +330,7 @@ #define CONFIG_CMD_DHCP #define CONFIG_CMD_EEPROM #define CONFIG_CMD_ELF -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_FLASH #define CONFIG_CMD_I2C #define CONFIG_CMD_JFFS2 diff --git a/include/configs/XPEDITE5370.h b/include/configs/XPEDITE5370.h index 3bc0fe8f67..a353a14e7d 100644 --- a/include/configs/XPEDITE5370.h +++ b/include/configs/XPEDITE5370.h @@ -375,7 +375,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_CMD_DTT #define CONFIG_CMD_EEPROM #define CONFIG_CMD_ELF -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_FLASH #define CONFIG_CMD_I2C #define CONFIG_CMD_JFFS2 diff --git a/include/configs/ap325rxa.h b/include/configs/ap325rxa.h index 9134ad1dc4..c6d77e3ae6 100644 --- a/include/configs/ap325rxa.h +++ b/include/configs/ap325rxa.h @@ -40,7 +40,7 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_NFS #define CONFIG_CMD_SDRAM -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_IDE #define CONFIG_CMD_EXT2 #define CONFIG_DOS_PARTITION diff --git a/include/configs/cm4008.h b/include/configs/cm4008.h index cfe6de79f4..ce36a24261 100644 --- a/include/configs/cm4008.h +++ b/include/configs/cm4008.h @@ -73,7 +73,7 @@ */ #include <config_cmd_default.h> -#undef CONFIG_CMD_ENV +#undef CONFIG_CMD_SAVEENV #define CONFIG_BOOTDELAY 0 diff --git a/include/configs/cm41xx.h b/include/configs/cm41xx.h index 5454c2e5bd..02cb1efd0f 100644 --- a/include/configs/cm41xx.h +++ b/include/configs/cm41xx.h @@ -73,7 +73,7 @@ */ #include <config_cmd_default.h> -#undef CONFIG_CMD_ENV +#undef CONFIG_CMD_SAVEENV #define CONFIG_BOOTDELAY 0 diff --git a/include/configs/cmi_mpc5xx.h b/include/configs/cmi_mpc5xx.h index fa70a09f6a..c3c603b42d 100644 --- a/include/configs/cmi_mpc5xx.h +++ b/include/configs/cmi_mpc5xx.h @@ -69,7 +69,7 @@ #define CONFIG_CMD_ASKENV #define CONFIG_CMD_BDI #define CONFIG_CMD_CONSOLE -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_RUN #define CONFIG_CMD_IMI diff --git a/include/configs/csb226.h b/include/configs/csb226.h index a24e34a508..15635288e3 100644 --- a/include/configs/csb226.h +++ b/include/configs/csb226.h @@ -78,7 +78,7 @@ #define CONFIG_CMD_FLASH #define CONFIG_CMD_MEMORY #define CONFIG_CMD_NET -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_RUN #define CONFIG_CMD_ASKENV #define CONFIG_CMD_ECHO diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h index a578038b54..b439c80d4f 100644 --- a/include/configs/dbau1x00.h +++ b/include/configs/dbau1x00.h @@ -97,7 +97,7 @@ #undef CONFIG_CMD_BDI #undef CONFIG_CMD_BEDBUG #undef CONFIG_CMD_ELF -#undef CONFIG_CMD_ENV +#undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_FAT #undef CONFIG_CMD_FPGA #undef CONFIG_CMD_MII diff --git a/include/configs/delta.h b/include/configs/delta.h index abb2676bcc..8cbeb9a5e2 100644 --- a/include/configs/delta.h +++ b/include/configs/delta.h @@ -108,7 +108,7 @@ #else -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_NAND #define CONFIG_CMD_I2C diff --git a/include/configs/eNET.h b/include/configs/eNET.h index 8f9e972453..447c7bc87a 100644 --- a/include/configs/eNET.h +++ b/include/configs/eNET.h @@ -75,7 +75,7 @@ #define CONFIG_CMD_BOOTD /* bootd */ #define CONFIG_CMD_CONSOLE /* coninfo */ #define CONFIG_CMD_ECHO /* echo arguments */ -#define CONFIG_CMD_ENV /* saveenv */ +#define CONFIG_CMD_SAVEENV /* saveenv */ #define CONFIG_CMD_FLASH /* flinfo, erase, protect */ #define CONFIG_CMD_FPGA /* FPGA configuration Support */ #define CONFIG_CMD_IMI /* iminfo */ diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h index fc3174c63f..85bf236c64 100644 --- a/include/configs/eXalion.h +++ b/include/configs/eXalion.h @@ -77,7 +77,7 @@ #define CONFIG_CMD_I2C #define CONFIG_CMD_IDE #define CONFIG_CMD_FAT -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_PCI diff --git a/include/configs/gth2.h b/include/configs/gth2.h index aeede04665..b1b4842e08 100644 --- a/include/configs/gth2.h +++ b/include/configs/gth2.h @@ -90,7 +90,7 @@ #define CONFIG_CMD_IDE #define CONFIG_CMD_DHCP -#undef CONFIG_CMD_ENV +#undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_FAT #undef CONFIG_CMD_FLASH #undef CONFIG_CMD_FPGA diff --git a/include/configs/innokom.h b/include/configs/innokom.h index 1b05b8058a..45e22bfc49 100644 --- a/include/configs/innokom.h +++ b/include/configs/innokom.h @@ -73,7 +73,7 @@ #define CONFIG_CMD_CACHE #define CONFIG_CMD_DHCP #define CONFIG_CMD_ECHO -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_FLASH #define CONFIG_CMD_I2C #define CONFIG_CMD_IMI diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h index 1a70af620c..5b4747a575 100644 --- a/include/configs/integratorcp.h +++ b/include/configs/integratorcp.h @@ -85,7 +85,7 @@ */ #define CONFIG_CMD_BDI #define CONFIG_CMD_DHCP -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_FLASH #define CONFIG_CMD_IMI #define CONFIG_CMD_MEMORY diff --git a/include/configs/kmeter1.h b/include/configs/kmeter1.h index 25b1c172e6..b86c61d5ff 100644 --- a/include/configs/kmeter1.h +++ b/include/configs/kmeter1.h @@ -305,7 +305,7 @@ #endif #if defined(CFG_RAMBOOT) -#undef CONFIG_CMD_ENV +#undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_LOADS #endif diff --git a/include/configs/logodl.h b/include/configs/logodl.h index bb6f943aeb..8644cb08a6 100644 --- a/include/configs/logodl.h +++ b/include/configs/logodl.h @@ -69,7 +69,7 @@ */ #define CONFIG_CMD_ASKENV #define CONFIG_CMD_ECHO -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_FLASH #define CONFIG_CMD_MEMORY #define CONFIG_CMD_RUN diff --git a/include/configs/m501sk.h b/include/configs/m501sk.h index eab37df22d..a432850519 100644 --- a/include/configs/m501sk.h +++ b/include/configs/m501sk.h @@ -154,7 +154,7 @@ #define CONFIG_CMD_IMI #define CONFIG_CMD_NFS #define CONFIG_CMD_FLASH -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_SYS_HUSH_PARSER #define CONFIG_AUTO_COMPLETE diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 4c6cc9fef0..ac18c8776d 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -248,7 +248,7 @@ #define CONFIG_CMD_JFFS2 #if !defined(RAMENV) - #define CONFIG_CMD_ENV + #define CONFIG_CMD_SAVEENV #define CONFIG_CMD_SAVES #endif #else diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h index 483bc5305c..a1783b2009 100644 --- a/include/configs/mpc7448hpc2.h +++ b/include/configs/mpc7448hpc2.h @@ -163,7 +163,7 @@ #define CONFIG_CMD_SDRAM #define CONFIG_CMD_EEPROM #define CONFIG_CMD_FLASH -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_BSP #define CONFIG_CMD_DHCP #define CONFIG_CMD_PING diff --git a/include/configs/mpr2.h b/include/configs/mpr2.h index 6ebb1e17b5..86f6a934f9 100644 --- a/include/configs/mpr2.h +++ b/include/configs/mpr2.h @@ -27,7 +27,7 @@ #define __MPR2_H /* Supported commands */ -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_CACHE #define CONFIG_CMD_MEMORY #define CONFIG_CMD_FLASH diff --git a/include/configs/ms7720se.h b/include/configs/ms7720se.h index 520bac0749..9a88ec7fa4 100644 --- a/include/configs/ms7720se.h +++ b/include/configs/ms7720se.h @@ -31,7 +31,7 @@ #define CONFIG_MS7720SE 1 #define CONFIG_CMD_FLASH -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_SDRAM #define CONFIG_CMD_MEMORY #define CONFIG_CMD_CACHE diff --git a/include/configs/ms7722se.h b/include/configs/ms7722se.h index 52020047d9..53ffbeef24 100644 --- a/include/configs/ms7722se.h +++ b/include/configs/ms7722se.h @@ -38,7 +38,7 @@ #define CONFIG_CMD_DFL #define CONFIG_CMD_SDRAM #define CONFIG_CMD_MEMORY -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTDELAY 3 diff --git a/include/configs/ms7750se.h b/include/configs/ms7750se.h index af9933cad9..5eed3ab66d 100644 --- a/include/configs/ms7750se.h +++ b/include/configs/ms7750se.h @@ -40,7 +40,7 @@ #define CONFIG_CMD_DFL #define CONFIG_CMD_FLASH -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_SCIF_CONSOLE 1 #define CONFIG_BAUDRATE 38400 diff --git a/include/configs/netstar.h b/include/configs/netstar.h index fab22d16a7..2c90265e3b 100644 --- a/include/configs/netstar.h +++ b/include/configs/netstar.h @@ -140,7 +140,7 @@ #define CONFIG_CMD_BDI #define CONFIG_CMD_BOOTD #define CONFIG_CMD_DHCP -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_FLASH #define CONFIG_CMD_IMI #define CONFIG_CMD_JFFS2 diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index 54d2416bd4..f8ae163947 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -103,6 +103,7 @@ #define CONFIG_CMD_I2C /* I2C serial bus support */ #define CONFIG_CMD_MMC /* MMC support */ #define CONFIG_CMD_NAND /* NAND support */ +#define CONFIG_CMD_NAND_LOCK_UNLOCK /* Enable lock/unlock support */ #undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ #undef CONFIG_CMD_FPGA /* FPGA configuration Support */ diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h index 7c7bebac3b..5ad745e646 100644 --- a/include/configs/pb1x00.h +++ b/include/configs/pb1x00.h @@ -198,7 +198,7 @@ #define CONFIG_CMD_MII #define CONFIG_CMD_PING -#undef CONFIG_CMD_ENV +#undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_FAT #undef CONFIG_CMD_FLASH #undef CONFIG_CMD_FPGA diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h index 577ab8ef6f..0fd8635681 100644 --- a/include/configs/ppmc7xx.h +++ b/include/configs/ppmc7xx.h @@ -83,7 +83,7 @@ #include <config_cmd_default.h> #define CONFIG_CMD_FLASH -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_RUN #define CONFIG_CMD_ELF #define CONFIG_CMD_NET diff --git a/include/configs/qong.h b/include/configs/qong.h new file mode 100644 index 0000000000..ccc2625135 --- /dev/null +++ b/include/configs/qong.h @@ -0,0 +1,221 @@ +/* + * Copyright (C) 2009, Ilya Yanok, Emcraft Systems, <yanok@emcraft.com> + * + * Configuration settings for the Dave/DENX QongEVB-LITE board. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/mx31-regs.h> + + /* High Level Configuration Options */ +#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */ +#define CONFIG_MX31 1 /* in a mx31 */ +#define CONFIG_QONG 1 +#define CONFIG_MX31_HCLK_FREQ 26000000 /* 26MHz */ +#define CONFIG_MX31_CLK32 32768 + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +/* + * Hardware drivers + */ + +#define CONFIG_MX31_UART 1 +#define CONFIG_SYS_MX31_UART1 1 + +/* FPGA */ +#define CONFIG_QONG_FPGA 1 +#define CONFIG_FPGA_BASE (CS1_BASE) + +#ifdef CONFIG_QONG_FPGA +/* Ethernet */ +#define CONFIG_DNET 1 +#define CONFIG_DNET_BASE (CS1_BASE + QONG_FPGA_PERIPH_SIZE) +#define CONFIG_NET_MULTI 1 + +/* + * Reducing the ARP timeout from default 5 seconds to 200ms we speed up the + * initial TFTP transfer, should the user wish one, significantly. + */ +#define CONFIG_ARP_TIMEOUT 200UL + +#endif /* CONFIG_QONG_FPGA */ + +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/*********************************************************** + * Command definition + ***********************************************************/ + +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_CMD_JFFS2 + +/* + * You can compile in a MAC address and your custom net settings by using + * the following syntax. + * + * #define CONFIG_ETHADDR xx:xx:xx:xx:xx:xx + * #define CONFIG_SERVERIP <server ip> + * #define CONFIG_IPADDR <board ip> + * #define CONFIG_GATEWAYIP <gateway ip> + * #define CONFIG_NETMASK <your netmask> + */ + +#define CONFIG_BOOTDELAY 5 + +#define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ + +#define xstr(s) str(s) +#define str(s) #s + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs}" \ + " console=ttymxc0,${baudrate}\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "addmisc=setenv bootargs ${bootargs}\0" \ + "uboot_addr=a0000000\0" \ + "kernel_addr=a0080000\0" \ + "ramdisk_addr=a0300000\0" \ + "u-boot=qong/u-boot.bin\0" \ + "kernel_addr_r=80800000\0" \ + "hostname=qong\0" \ + "bootfile=qong/uImage\0" \ + "rootpath=/opt/eldk-4.2-arm/armVFP\0" \ + "flash_self=run ramargs addip addtty addmtd addmisc;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \ + "bootm ${kernel_addr}\0" \ + "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ + "run nfsargs addip addtty addmtd addmisc;" \ + "bootm\0" \ + "bootcmd=run flash_self\0" \ + "load=tftp ${loadaddr} ${u-boot}\0" \ + "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) \ + " +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE) \ + " +${filesize};cp.b ${fileaddr} " \ + xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \ + "upd=run load update\0" \ + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/* memtest works on first 255MB of RAM */ +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 +#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0xff000000) + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_CMDLINE_EDITING 1 + +#define CONFIG_MISC_INIT_R 1 +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 CSD0_BASE +#define PHYS_SDRAM_1_SIZE 0x10000000 /* 256 MB */ + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CONFIG_SYS_FLASH_BASE CS0_BASE +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +/* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 +/* Monitor at beginning of flash */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256KiB */ + +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SECT_SIZE 0x20000 +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x40000) + +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE + +/*----------------------------------------------------------------------- + * CFI FLASH driver setup + */ +/* Flash memory is CFI compliant */ +#define CONFIG_SYS_FLASH_CFI 1 +/* Use drivers/cfi_flash.c */ +#define CONFIG_FLASH_CFI_DRIVER 1 +/* Use buffered writes (~10x faster) */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 +/* Use hardware sector protection */ +#define CONFIG_SYS_FLASH_PROTECTION 1 + +/* + * JFFS2 partitions + */ +#define CONFIG_JFFS2_CMDLINE +#define MTDIDS_DEFAULT "nor0=physmap-flash.0" +#define MTDPARTS_DEFAULT \ + "mtdparts=physmap-flash.0:256k(U-Boot),128k(env1)," \ + "128k(env2),2560k(kernel),13m(ramdisk),-(user)" + +#endif /* __CONFIG_H */ diff --git a/include/configs/r7780mp.h b/include/configs/r7780mp.h index f85d5d6695..72a3b5c8b1 100644 --- a/include/configs/r7780mp.h +++ b/include/configs/r7780mp.h @@ -43,7 +43,7 @@ #define CONFIG_CMD_PCI #define CONFIG_CMD_NET #define CONFIG_CMD_PING -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_NFS #define CONFIG_CMD_IDE #define CONFIG_CMD_EXT2 diff --git a/include/configs/rsk7203.h b/include/configs/rsk7203.h index f88a773403..36e4c017bb 100644 --- a/include/configs/rsk7203.h +++ b/include/configs/rsk7203.h @@ -37,7 +37,7 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_NFS #define CONFIG_CMD_PING -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_SDRAM #define CONFIG_CMD_MEMORY #define CONFIG_CMD_CACHE diff --git a/include/configs/sbc8240.h b/include/configs/sbc8240.h index d19a787e92..1cc2920b37 100644 --- a/include/configs/sbc8240.h +++ b/include/configs/sbc8240.h @@ -96,7 +96,7 @@ #define CONFIG_CMD_BSP #define CONFIG_CMD_DIAG #define CONFIG_CMD_ELF -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_FLASH #define CONFIG_CMD_PCI #define CONFIG_CMD_PING diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h index 0603e3c8a4..f476e3ed5e 100644 --- a/include/configs/sbc8349.h +++ b/include/configs/sbc8349.h @@ -455,7 +455,7 @@ #endif #if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_LOADS #endif diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h index d4e9d7479a..4fa501da5e 100644 --- a/include/configs/sbc8560.h +++ b/include/configs/sbc8560.h @@ -380,7 +380,7 @@ #endif #if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH) - #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_LOADS #endif diff --git a/include/configs/sh7763rdp.h b/include/configs/sh7763rdp.h index 4ea79cf33b..8d7456eb69 100644 --- a/include/configs/sh7763rdp.h +++ b/include/configs/sh7763rdp.h @@ -40,7 +40,7 @@ #define CONFIG_CMD_MEMORY #define CONFIG_CMD_NET #define CONFIG_CMD_PING -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_NFS #define CONFIG_CMD_JFFS2 diff --git a/include/configs/sh7785lcr.h b/include/configs/sh7785lcr.h index ebca448eaf..537ec4ecad 100644 --- a/include/configs/sh7785lcr.h +++ b/include/configs/sh7785lcr.h @@ -40,7 +40,7 @@ #define CONFIG_CMD_DFL #define CONFIG_CMD_SDRAM #define CONFIG_CMD_RUN -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_USB #define CONFIG_USB_STORAGE diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h index c61667fd0c..06d6a88592 100644 --- a/include/configs/smdk6400.h +++ b/include/configs/smdk6400.h @@ -104,7 +104,7 @@ #define CONFIG_CMD_REGINFO #define CONFIG_CMD_LOADS #define CONFIG_CMD_LOADB -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_NAND #if defined(CONFIG_BOOT_ONENAND) #define CONFIG_CMD_ONENAND diff --git a/include/configs/stxgp3.h b/include/configs/stxgp3.h index ae6f45aeec..0424e2978e 100644 --- a/include/configs/stxgp3.h +++ b/include/configs/stxgp3.h @@ -322,7 +322,7 @@ #define CONFIG_CMD_I2C #if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_LOADS #else #define CONFIG_CMD_ELF diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h index c312f1af9d..2783f9e04e 100644 --- a/include/configs/stxssa.h +++ b/include/configs/stxssa.h @@ -363,7 +363,7 @@ #endif #if defined(CONFIG_SYS_RAMBOOT) - #undef CONFIG_CMD_ENV + #undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_LOADS #else #define CONFIG_CMD_ELF diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h index b702de0c58..353e8db427 100644 --- a/include/configs/suzaku.h +++ b/include/configs/suzaku.h @@ -62,7 +62,7 @@ #include <config_cmd_default.h> #undef CONFIG_CMD_BDI -#undef CONFIG_CMD_ENV +#undef CONFIG_CMD_SAVEENV #undef CONFIG_CMD_MEMORY #undef CONFIG_CMD_NET #undef CONFIG_CMD_MISC diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h index 6e9c27c1e1..1a47aadcfc 100644 --- a/include/configs/utx8245.h +++ b/include/configs/utx8245.h @@ -105,7 +105,7 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}" #define CONFIG_CMD_PCI #define CONFIG_CMD_FLASH #define CONFIG_CMD_MEMORY -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_CONSOLE #define CONFIG_CMD_LOADS #define CONFIG_CMD_LOADB diff --git a/include/configs/versatile.h b/include/configs/versatile.h index d812421654..852becb36d 100644 --- a/include/configs/versatile.h +++ b/include/configs/versatile.h @@ -108,7 +108,7 @@ #define CONFIG_CMD_BDI #define CONFIG_CMD_MEMORY #define CONFIG_CMD_FLASH -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV /* diff --git a/include/configs/voiceblue.h b/include/configs/voiceblue.h index 866b72d4cf..f4606102a9 100644 --- a/include/configs/voiceblue.h +++ b/include/configs/voiceblue.h @@ -127,7 +127,7 @@ #define CONFIG_CMD_BDI #define CONFIG_CMD_BOOTD #define CONFIG_CMD_DHCP -#define CONFIG_CMD_ENV +#define CONFIG_CMD_SAVEENV #define CONFIG_CMD_FLASH #define CONFIG_CMD_IMI #define CONFIG_CMD_JFFS2 diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h index f30eca1d24..31ea4ca317 100644 --- a/include/configs/zylonite.h +++ b/include/configs/zylonite.h @@ -94,7 +94,7 @@ #ifdef TURN_ON_ETHERNET #define CONFIG_CMD_PING #else - #define CONFIG_CMD_ENV + #define CONFIG_CMD_SAVEENV #define CONFIG_CMD_NAND #undef CONFIG_CMD_NET |