summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/mx1ads.h163
-rw-r--r--include/configs/mx6sabre_common.h23
-rw-r--r--include/configs/mx6sabresd.h2
-rw-r--r--include/configs/mx6slevk.h1
-rw-r--r--include/configs/wandboard.h20
5 files changed, 36 insertions, 173 deletions
diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h
deleted file mode 100644
index 12667c57c1..0000000000
--- a/include/configs/mx1ads.h
+++ /dev/null
@@ -1,163 +0,0 @@
-/*
- * include/configs/mx1ads.h
- *
- * (c) Copyright 2004
- * Techware Information Technology, Inc.
- * http://www.techware.com.tw/
- *
- * Ming-Len Wu <minglen_wu@techware.com.tw>
- *
- * This is the Configuration setting for Motorola MX1ADS board
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
-#define CONFIG_IMX 1 /* It's a Motorola MC9328 SoC */
-#define CONFIG_MX1ADS 1 /* on a Motorola MX1ADS Board */
-
-/*
- * Select serial console configuration
- */
-#define CONFIG_IMX_SERIAL
-#define CONFIG_IMX_SERIAL1 /* internal uart 1 */
-/* #define _CONFIG_UART2 */ /* internal uart 2 */
-/* #define CONFIG_SILENT_CONSOLE */ /* use this to disable output */
-
-#define CONFIG_BOARD_LATE_INIT
-#define USE_920T_MMU 1
-
-#if 0
-#define CONFIG_SYS_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */
-#define CONFIG_SYS_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */
-#define CONFIG_SYS_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */
-#endif
-
-/*
- * Size of malloc() pool
- */
-
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * CS8900 Ethernet drivers
- */
-#define CONFIG_CS8900 /* we have a CS8900 on-board */
-#define CONFIG_CS8900_BASE 0x15000300
-#define CONFIG_CS8900_BUS16 /* the Linux driver does accesses as shorts */
-
-/*
- * select serial console configuration
- */
-
-/* #define CONFIG_UART1 */
-/* #define CONFIG_UART2 1 */
-
-#define CONFIG_BAUDRATE 115200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_ELF
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "root=/dev/msdk mem=48M"
-#define CONFIG_BOOTFILE "mx1ads"
-#define CONFIG_BOOTCOMMAND "tftp; bootm"
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-
-#define CONFIG_SYS_HUSH_PARSER 1
-
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT "MX1ADS$ " /* Monitor Command Prompt */
-#else
-#define CONFIG_SYS_PROMPT "MX1ADS=> " /* Monitor Command Prompt */
-#endif
-
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
- /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0x09000000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0x0AF00000 /* 63 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0x08800000 /* default load address */
-#define CONFIG_SYS_HZ 3686400
-#define CONFIG_SYS_CPUSPEED 0x141
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */
-#define PHYS_SDRAM_1 0x08000000 /* SDRAM on CSD0 */
-#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-
-#define CONFIG_SYS_TEXT_BASE 0x10000000
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_RAM_ADDR 0x00300000
-#define CONFIG_SYS_INIT_RAM_SIZE 0x000FFFFF
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
- GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
- CONFIG_SYS_GBL_DATA_OFFSET)
-
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* 1 bank of SyncFlash */
-#define CONFIG_SYS_FLASH_BASE 0x0C000000 /* SyncFlash on CSD1 */
-#define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-#define CONFIG_SYNCFLASH 1
-#define PHYS_FLASH_SIZE 0x01000000
-#define CONFIG_SYS_MAX_FLASH_SECT (16)
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+0x00ff8000)
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_SIZE 0x04000 /* Total Size of Environment Sector */
-#define CONFIG_ENV_SECT_SIZE 0x100000
-
-/*-----------------------------------------------------------------------
- * Enable passing ATAGS
- */
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-
-#define CONFIG_SYS_CLK_FREQ 16780000
-#define CONFIG_SYSPLL_CLK_FREQ 16000000
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index 21c848f90b..5ee7fa5448 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -95,6 +95,28 @@
#define CONFIG_LOADADDR 0x12000000
#define CONFIG_SYS_TEXT_BASE 0x17800000
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+#define EMMC_ENV \
+ "emmcdev=2\0" \
+ "update_emmc_firmware=" \
+ "if test ${ip_dyn} = yes; then " \
+ "setenv get_cmd dhcp; " \
+ "else " \
+ "setenv get_cmd tftp; " \
+ "fi; " \
+ "if ${get_cmd} ${update_sd_firmware_filename}; then " \
+ "if mmc dev ${emmcdev} && " \
+ "mmc open ${emmcdev} 1; then " \
+ "setexpr fw_sz ${filesize} / 0x200; " \
+ "setexpr fw_sz ${fw_sz} + 1; " \
+ "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
+ "mmc close ${emmcdev} 1; " \
+ "fi; " \
+ "fi\0"
+#else
+#define EMMC_ENV ""
+#endif
+
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"uimage=uImage\0" \
@@ -121,6 +143,7 @@
"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
"fi; " \
"fi\0" \
+ EMMC_ENV \
"mmcargs=setenv bootargs console=${console},${baudrate} " \
"root=${mmcroot}\0" \
"loadbootscript=" \
diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index 3229bc70d8..4919f53328 100644
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -23,6 +23,8 @@
#endif
#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
+#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
+
#include "mx6sabre_common.h"
#define CONFIG_SYS_FSL_USDHC_NUM 3
diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h
index 7abad08c47..b29f78cc2c 100644
--- a/include/configs/mx6slevk.h
+++ b/include/configs/mx6slevk.h
@@ -11,6 +11,7 @@
#include <asm/arch/imx-regs.h>
#include <asm/sizes.h>
+#include "mx6_common.h"
#define CONFIG_MX6
#define CONFIG_DISPLAY_CPUINFO
diff --git a/include/configs/wandboard.h b/include/configs/wandboard.h
index ae8480dd24..348847238e 100644
--- a/include/configs/wandboard.h
+++ b/include/configs/wandboard.h
@@ -108,7 +108,7 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
- "uimage=uImage\0" \
+ "image=zImage\0" \
"console=ttymxc0\0" \
"splashpos=m,m\0" \
"fdt_high=0xffffffff\0" \
@@ -140,22 +140,22 @@
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
"bootscript=echo Running bootscript from mmc ...; " \
"source\0" \
- "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+ "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
"mmcboot=echo Booting from mmc ...; " \
"run mmcargs; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if run loadfdt; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
- "bootm; " \
+ "bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
- "bootm; " \
+ "bootz; " \
"fi;\0" \
"netargs=setenv bootargs console=${console},${baudrate} " \
"root=/dev/nfs " \
@@ -167,19 +167,19 @@
"else " \
"setenv get_cmd tftp; " \
"fi; " \
- "${get_cmd} ${uimage}; " \
+ "${get_cmd} ${image}; " \
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
- "bootm ${loadaddr} - ${fdt_addr}; " \
+ "bootz ${loadaddr} - ${fdt_addr}; " \
"else " \
"if test ${boot_fdt} = try; then " \
- "bootm; " \
+ "bootz; " \
"else " \
"echo WARN: Cannot load the DT; " \
"fi; " \
"fi; " \
"else " \
- "bootm; " \
+ "bootz; " \
"fi;\0"
#define CONFIG_BOOTCOMMAND \
@@ -187,7 +187,7 @@
"if run loadbootscript; then " \
"run bootscript; " \
"else " \
- "if run loaduimage; then " \
+ "if run loadimage; then " \
"run mmcboot; " \
"else run netboot; " \
"fi; " \
generated by cgit (git 2.34.1) at 2024-12-27 04:23:14 +0000