summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/ge_bx50v3.h49
-rw-r--r--include/configs/mx53ppd.h76
-rw-r--r--include/configs/mx6sabre_common.h8
-rw-r--r--include/configs/mx6sabreauto.h8
-rw-r--r--include/configs/mx6sabresd.h9
-rw-r--r--include/configs/mx6ul_14x14_evk.h5
-rw-r--r--include/configs/mx7ulp_com.h4
-rw-r--r--include/configs/novena.h9
-rw-r--r--include/configs/verdin-imx8mm.h128
-rw-r--r--include/configs/warp7.h4
10 files changed, 166 insertions, 134 deletions
diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
index dad906d494..3bf0cd518c 100644
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@@ -16,9 +16,6 @@
#define CONFIG_BOARD_NAME "General Electric Bx50v3"
-#define CONFIG_MXC_UART_BASE UART3_BASE
-#define CONSOLE_DEV "ttymxc2"
-
#include "mx6_common.h"
#include <linux/sizes.h>
@@ -28,8 +25,6 @@
#define CONFIG_REVISION_TAG
#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
-#define CONFIG_MXC_UART
-
/* SATA Configs */
#ifdef CONFIG_CMD_SATA
#define CONFIG_SYS_SATA_MAX_DEVICE 1
@@ -64,7 +59,7 @@
"setenv netmask 255.255.255.0; setenv ethaddr ca:fe:de:ca:f0:11; " \
"setenv bootargs root=/dev/nfs nfsroot=${nfsserver}:/srv/nfs/,v3,tcp rw rootwait" \
"setenv bootargs $bootargs ip=${ipaddr}:${nfsserver}:${gatewayip}:${netmask}::eth0:off " \
- "setenv bootargs $bootargs cma=128M bootcause=POR console=${console} ${videoargs} " \
+ "setenv bootargs $bootargs cma=128M bootcause=POR ${videoargs} " \
"setenv bootargs $bootargs systemd.mask=helix-network-defaults.service " \
"setenv bootargs $bootargs watchdog.handle_boot_enabled=1\0" \
"networkboot=" \
@@ -84,34 +79,29 @@
NETWORKBOOT \
"bootcause=POR\0" \
"image=/boot/fitImage\0" \
- "fdt_high=0xffffffff\0" \
"dev=mmc\0" \
"devnum=2\0" \
"rootdev=mmcblk0p\0" \
"quiet=quiet loglevel=0\0" \
- "console=" CONSOLE_DEV "\0" \
"setargs=setenv bootargs root=/dev/${rootdev}${partnum} " \
"ro rootwait cma=128M " \
"bootcause=${bootcause} " \
- "${quiet} console=${console} " \
+ "${quiet} " \
"${videoargs}" "\0" \
"doquiet=" \
"if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \
"then setenv quiet; fi\0" \
"hasfirstboot=" \
- "ext2load ${dev} ${devnum}:${partnum} 0x7000A000 " \
- "/boot/bootcause/firstboot\0" \
+ "test -e ${dev} ${devnum}:${partnum} /boot/bootcause/firstboot\0" \
"swappartitions=" \
"setexpr partnum 3 - ${partnum}\0" \
"failbootcmd=" \
"echo reached failbootcmd; " \
- "bx50_backlight_enable; " \
+ "cls; " \
"setcurs 5 4; " \
"lcdputs \"Monitor failed to start. " \
"Try again, or contact GE Service for support.\"; " \
- "mw.b 0x7000A000 0xbc; " \
- "mw.b 0x7000A001 0x00; " \
- "ext4write ${dev} ${devnum}:5 0x7000A000 /boot/failures 2\0" \
+ "bootcount reset; \0" \
"altbootcmd=" \
"run doquiet; " \
"setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
@@ -163,6 +153,8 @@
/* Physical Memory Map */
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
+#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */
+
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
@@ -189,33 +181,6 @@
#define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(7, 12)
#define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(1, 5)
-#define CONFIG_RTC_RX8010SJ
-#define CONFIG_SYS_RTC_BUS_NUM 2
-#define CONFIG_SYS_I2C_RTC_ADDR 0x32
-
-/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_SPEED 100000
-#define CONFIG_SYS_I2C_MXC_I2C1
-#define CONFIG_SYS_I2C_MXC_I2C2
-#define CONFIG_SYS_I2C_MXC_I2C3
-
-#define CONFIG_SYS_NUM_I2C_BUSES 11
-#define CONFIG_SYS_I2C_MAX_HOPS 1
-#define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \
- {1, {I2C_NULL_HOP} }, \
- {2, {I2C_NULL_HOP} }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 0} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 6} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 7} } }, \
- }
-
#define CONFIG_BCH
#endif /* __GE_BX50V3_CONFIG_H */
diff --git a/include/configs/mx53ppd.h b/include/configs/mx53ppd.h
index 9361507a55..196eab05c2 100644
--- a/include/configs/mx53ppd.h
+++ b/include/configs/mx53ppd.h
@@ -11,8 +11,6 @@
#include <asm/arch/imx-regs.h>
-#define CONSOLE_DEV "ttymxc0"
-
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
@@ -25,15 +23,6 @@
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_REVISION_TAG
-#define CONFIG_MXC_UART
-#define CONFIG_MXC_UART_BASE UART1_BASE
-
-/* Eth Configs */
-
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE FEC_BASE_ADDR
-#define CONFIG_FEC_MXC_PHYADDR 0x1F
-
/* USB Configs */
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
@@ -43,33 +32,12 @@
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
-#define CONFIG_SYS_RTC_BUS_NUM 2
-#define CONFIG_SYS_I2C_RTC_ADDR 0x30
-
-/* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
-
-/* PMIC Controller */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
-#define CONFIG_DIALOG_POWER
-#define CONFIG_POWER_FSL
-#define CONFIG_POWER_FSL_MC13892
-#define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48
-#define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8
-
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE 115200
/* Command definition */
-#define CONFIG_ETHPRIME "FEC0"
-
#define CONFIG_LOADADDR 0x72000000 /* loadaddr env var */
#define PPD_CONFIG_NFS \
@@ -92,34 +60,26 @@
#define CONFIG_EXTRA_ENV_SETTINGS \
PPD_CONFIG_NFS \
"image=/boot/fitImage\0" \
- "fdt_high=0xffffffff\0" \
"dev=mmc\0" \
"devnum=2\0" \
"rootdev=mmcblk0p\0" \
"quiet=quiet loglevel=0\0" \
- "console=" CONSOLE_DEV "\0" \
"lvds=ldb\0" \
"setargs=setenv bootargs ${lvds} jtag=on mem=2G " \
- "vt.global_cursor_default=0 bootcause=${bootcause} ${quiet} " \
- "console=${console}\0" \
+ "vt.global_cursor_default=0 bootcause=${bootcause} ${quiet}\0" \
"bootargs_emmc=setenv bootargs root=/dev/${rootdev}${partnum} ro " \
"rootwait ${bootargs}\0" \
"doquiet=if ext2load ${dev} ${devnum}:5 0x7000A000 /boot/console; " \
"then setenv quiet; fi\0" \
- "hasfirstboot=ext2load ${dev} ${devnum}:${partnum} 0x7000A000 " \
- "/boot/bootcause/firstboot\0" \
+ "hasfirstboot=" \
+ "test -e ${dev} ${devnum}:${partnum} /boot/bootcause/firstboot\0" \
"swappartitions=setexpr partnum 3 - ${partnum}\0" \
"failbootcmd=" \
- "ppd_lcd_enable; " \
- "msg=\"Monitor failed to start. " \
- "Try again, or contact GE Service for support.\"; " \
- "echo $msg; " \
- "setenv stdout vga; " \
- "echo \"\n\n\n\n \" $msg; " \
- "setenv stdout serial; " \
- "mw.b 0x7000A000 0xbc; " \
- "mw.b 0x7000A001 0x00; " \
- "ext4write ${dev} ${devnum}:5 0x7000A000 /boot/failures 2\0" \
+ "cls; " \
+ "setcurs 5 4; " \
+ "lcdputs \"Monitor failed to start. " \
+ "Try again, or contact GE Service for support.\"; " \
+ "bootcount reset; \0" \
"altbootcmd=" \
"run doquiet; " \
"setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
@@ -166,6 +126,8 @@
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* 256M */
+
/* Physical Memory Map */
#define PHYS_SDRAM_1 CSD0_BASE_ADDR
#define PHYS_SDRAM_1_SIZE (gd->bd->bi_dram[0].size)
@@ -188,25 +150,11 @@
#define CONFIG_CMD_FUSE
#define CONFIG_FSL_IIM
-#define CONFIG_SYS_I2C_SPEED 100000
-
-/* I2C1 */
-#define CONFIG_SYS_NUM_I2C_BUSES 9
-#define CONFIG_SYS_I2C_MAX_HOPS 1
-#define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 0} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 6} } }, \
- {0, {{I2C_MUX_PCA9547, 0x70, 7} } }, \
- }
-
#define CONFIG_BCH
/* Backlight Control */
#define CONFIG_IMX6_PWM_PER_CLK 66666000
+#define CONFIG_IMX_VIDEO_SKIP
+
#endif /* __CONFIG_H */
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index 9309e0320f..ee3b754910 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -20,14 +20,6 @@
/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE RGMII
-#define CONFIG_ETHPRIME "FEC"
-#define CONFIG_FEC_MXC_PHYADDR 1
-
-#define CONFIG_PHY_ATHEROS
-
#ifdef CONFIG_SUPPORT_EMMC_BOOT
#define EMMC_ENV \
"emmcdev=2\0" \
diff --git a/include/configs/mx6sabreauto.h b/include/configs/mx6sabreauto.h
index e444930dc8..c07b03984a 100644
--- a/include/configs/mx6sabreauto.h
+++ b/include/configs/mx6sabreauto.h
@@ -75,4 +75,12 @@
#define CONFIG_POWER_PFUZE100
#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
+#define CONFIG_FEC_MXC
+#define IMX_FEC_BASE ENET_BASE_ADDR
+#define CONFIG_FEC_XCV_TYPE RGMII
+#define CONFIG_ETHPRIME "FEC"
+#define CONFIG_FEC_MXC_PHYADDR 1
+
+#define CONFIG_PHY_ATHEROS
+
#endif /* __MX6SABREAUTO_CONFIG_H */
diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index ec1537541a..d810202117 100644
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -62,4 +62,13 @@
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Enabled USB controller number */
#endif
+#define CONFIG_FEC_MXC
+#define IMX_FEC_BASE ENET_BASE_ADDR
+#define CONFIG_FEC_XCV_TYPE RGMII
+#define CONFIG_ETHPRIME "FEC"
+#define CONFIG_FEC_MXC_PHYADDR 1
+
+#define CONFIG_PHY_ATHEROS
+
+
#endif /* __MX6SABRESD_CONFIG_H */
diff --git a/include/configs/mx6ul_14x14_evk.h b/include/configs/mx6ul_14x14_evk.h
index 5cc15b6d2f..f347eeb39f 100644
--- a/include/configs/mx6ul_14x14_evk.h
+++ b/include/configs/mx6ul_14x14_evk.h
@@ -44,11 +44,6 @@
#define CONFIG_SYS_I2C_SPEED 100000
#endif
-/* Note: This is incorrect and should move to Kconfig / defconfig */
-#ifdef CONFIG_DM_GPIO
-#define CONFIG_DM_74X164
-#endif
-
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
#define CONFIG_EXTRA_ENV_SETTINGS \
diff --git a/include/configs/mx7ulp_com.h b/include/configs/mx7ulp_com.h
index bccfea812d..f6e173d7d5 100644
--- a/include/configs/mx7ulp_com.h
+++ b/include/configs/mx7ulp_com.h
@@ -14,10 +14,6 @@
#define CONFIG_BOARD_POSTCLK_INIT
#define CONFIG_SYS_BOOTM_LEN 0x1000000
-#define SRC_BASE_ADDR CMC1_RBASE
-#define IRAM_BASE_ADDR OCRAM_0_BASE
-#define IOMUXC_BASE_ADDR IOMUXC1_RBASE
-
/*
* Detect overlap between U-Boot image and environment area in build-time
*
diff --git a/include/configs/novena.h b/include/configs/novena.h
index c03b8db2ba..2b8419563c 100644
--- a/include/configs/novena.h
+++ b/include/configs/novena.h
@@ -53,13 +53,8 @@
#include "imx6_spl.h" /* common IMX6 SPL configuration */
/* Ethernet Configuration */
-#ifdef CONFIG_CMD_NET
-#define CONFIG_FEC_MXC
-#define IMX_FEC_BASE ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE RGMII
-#define CONFIG_ETHPRIME "FEC"
-#define CONFIG_FEC_MXC_PHYADDR 0x7
-#define CONFIG_ARP_TIMEOUT 200UL
+#ifdef CONFIG_SPL_BUILD
+#undef CONFIG_DM_ETH
#endif
/* I2C */
diff --git a/include/configs/verdin-imx8mm.h b/include/configs/verdin-imx8mm.h
new file mode 100644
index 0000000000..dc0a2efec6
--- /dev/null
+++ b/include/configs/verdin-imx8mm.h
@@ -0,0 +1,128 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2020 Toradex
+ */
+
+#ifndef __VERDIN_IMX8MM_H
+#define __VERDIN_IMX8MM_H
+
+#include <asm/arch/imx-regs.h>
+#include <linux/sizes.h>
+
+#ifdef CONFIG_SECURE_BOOT
+#define CONFIG_CSF_SIZE SZ_8K
+#endif
+
+#define CONFIG_SPL_MAX_SIZE (148 * 1024)
+#define CONFIG_SYS_MONITOR_LEN SZ_512K
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300
+#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
+#define CONFIG_SYS_UBOOT_BASE \
+ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
+
+#ifdef CONFIG_SPL_BUILD
+#define CONFIG_SPL_STACK 0x920000
+#define CONFIG_SPL_BSS_START_ADDR 0x910000
+#define CONFIG_SPL_BSS_MAX_SIZE SZ_8K /* 8 KB */
+#define CONFIG_SYS_SPL_MALLOC_START 0x42200000
+#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_512K /* 512 KB */
+
+/* malloc f used before GD_FLG_FULL_MALLOC_INIT set */
+#define CONFIG_MALLOC_F_ADDR 0x930000
+/* For RAW image gives a error info not panic */
+#define CONFIG_SPL_ABORT_ON_RAW_IMAGE
+#endif
+
+#define MEM_LAYOUT_ENV_SETTINGS \
+ "fdt_addr_r=0x44000000\0" \
+ "kernel_addr_r=0x42000000\0" \
+ "ramdisk_addr_r=0x46400000\0" \
+ "scriptaddr=0x46000000\0"
+
+#define CONFIG_LOADADDR 0x40480000
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+/* Enable Distro Boot */
+#ifndef CONFIG_SPL_BUILD
+#define BOOT_TARGET_DEVICES(func) \
+ func(MMC, mmc, 1) \
+ func(MMC, mmc, 0) \
+ func(DHCP, dhcp, na)
+#include <config_distro_bootcmd.h>
+#undef CONFIG_ISO_PARTITION
+#else
+#define BOOTENV
+#endif
+
+/* Initial environment variables */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ BOOTENV \
+ MEM_LAYOUT_ENV_SETTINGS \
+ "bootcmd_mfg=fastboot 0\0" \
+ "console=ttymxc0\0" \
+ "fdt_addr=0x43000000\0" \
+ "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
+ "initrd_addr=0x43800000\0" \
+ "initrd_high=0xffffffffffffffff\0" \
+ "kernel_image=Image\0" \
+ "setup=setenv setupargs console=${console},${baudrate} " \
+ "console=tty1 consoleblank=0 earlycon\0" \
+ "update_uboot=askenv confirm Did you load flash.bin (y/N)?; " \
+ "if test \"$confirm\" = \"y\"; then " \
+ "setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
+ "${blkcnt} / 0x200; mmc dev 0 1; mmc write ${loadaddr} 0x2 " \
+ "${blkcnt}; fi\0"
+
+#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
+#define CONFIG_SYS_INIT_RAM_SIZE SZ_2M
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_ENV_OVERWRITE
+#if defined(CONFIG_ENV_IS_IN_MMC)
+/* Environment in eMMC, before config block at the end of 1st "boot sector" */
+#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 eMMC */
+#define CONFIG_SYS_MMC_ENV_PART 1
+#endif
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN SZ_32M
+#define CONFIG_SYS_SDRAM_BASE 0x40000000
+
+/* SDRAM configuration */
+#define PHYS_SDRAM 0x40000000
+#define PHYS_SDRAM_SIZE SZ_2G /* 2GB DDR */
+
+#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
+ (PHYS_SDRAM_SIZE >> 1))
+
+/* UART */
+#define CONFIG_MXC_UART_BASE UART1_BASE_ADDR
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_CBSIZE SZ_2K
+#define CONFIG_SYS_MAXARGS 64
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+/* USDHC */
+#define CONFIG_FSL_USDHC
+#define CONFIG_SYS_FSL_USDHC_NUM 2
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
+#define CONFIG_SYS_I2C_SPEED 100000
+
+/* ENET */
+#define CONFIG_ETHPRIME "FEC"
+#define CONFIG_FEC_XCV_TYPE RGMII
+#define CONFIG_FEC_MXC_PHYADDR 7
+#define FEC_QUIRK_ENET_MAC
+#define IMX_FEC_BASE 0x30BE0000
+
+#endif /*_VERDIN_IMX8MM_H */
+
diff --git a/include/configs/warp7.h b/include/configs/warp7.h
index da894ec0ca..39c00480bd 100644
--- a/include/configs/warp7.h
+++ b/include/configs/warp7.h
@@ -149,12 +149,8 @@
#define CONFIG_SYS_MMC_ENV_DEV 0
#define CONFIG_SYS_MMC_ENV_PART 0
-/* USB Configs */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS 0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Only OTG1 port enabled */
#define CONFIG_IMX_THERMAL
generated by cgit (git 2.34.1) at 2025-01-08 14:02:09 +0000