summaryrefslogtreecommitdiff
path: root/include/configs
diff options
context:
space:
mode:
Diffstat (limited to 'include/configs')
-rw-r--r--include/configs/ls1021atwr.h4
-rw-r--r--include/configs/ls1043aqds.h2
-rw-r--r--include/configs/ls1043ardb.h2
-rw-r--r--include/configs/ls1046aqds.h2
-rw-r--r--include/configs/ls1046ardb.h2
-rw-r--r--include/configs/ls2080a_common.h2
6 files changed, 10 insertions, 4 deletions
diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h
index 7279c89db5..fe87ab3c8c 100644
--- a/include/configs/ls1021atwr.h
+++ b/include/configs/ls1021atwr.h
@@ -133,9 +133,9 @@
* size increases then increase this size in case of secure boot as
* it uses raw u-boot image instead of fit image.
*/
-#define CONFIG_SYS_MONITOR_LEN (0x80000 + CONFIG_U_BOOT_HDR_SIZE)
+#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
#else
-#define CONFIG_SYS_MONITOR_LEN 0x80000
+#define CONFIG_SYS_MONITOR_LEN 0x100000
#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */
#endif
diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index f3b521d705..6a345c0400 100644
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -38,7 +38,9 @@ unsigned long get_board_ddr_clk(void);
#define SPD_EEPROM_ADDRESS 0x51
#define CONFIG_SYS_SPD_BUS_NUM 0
+#ifndef CONFIG_SPL
#define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */
+#endif
#define CONFIG_DDR_ECC
#ifdef CONFIG_DDR_ECC
diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h
index 8fa3bb3a64..f185380ae3 100644
--- a/include/configs/ls1043ardb.h
+++ b/include/configs/ls1043ardb.h
@@ -29,7 +29,9 @@
#define CONFIG_SYS_SPD_BUS_NUM 0
#define CONFIG_FSL_DDR_BIST
+#ifndef CONFIG_SPL
#define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */
+#endif
#define CONFIG_SYS_DDR_RAW_TIMING
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h
index cba22ca2b6..4b3b21eaa1 100644
--- a/include/configs/ls1046aqds.h
+++ b/include/configs/ls1046aqds.h
@@ -38,7 +38,9 @@ unsigned long get_board_ddr_clk(void);
#define SPD_EEPROM_ADDRESS 0x51
#define CONFIG_SYS_SPD_BUS_NUM 0
+#ifndef CONFIG_SPL
#define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */
+#endif
#define CONFIG_DDR_ECC
#ifdef CONFIG_DDR_ECC
diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h
index a96aa650f7..2141b8299a 100644
--- a/include/configs/ls1046ardb.h
+++ b/include/configs/ls1046ardb.h
@@ -34,7 +34,9 @@
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
#define CONFIG_MEM_INIT_VALUE 0xdeadbeef
#define CONFIG_FSL_DDR_BIST /* enable built-in memory test */
+#ifndef CONFIG_SPL
#define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */
+#endif
#ifdef CONFIG_RAMBOOT_PBL
#define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1046ardb/ls1046ardb_pbi.cfg
diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h
index 4ba273aeef..816d7f5a4c 100644
--- a/include/configs/ls2080a_common.h
+++ b/include/configs/ls2080a_common.h
@@ -141,7 +141,6 @@ unsigned long long get_qixis_addr(void);
#define CONFIG_SYS_NAND_BASE_PHYS 0x30000000
/* MC firmware */
-#define CONFIG_FSL_MC_ENET
/* TODO Actual DPL max length needs to be confirmed with the MC FW team */
#define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000
#define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000
@@ -159,7 +158,6 @@ unsigned long long get_qixis_addr(void);
*/
#ifdef CONFIG_FSL_MC_ENET
#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (512UL * 1024 * 1024)
-#define CONFIG_SYS_MC_RSV_MEM_ALIGN (512UL * 1024 * 1024)
#endif
/* Command line configuration */