diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/ls1021atsn.h | 250 | ||||
| -rw-r--r-- | include/configs/ls1021atwr.h | 30 | ||||
| -rw-r--r-- | include/configs/ls1028a_common.h | 4 | ||||
| -rw-r--r-- | include/configs/rk3036_common.h | 7 | ||||
| -rw-r--r-- | include/configs/rk3128_common.h | 7 | ||||
| -rw-r--r-- | include/configs/rk322x_common.h | 7 | ||||
| -rw-r--r-- | include/configs/rk3288_common.h | 9 | ||||
| -rw-r--r-- | include/configs/rk3368_common.h | 3 | ||||
| -rw-r--r-- | include/configs/rk3399_common.h | 1 | ||||
| -rw-r--r-- | include/configs/sifive-fu540.h | 18 | ||||
| -rw-r--r-- | include/configs/tinker_rk3288.h | 1 |
11 files changed, 288 insertions, 49 deletions
diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h new file mode 100644 index 0000000000..b011cb2a84 --- /dev/null +++ b/include/configs/ls1021atsn.h @@ -0,0 +1,250 @@ +/* SPDX-License-Identifier: GPL-2.0 + * Copyright 2016-2018 NXP Semiconductors + * Copyright 2019 Vladimir Oltean <olteanv@gmail.com> + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR + +#define CONFIG_SYS_FSL_CLK + +#define CONFIG_DEEP_SLEEP + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024 * 1024) + +#define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE + +/* XHCI Support - enabled by default */ +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 + +#define CONFIG_SYS_CLK_FREQ 100000000 +#define CONFIG_DDR_CLK_FREQ 100000000 + +#define DDR_SDRAM_CFG 0x470c0008 +#define DDR_CS0_BNDS 0x008000bf +#define DDR_CS0_CONFIG 0x80014302 +#define DDR_TIMING_CFG_0 0x50550004 +#define DDR_TIMING_CFG_1 0xbcb38c56 +#define DDR_TIMING_CFG_2 0x0040d120 +#define DDR_TIMING_CFG_3 0x010e1000 +#define DDR_TIMING_CFG_4 0x00000001 +#define DDR_TIMING_CFG_5 0x03401400 +#define DDR_SDRAM_CFG_2 0x00401010 +#define DDR_SDRAM_MODE 0x00061c60 +#define DDR_SDRAM_MODE_2 0x00180000 +#define DDR_SDRAM_INTERVAL 0x18600618 +#define DDR_DDR_WRLVL_CNTL 0x8655f605 +#define DDR_DDR_WRLVL_CNTL_2 0x05060607 +#define DDR_DDR_WRLVL_CNTL_3 0x05050505 +#define DDR_DDR_CDR1 0x80040000 +#define DDR_DDR_CDR2 0x00000001 +#define DDR_SDRAM_CLK_CNTL 0x02000000 +#define DDR_DDR_ZQ_CNTL 0x89080600 +#define DDR_CS0_CONFIG_2 0 +#define DDR_SDRAM_CFG_MEM_EN 0x80000000 +#define SDRAM_CFG2_D_INIT 0x00000010 +#define DDR_CDR2_VREF_TRAIN_EN 0x00000080 +#define SDRAM_CFG2_FRC_SR 0x80000000 +#define SDRAM_CFG_BI 0x00000001 + +#ifdef CONFIG_RAMBOOT_PBL +#define CONFIG_SYS_FSL_PBL_PBI \ + "board/freescale/ls1021atsn/ls102xa_pbi.cfg" +#endif + +#ifdef CONFIG_SD_BOOT +#define CONFIG_SYS_FSL_PBL_RCW \ + "board/freescale/ls1021atsn/ls102xa_rcw_sd.cfg" + +#ifdef CONFIG_SECURE_BOOT +#define CONFIG_U_BOOT_HDR_SIZE (16 << 10) +#endif /* ifdef CONFIG_SECURE_BOOT */ + +#define CONFIG_SPL_MAX_SIZE 0x1a000 +#define CONFIG_SPL_STACK 0x1001d000 +#define CONFIG_SPL_PAD_TO 0x1c000 + +#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_TEXT_BASE + \ + CONFIG_SYS_MONITOR_LEN) +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 +#define CONFIG_SPL_BSS_START_ADDR 0x80100000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 + +#ifdef CONFIG_U_BOOT_HDR_SIZE +/* + * HDR would be appended at end of image and copied to DDR along + * with U-Boot image. Here u-boot max. size is 512K. So if binary + * size increases then increase this size in case of secure boot as + * it uses raw U-Boot image instead of FIT image. + */ +#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE) +#else +#define CONFIG_SYS_MONITOR_LEN 0x100000 +#endif /* ifdef CONFIG_U_BOOT_HDR_SIZE */ +#endif + +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x80000000 +#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) + +#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +#define CONFIG_CHIP_SELECTS_PER_CTRL 4 + +/* Serial Port */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550_SERIAL +#ifndef CONFIG_DM_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#endif +#define CONFIG_SYS_NS16550_CLK get_serial_clock() + +#define CONFIG_BAUDRATE 115200 + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_MXC +#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ +#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ +#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ + +/* EEPROM */ +#define CONFIG_ID_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#define CONFIG_SYS_EEPROM_BUS_NUM 0 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x51 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 + +/* QSPI */ +#define FSL_QSPI_FLASH_SIZE (1 << 24) +#define FSL_QSPI_FLASH_NUM 2 + +/* PCIe */ +#define CONFIG_PCIE1 /* PCIE controller 1 */ +#define CONFIG_PCIE2 /* PCIE controller 2 */ +#define FSL_PCIE_COMPAT "fsl,ls1021a-pcie" +#ifdef CONFIG_PCI +#define CONFIG_PCI_SCAN_SHOW +#endif + +#define CONFIG_LAYERSCAPE_NS_ACCESS +#define COUNTER_FREQUENCY 12500000 + +#define CONFIG_HWCONFIG +#define HWCONFIG_BUFFER_SIZE 256 + +#define CONFIG_FSL_DEVICE_DISABLE + +#define BOOT_TARGET_DEVICES(func) \ + func(MMC, mmc, 0) \ + func(USB, usb, 0) \ + func(DHCP, dhcp, na) +#include <config_distro_bootcmd.h> + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ + "initrd_high=0xffffffff\0" \ + "fdt_high=0xffffffff\0" \ + "fdt_addr=0x64f00000\0" \ + "kernel_addr=0x61000000\0" \ + "kernelheader_addr=0x60800000\0" \ + "scriptaddr=0x80000000\0" \ + "scripthdraddr=0x80080000\0" \ + "fdtheader_addr_r=0x80100000\0" \ + "kernelheader_addr_r=0x80200000\0" \ + "kernel_addr_r=0x80008000\0" \ + "kernelheader_size=0x40000\0" \ + "fdt_addr_r=0x8f000000\0" \ + "ramdisk_addr_r=0xa0000000\0" \ + "load_addr=0x80008000\0" \ + "kernel_size=0x2800000\0" \ + "kernel_addr_sd=0x8000\0" \ + "kernel_size_sd=0x14000\0" \ + "kernelhdr_addr_sd=0x4000\0" \ + "kernelhdr_size_sd=0x10\0" \ + BOOTENV \ + "boot_scripts=ls1021atsn_boot.scr\0" \ + "boot_script_hdr=hdr_ls1021atsn_bs.out\0" \ + "scan_dev_for_boot_part=" \ + "part list ${devtype} ${devnum} devplist; " \ + "env exists devplist || setenv devplist 1; " \ + "for distro_bootpart in ${devplist}; do " \ + "if fstype ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "bootfstype; then " \ + "run scan_dev_for_boot; " \ + "fi; " \ + "done\0" \ + "scan_dev_for_boot=" \ + "echo Scanning ${devtype} " \ + "${devnum}:${distro_bootpart}...; " \ + "for prefix in ${boot_prefixes}; do " \ + "run scan_dev_for_scripts; " \ + "run scan_dev_for_extlinux; " \ + "done;" \ + "\0" \ + "boot_a_script=" \ + "load ${devtype} ${devnum}:${distro_bootpart} " \ + "${scriptaddr} ${prefix}${script}; " \ + "env exists secureboot && load ${devtype} " \ + "${devnum}:${distro_bootpart} " \ + "${scripthdraddr} ${prefix}${boot_script_hdr} " \ + "&& esbc_validate ${scripthdraddr};" \ + "source ${scriptaddr}\0" \ + "qspi_bootcmd=echo Trying load from qspi..;" \ + "sf probe && sf read $load_addr " \ + "$kernel_addr $kernel_size; env exists secureboot " \ + "&& sf read $kernelheader_addr_r $kernelheader_addr " \ + "$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \ + "bootm $load_addr#$board\0" \ + "sd_bootcmd=echo Trying load from SD ..;" \ + "mmcinfo && mmc read $load_addr " \ + "$kernel_addr_sd $kernel_size_sd && " \ + "env exists secureboot && mmc read $kernelheader_addr_r " \ + "$kernelhdr_addr_sd $kernelhdr_size_sd " \ + " && esbc_validate ${kernelheader_addr_r};" \ + "bootm $load_addr#$board\0" + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_LOAD_ADDR 0x82000000 + +#define CONFIG_LS102XA_STREAM_ID + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE +#else +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ +#endif + +/* Environment */ +#define CONFIG_ENV_OVERWRITE + +#if defined(CONFIG_SD_BOOT) +#define CONFIG_ENV_OFFSET 0x300000 +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_SIZE 0x20000 +#elif defined(CONFIG_QSPI_BOOT) +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_OFFSET 0x300000 +#define CONFIG_ENV_SECT_SIZE 0x40000 +#endif + +#define CONFIG_SYS_BOOTM_LEN 0x8000000 /* 128 MB */ + +#endif diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index de0c9c7f26..31abee81ed 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -260,33 +260,7 @@ */ #ifdef CONFIG_TSEC_ENET -#define CONFIG_MII_DEFAULT_TSEC 1 -#define CONFIG_TSEC1 1 -#define CONFIG_TSEC1_NAME "eTSEC1" -#define CONFIG_TSEC2 1 -#define CONFIG_TSEC2_NAME "eTSEC2" -#define CONFIG_TSEC3 1 -#define CONFIG_TSEC3_NAME "eTSEC3" - -#define TSEC1_PHY_ADDR 2 -#define TSEC2_PHY_ADDR 0 -#define TSEC3_PHY_ADDR 1 - -#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) -#define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) - -#define TSEC1_PHYIDX 0 -#define TSEC2_PHYIDX 0 -#define TSEC3_PHYIDX 0 - -#define CONFIG_ETHPRIME "eTSEC1" - -#define CONFIG_PHY_ATHEROS - -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH2 +#define CONFIG_ETHPRIME "ethernet@2d10000" #endif /* PCIe */ @@ -444,7 +418,7 @@ #undef CONFIG_BOOTCOMMAND #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) -#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd" \ +#define CONFIG_BOOTCOMMAND "run distro_bootcmd; run qspi_bootcmd; " \ "env exists secureboot && esbc_halt" #elif defined(CONFIG_SD_BOOT) #define CONFIG_BOOTCOMMAND "run distro_bootcmd; run sd_bootcmd; " \ diff --git a/include/configs/ls1028a_common.h b/include/configs/ls1028a_common.h index 896d7a33b5..a6c7c3753d 100644 --- a/include/configs/ls1028a_common.h +++ b/include/configs/ls1028a_common.h @@ -194,4 +194,8 @@ #include <asm/fsl_secure_boot.h> #endif +/* Ethernet */ +/* smallest ENETC BD ring has 8 entries */ +#define CONFIG_SYS_RX_ETH_BUFFER 8 + #endif /* __L1028A_COMMON_H */ diff --git a/include/configs/rk3036_common.h b/include/configs/rk3036_common.h index f5d09d18e5..73be079b20 100644 --- a/include/configs/rk3036_common.h +++ b/include/configs/rk3036_common.h @@ -12,9 +12,10 @@ #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_TIMER_RATE (24 * 1000 * 1000) -#define CONFIG_SYS_TIMER_BASE 0x200440a0 /* TIMER5 */ -#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8) +#define CONFIG_ROCKCHIP_STIMER_BASE 0x200440a0 +#define COUNTER_FREQUENCY 24000000 +#define CONFIG_SYS_ARCH_TIMER +#define CONFIG_SYS_HZ_CLOCK 24000000 #define CONFIG_SYS_INIT_SP_ADDR 0x60100000 #define CONFIG_SYS_LOAD_ADDR 0x60800800 diff --git a/include/configs/rk3128_common.h b/include/configs/rk3128_common.h index 0c08d7af5b..20d62439fb 100644 --- a/include/configs/rk3128_common.h +++ b/include/configs/rk3128_common.h @@ -14,9 +14,10 @@ #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_TIMER_RATE (24 * 1000 * 1000) -#define CONFIG_SYS_TIMER_BASE 0x200440a0 /* TIMER5 */ -#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8) +#define CONFIG_ROCKCHIP_STIMER_BASE 0x200440a0 +#define COUNTER_FREQUENCY 24000000 +#define CONFIG_SYS_ARCH_TIMER +#define CONFIG_SYS_HZ_CLOCK 24000000 #define CONFIG_SYS_INIT_SP_ADDR 0x60100000 #define CONFIG_SYS_LOAD_ADDR 0x60800800 diff --git a/include/configs/rk322x_common.h b/include/configs/rk322x_common.h index 15bb8d63b8..cc08699944 100644 --- a/include/configs/rk322x_common.h +++ b/include/configs/rk322x_common.h @@ -13,9 +13,10 @@ #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */ -#define CONFIG_SYS_TIMER_RATE (24 * 1000 * 1000) -#define CONFIG_SYS_TIMER_BASE 0x110c00a0 /* TIMER5 */ -#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8) +#define CONFIG_ROCKCHIP_STIMER_BASE 0x110d0020 +#define COUNTER_FREQUENCY 24000000 +#define CONFIG_SYS_ARCH_TIMER +#define CONFIG_SYS_HZ_CLOCK 24000000 #define CONFIG_SYS_INIT_SP_ADDR 0x61100000 #define CONFIG_SYS_LOAD_ADDR 0x61800800 diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h index 7c79ed6138..5472a90633 100644 --- a/include/configs/rk3288_common.h +++ b/include/configs/rk3288_common.h @@ -13,9 +13,10 @@ #define CONFIG_SYS_MALLOC_LEN (32 << 20) #define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_TIMER_RATE (24 * 1000 * 1000) -#define CONFIG_SYS_TIMER_BASE 0xff810020 /* TIMER7 */ -#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8) +#define CONFIG_ROCKCHIP_STIMER_BASE 0xff810020 +#define COUNTER_FREQUENCY 24000000 +#define CONFIG_SYS_ARCH_TIMER +#define CONFIG_SYS_HZ_CLOCK 24000000 #ifdef CONFIG_SPL_ROCKCHIP_BACK_TO_BROM /* Bootrom will load u-boot binary to 0x0 once return from SPL */ @@ -35,6 +36,8 @@ #define SDRAM_BANK_SIZE (2UL << 30) #define SDRAM_MAX_SIZE 0xfe000000 +#define CONFIG_SYS_MONITOR_LEN (600 * 1024) + #ifndef CONFIG_SPL_BUILD /* usb otg */ diff --git a/include/configs/rk3368_common.h b/include/configs/rk3368_common.h index 13630ba386..8a1e3118ae 100644 --- a/include/configs/rk3368_common.h +++ b/include/configs/rk3368_common.h @@ -20,7 +20,8 @@ #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SKIP_LOWLEVEL_INIT -#define COUNTER_FREQUENCY 24000000 +#define CONFIG_ROCKCHIP_STIMER_BASE 0xff830020 +#define COUNTER_FREQUENCY 24000000 #define CONFIG_SYS_NS16550_MEM32 diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h index f31f2658bb..8df0180284 100644 --- a/include/configs/rk3399_common.h +++ b/include/configs/rk3399_common.h @@ -13,6 +13,7 @@ #define CONFIG_SKIP_LOWLEVEL_INIT #define COUNTER_FREQUENCY 24000000 +#define CONFIG_ROCKCHIP_STIMER_BASE 0xff8680a0 #define CONFIG_SYS_NS16550_MEM32 diff --git a/include/configs/sifive-fu540.h b/include/configs/sifive-fu540.h index 7007b5f6af..858b7a7da1 100644 --- a/include/configs/sifive-fu540.h +++ b/include/configs/sifive-fu540.h @@ -18,12 +18,12 @@ #define CONFIG_SYS_MALLOC_LEN SZ_8M -#define CONFIG_SYS_BOOTM_LEN SZ_16M +#define CONFIG_SYS_BOOTM_LEN SZ_64M #define CONFIG_STANDALONE_LOAD_ADDR 0x80200000 /* Environment options */ -#define CONFIG_ENV_SIZE SZ_4K +#define CONFIG_ENV_SIZE SZ_128K #define BOOT_TARGET_DEVICES(func) \ func(DHCP, dhcp, na) @@ -33,11 +33,15 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "fdt_high=0xffffffffffffffff\0" \ "initrd_high=0xffffffffffffffff\0" \ - "kernel_addr_r=0x80600000\0" \ - "fdt_addr_r=0x82200000\0" \ - "scriptaddr=0x82300000\0" \ - "pxefile_addr_r=0x82400000\0" \ - "ramdisk_addr_r=0x82500000\0" \ + "kernel_addr_r=0x84000000\0" \ + "fdt_addr_r=0x88000000\0" \ + "scriptaddr=0x88100000\0" \ + "pxefile_addr_r=0x88200000\0" \ + "ramdisk_addr_r=0x88300000\0" \ BOOTENV +#define CONFIG_PREBOOT \ + "setenv fdt_addr ${fdtcontroladdr};" \ + "fdt addr ${fdtcontroladdr};" + #endif /* __CONFIG_H */ diff --git a/include/configs/tinker_rk3288.h b/include/configs/tinker_rk3288.h index 32057b3dbb..5adae68c91 100644 --- a/include/configs/tinker_rk3288.h +++ b/include/configs/tinker_rk3288.h @@ -18,6 +18,5 @@ func(DHCP, dchp, na) #define CONFIG_SYS_MMC_ENV_DEV 1 -#define CONFIG_SYS_MONITOR_LEN (600 * 1024) #endif |