diff options
Diffstat (limited to 'include/configs')
| -rw-r--r-- | include/configs/tk71.h | 112 |
1 files changed, 0 insertions, 112 deletions
diff --git a/include/configs/tk71.h b/include/configs/tk71.h deleted file mode 100644 index 46e8c90b45..0000000000 --- a/include/configs/tk71.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - * Copyright (C) 2012 Marek Vasut <marex@denx.de> - * on behalf of DENX Software Engineering GmbH - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_TK71_H__ -#define __CONFIG_TK71_H__ - -/* - * Version number information - */ -#define CONFIG_IDENT_STRING "\nKa-Ro TK71" - -/* - * High Level Configuration Options (easy to change) - */ -#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ -#define CONFIG_KW88F6281 1 /* SOC Name */ -#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ -#define CONFIG_NR_DRAM_BANKS 1 - -#define MACH_TYPE_TK71 2399 -#define CONFIG_MACH_TYPE MACH_TYPE_TK71 - -/* - * Commands configuration - */ -#define CONFIG_SYS_HUSH_PARSER - -#define CONFIG_SYS_NO_FLASH -#define CONFIG_DOS_PARTITION -#define CONFIG_SUPPORT_VFAT - -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_ENV -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_NAND -#define CONFIG_CMD_PING -#define CONFIG_CMD_USB - -/* - * mv-common.h should be defined after CMD configs since it used them - * to enable certain macros - */ -#include "mv-common.h" - -/* - * NAND flash - */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_MTD_DEVICE -#define CONFIG_MTD_PARTITIONS -#define CONFIG_JFFS2_NAND -#define CONFIG_JFFS2_DEV "nand0,3" -#endif - -/* - * Ethernet Driver configuration - */ -#ifdef CONFIG_CMD_NET -#define CONFIG_MVGBE_PORTS {1, 0} -#define CONFIG_PHY_BASE_ADR 0x08 -#endif - -/* - * USB/EHCI - */ -#ifdef CONFIG_CMD_USB -#define CONFIG_USB_EHCI -#define CONFIG_USB_EHCI_KIRKWOOD -#define CONFIG_EHCI_IS_TDI -#define CONFIG_USB_STORAGE -#endif - -/* - * Environment variables configurations - */ -#ifdef CONFIG_CMD_NAND -#define CONFIG_ENV_IS_IN_NAND -#define CONFIG_ENV_SECT_SIZE 0x20000 -#else -#define CONFIG_ENV_IS_NOWHERE -#endif - -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_ADDR 0x80000 -#define CONFIG_ENV_OFFSET 0x80000 - -/* - * Default environment variables - */ -#define CONFIG_BOOTCOMMAND "nand read 0x800000 kernel 0x300000; bootm;" -#define CONFIG_MTDPARTS "512K(u-boot),512K(u-boot-env),3M(kernel),-(root)" -#define CONFIG_EXTRA_ENV_SETTINGS \ - "update_uboot=dhcp u-boot.kwb; nand erase.part u-boot; nand write ${fileaddr} u-boot ${filesize}\0" \ - "update_kernel=dhcp uImage-tk71; nand erase.part kernel; nand write ${fileaddr} kernel ${filesize} \0" \ - "update_rootfs=dhcp rootfs-tk71; nand erase.part root; nand write ${fileaddr} root ${filesize}\0" \ - "update_all=run update_uboot; run update_kernel; run update_rootfs; reset\0" \ - "mtdids=nand0=orion_nand\0" \ - "mtdparts=mtdparts=orion_nand:"CONFIG_MTDPARTS"\0" \ - "bootargs=console=ttyS0,115200 mtdparts=orion_nand:"CONFIG_MTDPARTS" rootfstype=jffs2 root=/dev/mtdblock3 rw\0" -#define MTDIDS_DEFAULT "nand0=orion_nand" -#define MTDPARTS_DEFAULT "mtdparts=orion_nand:"CONFIG_MTDPARTS - -#define PHYS_SDRAM_1 0x00000000 /* Base address */ -#define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */ - -#endif /* __CONFIG_TK71_H__ */ |