diff options
Diffstat (limited to 'include/fsl-mc/fsl_dpni.h')
| -rw-r--r-- | include/fsl-mc/fsl_dpni.h | 1093 |
1 files changed, 1093 insertions, 0 deletions
diff --git a/include/fsl-mc/fsl_dpni.h b/include/fsl-mc/fsl_dpni.h new file mode 100644 index 0000000000..67c087d469 --- /dev/null +++ b/include/fsl-mc/fsl_dpni.h @@ -0,0 +1,1093 @@ +/* + * Copyright (C) 2013-2015 Freescale Semiconductor + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#ifndef _FSL_DPNI_H +#define _FSL_DPNI_H + +/* DPNI Version */ +#define DPNI_VER_MAJOR 4 +#define DPNI_VER_MINOR 0 + +/* Command IDs */ +#define DPNI_CMDID_OPEN 0x801 +#define DPNI_CMDID_CLOSE 0x800 + +#define DPNI_CMDID_ENABLE 0x002 +#define DPNI_CMDID_DISABLE 0x003 +#define DPNI_CMDID_GET_ATTR 0x004 +#define DPNI_CMDID_RESET 0x005 + +#define DPNI_CMDID_SET_POOLS 0x200 +#define DPNI_CMDID_GET_RX_BUFFER_LAYOUT 0x201 +#define DPNI_CMDID_SET_RX_BUFFER_LAYOUT 0x202 +#define DPNI_CMDID_GET_TX_BUFFER_LAYOUT 0x203 +#define DPNI_CMDID_SET_TX_BUFFER_LAYOUT 0x204 +#define DPNI_CMDID_SET_TX_CONF_BUFFER_LAYOUT 0x205 +#define DPNI_CMDID_GET_TX_CONF_BUFFER_LAYOUT 0x206 + +#define DPNI_CMDID_GET_QDID 0x210 +#define DPNI_CMDID_GET_TX_DATA_OFFSET 0x212 +#define DPNI_CMDID_GET_COUNTER 0x213 +#define DPNI_CMDID_SET_COUNTER 0x214 +#define DPNI_CMDID_GET_LINK_STATE 0x215 +#define DPNI_CMDID_SET_LINK_CFG 0x21A + +#define DPNI_CMDID_SET_PRIM_MAC 0x224 +#define DPNI_CMDID_GET_PRIM_MAC 0x225 +#define DPNI_CMDID_ADD_MAC_ADDR 0x226 +#define DPNI_CMDID_REMOVE_MAC_ADDR 0x227 + +#define DPNI_CMDID_SET_TX_FLOW 0x236 +#define DPNI_CMDID_GET_TX_FLOW 0x237 +#define DPNI_CMDID_SET_RX_FLOW 0x238 +#define DPNI_CMDID_GET_RX_FLOW 0x239 + +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_CMD_OPEN(cmd, dpni_id) \ + MC_CMD_OP(cmd, 0, 0, 32, int, dpni_id) + + +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_CMD_SET_POOLS(cmd, cfg) \ +do { \ + MC_CMD_OP(cmd, 0, 0, 8, uint8_t, cfg->num_dpbp); \ + MC_CMD_OP(cmd, 0, 32, 32, int, cfg->pools[0].dpbp_id); \ + MC_CMD_OP(cmd, 4, 32, 16, uint16_t, cfg->pools[0].buffer_size);\ + MC_CMD_OP(cmd, 1, 0, 32, int, cfg->pools[1].dpbp_id); \ + MC_CMD_OP(cmd, 4, 48, 16, uint16_t, cfg->pools[1].buffer_size);\ + MC_CMD_OP(cmd, 1, 32, 32, int, cfg->pools[2].dpbp_id); \ + MC_CMD_OP(cmd, 5, 0, 16, uint16_t, cfg->pools[2].buffer_size);\ + MC_CMD_OP(cmd, 2, 0, 32, int, cfg->pools[3].dpbp_id); \ + MC_CMD_OP(cmd, 5, 16, 16, uint16_t, cfg->pools[3].buffer_size);\ + MC_CMD_OP(cmd, 2, 32, 32, int, cfg->pools[4].dpbp_id); \ + MC_CMD_OP(cmd, 5, 32, 16, uint16_t, cfg->pools[4].buffer_size);\ + MC_CMD_OP(cmd, 3, 0, 32, int, cfg->pools[5].dpbp_id); \ + MC_CMD_OP(cmd, 5, 48, 16, uint16_t, cfg->pools[5].buffer_size);\ + MC_CMD_OP(cmd, 3, 32, 32, int, cfg->pools[6].dpbp_id); \ + MC_CMD_OP(cmd, 6, 0, 16, uint16_t, cfg->pools[6].buffer_size);\ + MC_CMD_OP(cmd, 4, 0, 32, int, cfg->pools[7].dpbp_id); \ + MC_CMD_OP(cmd, 6, 16, 16, uint16_t, cfg->pools[7].buffer_size);\ +} while (0) + +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_RSP_GET_ATTR(cmd, attr) \ +do { \ + MC_RSP_OP(cmd, 0, 0, 32, int, attr->id);\ + MC_RSP_OP(cmd, 0, 32, 8, uint8_t, attr->max_tcs); \ + MC_RSP_OP(cmd, 0, 40, 8, uint8_t, attr->max_senders); \ + MC_RSP_OP(cmd, 0, 48, 8, enum net_prot, attr->start_hdr); \ + MC_RSP_OP(cmd, 1, 0, 64, uint64_t, attr->options); \ + MC_RSP_OP(cmd, 2, 0, 8, uint8_t, attr->max_unicast_filters); \ + MC_RSP_OP(cmd, 2, 8, 8, uint8_t, attr->max_multicast_filters);\ + MC_RSP_OP(cmd, 2, 16, 8, uint8_t, attr->max_vlan_filters); \ + MC_RSP_OP(cmd, 2, 24, 8, uint8_t, attr->max_qos_entries); \ + MC_RSP_OP(cmd, 2, 32, 8, uint8_t, attr->max_qos_key_size); \ + MC_RSP_OP(cmd, 2, 40, 8, uint8_t, attr->max_dist_key_size); \ + MC_RSP_OP(cmd, 3, 0, 8, uint8_t, attr->max_dist_per_tc[0]); \ + MC_RSP_OP(cmd, 3, 8, 8, uint8_t, attr->max_dist_per_tc[1]); \ + MC_RSP_OP(cmd, 3, 16, 8, uint8_t, attr->max_dist_per_tc[2]); \ + MC_RSP_OP(cmd, 3, 24, 8, uint8_t, attr->max_dist_per_tc[3]); \ + MC_RSP_OP(cmd, 3, 32, 8, uint8_t, attr->max_dist_per_tc[4]); \ + MC_RSP_OP(cmd, 3, 40, 8, uint8_t, attr->max_dist_per_tc[5]); \ + MC_RSP_OP(cmd, 3, 48, 8, uint8_t, attr->max_dist_per_tc[6]); \ + MC_RSP_OP(cmd, 3, 56, 8, uint8_t, attr->max_dist_per_tc[7]); \ + MC_RSP_OP(cmd, 4, 0, 16, uint16_t, \ + attr->ipr_cfg.max_reass_frm_size); \ + MC_RSP_OP(cmd, 4, 16, 16, uint16_t, \ + attr->ipr_cfg.min_frag_size_ipv4); \ + MC_RSP_OP(cmd, 4, 32, 16, uint16_t, \ + attr->ipr_cfg.min_frag_size_ipv6); \ + MC_RSP_OP(cmd, 5, 0, 16, uint16_t, \ + attr->ipr_cfg.max_open_frames_ipv4); \ + MC_RSP_OP(cmd, 5, 16, 16, uint16_t, \ + attr->ipr_cfg.max_open_frames_ipv6); \ + MC_RSP_OP(cmd, 5, 32, 16, uint16_t, attr->version.major);\ + MC_RSP_OP(cmd, 5, 48, 16, uint16_t, attr->version.minor);\ +} while (0) + +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_RSP_GET_RX_BUFFER_LAYOUT(cmd, layout) \ +do { \ + MC_RSP_OP(cmd, 0, 0, 16, uint16_t, layout->private_data_size); \ + MC_RSP_OP(cmd, 0, 16, 16, uint16_t, layout->data_align); \ + MC_RSP_OP(cmd, 1, 0, 1, int, layout->pass_timestamp); \ + MC_RSP_OP(cmd, 1, 1, 1, int, layout->pass_parser_result); \ + MC_RSP_OP(cmd, 1, 2, 1, int, layout->pass_frame_status); \ + MC_RSP_OP(cmd, 1, 16, 16, uint16_t, layout->data_head_room); \ + MC_RSP_OP(cmd, 1, 32, 16, uint16_t, layout->data_tail_room); \ +} while (0) + +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_CMD_SET_RX_BUFFER_LAYOUT(cmd, layout) \ +do { \ + MC_CMD_OP(cmd, 0, 0, 16, uint16_t, layout->private_data_size); \ + MC_CMD_OP(cmd, 0, 16, 16, uint16_t, layout->data_align); \ + MC_CMD_OP(cmd, 0, 32, 32, uint32_t, layout->options); \ + MC_CMD_OP(cmd, 1, 0, 1, int, layout->pass_timestamp); \ + MC_CMD_OP(cmd, 1, 1, 1, int, layout->pass_parser_result); \ + MC_CMD_OP(cmd, 1, 2, 1, int, layout->pass_frame_status); \ + MC_CMD_OP(cmd, 1, 16, 16, uint16_t, layout->data_head_room); \ + MC_CMD_OP(cmd, 1, 32, 16, uint16_t, layout->data_tail_room); \ +} while (0) + +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_RSP_GET_TX_BUFFER_LAYOUT(cmd, layout) \ +do { \ + MC_RSP_OP(cmd, 0, 0, 16, uint16_t, layout->private_data_size); \ + MC_RSP_OP(cmd, 0, 16, 16, uint16_t, layout->data_align); \ + MC_RSP_OP(cmd, 1, 0, 1, int, layout->pass_timestamp); \ + MC_RSP_OP(cmd, 1, 1, 1, int, layout->pass_parser_result); \ + MC_RSP_OP(cmd, 1, 2, 1, int, layout->pass_frame_status); \ + MC_RSP_OP(cmd, 1, 16, 16, uint16_t, layout->data_head_room); \ + MC_RSP_OP(cmd, 1, 32, 16, uint16_t, layout->data_tail_room); \ +} while (0) + +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_CMD_SET_TX_BUFFER_LAYOUT(cmd, layout) \ +do { \ + MC_CMD_OP(cmd, 0, 0, 16, uint16_t, layout->private_data_size); \ + MC_CMD_OP(cmd, 0, 16, 16, uint16_t, layout->data_align); \ + MC_CMD_OP(cmd, 0, 32, 32, uint32_t, layout->options); \ + MC_CMD_OP(cmd, 1, 0, 1, int, layout->pass_timestamp); \ + MC_CMD_OP(cmd, 1, 1, 1, int, layout->pass_parser_result); \ + MC_CMD_OP(cmd, 1, 2, 1, int, layout->pass_frame_status); \ + MC_CMD_OP(cmd, 1, 16, 16, uint16_t, layout->data_head_room); \ + MC_CMD_OP(cmd, 1, 32, 16, uint16_t, layout->data_tail_room); \ +} while (0) + +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_RSP_GET_TX_CONF_BUFFER_LAYOUT(cmd, layout) \ +do { \ + MC_RSP_OP(cmd, 0, 0, 16, uint16_t, layout->private_data_size); \ + MC_RSP_OP(cmd, 0, 16, 16, uint16_t, layout->data_align); \ + MC_RSP_OP(cmd, 1, 0, 1, int, layout->pass_timestamp); \ + MC_RSP_OP(cmd, 1, 1, 1, int, layout->pass_parser_result); \ + MC_RSP_OP(cmd, 1, 2, 1, int, layout->pass_frame_status); \ + MC_RSP_OP(cmd, 1, 16, 16, uint16_t, layout->data_head_room); \ + MC_RSP_OP(cmd, 1, 32, 16, uint16_t, layout->data_tail_room); \ +} while (0) + +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_CMD_SET_TX_CONF_BUFFER_LAYOUT(cmd, layout) \ +do { \ + MC_CMD_OP(cmd, 0, 0, 16, uint16_t, layout->private_data_size); \ + MC_CMD_OP(cmd, 0, 16, 16, uint16_t, layout->data_align); \ + MC_CMD_OP(cmd, 0, 32, 32, uint32_t, layout->options); \ + MC_CMD_OP(cmd, 1, 0, 1, int, layout->pass_timestamp); \ + MC_CMD_OP(cmd, 1, 1, 1, int, layout->pass_parser_result); \ + MC_CMD_OP(cmd, 1, 2, 1, int, layout->pass_frame_status); \ + MC_CMD_OP(cmd, 1, 16, 16, uint16_t, layout->data_head_room); \ + MC_CMD_OP(cmd, 1, 32, 16, uint16_t, layout->data_tail_room); \ +} while (0) + +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_RSP_GET_QDID(cmd, qdid) \ + MC_RSP_OP(cmd, 0, 0, 16, uint16_t, qdid) + +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_RSP_GET_TX_DATA_OFFSET(cmd, data_offset) \ + MC_RSP_OP(cmd, 0, 0, 16, uint16_t, data_offset) + +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_CMD_GET_COUNTER(cmd, counter) \ + MC_CMD_OP(cmd, 0, 0, 16, enum dpni_counter, counter) + +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_RSP_GET_COUNTER(cmd, value) \ + MC_RSP_OP(cmd, 1, 0, 64, uint64_t, value) + +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_CMD_SET_COUNTER(cmd, counter, value) \ +do { \ + MC_CMD_OP(cmd, 0, 0, 16, enum dpni_counter, counter); \ + MC_CMD_OP(cmd, 1, 0, 64, uint64_t, value); \ +} while (0) + +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_CMD_SET_LINK_CFG(cmd, cfg) \ +do { \ + MC_CMD_OP(cmd, 1, 0, 64, uint64_t, cfg->rate);\ + MC_CMD_OP(cmd, 2, 0, 64, uint64_t, cfg->options);\ +} while (0) + +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_RSP_GET_LINK_STATE(cmd, state) \ +do { \ + MC_RSP_OP(cmd, 0, 32, 1, int, state->up);\ + MC_RSP_OP(cmd, 1, 0, 64, uint64_t, state->rate);\ + MC_RSP_OP(cmd, 2, 0, 64, uint64_t, state->options);\ +} while (0) + + + +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_CMD_SET_PRIMARY_MAC_ADDR(cmd, mac_addr) \ +do { \ + MC_CMD_OP(cmd, 0, 16, 8, uint8_t, mac_addr[5]); \ + MC_CMD_OP(cmd, 0, 24, 8, uint8_t, mac_addr[4]); \ + MC_CMD_OP(cmd, 0, 32, 8, uint8_t, mac_addr[3]); \ + MC_CMD_OP(cmd, 0, 40, 8, uint8_t, mac_addr[2]); \ + MC_CMD_OP(cmd, 0, 48, 8, uint8_t, mac_addr[1]); \ + MC_CMD_OP(cmd, 0, 56, 8, uint8_t, mac_addr[0]); \ +} while (0) + +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_RSP_GET_PRIMARY_MAC_ADDR(cmd, mac_addr) \ +do { \ + MC_RSP_OP(cmd, 0, 16, 8, uint8_t, mac_addr[5]); \ + MC_RSP_OP(cmd, 0, 24, 8, uint8_t, mac_addr[4]); \ + MC_RSP_OP(cmd, 0, 32, 8, uint8_t, mac_addr[3]); \ + MC_RSP_OP(cmd, 0, 40, 8, uint8_t, mac_addr[2]); \ + MC_RSP_OP(cmd, 0, 48, 8, uint8_t, mac_addr[1]); \ + MC_RSP_OP(cmd, 0, 56, 8, uint8_t, mac_addr[0]); \ +} while (0) + +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_CMD_ADD_MAC_ADDR(cmd, mac_addr) \ +do { \ + MC_CMD_OP(cmd, 0, 16, 8, uint8_t, mac_addr[5]); \ + MC_CMD_OP(cmd, 0, 24, 8, uint8_t, mac_addr[4]); \ + MC_CMD_OP(cmd, 0, 32, 8, uint8_t, mac_addr[3]); \ + MC_CMD_OP(cmd, 0, 40, 8, uint8_t, mac_addr[2]); \ + MC_CMD_OP(cmd, 0, 48, 8, uint8_t, mac_addr[1]); \ + MC_CMD_OP(cmd, 0, 56, 8, uint8_t, mac_addr[0]); \ +} while (0) + +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_CMD_REMOVE_MAC_ADDR(cmd, mac_addr) \ +do { \ + MC_CMD_OP(cmd, 0, 16, 8, uint8_t, mac_addr[5]); \ + MC_CMD_OP(cmd, 0, 24, 8, uint8_t, mac_addr[4]); \ + MC_CMD_OP(cmd, 0, 32, 8, uint8_t, mac_addr[3]); \ + MC_CMD_OP(cmd, 0, 40, 8, uint8_t, mac_addr[2]); \ + MC_CMD_OP(cmd, 0, 48, 8, uint8_t, mac_addr[1]); \ + MC_CMD_OP(cmd, 0, 56, 8, uint8_t, mac_addr[0]); \ +} while (0) + +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_CMD_SET_TX_FLOW(cmd, flow_id, cfg) \ +do { \ + MC_CMD_OP(cmd, 0, 0, 32, int, \ + cfg->conf_err_cfg.queue_cfg.dest_cfg.dest_id);\ + MC_CMD_OP(cmd, 0, 32, 8, uint8_t, \ + cfg->conf_err_cfg.queue_cfg.dest_cfg.priority);\ + MC_CMD_OP(cmd, 0, 40, 2, enum dpni_dest, \ + cfg->conf_err_cfg.queue_cfg.dest_cfg.dest_type);\ + MC_CMD_OP(cmd, 0, 42, 1, int, cfg->conf_err_cfg.errors_only);\ + MC_CMD_OP(cmd, 0, 43, 1, int, cfg->l3_chksum_gen);\ + MC_CMD_OP(cmd, 0, 44, 1, int, cfg->l4_chksum_gen);\ + MC_CMD_OP(cmd, 0, 45, 1, int, \ + cfg->conf_err_cfg.use_default_queue);\ + MC_CMD_OP(cmd, 0, 48, 16, uint16_t, flow_id);\ + MC_CMD_OP(cmd, 1, 0, 64, uint64_t, \ + cfg->conf_err_cfg.queue_cfg.user_ctx);\ + MC_CMD_OP(cmd, 2, 0, 32, uint32_t, cfg->options);\ + MC_CMD_OP(cmd, 2, 32, 32, uint32_t, \ + cfg->conf_err_cfg.queue_cfg.options);\ +} while (0) + +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_RSP_SET_TX_FLOW(cmd, flow_id) \ + MC_RSP_OP(cmd, 0, 48, 16, uint16_t, flow_id) + +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_CMD_GET_TX_FLOW(cmd, flow_id) \ + MC_CMD_OP(cmd, 0, 48, 16, uint16_t, flow_id) + +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_RSP_GET_TX_FLOW(cmd, attr) \ +do { \ + MC_RSP_OP(cmd, 0, 0, 32, int, \ + attr->conf_err_attr.queue_attr.dest_cfg.dest_id);\ + MC_RSP_OP(cmd, 0, 32, 8, uint8_t, \ + attr->conf_err_attr.queue_attr.dest_cfg.priority);\ + MC_RSP_OP(cmd, 0, 40, 2, enum dpni_dest, \ + attr->conf_err_attr.queue_attr.dest_cfg.dest_type);\ + MC_RSP_OP(cmd, 0, 42, 1, int, attr->conf_err_attr.errors_only);\ + MC_RSP_OP(cmd, 0, 43, 1, int, attr->l3_chksum_gen);\ + MC_RSP_OP(cmd, 0, 44, 1, int, attr->l4_chksum_gen);\ + MC_RSP_OP(cmd, 0, 45, 1, int, \ + attr->conf_err_attr.use_default_queue);\ + MC_RSP_OP(cmd, 1, 0, 64, uint64_t, \ + attr->conf_err_attr.queue_attr.user_ctx);\ + MC_RSP_OP(cmd, 2, 32, 32, uint32_t, \ + attr->conf_err_attr.queue_attr.fqid);\ +} while (0) + +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_CMD_SET_RX_FLOW(cmd, tc_id, flow_id, cfg) \ +do { \ + MC_CMD_OP(cmd, 0, 0, 32, int, cfg->dest_cfg.dest_id); \ + MC_CMD_OP(cmd, 0, 32, 8, uint8_t, cfg->dest_cfg.priority);\ + MC_CMD_OP(cmd, 0, 40, 2, enum dpni_dest, cfg->dest_cfg.dest_type);\ + MC_CMD_OP(cmd, 0, 48, 16, uint16_t, flow_id); \ + MC_CMD_OP(cmd, 1, 0, 64, uint64_t, cfg->user_ctx); \ + MC_CMD_OP(cmd, 2, 16, 8, uint8_t, tc_id); \ + MC_CMD_OP(cmd, 2, 32, 32, uint32_t, cfg->options); \ +} while (0) + +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_CMD_GET_RX_FLOW(cmd, tc_id, flow_id) \ +do { \ + MC_CMD_OP(cmd, 0, 16, 8, uint8_t, tc_id); \ + MC_CMD_OP(cmd, 0, 48, 16, uint16_t, flow_id); \ +} while (0) + +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_RSP_GET_RX_FLOW(cmd, attr) \ +do { \ + MC_RSP_OP(cmd, 0, 0, 32, int, attr->dest_cfg.dest_id); \ + MC_RSP_OP(cmd, 0, 32, 8, uint8_t, attr->dest_cfg.priority);\ + MC_RSP_OP(cmd, 0, 40, 2, enum dpni_dest, attr->dest_cfg.dest_type); \ + MC_RSP_OP(cmd, 1, 0, 64, uint64_t, attr->user_ctx); \ + MC_RSP_OP(cmd, 2, 32, 32, uint32_t, attr->fqid); \ +} while (0) + +enum net_prot { + NET_PROT_NONE = 0, + NET_PROT_PAYLOAD, + NET_PROT_ETH, + NET_PROT_VLAN, + NET_PROT_IPV4, + NET_PROT_IPV6, + NET_PROT_IP, + NET_PROT_TCP, + NET_PROT_UDP, + NET_PROT_UDP_LITE, + NET_PROT_IPHC, + NET_PROT_SCTP, + NET_PROT_SCTP_CHUNK_DATA, + NET_PROT_PPPOE, + NET_PROT_PPP, + NET_PROT_PPPMUX, + NET_PROT_PPPMUX_SUBFRM, + NET_PROT_L2TPV2, + NET_PROT_L2TPV3_CTRL, + NET_PROT_L2TPV3_SESS, + NET_PROT_LLC, + NET_PROT_LLC_SNAP, + NET_PROT_NLPID, + NET_PROT_SNAP, + NET_PROT_MPLS, + NET_PROT_IPSEC_AH, + NET_PROT_IPSEC_ESP, + NET_PROT_UDP_ENC_ESP, /* RFC 3948 */ + NET_PROT_MACSEC, + NET_PROT_GRE, + NET_PROT_MINENCAP, + NET_PROT_DCCP, + NET_PROT_ICMP, + NET_PROT_IGMP, + NET_PROT_ARP, + NET_PROT_CAPWAP_DATA, + NET_PROT_CAPWAP_CTRL, + NET_PROT_RFC2684, + NET_PROT_ICMPV6, + NET_PROT_FCOE, + NET_PROT_FIP, + NET_PROT_ISCSI, + NET_PROT_GTP, + NET_PROT_USER_DEFINED_L2, + NET_PROT_USER_DEFINED_L3, + NET_PROT_USER_DEFINED_L4, + NET_PROT_USER_DEFINED_L5, + NET_PROT_USER_DEFINED_SHIM1, + NET_PROT_USER_DEFINED_SHIM2, + + NET_PROT_DUMMY_LAST +}; + +/* Data Path Network Interface API + * Contains initialization APIs and runtime control APIs for DPNI + */ + +struct fsl_mc_io; + +/* General DPNI macros */ + +/* Maximum number of traffic classes */ +#define DPNI_MAX_TC 8 +/* Maximum number of buffer pools per DPNI */ +#define DPNI_MAX_DPBP 8 + +/* All traffic classes considered; see dpni_set_rx_flow() */ +#define DPNI_ALL_TCS (uint8_t)(-1) +/* All flows within traffic class considered; see dpni_set_rx_flow() */ +#define DPNI_ALL_TC_FLOWS (uint16_t)(-1) +/* Generate new flow ID; see dpni_set_tx_flow() */ +#define DPNI_NEW_FLOW_ID (uint16_t)(-1) + +/** + * dpni_open() - Open a control session for the specified object + * @mc_io: Pointer to MC portal's I/O object + * @dpni_id: DPNI unique ID + * @token: Returned token; use in subsequent API calls + * + * This function can be used to open a control session for an + * already created object; an object may have been declared in + * the DPL or by calling the dpni_create() function. + * This function returns a unique authentication token, + * associated with the specific object ID and the specific MC + * portal; this token must be used in all subsequent commands for + * this specific object. + * + * Return: '0' on Success; Error code otherwise. + */ +int dpni_open(struct fsl_mc_io *mc_io, int dpni_id, uint16_t *token); + +/** + * dpni_close() - Close the control session of the object + * @mc_io: Pointer to MC portal's I/O object + * @token: Token of DPNI object + * + * After this function is called, no further operations are + * allowed on the object without opening a new control session. + * + * Return: '0' on Success; Error code otherwise. + */ +int dpni_close(struct fsl_mc_io *mc_io, uint16_t token); + +/** + * struct dpni_ipr_cfg - Structure representing IP reassembly configuration + * @max_reass_frm_size: Maximum size of the reassembled frame + * @min_frag_size_ipv4: Minimum fragment size of IPv4 fragments + * @min_frag_size_ipv6: Minimum fragment size of IPv6 fragments + * @max_open_frames_ipv4: Maximum concurrent IPv4 packets in reassembly process + * @max_open_frames_ipv6: Maximum concurrent IPv6 packets in reassembly process + */ +struct dpni_ipr_cfg { + uint16_t max_reass_frm_size; + uint16_t min_frag_size_ipv4; + uint16_t min_frag_size_ipv6; + uint16_t max_open_frames_ipv4; + uint16_t max_open_frames_ipv6; +}; + +/** + * struct dpni_pools_cfg - Structure representing buffer pools configuration + * @num_dpbp: Number of DPBPs + * @pools: Array of buffer pools parameters; The number of valid entries + * must match 'num_dpbp' value + */ +struct dpni_pools_cfg { + uint8_t num_dpbp; + /** + * struct pools - Buffer pools parameters + * @dpbp_id: DPBP object ID + * @buffer_size: Buffer size + */ + struct { + int dpbp_id; + uint16_t buffer_size; + } pools[DPNI_MAX_DPBP]; +}; + +/** + * dpni_set_pools() - Set buffer pools configuration + * @mc_io: Pointer to MC portal's I/O object + * @token: Token of DPNI object + * @cfg: Buffer pools configuration + * + * mandatory for DPNI operation + * warning:Allowed only when DPNI is disabled + * + * Return: '0' on Success; Error code otherwise. + */ +int dpni_set_pools(struct fsl_mc_io *mc_io, + uint16_t token, + const struct dpni_pools_cfg *cfg); + +/** + * dpni_enable() - Enable the DPNI, allow sending and receiving frames. + * @mc_io: Pointer to MC portal's I/O object + * @token: Token of DPNI object + * + * Return: '0' on Success; Error code otherwise. + */ +int dpni_enable(struct fsl_mc_io *mc_io, uint16_t token); + +/** + * dpni_disable() - Disable the DPNI, stop sending and receiving frames. + * @mc_io: Pointer to MC portal's I/O object + * @token: Token of DPNI object + * + * Return: '0' on Success; Error code otherwise. + */ +int dpni_disable(struct fsl_mc_io *mc_io, uint16_t token); + + +/** + * @dpni_reset() - Reset the DPNI, returns the object to initial state. + * @mc_io: Pointer to MC portal's I/O object + * @token: Token of DPNI object + * + * Return: '0' on Success; Error code otherwise. + */ +int dpni_reset(struct fsl_mc_io *mc_io, uint16_t token); + +/** + * struct dpni_attr - Structure representing DPNI attributes + * @id: DPNI object ID + * @version: DPNI version + * @start_hdr: Indicates the packet starting header for parsing + * @options: Mask of available options; reflects the value as was given in + * object's creation + * @max_senders: Maximum number of different senders; used as the number + * of dedicated Tx flows; + * @max_tcs: Maximum number of traffic classes (for both Tx and Rx) + * @max_dist_per_tc: Maximum distribution size per Rx traffic class; + * Set to the required value minus 1 + * @max_unicast_filters: Maximum number of unicast filters + * @max_multicast_filters: Maximum number of multicast filters + * @max_vlan_filters: Maximum number of VLAN filters + * @max_qos_entries: if 'max_tcs > 1', declares the maximum entries in QoS table + * @max_qos_key_size: Maximum key size for the QoS look-up + * @max_dist_key_size: Maximum key size for the distribution look-up + * @ipr_cfg: IP reassembly configuration + */ +struct dpni_attr { + int id; + /** + * struct version - DPNI version + * @major: DPNI major version + * @minor: DPNI minor version + */ + struct { + uint16_t major; + uint16_t minor; + } version; + enum net_prot start_hdr; + uint64_t options; + uint8_t max_senders; + uint8_t max_tcs; + uint8_t max_dist_per_tc[DPNI_MAX_TC]; + uint8_t max_unicast_filters; + uint8_t max_multicast_filters; + uint8_t max_vlan_filters; + uint8_t max_qos_entries; + uint8_t max_qos_key_size; + uint8_t max_dist_key_size; + struct dpni_ipr_cfg ipr_cfg; +}; +/** + * dpni_get_attributes() - Retrieve DPNI attributes. + * @mc_io: Pointer to MC portal's I/O objec + * @token: Token of DPNI object + * @attr: Returned object's attributes + * + * Return: '0' on Success; Error code otherwise. + */ +int dpni_get_attributes(struct fsl_mc_io *mc_io, + uint16_t token, + struct dpni_attr *attr); + +/* DPNI buffer layout modification options */ + +/* Select to modify the time-stamp setting */ +#define DPNI_BUF_LAYOUT_OPT_TIMESTAMP 0x00000001 +/* Select to modify the parser-result setting; not applicable for Tx */ +#define DPNI_BUF_LAYOUT_OPT_PARSER_RESULT 0x00000002 +/* Select to modify the frame-status setting */ +#define DPNI_BUF_LAYOUT_OPT_FRAME_STATUS 0x00000004 +/* Select to modify the private-data-size setting */ +#define DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE 0x00000008 +/* Select to modify the data-alignment setting */ +#define DPNI_BUF_LAYOUT_OPT_DATA_ALIGN 0x00000010 +/* Select to modify the data-head-room setting */ +#define DPNI_BUF_LAYOUT_OPT_DATA_HEAD_ROOM 0x00000020 +/*!< Select to modify the data-tail-room setting */ +#define DPNI_BUF_LAYOUT_OPT_DATA_TAIL_ROOM 0x00000040 + +/** + * struct dpni_buffer_layout - Structure representing DPNI buffer layout + * @options: Flags representing the suggested modifications to the buffer + * layout; Use any combination of 'DPNI_BUF_LAYOUT_OPT_<X>' flags + * @pass_timestamp: Pass timestamp value + * @pass_parser_result: Pass parser results + * @pass_frame_status: Pass frame status + * @private_data_size: Size kept for private data (in bytes) + * @data_align: Data alignment + * @data_head_room: Data head room + * @data_tail_room: Data tail room + */ +struct dpni_buffer_layout { + uint32_t options; + int pass_timestamp; + int pass_parser_result; + int pass_frame_status; + uint16_t private_data_size; + uint16_t data_align; + uint16_t data_head_room; + uint16_t data_tail_room; +}; + +/** + * dpni_get_rx_buffer_layout() - Retrieve Rx buffer layout attributes. + * @mc_io: Pointer to MC portal's I/O object + * @token: Token of DPNI object + * @layout: Returns buffer layout attributes + * + * Return: '0' on Success; Error code otherwise. + */ +int dpni_get_rx_buffer_layout(struct fsl_mc_io *mc_io, + uint16_t token, + struct dpni_buffer_layout *layout); +/** + * dpni_set_rx_buffer_layout() - Set Rx buffer layout configuration. + * @mc_io: Pointer to MC portal's I/O object + * @token: Token of DPNI object + * @layout: Buffer layout configuration + * + * Return: '0' on Success; Error code otherwise. + * + * @warning Allowed only when DPNI is disabled + */ +int dpni_set_rx_buffer_layout(struct fsl_mc_io *mc_io, + uint16_t token, + const struct dpni_buffer_layout *layout); + +/** + * dpni_get_tx_buffer_layout() - Retrieve Tx buffer layout attributes. + * @mc_io: Pointer to MC portal's I/O object + * @token: Token of DPNI object + * @layout: Returns buffer layout attributes + * + * Return: '0' on Success; Error code otherwise. + */ +int dpni_get_tx_buffer_layout(struct fsl_mc_io *mc_io, + uint16_t token, + struct dpni_buffer_layout *layout); + +/** + * @brief Set Tx buffer layout configuration. + * + * @param[in] mc_io Pointer to MC portal's I/O object + * @param[in] token Token of DPNI object + * @param[in] layout Buffer layout configuration + * + * @returns '0' on Success; Error code otherwise. + * + * @warning Allowed only when DPNI is disabled + */ +int dpni_set_tx_buffer_layout(struct fsl_mc_io *mc_io, + uint16_t token, + const struct dpni_buffer_layout *layout); +/** + * dpni_get_tx_conf_buffer_layout() - Retrieve Tx confirmation buffer layout + * attributes. + * @mc_io: Pointer to MC portal's I/O object + * @token: Token of DPNI object + * @layout: Returns buffer layout attributes + * + * Return: '0' on Success; Error code otherwise. + */ +int dpni_get_tx_conf_buffer_layout(struct fsl_mc_io *mc_io, + uint16_t token, + struct dpni_buffer_layout *layout); +/** + * dpni_set_tx_conf_buffer_layout() - Set Tx confirmation buffer layout + * configuration. + * @mc_io: Pointer to MC portal's I/O object + * @token: Token of DPNI object + * @layout: Buffer layout configuration + * + * Return: '0' on Success; Error code otherwise. + * + * @warning Allowed only when DPNI is disabled + */ +int dpni_set_tx_conf_buffer_layout(struct fsl_mc_io *mc_io, + uint16_t token, + const struct dpni_buffer_layout *layout); +/** + * dpni_get_spid() - Get the AIOP storage profile ID associated with the DPNI + * @mc_io: Pointer to MC portal's I/O object + * @token: Token of DPNI object + * @spid: Returned aiop storage-profile ID + * + * Return: '0' on Success; Error code otherwise. + * + * @warning Only relevant for DPNI that belongs to AIOP container. + */ +int dpni_get_qdid(struct fsl_mc_io *mc_io, uint16_t token, uint16_t *qdid); + +/** + * dpni_get_tx_data_offset() - Get the Tx data offset (from start of buffer) + * @mc_io: Pointer to MC portal's I/O object + * @token: Token of DPNI object + * @data_offset: Tx data offset (from start of buffer) + * + * Return: '0' on Success; Error code otherwise. + */ +int dpni_get_tx_data_offset(struct fsl_mc_io *mc_io, + uint16_t token, + uint16_t *data_offset); + +/** + * enum dpni_counter - DPNI counter types + * @DPNI_CNT_ING_FRAME: Counts ingress frames + * @DPNI_CNT_ING_BYTE: Counts ingress bytes + * @DPNI_CNT_ING_FRAME_DROP: Counts ingress frames dropped due to explicit + * 'drop' setting + * @DPNI_CNT_ING_FRAME_DISCARD: Counts ingress frames discarded due to errors + * @DPNI_CNT_ING_MCAST_FRAME: Counts ingress multicast frames + * @DPNI_CNT_ING_MCAST_BYTE: Counts ingress multicast bytes + * @DPNI_CNT_ING_BCAST_FRAME: Counts ingress broadcast frames + * @DPNI_CNT_ING_BCAST_BYTES: Counts ingress broadcast bytes + * @DPNI_CNT_EGR_FRAME: Counts egress frames + * @DPNI_CNT_EGR_BYTE: Counts egress bytes + * @DPNI_CNT_EGR_FRAME_DISCARD: Counts egress frames discarded due to errors + */ +enum dpni_counter { + DPNI_CNT_ING_FRAME = 0x0, + DPNI_CNT_ING_BYTE = 0x1, + DPNI_CNT_ING_FRAME_DROP = 0x2, + DPNI_CNT_ING_FRAME_DISCARD = 0x3, + DPNI_CNT_ING_MCAST_FRAME = 0x4, + DPNI_CNT_ING_MCAST_BYTE = 0x5, + DPNI_CNT_ING_BCAST_FRAME = 0x6, + DPNI_CNT_ING_BCAST_BYTES = 0x7, + DPNI_CNT_EGR_FRAME = 0x8, + DPNI_CNT_EGR_BYTE = 0x9, + DPNI_CNT_EGR_FRAME_DISCARD = 0xa +}; + +/** + * dpni_get_counter() - Read a specific DPNI counter + * @mc_io: Pointer to MC portal's I/O object + * @token: Token of DPNI object + * @counter: The requested counter + * @value: Returned counter's current value + * + * Return: '0' on Success; Error code otherwise. + */ +int dpni_get_counter(struct fsl_mc_io *mc_io, + uint16_t token, + enum dpni_counter counter, + uint64_t *value); + +/** + * dpni_set_counter() - Set (or clear) a specific DPNI counter + * @mc_io: Pointer to MC portal's I/O object + * @token: Token of DPNI object + * @counter: The requested counter + * @value: New counter value; typically pass '0' for resetting + * the counter. + * + * Return: '0' on Success; Error code otherwise. + */ +int dpni_set_counter(struct fsl_mc_io *mc_io, + uint16_t token, + enum dpni_counter counter, + uint64_t value); +/** + * struct - Structure representing DPNI link configuration + * @rate: Rate + * @options: Mask of available options; use 'DPNI_LINK_OPT_<X>' values + */ +struct dpni_link_cfg { + uint64_t rate; + uint64_t options; +}; + +/** + * dpni_set_link_cfg() - set the link configuration. + * @mc_io: Pointer to MC portal's I/O object + * @token: Token of DPNI object + * @cfg: Link configuration + * + * Return: '0' on Success; Error code otherwise. + */ +int dpni_set_link_cfg(struct fsl_mc_io *mc_io, + uint16_t token, + struct dpni_link_cfg *cfg); + +/** + * struct dpni_link_state - Structure representing DPNI link state + * @rate: Rate + * @options: Mask of available options; use 'DPNI_LINK_OPT_<X>' values + * @up: Link state; '0' for down, '1' for up + */ +struct dpni_link_state { + uint64_t rate; + uint64_t options; + int up; +}; + +/** + * dpni_get_link_state() - Return the link state (either up or down) + * @mc_io: Pointer to MC portal's I/O object + * @token: Token of DPNI object + * @state: Returned link state; + * + * Return: '0' on Success; Error code otherwise. + */ +int dpni_get_link_state(struct fsl_mc_io *mc_io, + uint16_t token, + struct dpni_link_state *state); + +/** + * dpni_set_primary_mac_addr() - Set the primary MAC address + * @mc_io: Pointer to MC portal's I/O object + * @token: Token of DPNI object + * @mac_addr: MAC address to set as primary address + * + * Return: '0' on Success; Error code otherwise. + */ +int dpni_set_primary_mac_addr(struct fsl_mc_io *mc_io, + uint16_t token, + const uint8_t mac_addr[6]); +/** + * dpni_get_primary_mac_addr() - Get the primary MAC address + * @mc_io: Pointer to MC portal's I/O object + * @token: Token of DPNI object + * @mac_addr: Returned MAC address + * + * Return: '0' on Success; Error code otherwise. + */ +int dpni_get_primary_mac_addr(struct fsl_mc_io *mc_io, + uint16_t token, + uint8_t mac_addr[6]); +/** + * dpni_add_mac_addr() - Add MAC address filter + * @mc_io: Pointer to MC portal's I/O object + * @token: Token of DPNI object + * @mac_addr: MAC address to add + * + * Return: '0' on Success; Error code otherwise. + */ +int dpni_add_mac_addr(struct fsl_mc_io *mc_io, + uint16_t token, + const uint8_t mac_addr[6]); + +/** + * dpni_remove_mac_addr() - Remove MAC address filter + * @mc_io: Pointer to MC portal's I/O object + * @token: Token of DPNI object + * @mac_addr: MAC address to remove + * + * Return: '0' on Success; Error code otherwise. + */ +int dpni_remove_mac_addr(struct fsl_mc_io *mc_io, + uint16_t token, + const uint8_t mac_addr[6]); + +/** + * enum dpni_dest - DPNI destination types + * DPNI_DEST_NONE: Unassigned destination; The queue is set in parked mode and + * does not generate FQDAN notifications; user is expected to + * dequeue from the queue based on polling or other user-defined + * method + * @DPNI_DEST_DPIO: The queue is set in schedule mode and generates FQDAN + * notifications to the specified DPIO; user is expected to dequeue + * from the queue only after notification is received + * @DPNI_DEST_DPCON: The queue is set in schedule mode and does not generate + * FQDAN notifications, but is connected to the specified DPCON + * object; user is expected to dequeue from the DPCON channel + */ +enum dpni_dest { + DPNI_DEST_NONE = 0, + DPNI_DEST_DPIO = 1, + DPNI_DEST_DPCON = 2 +}; + +/** + * struct dpni_dest_cfg - Structure representing DPNI destination parameters + * @dest_type: Destination type + * @dest_id: Either DPIO ID or DPCON ID, depending on the destination type + * @priority: Priority selection within the DPIO or DPCON channel; valid values + * are 0-1 or 0-7, depending on the number of priorities in that + * channel; not relevant for 'DPNI_DEST_NONE' option + */ +struct dpni_dest_cfg { + enum dpni_dest dest_type; + int dest_id; + uint8_t priority; +}; + +/* DPNI queue modification options */ + +/* Select to modify the user's context associated with the queue */ +#define DPNI_QUEUE_OPT_USER_CTX 0x00000001 +/* Select to modify the queue's destination */ +#define DPNI_QUEUE_OPT_DEST 0x00000002 + +/** + * struct dpni_queue_cfg - Structure representing queue configuration + * @options: Flags representing the suggested modifications to the queue; + * Use any combination of 'DPNI_QUEUE_OPT_<X>' flags + * @user_ctx: User context value provided in the frame descriptor of each + * dequeued frame; valid only if 'DPNI_QUEUE_OPT_USER_CTX' + * is contained in 'options' + * @dest_cfg: Queue destination parameters; + * valid only if 'DPNI_QUEUE_OPT_DEST' is contained in 'options' + */ +struct dpni_queue_cfg { + uint32_t options; + uint64_t user_ctx; + struct dpni_dest_cfg dest_cfg; +}; + +/** + * struct dpni_queue_attr - Structure representing queue attributes + * @user_ctx: User context value provided in the frame descriptor of each + * dequeued frame + * @dest_cfg: Queue destination configuration + * @fqid: Virtual fqid value to be used for dequeue operations + */ +struct dpni_queue_attr { + uint64_t user_ctx; + struct dpni_dest_cfg dest_cfg; + uint32_t fqid; +}; + +/* DPNI Tx flow modification options */ + +/* Select to modify the settings for dedicate Tx confirmation/error */ +#define DPNI_TX_FLOW_OPT_TX_CONF_ERROR 0x00000001 +/*!< Select to modify the Tx confirmation and/or error setting */ +#define DPNI_TX_FLOW_OPT_ONLY_TX_ERROR 0x00000002 +/*!< Select to modify the queue configuration */ +#define DPNI_TX_FLOW_OPT_QUEUE 0x00000004 +/*!< Select to modify the L3 checksum generation setting */ +#define DPNI_TX_FLOW_OPT_L3_CHKSUM_GEN 0x00000010 +/*!< Select to modify the L4 checksum generation setting */ +#define DPNI_TX_FLOW_OPT_L4_CHKSUM_GEN 0x00000020 + +/** + * struct dpni_tx_flow_cfg - Structure representing Tx flow configuration + * @options: Flags representing the suggested modifications to the Tx flow; + * Use any combination 'DPNI_TX_FLOW_OPT_<X>' flags + * @conf_err_cfg: Tx confirmation and error configuration; these settings are + * ignored if 'DPNI_OPT_PRIVATE_TX_CONF_ERROR_DISABLED' was set at + * DPNI creation + * @l3_chksum_gen: Set to '1' to enable L3 checksum generation; '0' to disable; + * valid only if 'DPNI_TX_FLOW_OPT_L3_CHKSUM_GEN' is contained in + * 'options' + * @l4_chksum_gen: Set to '1' to enable L4 checksum generation; '0' to disable; + * valid only if 'DPNI_TX_FLOW_OPT_L4_CHKSUM_GEN' is contained in + * 'options' + */ +struct dpni_tx_flow_cfg { + uint32_t options; + /** + * struct cnf_err_cfg - Tx confirmation and error configuration + * @use_default_queue: Set to '1' to use the common (default) Tx + * confirmation and error queue; Set to '0' to use the + * private Tx confirmation and error queue; valid only if + * 'DPNI_TX_FLOW_OPT_TX_CONF_ERROR' is contained in + * 'options' + * @errors_only: Set to '1' to report back only error frames; + * Set to '0' to confirm transmission/error for all + * transmitted frames; + * valid only if 'DPNI_TX_FLOW_OPT_ONLY_TX_ERROR' is + * contained in 'options' and 'use_default_queue = 0'; + * @queue_cfg: Queue configuration; valid only if + * 'DPNI_TX_FLOW_OPT_QUEUE' is contained in 'options' + */ + struct { + int use_default_queue; + int errors_only; + struct dpni_queue_cfg queue_cfg; + } conf_err_cfg; + int l3_chksum_gen; + int l4_chksum_gen; +}; + +/** + * dpni_set_tx_flow() - Set Tx flow configuration + * @mc_io: Pointer to MC portal's I/O object + * @token: Token of DPNI object + * @flow_id: Provides (or returns) the sender's flow ID; + * for each new sender set (*flow_id) to + * 'DPNI_NEW_FLOW_ID' to generate a new flow_id; + * this ID should be used as the QDBIN argument + * in enqueue operations + * @cfg: Tx flow configuration + * + * Return: '0' on Success; Error code otherwise. + */ +int dpni_set_tx_flow(struct fsl_mc_io *mc_io, + uint16_t token, + uint16_t *flow_id, + const struct dpni_tx_flow_cfg *cfg); + +/** + * struct dpni_tx_flow_attr - Structure representing Tx flow attributes + * @conf_err_attr: Tx confirmation and error attributes + * @l3_chksum_gen: '1' if L3 checksum generation is enabled; '0' if disabled + * @l4_chksum_gen: '1' if L4 checksum generation is enabled; '0' if disabled + */ +struct dpni_tx_flow_attr { + /** + * struct conf_err_attr - Tx confirmation and error attributes + * @use_default_queue: '1' if using common (default) Tx confirmation and + * error queue; + * '0' if using private Tx confirmation and error + * queue + * @errors_only: '1' if only error frames are reported back; '0' if all + * transmitted frames are confirmed + * @queue_attr: Queue attributes + */ + struct { + int use_default_queue; + int errors_only; + struct dpni_queue_attr queue_attr; + } conf_err_attr; + int l3_chksum_gen; + int l4_chksum_gen; +}; + +/** + * dpni_get_tx_flow() - Get Tx flow attributes + * @mc_io: Pointer to MC portal's I/O object + * @token: Token of DPNI object + * @flow_id: The sender's flow ID, as returned by the + * dpni_set_tx_flow() function + * @attr: Returned Tx flow attributes + * + * Return: '0' on Success; Error code otherwise. + */ +int dpni_get_tx_flow(struct fsl_mc_io *mc_io, + uint16_t token, + uint16_t flow_id, + struct dpni_tx_flow_attr *attr); + +/** + * dpni_set_rx_flow() - Set Rx flow configuration + * @mc_io: Pointer to MC portal's I/O object + * @token: Token of DPNI object + * @tc_id: Traffic class selection (0-7); + * use 'DPNI_ALL_TCS' to set all TCs and all flows + * @flow_id Rx flow id within the traffic class; use + * 'DPNI_ALL_TC_FLOWS' to set all flows within + * this tc_id; ignored if tc_id is set to + * 'DPNI_ALL_TCS'; + * @cfg: Rx flow configuration + * + * Return: '0' on Success; Error code otherwise. + */ +int dpni_set_rx_flow(struct fsl_mc_io *mc_io, + uint16_t token, + uint8_t tc_id, + uint16_t flow_id, + const struct dpni_queue_cfg *cfg); + +/** + * dpni_get_rx_flow() - Get Rx flow attributes + * @mc_io: Pointer to MC portal's I/O object + * @token: Token of DPNI object + * @tc_id: Traffic class selection (0-7) + * @flow_id: Rx flow id within the traffic class + * @attr: Returned Rx flow attributes + * + * Return: '0' on Success; Error code otherwise. + */ +int dpni_get_rx_flow(struct fsl_mc_io *mc_io, + uint16_t token, + uint8_t tc_id, + uint16_t flow_id, + struct dpni_queue_attr *attr); + +#endif /* _FSL_DPNI_H */ |