diff options
Diffstat (limited to 'include/fsl_nfc.h')
-rw-r--r-- | include/fsl_nfc.h | 86 |
1 files changed, 74 insertions, 12 deletions
diff --git a/include/fsl_nfc.h b/include/fsl_nfc.h index da5be379d1..279aaa55de 100644 --- a/include/fsl_nfc.h +++ b/include/fsl_nfc.h @@ -1,5 +1,4 @@ /* - * * (c) 2009 Magnus Lilja <lilja.magnus@gmail.com> * * See file CREDITS for list of people who contributed to this @@ -25,21 +24,57 @@ #define __FSL_NFC_H /* + * TODO: Use same register defs for nand_spl mxc nand driver + * and mtd mxc nand driver. + * * Register map and bit definitions for the Freescale NAND Flash - * Controller present in i.MX31 and other devices. + * Controller present in various i.MX devices. + * + * MX31 and MX27 have version 1 which has + * 4 512 byte main buffers and + * 4 16 byte spare buffers + * to support up to 2K byte pagesize nand. + * Reading or writing a 2K page requires 4 FDI/FDO cycles. + * + * MX25 has version 1.1 which has + * 8 512 byte main buffers and + * 8 64 byte spare buffers + * to support up to 4K byte pagesize nand. + * Reading or writing a 2K or 4K page requires only 1 FDI/FDO cycle. + * Also some of registers are moved and/or changed meaning as seen below. */ +#if defined(CONFIG_MX31) || defined(CONFIG_MX27) +#define MXC_NFC_V1 +#elif defined(CONFIG_MX25) +#define MXC_NFC_V1_1 +#else +#warning "MXC NFC version not defined" +#endif + +#if defined(MXC_NFC_V1) +#define NAND_MXC_NR_BUFS 4 +#define NAND_MXC_SPARE_BUF_SIZE 16 +#define NAND_MXC_REG_OFFSET 0xe00 +#define NAND_MXC_2K_MULTI_CYCLE 1 +#elif defined(MXC_NFC_V1_1) +#define NAND_MXC_NR_BUFS 8 +#define NAND_MXC_SPARE_BUF_SIZE 64 +#define NAND_MXC_REG_OFFSET 0x1e00 +#else +#error "define CONFIG_NAND_MXC_VXXX to use the mxc spl_nand driver" +#endif struct fsl_nfc_regs { - u32 main_area0[128]; /* @0x000 */ - u32 main_area1[128]; - u32 main_area2[128]; - u32 main_area3[128]; - u32 spare_area0[4]; - u32 spare_area1[4]; - u32 spare_area2[4]; - u32 spare_area3[4]; - u32 reserved1[64 - 16 + 64 * 5]; - u16 bufsiz; /* @ 0xe00 */ + u32 main_area[NAND_MXC_NR_BUFS][512/4]; + u32 spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE/4]; + /* + * reserved size is offset of nfc registers + * minus total main and spare sizes + */ + u8 reserved1[NAND_MXC_REG_OFFSET + - NAND_MXC_NR_BUFS * (512 + NAND_MXC_SPARE_BUF_SIZE)]; +#if defined(MXC_NFC_V1) + u16 bufsiz; u16 reserved2; u16 buffer_address; u16 flash_add; @@ -54,6 +89,30 @@ struct fsl_nfc_regs { u16 nand_flash_wr_pr_st; u16 nand_flash_config1; u16 nand_flash_config2; +#elif defined(MXC_NFC_V1_1) + u16 reserved2[2]; + u16 buffer_address; + u16 flash_add; + u16 flash_cmd; + u16 configuration; + u16 ecc_status_result; + u16 ecc_status_result2; + u16 spare_area_size; + u16 nf_wr_prot; + u16 reserved3[2]; + u16 nand_flash_wr_pr_st; + u16 nand_flash_config1; + u16 nand_flash_config2; + u16 reserved4; + u16 unlock_start_blk_add0; + u16 unlock_end_blk_add0; + u16 unlock_start_blk_add1; + u16 unlock_end_blk_add1; + u16 unlock_start_blk_add2; + u16 unlock_end_blk_add2; + u16 unlock_start_blk_add3; + u16 unlock_end_blk_add3; +#endif }; /* @@ -98,6 +157,9 @@ struct fsl_nfc_regs { */ #define NFC_INT 0x8000 +#ifdef MXC_NFC_V1_1 +#define NFC_4_8N_ECC (1 << 0) +#endif #define NFC_SP_EN (1 << 2) #define NFC_ECC_EN (1 << 3) #define NFC_INT_MSK (1 << 4) |