diff options
Diffstat (limited to 'include/lcd.h')
| -rw-r--r-- | include/lcd.h | 201 |
1 files changed, 5 insertions, 196 deletions
diff --git a/include/lcd.h b/include/lcd.h index 160f940d2a..fbba6a27f9 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -41,205 +41,15 @@ int bmp_display(ulong addr, int x, int y); void lcd_set_flush_dcache(int flush); #if defined CONFIG_MPC823 -/* - * LCD controller stucture for MPC823 CPU - */ -typedef struct vidinfo { - ushort vl_col; /* Number of columns (i.e. 640) */ - ushort vl_row; /* Number of rows (i.e. 480) */ - ushort vl_width; /* Width of display area in millimeters */ - ushort vl_height; /* Height of display area in millimeters */ - - /* LCD configuration register */ - u_char vl_clkp; /* Clock polarity */ - u_char vl_oep; /* Output Enable polarity */ - u_char vl_hsp; /* Horizontal Sync polarity */ - u_char vl_vsp; /* Vertical Sync polarity */ - u_char vl_dp; /* Data polarity */ - u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */ - u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */ - u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */ - u_char vl_clor; /* Color, 0 = mono, 1 = color */ - u_char vl_tft; /* 0 = passive, 1 = TFT */ - - /* Horizontal control register. Timing from data sheet */ - ushort vl_wbl; /* Wait between lines */ - - /* Vertical control register */ - u_char vl_vpw; /* Vertical sync pulse width */ - u_char vl_lcdac; /* LCD AC timing */ - u_char vl_wbf; /* Wait between frames */ -} vidinfo_t; - +#include <mpc823_lcd.h> #elif defined(CONFIG_CPU_PXA25X) || defined(CONFIG_CPU_PXA27X) || \ defined CONFIG_CPU_MONAHANS -/* - * PXA LCD DMA descriptor - */ -struct pxafb_dma_descriptor { - u_long fdadr; /* Frame descriptor address register */ - u_long fsadr; /* Frame source address register */ - u_long fidr; /* Frame ID register */ - u_long ldcmd; /* Command register */ -}; - -/* - * PXA LCD info - */ -struct pxafb_info { - - /* Misc registers */ - u_long reg_lccr3; - u_long reg_lccr2; - u_long reg_lccr1; - u_long reg_lccr0; - u_long fdadr0; - u_long fdadr1; - - /* DMA descriptors */ - struct pxafb_dma_descriptor * dmadesc_fblow; - struct pxafb_dma_descriptor * dmadesc_fbhigh; - struct pxafb_dma_descriptor * dmadesc_palette; - - u_long screen; /* physical address of frame buffer */ - u_long palette; /* physical address of palette memory */ - u_int palette_size; -}; - -/* - * LCD controller stucture for PXA CPU - */ -typedef struct vidinfo { - ushort vl_col; /* Number of columns (i.e. 640) */ - ushort vl_row; /* Number of rows (i.e. 480) */ - ushort vl_width; /* Width of display area in millimeters */ - ushort vl_height; /* Height of display area in millimeters */ - - /* LCD configuration register */ - u_char vl_clkp; /* Clock polarity */ - u_char vl_oep; /* Output Enable polarity */ - u_char vl_hsp; /* Horizontal Sync polarity */ - u_char vl_vsp; /* Vertical Sync polarity */ - u_char vl_dp; /* Data polarity */ - u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */ - u_char vl_lbw; /* LCD Bus width, 0 = 4, 1 = 8 */ - u_char vl_splt; /* Split display, 0 = single-scan, 1 = dual-scan */ - u_char vl_clor; /* Color, 0 = mono, 1 = color */ - u_char vl_tft; /* 0 = passive, 1 = TFT */ - - /* Horizontal control register. Timing from data sheet */ - ushort vl_hpw; /* Horz sync pulse width */ - u_char vl_blw; /* Wait before of line */ - u_char vl_elw; /* Wait end of line */ - - /* Vertical control register. */ - u_char vl_vpw; /* Vertical sync pulse width */ - u_char vl_bfw; /* Wait before of frame */ - u_char vl_efw; /* Wait end of frame */ - - /* PXA LCD controller params */ - struct pxafb_info pxa; -} vidinfo_t; - +#include <pxa_lcd.h> #elif defined(CONFIG_ATMEL_LCD) || defined(CONFIG_ATMEL_HLCD) - -typedef struct vidinfo { - ushort vl_col; /* Number of columns (i.e. 640) */ - ushort vl_row; /* Number of rows (i.e. 480) */ - u_long vl_clk; /* pixel clock in ps */ - - /* LCD configuration register */ - u_long vl_sync; /* Horizontal / vertical sync */ - u_long vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */ - u_long vl_tft; /* 0 = passive, 1 = TFT */ - u_long vl_cont_pol_low; /* contrast polarity is low */ - u_long vl_clk_pol; /* clock polarity */ - - /* Horizontal control register. */ - u_long vl_hsync_len; /* Length of horizontal sync */ - u_long vl_left_margin; /* Time from sync to picture */ - u_long vl_right_margin; /* Time from picture to sync */ - - /* Vertical control register. */ - u_long vl_vsync_len; /* Length of vertical sync */ - u_long vl_upper_margin; /* Time from sync to picture */ - u_long vl_lower_margin; /* Time from picture to sync */ - - u_long mmio; /* Memory mapped registers */ -} vidinfo_t; - +#include <atmel_lcd.h> #elif defined(CONFIG_EXYNOS_FB) - -enum { - FIMD_RGB_INTERFACE = 1, - FIMD_CPU_INTERFACE = 2, -}; - -enum exynos_fb_rgb_mode_t { - MODE_RGB_P = 0, - MODE_BGR_P = 1, - MODE_RGB_S = 2, - MODE_BGR_S = 3, -}; - -typedef struct vidinfo { - ushort vl_col; /* Number of columns (i.e. 640) */ - ushort vl_row; /* Number of rows (i.e. 480) */ - ushort vl_width; /* Width of display area in millimeters */ - ushort vl_height; /* Height of display area in millimeters */ - - /* LCD configuration register */ - u_char vl_freq; /* Frequency */ - u_char vl_clkp; /* Clock polarity */ - u_char vl_oep; /* Output Enable polarity */ - u_char vl_hsp; /* Horizontal Sync polarity */ - u_char vl_vsp; /* Vertical Sync polarity */ - u_char vl_dp; /* Data polarity */ - u_char vl_bpix; /* Bits per pixel */ - - /* Horizontal control register. Timing from data sheet */ - u_char vl_hspw; /* Horz sync pulse width */ - u_char vl_hfpd; /* Wait before of line */ - u_char vl_hbpd; /* Wait end of line */ - - /* Vertical control register. */ - u_char vl_vspw; /* Vertical sync pulse width */ - u_char vl_vfpd; /* Wait before of frame */ - u_char vl_vbpd; /* Wait end of frame */ - u_char vl_cmd_allow_len; /* Wait end of frame */ - - unsigned int win_id; - unsigned int init_delay; - unsigned int power_on_delay; - unsigned int reset_delay; - unsigned int interface_mode; - unsigned int mipi_enabled; - unsigned int dp_enabled; - unsigned int cs_setup; - unsigned int wr_setup; - unsigned int wr_act; - unsigned int wr_hold; - unsigned int logo_on; - unsigned int logo_width; - unsigned int logo_height; - int logo_x_offset; - int logo_y_offset; - unsigned long logo_addr; - unsigned int rgb_mode; - unsigned int resolution; - - /* parent clock name(MPLL, EPLL or VPLL) */ - unsigned int pclk_name; - /* ratio value for source clock from parent clock. */ - unsigned int sclk_div; - - unsigned int dual_lcd_enabled; -} vidinfo_t; - -void init_panel_info(vidinfo_t *vid); - +#include <exynos_lcd.h> #else - typedef struct vidinfo { ushort vl_col; /* Number of columns (i.e. 160) */ ushort vl_row; /* Number of rows (i.e. 100) */ @@ -250,8 +60,7 @@ typedef struct vidinfo { void *priv; /* Pointer to driver-specific data */ } vidinfo_t; - -#endif /* CONFIG_MPC823, CONFIG_CPU_PXA25X, CONFIG_ATMEL_LCD */ +#endif extern vidinfo_t panel_info; |