diff options
Diffstat (limited to 'include/tpm.h')
| -rw-r--r-- | include/tpm.h | 197 |
1 files changed, 165 insertions, 32 deletions
diff --git a/include/tpm.h b/include/tpm.h index 6b21e9c734..7219b7319c 100644 --- a/include/tpm.h +++ b/include/tpm.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2011 The Chromium OS Authors. + * Copyright (c) 2013 The Chromium OS Authors. * * See file CREDITS for list of people who contributed to this * project. @@ -20,52 +20,185 @@ * MA 02111-1307 USA */ -#ifndef _INCLUDE_TPM_H_ -#define _INCLUDE_TPM_H_ +#ifndef __TPM_H +#define __TPM_H -#include <common.h> +#include <tis.h> /* - * tis_init() + * Here is a partial implementation of TPM commands. Please consult TCG Main + * Specification for definitions of TPM commands. + */ + +enum tpm_startup_type { + TPM_ST_CLEAR = 0x0001, + TPM_ST_STATE = 0x0002, + TPM_ST_DEACTIVATED = 0x0003, +}; + +enum tpm_physical_presence { + TPM_PHYSICAL_PRESENCE_HW_DISABLE = 0x0200, + TPM_PHYSICAL_PRESENCE_CMD_DISABLE = 0x0100, + TPM_PHYSICAL_PRESENCE_LIFETIME_LOCK = 0x0080, + TPM_PHYSICAL_PRESENCE_HW_ENABLE = 0x0040, + TPM_PHYSICAL_PRESENCE_CMD_ENABLE = 0x0020, + TPM_PHYSICAL_PRESENCE_NOTPRESENT = 0x0010, + TPM_PHYSICAL_PRESENCE_PRESENT = 0x0008, + TPM_PHYSICAL_PRESENCE_LOCK = 0x0004, +}; + +enum tpm_nv_index { + TPM_NV_INDEX_LOCK = 0xffffffff, + TPM_NV_INDEX_0 = 0x00000000, + TPM_NV_INDEX_DIR = 0x10000001, +}; + +/** + * Initialize TPM device. It must be called before any TPM commands. * - * Initialize the TPM device. Returns 0 on success or -1 on - * failure (in case device probing did not succeed). + * @return 0 on success, non-0 on error. */ -int tis_init(void); +uint32_t tpm_init(void); -/* - * tis_open() +/** + * Issue a TPM_Startup command. * - * Requests access to locality 0 for the caller. After all commands have been - * completed the caller is supposed to call tis_close(). + * @param mode TPM startup mode + * @return return code of the operation + */ +uint32_t tpm_startup(enum tpm_startup_type mode); + +/** + * Issue a TPM_SelfTestFull command. * - * Returns 0 on success, -1 on failure. + * @return return code of the operation */ -int tis_open(void); +uint32_t tpm_self_test_full(void); -/* - * tis_close() +/** + * Issue a TPM_ContinueSelfTest command. * - * terminate the currect session with the TPM by releasing the locked - * locality. Returns 0 on success of -1 on failure (in case lock - * removal did not succeed). + * @return return code of the operation */ -int tis_close(void); +uint32_t tpm_continue_self_test(void); -/* - * tis_sendrecv() +/** + * Issue a TPM_NV_DefineSpace command. The implementation is limited + * to specify TPM_NV_ATTRIBUTES and size of the area. The area index + * could be one of the special value listed in enum tpm_nv_index. * - * Send the requested data to the TPM and then try to get its response + * @param index index of the area + * @param perm TPM_NV_ATTRIBUTES of the area + * @param size size of the area + * @return return code of the operation + */ +uint32_t tpm_nv_define_space(uint32_t index, uint32_t perm, uint32_t size); + +/** + * Issue a TPM_NV_ReadValue command. This implementation is limited + * to read the area from offset 0. The area index could be one of + * the special value listed in enum tpm_nv_index. + * + * @param index index of the area + * @param data output buffer of the area contents + * @param count size of output buffer + * @return return code of the operation + */ +uint32_t tpm_nv_read_value(uint32_t index, void *data, uint32_t count); + +/** + * Issue a TPM_NV_WriteValue command. This implementation is limited + * to write the area from offset 0. The area index could be one of + * the special value listed in enum tpm_nv_index. + * + * @param index index of the area + * @param data input buffer to be wrote to the area + * @param length length of data bytes of input buffer + * @return return code of the operation + */ +uint32_t tpm_nv_write_value(uint32_t index, const void *data, uint32_t length); + +/** + * Issue a TPM_Extend command. + * + * @param index index of the PCR + * @param in_digest 160-bit value representing the event to be + * recorded + * @param out_digest 160-bit PCR value after execution of the + * command + * @return return code of the operation + */ +uint32_t tpm_extend(uint32_t index, const void *in_digest, void *out_digest); + +/** + * Issue a TPM_PCRRead command. * - * @sendbuf - buffer of the data to send - * @send_size size of the data to send - * @recvbuf - memory to save the response to - * @recv_len - pointer to the size of the response buffer + * @param index index of the PCR + * @param data output buffer for contents of the named PCR + * @param count size of output buffer + * @return return code of the operation + */ +uint32_t tpm_pcr_read(uint32_t index, void *data, size_t count); + +/** + * Issue a TSC_PhysicalPresence command. TPM physical presence flag + * is bit-wise OR'ed of flags listed in enum tpm_physical_presence. + * + * @param presence TPM physical presence flag + * @return return code of the operation + */ +uint32_t tpm_tsc_physical_presence(uint16_t presence); + +/** + * Issue a TPM_ReadPubek command. + * + * @param data output buffer for the public endorsement key + * @param count size of ouput buffer + * @return return code of the operation + */ +uint32_t tpm_read_pubek(void *data, size_t count); + +/** + * Issue a TPM_ForceClear command. + * + * @return return code of the operation + */ +uint32_t tpm_force_clear(void); + +/** + * Issue a TPM_PhysicalEnable command. + * + * @return return code of the operation + */ +uint32_t tpm_physical_enable(void); + +/** + * Issue a TPM_PhysicalDisable command. + * + * @return return code of the operation + */ +uint32_t tpm_physical_disable(void); + +/** + * Issue a TPM_PhysicalSetDeactivated command. + * + * @param state boolean state of the deactivated flag + * @return return code of the operation + */ +uint32_t tpm_physical_set_deactivated(uint8_t state); + +/** + * Issue a TPM_GetCapability command. This implementation is limited + * to query sub_cap index that is 4-byte wide. * - * Returns 0 on success (and places the number of response bytes at recv_len) - * or -1 on failure. + * @param cap_area partition of capabilities + * @param sub_cap further definition of capability, which is + * limited to be 4-byte wide + * @param cap output buffer for capability information + * @param count size of ouput buffer + * @return return code of the operation */ -int tis_sendrecv(const uint8_t *sendbuf, size_t send_size, uint8_t *recvbuf, - size_t *recv_len); +uint32_t tpm_get_capability(uint32_t cap_area, uint32_t sub_cap, + void *cap, size_t count); -#endif /* _INCLUDE_TPM_H_ */ +#endif /* __TPM_H */ |